Hi all and happy holidays.
After days of failed attempts I finally decided to register here and ask for help (I've been lurking the forum for now, but never registered).
So here's the problem - I have a Huawei Honor 4C with Marshmallow and EMUI 4 (rooted). I restored it's virtual gyroscope by copying a gyro enabler XML, however I have a very annoying problem with it. Basically-is too jittery, which gets uncomfortable for viewing quite fast (especially if I play a stream vr game or watch video). I tried to install xposed framework with the intention to use the gyroscope denoiser available there. After the installation however my phone went in a bootloop, so I was forced to remove xposed. I was wondering if there are other options for denoising the jittery gyroscope, or to install and implement the xposed module without having xposed framework? Or if there's a way to install xposed without getting the bootloop problem...?
Any help will be greatly appreciated.
Possible fix?
Happy new year!
Sorry to bump my own thread, but I found something that can potentially help. Only problem is, I don't know how to use it.
So I found this link: www built io/blog/applying-low-pass-filter-to-android-sensor-s-readings
As the name suggests it had some information on how to apply low pass filter to the sensors. So any ideas if this could work? Also how to implement it?
Hello
Just found your thread.
I have a honor 4x marshmallow rooted. Applied the XML file too. The jittering happens for me when standing still. About Xposed, after first reboot after install, it is not bootlooping, it's just taking its time. Give it at least 30 minutes. I have gyroscope noise filter installed but it has lot of variables to change. The modifications aren't noticeable. Mainly, changing the stationary threshold value is what should work.
Hope it helps.:good:
Related
Hey,
I didnt know where i should Post my Bug Report so if its the wrong section dont hold back to tell me.
I'm currently using my Galaxy S2 for daily use and after flashing some Kitkat Roms Omni is in my opinion the most stable rom and with Nova + ART a damn fast Rom, so thank you very much for supporting my Device.
I dont know whats happening the last weeks but it all began with an Opendelta Issue, i wiped all Data / Factory Reset via TWRP and flashed the Rom completely new and OpenDelta still didnt work, it just said every day its all up2date. Now after a couple of days it is working again, dont know if it was a Server Issue or something else - at the official Omni Page no one post News so i have always to guess whats happening
Currently i found 2 Bugs, if you want to call someone you open up the Dialer and then the Button for the Numbers but after clicking it, theres nothing(Screenshot is attached). You have to go back and try it again then the Numbers are there. The second Problem is that there is no Zoom in the AOSP Camera App if you record a Video. My currently workaround is the Google Camera App, there all is working fine. Also there are some Issues with Apollo , freezing , doesnt update the Song DB etc. , dont know why its so popular - its horrible. Replaced it also with a 3rd party App - Omich/Rocket Player.
The last Problem is that not everywhere in the Settings the correct language is used, if you need some translation help im sure many users would like to help(including me) but that is in my opinion nothing critical .
...and sorry if my Text was hard to read, its not my native language but im working on it :silly:
Regards
Per the FAQ, this is not the place to put bug reports.
However, I9100 hasn't been maintained in a long time, so filing a bug report will be a waste of time. Support for this device is currently going to be dropped with Android 5.0, and if it receives 4.4 bugfixes, that'll have to come from a new maintainer as none of the former maintainers have time/motivation for the Exynos 4210 devices these days.
Some of the issues you describe with Apollo aren't Apollo issues, but the result of a very deep-down core bug that has a side effect of screwing up storage access. This bug has been known for nearly a year (there's a big thread disucssing it somewhere around here...) and still no one has found a fix for the root cause. In fact, it's one of the #1 reasons the device is getting dropped for L. (It will absolutely not receive nightlies unless someone finds and corrects the root cause.)
Hey,
Thank you for your response. :good:
I reported the Bug on jira and there is a workaround for the Dialer Bug: Setting The Animator Scale higher than 0.
The Drivers are the problem right?
pfxandroid said:
Hey,
Thank you for your response. :good:
I reported the Bug on jira and there is a workaround for the Dialer Bug: Setting The Animator Scale higher than 0.
The Drivers are the problem right?
Click to expand...
Click to collapse
Well, there are three things you listed:
1) Dialer stuff - probably some sort of odd HDPI issue and/or graphics subsystem stuff. The Exynos4 graphics subsystem is why many developers don't want to ever touch the platform again.
2) Zoom in video - What resolution was Google Camera? Zoom has NEVER been available for 1080p resolutions on the Exynos 4210 family, not even stock firmware will zoom in 1080p
3) The storage issues are a symptom of a deep-down kernel bug that no one has found the root cause of. This is the #1 reason the device is getting dropped for 5.0 - there is no chance even if a new maintainer steps up that nightlies will resume until someone tracks down the root cause of this one. http://forum.xda-developers.com/showthread.php?t=2612329 has more discussion (warning: It's long...)
gentlemen,
I'm back, with a what I hope is a minor issue. I hope someone can help me.
I have the following head unit (Universal Model):
KLD Universal model S07 - RK3181 (quadcore)
800x480 resolution - KK 4.4.4_23072015
MCU version MTCB-KLD2-V2.67 (Jul 09 2015 19:15:51)
Kernal version 3.0.36+ [email protected] #396 (Wed Jul 22 17:40:16 CST 2015)
Build number RK3188-ENG4.4.4 23072015.09:09:11
CPU ARMv7 1.6Ghz (x4)
It is rooted via the factory settings method. But other than that it is pretty much still stock (I added a cooling fan). The only other apps I add where PowerAmp, PowerAmp Toast, Xposed Framework, XposedMTC, and Lucky Patcher (I believe this app fully unlocks the PowerAmp app). I have had no issue with it for the last 7 months.
However, the other day it took a long time to bootup. Now I have some google service errors: "the process com.google.process.gapps has stopped"
I have to keep on clicking "OK" in order for the error pop-ups to close. I have to repeat this several times until all the pop-ups finally stop. Other than that, everything else is working properly. Although I notices that Xposed and PowerAmp Toast do not start (no icons on the top notice bar).
I tried going to Settings/App Manager/Google Service Framework - and then I click Forces Stopped it, Disable, Clear Data, Clear Cache, Enable. Then I reboot, but I still get the same google service errors.
Can someone please help me fix this? Any help will be greatly appreciated.
Thanks,
Galo
PS - One other thing. This is related to the XDA website in general. How can I get rid of that stupid side panel (Analysis & Opinion / More XDA New). It keeps on automatically scolling and gets in the way of reading and typing. It is really annoying. Can someone tell me how to switch this off. Thanks again
I have the same unit. I flashed the rom. Works better than stock but not too great. Remember, this is Android 4.4.4.
Here is the thread in which I flashed.
http://forum.xda-developers.com/showthread.php?t=3246370
WARNING: Read all you can and back up your rom BEFORE you do anything. If you don't you will regret it. Also, there are more than one type of unit like this. The resolution makes a HUGE difference. Download a resolution app from Google Play to discover what resolution your unit is. If you download and install rom with incorrect resolution you will brick your unit!
Hello,
Can someone please please please tell me how I can get rid of this stupid side panel on the XDA website (Analysis & Opinion / More XDA New). It keeps on automatically scolling and gets in the way of reading and typing. It is literally in the middle of the screen and it is really annoying. Can someone tell me how to switch this off. I am using IE-11.
Thanks again
Galo
http://en.miui.com/download-274.html
Author: MIUI Official TeamVersion: V9.6.3.0.LHMMIFD (MIUI9) Size: 960M
Do not update!!!! Can't update apps via play store, camera settings crashes. Can't install from playstore... Awful update. Dex2oat process is killing battery. Stay away from this update
well, I installed, and I had problems with the google play , google drive, gmail etc.. manually I downloaded apk and installed.. now working for me however, better to have clear that working from start.. battery no more than a day ...
After playing for a few months with LOS & its variants, I returned to MIUI official ROM (MIUI Global 9.6.3.0). After I made a clean flash, I did the "magic" two-line-modification in build.prop, and I must say that now it works much better than with LOS&Co before (at least with me!)
- no more camera and video problems
- no more slowness (especially Google apps were very very slow)
- overall speedness of phone is significantly improved
- SOT is much better
- no problem with Safetynet: I have green marks for both ctsProfile and basicIntegrity in Magisk without doing any modifications
The only drawback is that I cannot change the region, there is only one option: Chinese (no problem with languages), but to say the truth I didn't experience any disadvantages beacuse of this so far.
I have one small problem: rich formatting option is completely missing from Gmail (maybe it's due to Chinese region...?), and I would badly need it.
Anyone with the same issue?
Yaelede said:
After playing for a few months with LOS & its variants, I returned to MIUI official ROM (MIUI Global 9.6.3.0). After I made a clean flash, I did the "magic" two-line-modification in build.prop, and I must say that now it works much better than with LOS&Co before (at least with me!)
- no more camera and video problems
- no more slowness (especially Google apps were very very slow)
- overall speedness of phone is significantly improved
- SOT is much better
- no problem with Safetynet: I have green marks for both ctsProfile and basicIntegrity in Magisk without doing any modifications
The only drawback is that I cannot change the region, there is only one option: Chinese (no problem with languages), but to say the truth I didn't experience any disadvantages beacuse of this so far.
I have one small problem: rich formatting option is completely missing from Gmail (maybe it's due to Chinese region...?), and I would badly need it.
Anyone with the same issue?
Click to expand...
Click to collapse
How do you fix them?
Sylph7 said:
How do you fix them?
Click to expand...
Click to collapse
There was nothing to fix. Just made a clean install + build.prop edit + Magisk. That's all.
The same problem. But I can't update or delete system programs at all. They "disappear" in Titanium or Root Explorer for a moment and then you refresh the folder and they're there.
Totally broken update. Trying to find 3rd party firmware that would work.
Unfortunately applied themes always get reverted after a short while - is there any solution for that?
Hello,
Which is the last "official" GLOBAL ROM for RN2?
This one is on my phone now: miui_HMNote2Global_V9.6.3.0.LHMMIFD_83711029cc_5.0, which otherwise works perfectly, but has a small drawback: you can only choose Chinese region, there is no other, and it has some minor disadvantages..
After a long search I found: xiaomi.eu_multi_HMNote2_V9.2.3.0.LHMCNEK_v9-5.0
Can this be the last? Or is there another one? (the point is region choice)
Thanx
I am using that chinese version. IMO it is the latest stable one. The most annoying topic is that built in camera often freezes phone and then rapidly drains battery and OpenCamera cannot be used. Besides that reverting themes is another drawback but a minor one.
Google Play Service no edit build.prop
Hi there
This Google play services is latest version 19.8.31 (020408) and it's working flawlessly on my Redmi Note 2 (MIUI 9 v9.6.3.0 LHMMIFD), no need to change anything like editing build.prop, just install and your RN2 can continue using all Google apps.
Download or search on apkmirror this apk =
Google Play services 19.8.31 (020408-284611645)
ENJOY
Hi guys. It's been a while, when I was playing with custom ROMs and stuff years ago. Most things forgotten now, so please help me to recall some things I'm using the Oneplus 5 8/128 version, original OOS (9.0.5 now), and no root at all. The standard background processes limit is not enough. I realized that even the Lux Brightness is killed after some hours. With 8gigs of RAM? Why? Anyway, please help me achieve that:
- I don't need root at all
- I extensively use Google Pay, thus I need SafetyNet working too
- most probably, I only would need a modification of build.prop file
- most probably I would need to flash custom Recovery
What is fresh and current way to do it? If that is possible, I want it all without loosing any data. If that is not possible, OK I can setup it all from scratch.
Please point me to the correct knowledge here on XDA - I feel a bit lost. So I was helping the community years ago, now I'm asking for help for myself
P.S. maybe, there is a way to modify the system automatic brightness somehow, to behave similar to Lux Brightness? The system one is very bad, too dark/too bright and reacts foo fast for me...
twinsen.net said:
Hi guys. It's been a while, when I was playing with custom ROMs and stuff years ago. Most things forgotten now, so please help me to recall some things I'm using the Oneplus 5 8/128 version, original OOS (9.0.5 now), and no root at all. The standard background processes limit is not enough. I realized that even the Lux Brightness is killed after some hours. With 8gigs of RAM? Why? Anyway, please help me achieve that:
- I don't need root at all
- I extensively use Google Pay, thus I need SafetyNet working too
- most probably, I only would need a modification of build.prop file
- most probably I would need to flash custom Recovery
What is fresh and current way to do it? If that is possible, I want it all without loosing any data. If that is not possible, OK I can setup it all from scratch.
Please point me to the correct knowledge here on XDA - I feel a bit lost. So I was helping the community years ago, now I'm asking for help for myself
P.S. maybe, there is a way to modify the system automatic brightness somehow, to behave similar to Lux Brightness? The system one is very bad, too dark/too bright and reacts foo fast for me...
Click to expand...
Click to collapse
Just for information I recommend to read my post here https://forum.xda-developers.com/on...xygenos-4-5-2-7-1-1-ota-t3627003/post79029897 including the search around this topic :good:
Question guys. Possibly brought up months ago, idr. Im on CPT right now.
Thats Coronavirus People Time
Not....not the other one.
Anyway back when, i remember adjusting some build.props in busybox to where stock camera utilised all 3 rear lenses simultaneously. It looked great. This was regular photo mode and whatever reason cleared up that red/dark tint plenty people had with ultra wide nightscape in particular. I got ahold of a more recent kali linux for personal reasons unrelated but it came with apktool. Curious if anyone has experience with this at all as im not the biggest gcam fan (it is what it is, chill) for a couple reasons but the biggest being long exposure. For example stock camera at 30 seconds will collect light and data before the shutter click whereas gcam does the shutter click first, followed by collection. So unless i got starcam mod (that worked) my night sky photos would be entirely too dark. No i dont want to excessively up the iso and wait forever for processing. A nice 30 seconds and 320 with farthest focus works awesome on stock followed by minimal lightroom adjustments. Point is i DO want to use either superwide or the combo that i mentioned earlier in pro mode. Inb4 search forums, i honestly dont have the time so if already mentioned in a way, a link would be appreciated. Any other advice with anything else like buildprops or what latest apk is that works with this device would be awesome. If anyone has modded a newer UI to work for this, id like to know as well if possible. Thanks frens
If you are unable to simply google what you are looking for, & you know what terms to use since you seem like a photographer:
Then you'll have to probably make this. I hate the stock camera apps and all the google play store stuff too.
I just wish we could have a Canon quality camera on a phone and PC webcam.
Is it really that hard ???
Good luck. I hope you get into programming and I get to use your camera app!
Im not, just been a while since messing with anything. Had bookmarks etc from hours and hours of searching where to find the files to edit (using the phone, rooted magisk) various strings and found some stuff thatd work some that wouldnt and crash the app but its like
All im saying is for example with gcam (and others)
You can have exposure time of 60 seconds where op stock is limited to 30. So its not a hardware thing rooted or not. Definitely software. Apkstudio is basically above but gui. I know some people find things easier unix/linux related (like android) to do from linux in the first place instead of cross platform. Some things are just easier. Wasnt really sure how active anyone is on this device anymore. An easier goal would really just be getting the newer UI, pre android 11 betas, to work but idk nothing about that either. And if i did this shutdown stuff past 6 months really got everything throwed off.