Hello, I have lost all simcard communication, no sms/call. I was first using rom: "[ROM] [6.0.1] Unofficial Paranoid Android - Jiayu S3". Everything was fine but I wanted to try out: "[ROM] [6.0.1] Unofficial AICP11 MM - Jiayu S3". This rom was a mess for me, no sms function and no calls. I tried to solve it myself by flashing a bunch of modem zips from the Jiayu S3 modem thread but nothing worked. I gave up and went back to the first rom that I mention and now nothing works as well on that rom.... So no sms sending receiving and no calls out/in. Do roms come with their own modem? If so what modem was the first rom that I mention packed with?
perhaps you lost imei?
try to Flash RC4 or RC5 with flash tools.
you can find on needrom.com
JiaYu S3, Nougat 7.1
OT wich backup app can be used with systemless root does anyone knows something it goes about normal apps that have no restore function for data ot end
Gesendet von meinem S3 mit Tapatalk
gorillaz_gr said:
perhaps you lost imei?
try to Flash RC4 or RC5 with flash tools.
you can find on needrom.com
JiaYu S3, Nougat 7.1
Click to expand...
Click to collapse
Problem solved, it was indeed a missing imei, smsc was also missing.
Related
Hey there,
I am an active reader of this forum for 4 years now - thank you for all the information - and have a uncommon problem with my nexus 4,
yesterday i upgraded my purity rom to the actual build and have no cellular connection since then 8excuse me for my english right away)
What seems to be a trivila problem is kinda tricky (of course a looked a lot for possible causes and resolves in the forum).
the problem is: i have flashe the actual bootloader, radio and made a factory image flash and my nexus is working when on stock rom.
but when i flash a custom rom - i tried purity, psx and cm 10.1 - the cellular connectivity and in some cases wifi is gone. once i flash the factory image everything is fine again.
can you imagine a possible explanation?
one more information: when flashing the new purity update, i accidentally flashed not the current one, but the 2 month old version... but i allready made a clean-flash, wiping everything and flashing just the rom.
i'm on the most recent bootloader, radio und cwm-recovery
Any idea? Thanks in advance...
alex
update to latest recovery for either cwm or twrp its a common issue that many have posted issues about
hey,
it worked, reverted to an earlier cwm build and it works again. thank you very much
I've been looking for custom roms with android 5.0 (lollipop) to flash on my Samsung Galaxy S4 SGH-i337m (jfltecan), however I can't find any. I know Cyanogen mod has cm12 for the jflte but not for jfltecan, can I still flash cm12 for jflte on my device or will it brick it? I used to have an s3 and I flashed carbon rom for d2att, edited some lines as to bypass status 7 and it worked fine. I was just wondering if I could do the same for my s4. Thanks!
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
Simax8 said:
I've been looking for custom roms with android 5.0 (lollipop) to flash on my Samsung Galaxy S4 SGH-i337m (jfltecan), however I can't find any. I know Cyanogen mod has cm12 for the jflte but not for jfltecan, can I still flash cm12 for jflte on my device or will it brick it? I used to have an s3 and I flashed carbon rom for d2att, edited some lines as to bypass status 7 and it worked fine. I was just wondering if I could do the same for my s4. Thanks!
Click to expand...
Click to collapse
I'm using the GPE ROM, its great!! Rogers i337m
Sent from my GT-I9505G using XDA Free mobile app
Simax8 said:
I've been looking for custom roms with android 5.0 (lollipop) to flash on my Samsung Galaxy S4 SGH-i337m (jfltecan), however I can't find any. I know Cyanogen mod has cm12 for the jflte but not for jfltecan, can I still flash cm12 for jflte on my device or will it brick it? I used to have an s3 and I flashed carbon rom for d2att, edited some lines as to bypass status 7 and it worked fine. I was just wondering if I could do the same for my s4. Thanks!
Click to expand...
Click to collapse
I'm on sgh-i337m with cm12 for the jflte and it's working great you need to change the name of device in updater script and all is working
sorry for my bad english
mugensiz said:
I'm on sgh-i337m with cm12 for the jflte and it's working great you need to change the name of device in updater script and all is working
sorry for my bad english
Click to expand...
Click to collapse
So you are not having any issues at all? I am considering doing this. Do you have a link to a guide you used?
I use the AntaresOne Rom from this Link http://forum.xda-developers.com/showthread.php?t=2557353 with my sgs4 (sgh-1337m) from Fido and the only issues are wifi is kinda wonky(doesn't always save network info, doesn't always connect, sometimes drops connexion, but it DOES work fine when connected) and battery sometimes drains really fast. NB that this last issue has been labelled "cosmetic" by someone who knows a great deal more than me about Android. I have NEVER had my phone run out of battery and shutdown., just some days at 6pm it says 25%, other days it reads 76%. Kinda random. About to test the "Danvdh's GPE Edition ROM" 5.0.1 Lollipop, will post when I can confirm working or not.
EchoeROM is a good one.
No service after flashing...
I was on SlimKat 4.4.4 which was good, but wanted to upgrade to Lollipop after seeing it on my Nexus 5 (which is now broken). I have a Bell SGH-I337M
I first tried the CM12 Optimized build, wouldn't ever get past the boot screen...
Tried GPE, and it installed and ran fine, but my service was cutting in and out (so basically useless)
Tried SlimLP, it also installed fine but I was having the same service problem as with GPE.
How are you guys installing these ROMS? The only info I could find to fix the problem involved modem/radio.. I tried flashing a LP modem with the ROM but it didn't work. And all the radio-related information was from 2011 so I didn't bother with it. Any help would be much appreciated, I've been messing with this for 2 days now and get seem to fix it
Dear Community,
I hope that this is the right place to post and any of you can help me.
My (aktual) Hardware/Software bits:
Galaxy Note 3 (SM-N9005)
Android: 5.1.1
Baseband-Version: N9005XXUGBOD3
Kernel-Version 3.4.108-f2fs-temasek-cm12.1-hlte-v1.25+
temaseksnappy #1
Temasek unofficial version V16.4
Build: LMY48J test-keys
Recovery: twrp 2.8.7.0-hlte-4.4
My actual problem is the following: My Note 3 by default had a 4.4.2 OFW on it, which I early upgraded to Lolipop 5.0.1. Everything works for the OFW 4.4.2 and 5.0.1 fine. As soon as I try to flash it with a CFW like CM11, CM12, CM12.1, CM12.1 (temaseksnappy), Gummy 4.4.4 I am losing the feature of auto rotation.
Of cource I did a clean flash, wiping DALVIK/CACHE/DATA and system, double time even one befor the flash, one after.
I also tried to put the battery, sim and sd out for few min before rebooting, while autorotation is manualy turned off.
Even a MODEM I flushed to fix this issue, but without success. Nothing helps but going back to OFW.
My last try was downgrading to the original 4.4.2, including baseband trieing from there to go to any CFW (CM11) as well as from OFW 4.4.2 -> OFW 5.0.1 -> CFW 5.1.1 (http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375)
There was also a post about a possible missing or broken lib in /system/lib which I replaced
Nothing helps (libGNU... something). This helped me alreay once in OFW after kicking out all the junk apps, but this is a different storry and not related anyhow.
Is there anybody out there who has the same problem or even better knows a solution?
My shot would be that:
1) CM has a problem with my particular hard-/software (Kernel, Baseband, Recovery, whatever) as I just tied CM or at least CM based CFWs.
PLEASE HELP.
Thank you very much in advance.
After about almost a year I cam back, giving again a try to CM, However I still have the same issue. Finally Anybody please!
Do you have the same issue with touchwiz 5.1.1 and 6.0.1?. Not the cm/aosp roms which aren't samsung based.
Sent from my SM-N920C
Rosli59564 said:
Do you have the same issue with touchwiz 5.1.1 and 6.0.1?. Not the cm/aosp roms which aren't samsung based.
Sent from my SM-N920C
Click to expand...
Click to collapse
Hello,
Thx for your reply. Right now I am on CM13 (temasek hlte v9.6)
http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375
This might should be specially compiled for sm-n9005 like mine.
Everything expect rotation works fine. However The accelleration is also working fine as I tested with "sensor test". Even the integrated camera App is rotating, however the rest is not.
In addition I downloaded "adaptive rotationfree", If I set it "stock Auto" nothing happens, but if I set it to "force auto" the rotation will work exacly once and then stops undtil I force it to portrait again.
What do you mean exactly with "touchwiz"? Is this jus a different kernel or a whole CFW?
As I wrote in the frist post I tried already a lot of CFW and ALL had this issue, but the OFW ;(
What shell I flush to get this working, which is not OFW?
BIG THX for YOUR HELP
Touchwizz is the firmware that comes with the stock Samsung firmware .
Also in custom Samsung based roms .
Hello,
thx for the tip with TouchWiz vs aosp. At the moment I am running "DarkLord N5 Release Candidate 2.12" which can get find here: http://forum.xda-developers.com/galaxy-note-3/development/rom-darklord-s6-port-alpha-t3083087
This Rom is TouchWiz Based and guess what ....
Autorotation works.
However I do not understand what the problem realy is and would prefer to run cm13 insteat. I mean even samsung devices got a accellerator within which works also fine with AOSP software, showing numbers moving while turning the phone. In addition for example on the post http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375 it is said that this is explicite for note 3 including the model n9005. So ...
Can anybody point me to the problem or even better to the fix?
Is there any chance CM would fix this?
Regards
Hello,
I have a couple of problems with my Samsung Galaxy S III Duos (I9300). CM 12, CM 12.1.
1. I cannot switch to use Internet from another sim card. It always uses just one of them. I tried swapping cards, It just chooses one of them, not always sim in slot 1.
2. Problem with Bluetooth in car (BMW, CCC). When I call (incoming/outgoing call) from one sim card everything is fine. When I call from another sim, car answers the phone and shows duration of a call, but no sound.
U are using latest build?
ziad311 said:
U are using latest build?
Click to expand...
Click to collapse
I noticed these bugs when I was on CM12 or CM11 (not sure which one, November 2015 release, Android 5.0.1 if I'm not mistaken), flashed back to stock 4.4.4, both bugs disappeared, so I guess it was not a hardware problem. Then I tried CM 12.1 20151225 release, both bugs were still in the ROM, so I flashed 4.4.4 again.
Can anyone confirm if they have the same bugs or if they are known at all.
Thanks.
Flash latest cm12.1 not cm12
Android 5.1.1 not 5.0.2
ziad311 said:
Flash latest cm12.1 not cm12
Android 5.1.1 not 5.0.2
Click to expand...
Click to collapse
As I already wrote I did flash CM12.1 dated 25.12.2015 from here
http://forum.xda-developers.com/galaxy-s3-neo/orig-development/rom-cyanogenmod-12-1-s3-neo-t3099384
It didn't work either. Is it possible that I chose the wrong GApps and this was the reason?
I think I used open gapps stock version, but not sure, don't have that SD card and can't check now.
i have used CM12 and 12.1 rox and RR and i don't recall these two problems that you have mentioned specially the internet problem to me it was perfect but with a little reboot here and there so soory i couldn't help.
P.S :soory for my bad english
Hello hai to everyone..
Recently i flashed official lineage 14.1 os custom rom on my zuk z1 but I'm faced calling sim switch problem And i found that calls with option is disabled..Not able to enable it,I think it's a major bug...can anyone fixed please let me know.
I tried with both airtel Sims and as well as airtel and jio sims but problem is still unresolved only one sim is working to make a call even i though I'm using two airtel sims but not able to switch between them.
But I'm receiving messages as well from second sim only calls switching between sims is not working...first sim always enabled as the default sim to make a call.
I'm also unable to see the call screen while in a call therefore unable to hang up or dial numbers during a call. It simply does not appear at all (after selecting the person to dial it just rings them in the background)
I am also face this problem
I think this is one of the major issue every Zuk Z1 user is facing. Same here. Probably we should ask the users who has upgraded from CM 13 to LOS 14.1 and check even they are facing this dual sim bug or not...also I think flashing Zui will solve the problem, but is the image/zip file for Zui 2.5 (Android 7.0) is available anywhere?
Sent from my ZUK Z1 using Tapatalk
pauldroid said:
I think this is one of the major issue every Zuk Z1 user is facing. Same here. Probably we should ask the users who has upgraded from CM 13 to LOS 14.1 and check even they are facing this dual sim bug or not...also I think flashing Zui will solve the problem, but is the image/zip file for Zui 2.5 (Android 7.0) is available anywhere?
Sent from my ZUK Z1 using Tapatalk
Click to expand...
Click to collapse
I tried all possibilities upgraded from CM13 to LOS14.1 Still problem is there.It's a major bug they have to fix it.Now u guys can use hexagon Nougat Rom as alternative it's working fine..
srk2521 said:
I tried all possibilities upgraded from CM13 to LOS14.1 Still problem is there.It's a major bug they have to fix it.Now u guys can use hexagon Nougat Rom as alternative it's working fine..
Click to expand...
Click to collapse
Hexagon for Z1? I flashed the same on Yu Yuphoria and in the first boot, the boot logo kept on animating for half an hour, I gave up hope and flashed RR (Nougat). With Z1, any such issues did you face? And sim bug is gone or what because after LOS 14.1, I flashed RR 5.8.2 hoping the bug will go away, but that's not the case.?
Sent from my ZUK Z1 using Tapatalk
pauldroid said:
Hexagon for Z1? I flashed the same on Yu Yuphoria and in the first boot, the boot logo kept on animating for half an hour, I gave up hope and flashed RR (Nougat). With Z1, any such issues did you face? And sim bug is gone or what because after LOS 14.1, I flashed RR 5.8.2 hoping the bug will go away, but that's not the case.
Sent from my ZUK Z1 using Tapatalk
Click to expand...
Click to collapse
sims working perfect and I haven't faced any problem but before flashing make sure that you have to wipe data,cache,system,boot folders.Take a backup before doing this process.
thank you.
srk2521 said:
sims working perfect and I haven't faced any problem but before flashing make sure that you have to wipe data,cache,system,boot folders.Take a backup before doing this process.
thank you.
Click to expand...
Click to collapse
Great! Will give a shot. One last query, is it pre-rooted?
Sent from my ZUK Z1 using Tapatalk
pauldroid said:
Great! Will give a shot. One last query, is it pre-rooted?
Sent from my ZUK Z1 using Tapatalk
Click to expand...
Click to collapse
YES it's pre-rooted.
thank you.
I also have sim switching​ problem in my zuk z1 after installing Los 14.1.......
The call switching problem occurs since the baseband is not updated to correctly interact with Nougat. (As far as I know)
Flashing the ZUI zip corrects that since the modem is also updated, ZUI being an official software, and the company providing the updated modem files.
You can try updating the modem only, using fastboot commands in the bootloader with the modem file from ZUI zip and onto the modem partition.
Or you can wipe the device and do clean installs twice with ZUI, and LineageOS again.
Here's the link for ZUI 2.5 (Nougat) I used :
https://forum.xda-developers.com/zuk-z1/orig-development/beta-zui-v2-5-115-t3539841
**It worked for me**
nschdeva said:
The call switching problem occurs since the baseband is not updated to correctly interact with Nougat. (As far as I know)
Flashing the ZUI zip corrects that since the modem is also updated, ZUI being an official software, and the company providing the updated modem files.
You can try updating the modem only, using fastboot commands in the bootloader with the modem file from ZUI zip and onto the modem partition.
Or you can wipe the device and do clean installs twice with ZUI, and LineageOS again.
Here's the link for ZUI 2.5 (Nougat) I used :
https://forum.xda-developers.com/zuk-z1/orig-development/beta-zui-v2-5-115-t3539841
**It worked for me**
Click to expand...
Click to collapse
How do you update the modem only? A little help would be much appreciated
P.s. i tried flashing Zui 2.5 306 something then flashed a nougat rom(nuclearom), sim problem still persists
mrkentoy said:
How do you update the modem only? A little help would be much appreciated
P.s. i tried flashing Zui 2.5 306 something then flashed a nougat rom(nuclearom), sim problem still persists
Click to expand...
Click to collapse
Try flashing NON-HLOS.bin from the zui zip using "fastboot flash modem *filename*" in bootloader mode.
**I haven't tried this so do take backup.**
And my problem was solved by clean flashing ZUI only. I used 2.5.115 beta version. I am currently using LineageOS, latest nightly from 4 April.
nschdeva said:
Try flashing NON-HLOS.bin from the zui zip using "fastboot flash modem *filename*" in bootloader mode.
**I haven't tried this so do take backup.**
And my problem was solved by clean flashing ZUI only. I used 2.5.115 beta version. I am currently using LineageOS, latest nightly from 4 April.
Click to expand...
Click to collapse
Ok sir. I will try to do those things. Thank you
mrkentoy said:
Ok sir. I will try to do those things. Thank you
Click to expand...
Click to collapse
Don't forget feedbacks please.
Radhouene90 said:
Don't forget feedbacks please.
Click to expand...
Click to collapse
I tried. Still nothing. Sad.
Edit. My baseband version is 0.1.c1.10-00004-M8974AAAAANAZM-1
mrkentoy said:
I tried. Still nothing. Sad.
Edit. My baseband version is 0.1.c1.10-00004-M8974AAAAANAZM-1
Click to expand...
Click to collapse
I removed the sim card , made a clean and insert it again. The problem did not occured again since yesterday. I will give you feedback if it will occure again. Try it
Radhouene90 said:
I removed the sim card , made a clean and insert it again. The problem did not occured again since yesterday. I will give you feedback if it will occure again. Try it
Click to expand...
Click to collapse
Thanks. I will try that if i have time. Did you remove both sims?
mrkentoy said:
Thanks. I will try that if i have time. Did you remove both sims?
Click to expand...
Click to collapse
Yes bro
Solved : https://youtu.be/E2P4sZvpXPE