The purpose of this thread is to have all information regarding the Weloop Tommy, gathered, fresh and to the point.
(i am not affiliated with Weloop)
Please read both post number 1, 2 and search thread before asking questions thank you.
FAQ
Q:What is the latest firmware?
[Release] black watch v3.19 firmware update notifications [Copy link]
This update to the firmware update, the client does not update the current firmware version v3.18 firmware watches friends can try to use the old client detects the firmware update.
Update:
Solve watches restart, restore factory settings watches language will change.
Download Link:
iOS client 2.079: http://fir.im/iosobt
Android client 1.29.3702b: http://fir.im/andobt
Unofficial file archive of WeLoop Tommy. APK-Files with ending "b" are BETA http://www.wtf.li/
Q: When is the next app update
A: Weloop v. 3.0 will be released as closed beta 7the of March 2015 we don't know when there will be an open english release....
the extensive update 3.0 have,
better health monitoring
profiles
sleep monitoring
more alarms weekdays/weekend
and more.
(see attached pictures for app version 3.0 UI improvements
Q: What does the settings do?
- Backlight
24H: Backligth always turns on when button is pressed
Nite: Backligth turns on when button is pressed at night time (from 17–8)
Off: Backligth Always Off
- Motion
24H: Motion detection always on (backlight turns on when motion is detected)
Nite: Motion detection on at night time (from 17-8)
Off: Motion detection Off
- Night
On: Notification vibration disabled at night (from 23–8)
Off: Notification enabled at night
- O Clock
On: every whole hour the watch will vibrate. 12'O'clock etc.
Off: Off
- Fitness
On: Fitness functionality on
Off: Off
- Language
Chinese
English
- Anti Loss
On: Alarm when Phone is out of BT range
Off: Off
Q: Is there Cyrillic support
A: Yes
Q: The GoClever Ecos Chronos is the same watch right?
A: Yes it is on the hardware side, and you can with a "hack" install the firmware from the ECOS on the Tommy. (see next post for How to.!)
Awesome Weloop Review by VECTRON
http://forum.xda-developers.com/smartwatch/other-smartwatches/weloop-tommy-smartwatch-looks-best-t2864444
Troubleshooting
Q: i can not update my watch/its stuck/acting weird
Have you tried to reset the watch? there are 3 ways to do it
Restart watch from app. under update there is a restart button (it says reset but it restarts and keeps all your settings)
Reset from watch (Last menu point, this resets everything)
Hard reset (connect charge cable and press up and down button to reset)
Force OTA update:
Connect your watch to the charger. (watch must be charging)
Press all 3 buttons on the side simultaneously
Release the 2 side buttons, and keep the middle button pressed until you get the upgrade connecting display. (this might take some seconds)
Delete connection from phone
Connect and pair from app and upgrade
If you are on an Android device and it cannot connect, try an ios device, and vice versa
Q: The watch keeps switching back to chinese
More people have experienced that if the language is non english the watch will reset to chinese. Changing the phone OS to english stops the watch from switching to Chinese.
"Hacks"
How to make your own watchfaces:
user fcsabika has created a cool tool to create your own watchfaces
WeLoop Tommy Watchface Creator
attached are also some watchfaces made by user ruicoel filename "project rui.zip"
How To install GoClever Chronos ECO firmware on Weloop tommy (android only)
Download latest ECO firmware to phone
Disconnect Watch from phone, install ECO app
Go to “Check For Upgrade”
Tap on the middle circle six times
“Select a firmware file___ [Browse]”
Watch must be in forced OTA
Update watch.
You can flash between weloop and Goclever firmware (always be careful and follow instructions when flashing, i take no responsibility for bricked or exploding watches...)
To install weloop firnware, follow same instructions but use weloop app instead.
PROJECT OPEN FIRMWARE (please make sure you understand what this is and what it does before you attemtp to flash your watch)
Make a Weloop Tommy an open source sport watch that can be used without a mobile phone. Want to see a heart rate when running, cycling speed and cadence when cycling or number of laps while swimming? Help to make it possible! LINK
This project is divided into six phases:
Phase 1: find out and document watch pinout so it will be possible to communicate with screen, accelerometer and a flash memory from a custom firmware. DONE
Phase 2: write a custom firmware that will print sample text on a screen and expose a BLE service. Firmware will be flashed using SWD connector. DONE
Phase 3: make it possible to upload a custom firmware using OTA. This will save the waterproof case from destruction. DONE
Phase 4: update softdevice to the newest version (S110 8.0.0). Add possibility to switch to other softdevice (S120/S130) DONE
Phase 5: create a "terminal" firmware that allows to control what is displayed on a watch from an android/iOS app. IN PROGRESS
Phase 6: create a "standalone" firmware using S130 softdevice that can connect to external sensors (HRS, CSCS etc) without a phone. TODO
Go support developer Krzysiek
Goclever APK & FW file is attached to this post.
Latest Chronos ECO firmware 3.18
http://www.chronos.goclever.com:8080/fileServer/firmware/CHRONOSECO_V3.18_1.bin
Chronos ECO app (android)
https://play.google.com/store/apps/details?id=com.yf.foreign.goclever
Chronos ECO IOS app
https://itunes.apple.com/th/app/goclever-chronos-eco/id955306578?mt=8
BUGS & Annoyances
Notification not always deleted from phone when deleted on watch
Watch freezes sometimes
Being able to set the night time manually would be great (This can be done with the Goclever fw)
I'm no Dev so I'm not sure if this is of any help. While updating the watch I wanted to ensure my screen stayed on so I was tapping the screen.
If you tap the center of the percentage 6 times a pop up appears for you to select your update file. If you select browse it gives you access to a bunch of folders that appear to be inside the app or maybe the watch itself. I tried it several times and 6 is the magic number to make the option appear or disappear. It doesn't work if the watch isn't upgrading it's firmware.
Hope it can be of some use
skiiermike said:
I'm no Dev so I'm not sure if this is of any help. While updating the watch I wanted to ensure my screen stayed on so I was tapping the screen.
If you tap the center of the percentage 6 times a pop up appears for you to select your update file. If you select browse it gives you access to a bunch of folders that appear to be inside the app or maybe the watch itself. I tried it several times and 6 is the magic number to make the option appear or disappear. It doesn't work if the watch isn't upgrading it's firmware.
Hope it can be of some use
Click to expand...
Click to collapse
Thanks was this working on ios or android?,
will add to FAQ
taleboblen said:
Thanks was this working on ios or android?,
will add to FAQ
Click to expand...
Click to collapse
Android.
Thx
Thnx for the information, all working ok on my samsung s4, get the last version v3.18.
thx again
backlight
first of all thanks for this thread :good:
the nite backlight on my tommy watch actually comes on after 5PM (17:00)
i am from Slovakia, phone language is English, time zone CET (GMT+1)
interesting to see that yours turns on after 23:00
chsustik said:
first of all thanks for this thread :good:
the nite backlight on my tommy watch actually comes on after 5PM (17:00)
i am from Slovakia, phone language is English, time zone CET (GMT+1)
interesting to see that yours turns on after 23:00
Click to expand...
Click to collapse
Thanks for the update. i decrypted some of the information from the official Weloop FAQ. and yes i can now confirm that you are right. it turns on from 17-8 thanks again. I have now updated the FAQ with the correct time for all Night settings. :good:
Hello! Can someone make last CHRONOS ECO apk link to download? I cant download it from google play.
k0ra said:
Hello! Can someone make last CHRONOS ECO apk link to download? I cant download it from google play.
Click to expand...
Click to collapse
Hi , the chronos eco app is not compatible with the Weloop Tommy.
Brand new Tommy, it was paired with my phone but the connection was unstable, so I tried and forced an OTA update, watch is "Updating... 0 pct" but now the phone cannot detect the watch any more
Resetting the watch will restart it in ota update mode again!
Any help appreciated...
l.capriotti said:
Brand new Tommy, it was paired with my phone but the connection was unstable, so I tried and forced an OTA update, watch is "Updating... 0 pct" but now the phone cannot detect the watch any more
Resetting the watch will restart it in ota update mode again!
Any help appreciated...
Click to expand...
Click to collapse
Happened to me also, try to delete connection under bluetooth settings on device. now connect to to weloop and pair from Weloop app. keep trying and then go to update. again persistence is key. keep trying to update suddenly it will connect and update.
Whas the watch on latest firmware when you tried the force OTA?
are you on android or ios see if there is an updated App for you phone. see link on OP for beta APK.
let me know if it works.
watch was not on latest firmware, cant' remember which version it had.
I'm on android, also v1.24 does not help as check for updates does not go beyond "Checking version...".
k0ra said:
Hello! Can someone make last CHRONOS ECO apk link to download? I cant download it from google play.
Click to expand...
Click to collapse
l.capriotti said:
watch was not on latest firmware, cant' remember which version it had.
I'm on android, also v1.24 does not help as check for updates does not go beyond "Checking version...".
Click to expand...
Click to collapse
Try to update the Weloop app, latest is 1.27.
kill weloop app
delete bt connection from phone.
Open weloop app
conmect and update. Keep trying it can take a couple of times.
If all fails if possible try with other device and or ios device
update: I used an iphone and after a few retries I got it on v3.18.
back to android, but the pairing and the sync is problematic, to say the least, on my Huawei P7...
skiiermike said:
I'm no Dev so I'm not sure if this is of any help. While updating the watch I wanted to ensure my screen stayed on so I was tapping the screen.
If you tap the center of the percentage 6 times a pop up appears for you to select your update file. If you select browse it gives you access to a bunch of folders that appear to be inside the app or maybe the watch itself. I tried it several times and 6 is the magic number to make the option appear or disappear. It doesn't work if the watch isn't upgrading it's firmware.
Hope it can be of some use
Click to expand...
Click to collapse
If it's allowing you to select an update file, surely it is showing you the file system of the phone? Otherwise, you'd have no way to put a firmware update file there to select. My understanding would be this allows you to install a firmware update file stored on your phone, although I can't test this for sure as my Android phone is currently being repaired. There's some discussion about this here and that thread also contains a very small amount of analysis on the firmware file (VERY small amount, basically just analysing the name of the binary file), and another app that is apparently in some way related (link).
For what I can glean from the description of that app (seemingly made by the manufacturer of the SoC [System on a Chip] used in the WeLoop Tommy), it would appear that devices using the SoC (including the Tommy) have three firmwares: "bootloader", "soft device" and "application". The one embedded within the WeLoop app apk has the name "ble_app_ancs.bin"; ble stands for bluetooth low energy and ancs apparently stands for apple notification centre services. That leaves "app" - my guess would be this is the "application firmware". I'm not entirely sure the roles of the "bootloader" and "soft device" firmwares, but my guess is the one or other allows the device to get into "DFU mode" (or "OTA mode" as it seems to be referred to also), meaning in theory it should perhaps be possible to recover from any bricks arising from flashing dodgy application firmwares.
So potentially there is the option of reverse engineering the firmware (easily obtained from here: http://wtf.li/ - mirror of the APKs of the app [each of which contain a version of the firmware], and also one version of the firmware (the .bin file) separately), and creating a custom/modified one, while still being able to recover (because bootloader & soft device should be untouched). However, I have neither the expertise nor the time to look into that.
Without an Android phone with which to run either of the apps right now, I can't poke about too much (I only received my Tommy today), but once I get my phone back I'll maybe try and see if I can find anything else interesting. I'd like to see if I can figure out any way to get access to the watch faces, and see if they can be reverse engineered in any way, for example.
EDIT: Here is the output of strings run on the firmware binary from the latest version of the app on http://wtf.li : http://pastebin.com/X7TQXTb3 - nothing particularly interesting, a few filenames of the source files and a few other strings seen in the watch interface and stuff.
EDIT: A couple of URLs accessed by the app (seemingly related to updating):
http://au.umeng.com/api/check_app_update
http://www.yfsmart.com/weloopInterface/getFirmware.do
I can't see anything on these sites, my guess would be they need query strings parameters or something (not really sure what, some way of identifying that the app is accessing the site) to actually do anything.
EDIT: Hmm... http://www.yfsmart.com/weloopInterface/firmware_Upload.jsp - this site seems to allow you to upload a firmware. I wonder if it allows anyone to upload a firmware, which would then be downloaded by everyone when they check for updates? Certainly seems rather insecure...There's a bunch of other pages at http://www.yfsmart.com/weloopInterface/ haven't looked through them all yet.
EDIT: From what I can glean from this page ("SoftDevices" section under the "Development Tools and Software" tab), it seems like the "soft device" firmware is essentially a bit like a library, it's a precompiled binary supplied by Nordic (company that makes chip inside Tommy) which provides all the networking functions etc. which the "application" firmware uses. So:
Code:
application = front end UI (basically, the part WeLoop made)
soft device = "library" via which application can access hardware etc.
bootloader = initial part of firmware that loads SD + app firmwares
So the only really interesting part is probably the application firmware, the part that is in the WeLoop app. That's the code that actually "matters", the rest is just low level stuff. For actually changing the interface or whatever, modifying the app firmware would be all that's needed (for example, to increase the font size or the back light duration etc.).
SifJar said:
If it's allowing you to select an update file, surely it is showing you the file system of the phone? Otherwise, you'd have no way to put a firmware update file there to select. My understanding would be this allows you to install a firmware update file stored on your phone, although I can't test this for sure as my Android phone is currently being repaired. There's some discussion about this here and that thread also contains a very small amount of analysis on the firmware file (VERY small amount, basically just analysing the name of the binary file), and another app that is apparently in some way related (link).
For what I can glean from the description of that app (seemingly made by the manufacturer of the SoC [System on a Chip] used in the WeLoop Tommy), it would appear that devices using the SoC (including the Tommy) have three firmwares: "bootloader", "soft device" and "application". The one embedded within the WeLoop app apk has the name "ble_app_ancs.bin"; ble stands for bluetooth low energy and ancs apparently stands for apple notification centre services. That leaves "app" - my guess would be this is the "application firmware". I'm not entirely sure the roles of the "bootloader" and "soft device" firmwares, but my guess is the one or other allows the device to get into "DFU mode" (or "OTA mode" as it seems to be referred to also), meaning in theory it should perhaps be possible to recover from any bricks arising from flashing dodgy application firmwares.
So potentially there is the option of reverse engineering the firmware (easily obtained from here: http://wtf.li/ - mirror of the APKs of the app [each of which contain a version of the firmware], and also one version of the firmware (the .bin file) separately), and creating a custom/modified one, while still being able to recover (because bootloader & soft device should be untouched). However, I have neither the expertise nor the time to look into that.
Without an Android phone with which to run either of the apps right now, I can't poke about too much (I only received my Tommy today), but once I get my phone back I'll maybe try and see if I can find anything else interesting. I'd like to see if I can figure out any way to get access to the watch faces, and see if they can be reverse engineered in any way, for example.
EDIT: Here is the output of strings run on the firmware binary from the latest version of the app on http://wtf.li : http://pastebin.com/X7TQXTb3 - nothing particularly interesting, a few filenames of the source files and a few other strings seen in the watch interface and stuff.
EDIT: A couple of URLs accessed by the app (seemingly related to updating):
http://au.umeng.com/api/check_app_update
http://www.yfsmart.com/weloopInterface/getFirmware.do
I can't see anything on these sites, my guess would be they need query strings parameters or something (not really sure what, some way of identifying that the app is accessing the site) to actually do anything.
EDIT: Hmm... http://www.yfsmart.com/weloopInterface/firmware_Upload.jsp - this site seems to allow you to upload a firmware. I wonder if it allows anyone to upload a firmware, which would then be downloaded by everyone when they check for updates? Certainly seems rather insecure...There's a bunch of other pages at http://www.yfsmart.com/weloopInterface/ haven't looked through them all yet.
EDIT: From what I can glean from this page ("SoftDevices" section under the "Development Tools and Software" tab), it seems like the "soft device" firmware is essentially a bit like a library, it's a precompiled binary supplied by Nordic (company that makes chip inside Tommy) which provides all the networking functions etc. which the "application" firmware uses. So:
Code:
application = front end UI (basically, the part WeLoop made)
soft device = "library" via which application can access hardware etc.
bootloader = initial part of firmware that loads SD + app firmwares
So the only really interesting part is probably the application firmware, the part that is in the WeLoop app. That's the code that actually "matters", the rest is just low level stuff. For actually changing the interface or whatever, modifying the app firmware would be all that's needed (for example, to increase the font size or the back light duration etc.).
Click to expand...
Click to collapse
Thank you for the insights and findings its all very promising. :good:
On a sidenote:
I talked to one of my colleagues who is an engineer (i'm not a dev but a Designer), it seems like we in the office are playing around with the exact same SOC from NordicSemiconducter. we tried one of the apps from the google play store and it connects to the weloop(see attached pic). The app was called "nRF Master Control Panel", tried the other apps from NordicSC but no luck.
Hopefully there will be some sort of SDK with the v3.0 release on the 30th...
I got my Android phone back today, and haven't tinkered too much with Tommy just yet, but I can confirm that the file system you are browsing when you tap the percentage 5 times during an update is just the phone file system. It browses from root (i.e. /), rather than /sdcard or whatever, which is the standard, user accessible partition, hence there are some folders etc. you may not recognise, but amongst them will be "sdcard" which will take you to your regular storage (note: this is the case on phones without a micro SD card as well), where you could easily place an update file.
SifJar said:
I got my Android phone back today, and haven't tinkered too much with Tommy just yet, but I can confirm that the file system you are browsing when you tap the percentage 5 times during an update is just the phone file system. It browses from root (i.e. /), rather than /sdcard or whatever, which is the standard, user accessible partition, hence there are some folders etc. you may not recognise, but amongst them will be "sdcard" which will take you to your regular storage (note: this is the case on phones without a micro SD card as well), where you could easily place an update file.
Click to expand...
Click to collapse
Thanks for the confirmation. :good:
taleboblen said:
Troubleshooting
Force OTA update:
Connect your watch to the charger.
Press all 3 buttons on the side simultaneously
Release the 2 side buttons, and keep the middle button pressed until you get the upgrade connecting display. (this might take some seconds)
Delete connection from phone
Connect and pair from app and upgrade
If you are on an Android device try an ios device, and vice versa
Click to expand...
Click to collapse
I tried to use the OTA update to go from 3.17 to 3.18 (on Android) but Tommy stuck on screen "WeLoop ... Udating 0%", my smartphone (HTC M8) with its APP (latest version) dont find the Tommy and it remains bricked, how do I restart it? I tried all combinations, but remains on the screen, help me!
Hi,
Dear All,
Ok, the problem is very famous i.e. i factory reset my device and when powered one like a fresh piece, i cannot add google account on my G900F (can't establish a reliable connection to the server).
i have searched a lot over the internet. Read about the HOSTS files description as well. All i found was the modification of the "etc/hosts" with the clients.google.... following "#" so that 127.0.0.1 localhost is only the operational entity.
My device is un-rooted and just for the confirmation of the above mentioned, i opened the hosts file via HTML Viewer (just readonly) and found that the etc/hosts file on my S5 has 127.0.0.1 localhost only and no any other information, which i think should be available for your device to work normal and google accounts can be added. See attached screenshot.
Need your kind help in resolving my issue please.
Try clearing caches from recovery
Still same issue...
Might be worth factory resetting again
How did you access the HOSTS files without being rooted?
did the factory reset 3 times but nothing, issue stands unresolved.
i opened the HOSTS file through RARLAB. Actually it allows you to view the root folder and all of its contents even if your phone is un-rooted.
Could try removing the device from Google Play
https://support.google.com/googleplay/answer/2407656?hl=en-GB
Create a new Google account as a test to see if the issue is the phone or the account
If that doesn't help, Id flash a stock ROM through ODIN, this will NOT trip KNOX if you are still 0x0
Are you sure all your data connections are working properly, WiFi/3/4G ?
*Detection* said:
Could try removing the device from Google Play
https://support.google.com/googleplay/answer/2407656?hl=en-GB
Create a new Google account as a test to see if the issue is the phone or the account
If that doesn't help, Id flash a stock ROM through ODIN, this will NOT trip KNOX if you are still 0x0
Are you sure all your data connections are working properly, WiFi/3/4G ?
Click to expand...
Click to collapse
ok here are some interesting occurrences:
Worth mentioning that i was operating over Wi-Fi.
1) - i flashed a stock Kitkat ANG2 ROM via odin and the problem still persists.
2) - Then i flashed stock Lollipop BOB7 and still the same.
3) - Then i created a new account via the first sign in page on the phone (after flashing the new ROM), and i was able make a new account(through my phone) but still it was unable to login on the phone.
4) - Then i installed a Proxy/VPN betternet and then i was able add an account successfully and also Play store is working fine.
5) - Means there is some issue with my wi-fi adapter routing (may be inside the phone or the carrier) etc.
6) - Then i switched off the wi-fi and enabled LTE (of my SIM card provider) and connected my phone through it, say what! its working fine.
7) - again i tried over the wi-fi and the issue started to happen again
Well, one important thing, i am using wi-fi which is also a LTE carrier (having the google issues) and the second LTE (which worked fine) is by the SIM card operator.
So , is there any problem with my wi-fi (inside the phone) or may be with the operator from which i am getting my services??
its quite confusing at the moment. well i am going to try the whole thing over the Wi-Fi of another operator and will feedback the results.
Mean while any suggestions ??
Reboot the router you are connected to WiFi from?
Doesn't sound like the phones fault, unless you have a proxy enabled in WiFI settings or something, sounds like the issue is with your ISP/Router
So I bought a cracked screen LG stylo 3 TP450 before Christmas from Donation store. Turn out phone still work fine and i've been searching a way to bypass FRP since then.
So far i could get into setting and force stop Apps but i can;t find a way to soft reset yet.
Someone help me plz?
If you can get into Settings, then you should be able to get into a browser or a search box. In either, type Chrome and then open the Chrome browser. Once it's opened, go to the website: vnrom dot net/bypass
You'll see several files. The ones you'll need are:
Android_6_GAM.apk - Google Account Mananger, this lets you sign into your Google account
FRP_Bypass.apk - This bypasses the FRP
ES_File_Explorer.apk - If your device does not have a file manager
Install Android_6_GAM, open it and follow the prompts.
Install FRP_Bypass, reboot device and then set it up.
Once your device is set up, go into Android and reset your device to factory defaults from Settings. Set it up one last time.
Now you're done and the device is FRP locked to your google account instead.
youtu.be UHQ9Ftwt6ek for a video tutorial
Unknown sources won't turn on
nivex09 said:
If you can get into Settings, then you should be able to get into a browser or a search box. In either, type Chrome and then open the Chrome browser. Once it's opened, go to the website: vnrom dot net/bypass
You'll see several files. The ones you'll need are:
Android_6_GAM.apk - Google Account Mananger, this lets you sign into your Google account
FRP_Bypass.apk - This bypasses the FRP
ES_File_Explorer.apk - If your device does not have a file manager
Install Android_6_GAM, open it and follow the prompts.
Install FRP_Bypass, reboot device and then set it up.
Once your device is set up, go into Android and reset your device to factory defaults from Settings. Set it up one last time.
Now you're done and the device is FRP locked to your google account instead.
youtu.be UHQ9Ftwt6ek for a video tutorial
Click to expand...
Click to collapse
Ok can do but it's got the part about downloading from unknown sources to where can't switch it how do I change this.
lg stylo 3 plus unknown how to get unknown sources ungreyed
Ok can do but it's got the part about downloading from unknown sources to where can't switch it how do I change this. cuz i cant installanything i cant get developer opitions i cant do any of the steps with out it so how do you get it ungreyed in the first place . ive tried tools youtube and everything doesnt show me anything on how to activate unknown source i even saw something about external sources but i dont know someone anyone if you can tell me what i am missing that would really help m out
i am in the same delema bro. try this... yesterday i went on youtube and i couldent get unknown sources ungrey ether. this dude said that while you do these steps timing matters. if you dont get it right away try again faster to try n trip up unkown sources. i hope this helps us both.
Hello XDA-Community,
I've got a Yoga Tab 3 Pro YT3-X90L from a customer.
He was telling me, that he wanted to unlock his device with the pattern, mismatched for several times and now its locked and requires the owners google account. Or something like that. He never had the owners google account. He told me that his seller has activated his device for him. And he has no clue who it was.
Now here is my part.
I've researched and obviously it's a FRP. The owners google account information are stored in the FRP-Partition. And this partition won't get deleted with a simple factory resett.
What i've tried so far:
1.) https://www.youtube.com/watch?v=nCzrnnh2K1w I was able to follow this tutorial to minute 9:08. But the option "Email and password" is not there anymore. I guess they patched it with 6.0.1.
2.) I tried to flash a stock rom or twrp with LenovoDownloader(QcomDLoader). The stock rom file is: Lenovo_Yoga_Tablet_3_YT3-X90L_ENG_S200028_1609230146. even its a german device this file was the only one i could find. But the LenovoDownloader won't recognize my device. The windows stays white, no entries. I guess i installed the correct driver for this device and Windows recognizes them as removable device if i plug it in via usb.
3.) I've tried to use adb and fastboot boot oem unlock. But this commands aren't working in locked state.
4.) With a trick i could open the Settings and was full of hope to active the developer options to set usb debbuging to active. But this developer options aren't available either with this "user".
5.) There is an apk for showing the "Email and password" interface. I could install it, but it force closes right after starting it.
6.) I've tried several tools to bypass this FRP: WinDroid Toolkit, D-G Unlocker, Realterm, but NOTHING.
What could i do further? I'm out of ideas right now.
I've read about a factory_update.img but i cant find anything, except the stock rom file, for this device.
Or downgrading the device, so i could use the "Email and password" but. But i can't even flash the stock rom.
Specs for the device:
Lenovo Yoga Tab 3 Pro YT3-X90L
Lenovo/YT3_l0_row_lte
6.0.1/MMB29M/LenovoYT3-X90L_S200307_170614
i appreciate any help i can get
greets
redplate
I've wrote it down. Hope this helps.
Situation:
"Confirm account: The device has been reset. To continue, sign in with a Google Account that was previously synced on this device. "
Explanation:
The device has been blocked by repeated input of the wrong password, pattern, etc. and can only be unlocked with the Google account of the owner.
A factory reset or hard reset does not help here, as the account information is saved in its own FRP partition and will not be deleted when the factory state is restored.
Solution:
1. Connect device to a Wi-Fi and Internet access.
2. Before confirming "Next", select another hotspot here
3. Go to "Advanced Settings" and change the proxy settings of any hotspot to Manual.
4. In the text input field of the proxy settings you enter now any word: e.g. Test
5. Now mark this word and select "Assist" in the context menu.
6. Selecting this "Assist" option opens the Google search application.
7. You can now not only browse the Internet through this search, but also search for and open installed programs.
8. We are looking for Chrome, open the internet browser, go to www.google.com and search for DPC test.
Link: https://www.apkmirror.com/apk/sampl...-release/test-dpc-4-0-6-android-apk-download/
9. After downloading this application, go back to the Google search application.
10. Here we enter "Download" to search for the download application.
11. In Downloads we can now find and install the downloaded app.
12. To allow the installation of this .apk, you must allow the installation of "unknown sources" in the settings.
13. Either you go here on the installation itself on "Settings", or you search for "Settings" on the Google search app.
14. After completing the installation of the DPC-Test program, start it with "Open".
15. The app itself is will register as a device owner and now allows us to set up a new Google Account as owner.
16. If this is set up, it will also be included in the FRP partition.
17. In the event of a new factory reset, the device is reset, the DPC-Test program is removed and the device can be freshly set up in the factory settings.
after the takeover of the owner, the reason for blocking the device was not present anymore and the old owner was overwritten. This will be overwritten in the FRP partition aswell with the new account and the old one no longer queried.
You, mister, are my savior! Thank you very much.
Solve works for Lenovo Yoga 3 tablet
Just a big giant thank you! My dad passed away leaving me a Lenovo Yoga 3 tablet, unable to gain access due to information stored in the FRP partition. :highfive:
Hi
I followed your instructions for first 5 points
redplate said:
1. Connect device to a Wi-Fi and Internet access.
2. Before confirming "Next", select another hotspot here
3. Go to "Advanced Settings" and change the proxy settings of any hotspot to Manual.
4. In the text input field of the proxy settings you enter now any word: e.g. Test
5. Now mark this word and select "Assist" in the context menu.
6. Selecting this "Assist" option opens the Google search application.
Click to expand...
Click to collapse
I marked the word and only that is offered on the top right side is : SELLECT ALL - CUT - COPY.
There is no ASSIST option . I don't know, maybe this tablet on my desk has a newer android version with that option removed...
Is there any other solution? Probably will be helpfull for me as well for someone who will have tjis problem in the future
Thx in advance
marOOn1971 said:
Hi
I followed your instructions for first 5 points
I marked the word and only that is offered on the top right side is : SELLECT ALL - CUT - COPY.
There is no ASSIST option . I don't know, maybe this tablet on my desk has a newer android version with that option removed...
Is there any other solution? Probably will be helpfull for me as well for someone who will have tjis problem in the future
Thx in advance
Click to expand...
Click to collapse
Hi. Actually I'm not into this anymore. Could be possible they removed it since it might was reported.
If I have any idea I'll let you know it
Hello XDA community,
Im a noobie when it comes to rooting, thats why i need help...
I deleted some files that i want to recover on my Samsung S7 Edge 2-3 years ago, this device has Android 7.0. (Never updated)
There is a lot of apps such as Disk Digger that offer you to recover every single file but the device must be rooted to access 100% on the internal memory.
Right now my Samsung S7 Edge is not rooted but i need to root to recover this files, so my question is, there is anyway of rooting without factory reset, or there is anyway of doing a fully backup of the internal memory of my device without touching the partitions so then i can try recovering my files later with this apps?
I hope someone can help me...
Regards
It's pretty disappointing that nobody ever responded to this considering how big is a community it is and how popular the S7 Edge was. I know this is pretty old and hopefully you were able to resolve this before this message but I'm going to respond to this just so you don't feel like your question wasn't acknowledged at all. I have an S7 Edge through Verizon which uses the Snapdragon processor. And I will find a link to post for you that although the method says it's discontinued I rooted my phone through this method and it works fine. The only reason that you would have to wipe your phone is if you're changing firmware as far as I know. I've rooted my phones and did not have to wipe them. I kept all the data and everything.
Before I lift this you are also asking about an application that you could use to back up your phone and that would be Samsung smart switch. It has a companion app for the desktop and it sinks to the phone and it'll make a backup of your data.
Now on to the root method all props and praise goes to the people that worked to give this to the people I'm not good at doing all this **** and I'm not meaning to step on any toes I'm just trying to help you since nobody did for two ****ing years.
To root
1. Download PrinceComsys Odin
Odin.Prince.Comsy.zip
drive.google.com
2. Download the engboot.
Engboot Download
Nougat_S7_Edge_EngBoot.tar.md5
drive.google.com
3 make sure you have adb and fastboot installed on your computer (goggle them)
4. Root file
Download the file below.
Nougat_S7_Root_2_82_All_Carriers_V2.zip | by jrkruse for Galaxy S7 Edge
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
BELOW IS THE ROOT AND MOD FOR THE PHONE!!!!!
Follow this method to root:
1. Shut off the phone and boot into download mode (volume down, home, and power). Use Odin And Flash Nougat_S7_Edge_EngBoot.tar.md5 In AP Slot
2. When the phone reboots, unlock developer options by going into the phone settings scroll down to 'about phone' find the build number and tap on it repeatedly after several times it will unlock Developer Options then back out once and in your settings you should have a new option on the very bottom called developer options go into that and enable USB debugging and Disable Verify Apps Over USB.
Plug the phone into the computer and make sure you have adb and fastboot installed to this location
C:\Users\YOUR PROFILE\AppData\Local\Android\Sdk\platform-tools
go to that folder and inside it hold shift and right click then click on 'open command window here'
then in command prompt type
adb devices
then hit enter.
The computer should automaticly detect and run adb
3. Unzip the Nougat_S7_Root_2_82_All_Carriers_V2.zip and hold shift and right click then click on 'open command window here'
In the command window type root.bat then press enter from your PC.
4. This will install root when done phone will reboot
5. The process wipes dalvik cache so it will take a few minutes to reboot
6. If having problems getting Grant SuperSU dialog to come up you can delete the SuperSU app and root will be granted instantly to all root request
Give phone a few min to settle open developer options set animation scales .05 and others to .05
Give phone a few min to settle open developer options set animation scales .05 and others to .05
ODIN FAILED TO WRITE ERROR
Did you get this Failed To Write Message in Odin?
----------------------------
Odin Error Message:
<ID:0/003> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
SOLUTIONS
Did you:
? Open Odin as Administrator?
? Try the Prince Comsy version?
? Enable Developer Settings?
-Open Settings > About Phone > Tap Build Number 7 Times
? Enable OEM Unlock?
-Go Back to Settings > Tap Developer Options > Tap OEM Unlock
? Enable USB Debugging?
-Tap Developer Options > Tap USB Debugging
NOTHING WORKS
Did you try every single thing but nothing works?
Well, did you right click "Odin" each time you go to open it and then click "open as administrator"?
Sometimes you have to try several different versions of Odin.
But I have found that Odin3 v3.12.7 was the one that would work when the others had not.
I always would forget to also open Odin as Administrator.
It's a pain in the neck to have to remember to open as admin every time.
But you usually have to do it.
Did you check that ADB had started? Maybe that might be the reason it won't work?
But I doubt it! But you just never know and I am just trying to help you get it flashed.
It's a very quick flash and you can see that the PDA load was very quick as well.
But as far as the errors, you just have to keep trying...
Which I mean, you sometimes have to open, close, reopen Odin when it doesn't work.
Sometimes that helps, sometimes it doesn't.
It's all about the right Odin version at the time
making sure the cord is good
Opening Odin as Admin
And keep trying again after restarting your phone by holding the download mode button sequence again.
============
Congratulations! You are ROOTED but you're not done
Follow these instructions next
On your phone, open the SuperSU app (installed during the root process) and tap on Settings. Half-way down under Security, tap on "Enable su during boot".
This option will ensure that startup scripts that are installed during this process get to do their job correctly.
Download the fix or fix+debloat script flashable ZIP package appropriate for your model of phone and copy this file to your device:
S7_VOLTE_ICON_FIX_ALL_VARIANTS or S7_or_S7Edge_Fixes_V15.zip (MD5 hash F15CD9BDC35382A8F48FFBEDBB1BCDF0) (any Samsung Galaxy S7 or S7 Edge)
turn off auto update of time and date in your phone settings, then set your year to 2013,
Launch FlashFire app on the phone and click the (+) button in the lower right to add a step. Select a 'Flash ZIP or OTA' flash step.
Locate the flashable ZIP package and select it. For options, check on 'Mount /system read/write' and leave the rest of the options unchecked.
Tweaks to Root
Debloat and fix several issues with the phone (CPU lag issues, poor battery performance, phone becoming too hot, Wi-Fi not saving passwords, hotspot/tethering not working,
VoLTE icon appearing, searching for service issues, MMS not working, unauthorized security nag notification, etc.):
Full notes on what this flashable update does:
Adds a rotate button to the native gallery app
.
Adds a shortcut call button in the call log next to each logged call.
Adjusts several CPU tunables, which fixes phone lag and battery life issues.
Disables "No SIM" popup when no SIM card is present.
Disables roaming data by default.
Disables secure storage support, which fixes Wi-Fi passwords not saving issue.
Disables Verizon provisioning for Wi-Fi tethering/hotspot (will still use your data plan, of course).
Enables ADB to run as root by default.
Enables CPU idling/sleeping, which fixes phone heat issues.
Enables mock GPS locations.
Enables native call recording feature in the dialer.
Enables native Wi-Fi calling feature in the dialer.
Enables RIL power saving features.
Enables scheduled messages in the native messaging app.
Enables the camera during calls.
Enables unlimited contact merging.
Enables using the new 3GPP2 Profile ID (Verizon exclusive).
Fixes various 'searching for service' and other cellular network connectivity issues (SMS/MMS not working, calls not working, etc.)
Knox apps, drivers, and data are removed (fix+debloat version).
Prefers LTE network.
Raises the contact name length limit to 1,280 characters.
Raises the maximum SMS recipient limit from 10 to 90.
Remove nagging 'unauthorized actions' security notification (fix+debloat version).
Removes VoLTE icon.
after you flash your stuff change the date back. and you're good.
I know this all seems like a lot and it seems very confusing but it's pretty easy if you just follow the directions this will not wipe your data. Please do research, read through the forms and just tried to get as much knowledge as you can before you go about doing this it's an easy process but it's better to go in with more knowledge, I hope this helps. If you have to reinstall the firmware make sure that you install CSC home so you don't lose your data