My problems began this morning because of my stupid merciful ass.
Until this morning i had a lg g3 which worked flawlesly but one friend of mine which posesd the magic phone sugested that we should make an exchange .
I saw that he was so happy about the g3 so i accepted .
He gave me the samsung s5 + which worked at the time .I tried the camera ,a litle game ,and everithing was ok.
After i got home i wanted to insert my sim and got the batery out .
After i put in the battery the phone doesnt work anymore .I dosnt start ,it doesnt charge ,i doesnt work at all. If i put a micro sd i can go into the boot recovery mode but thats all.
Boot recovery mode
check boot partitions
sbl1 partition doesn't exist
ddi:mmc_read failed
odin mode(high speed)
product name :sk-g901f
curent binary:samsung official
system status:custom
reactivation lockff
knox waranty void:0x0
qualcomm secureboot :enable(csb)
rp swaev : s1 , t1, a1 , a1 , p1
secure download :enable
udc start.
Hello everyone!
I need a little advice to fix my softbricked note 4
So here are the facts:
I boght a bricked N910F i tryed different roms from sammobile using odin and twre, more than 7 to be specific, and most of them did t work as it shoul. My imei was the same as on the case but i noticed SN was different in system and knox 0x1.... I got a version of android 6.0.1 to work but there were different little, big problems like not rememering wi fi passwords, fingerprint not working version :null in testing, and often restarts and bootloops after installing different aplications. i tryed many things even repartition with proper pit file, i still had back-up of my efs but considering the serial number was screwed up i gave up trying anything else. I tryed rooting with different methods but everything failed.
I boght another N910F with screen broken but working mainboard and knox 0x0
Swaped the mainboard, tryed samsung kies 1, entered serial and model and it gave me the fw i needed to flash. Tryed flashing with kies and at the middle of transfer it said failed and phone froze, didnt even power on for a while. Tryed again after a few howrs, same rezult with message emmc read fail, and at the bottom emmc write fail.
kies said i need PDAG2/CSCE2 / PHONEE3 CNX
Now, later in the evening i managed to power it on agan and i dont know what to try so i dont screw up with knox
Here are some pictures of my current status:
Current status: cant post picture...
ODIN MODE (HIGH SPEED)
PRODUCT NAME SM-N910F
CURRENT BINARY Samsung Official
System Status Official
REACTIVATION LOCK OFF
Knox 0x0
qualcomm secureboot enable csb
RP SWREV S1 T1 R1 A1 P1
secure download enable
UDC STAR
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
What should i try next?
Thanks
Later Edit:
looked up on youtube and found that smart switch can do the work, tryed it and seems it went all the way and installed proper rom without fail. LOL
Morning edit:
So everything worked perfect last night so i left it on fastcharger. In the morning i found it in download mode with dii emmc read fail, could not do normal boot.... After this i have to let it rest a bit without battery, then it boots up ok, works a few minutes then it shuts down and never wake up
faurionutz said:
eMMC from phone is damaged harware
Click to expand...
Click to collapse
I found the only way to keep it working is by preventing it to go into sleep mode. Play music on repeat muted keeps it working
Lucky i have fast chargers and 3 battery
i tried different keep alive apps but they eventually fail and phone dies
Hi , my name is ricardo , im going to be honest with you guys.
So , i rooted my phone , a samsung galaxy j5 , SM-J500FN , with superuser , then i had gamekiller.
But i decided that i wanted to unroot , so i did , i had usb depuration on , after i unrooted , the phone said that the security of the phone was at risk , i dont have antivirus , its from samsung , knox , i think... I dont know.
So , i decided to erase everything. I did , and after it , turning on the phone says : Set warranty bit - Recovery
and the screen goes black . Cant get into recovery , but i can get to download mode , but not reconizable in the pc or odin , or kies or smartswitch , tried 4 pcs , unistalled drivers , installed , tried on windows 10 , 8 and 7 , and also xp.
In download mode the phone says:
ODIN MODE
Product name : SM-J500FN
CURRENT BINARY - Custom
SYSTEM STATUS - Custom
FAP LOCK : OFF
KNOX WARRANTY VOID : 0X1 (4)
QUALCOMM SECUREBOOT: ENABLW (CSB)
RP SWREV : S1 , T1, H1, R1, A1, P1
SECURE DOWNLOAD : Enable
If you know how to fix this , please tell me ... :crying::crying::crying:
Hondaturboeg6 said:
Hi , my name is ricardo , im going to be honest with you guys.
So , i rooted my phone , a samsung galaxy j5 , SM-J500FN , with superuser , then i had gamekiller.
But i decided that i wanted to unroot , so i did , i had usb depuration on , after i unrooted , the phone said that the security of the phone was at risk , i dont have antivirus , its from samsung , knox , i think... I dont know.
So , i decided to erase everything. I did , and after it , turning on the phone says : Set warranty bit - Recovery
and the screen goes black . Cant get into recovery , but i can get to download mode , but not reconizable in the pc or odin , or kies or smartswitch , tried 4 pcs , unistalled drivers , installed , tried on windows 10 , 8 and 7 , and also xp.
In download mode the phone says:
ODIN MODE
Product name : SM-J500FN
CURRENT BINARY - Custom
SYSTEM STATUS - Custom
FAP LOCK : OFF
KNOX WARRANTY VOID : 0X1 (4)
QUALCOMM SECUREBOOT: ENABLW (CSB)
RP SWREV : S1 , T1, H1, R1, A1, P1
SECURE DOWNLOAD : Enable
If you know how to fix this , please tell me ... :crying::crying::crying:
Click to expand...
Click to collapse
Actually Odin must detect the phone in download mode if correct drivers are installed. You may try this. Try to install TWRP recovery in your device. And than install CM 12.1 in it. But the best option is to download latest firmware for your mobile from Sammobile & flash it via Odin. Try to reinstall the drivers in your PC and see. Hope it will help.
rjrulz007 said:
Actually Odin must detect the phone in download mode if correct drivers are installed. You may try this. Try to install TWRP recovery in your device. And than install CM 12.1 in it. But the best option is to download latest firmware for your mobile from Sammobile & flash it via Odin. Try to reinstall the drivers in your PC and see. Hope it will help.
Click to expand...
Click to collapse
Thank you for the help , but my dad did something to the cable , not original though , and odin managed to reconize it , but its weird because , i tried also in a new cable of galaxy s5 and it didnt work , but thanks , the phone is working but pc doesnt reconize it still , dont know why , but the phone is working ... Its really weird.
Hondaturboeg6 said:
Thank you for the help , but my dad did something to the cable , not original though , and odin managed to reconize it , but its weird because , i tried also in a new cable of galaxy s5 and it didnt work , but thanks , the phone is working but pc doesnt reconize it still , dont know why , but the phone is working ... Its really weird.
Click to expand...
Click to collapse
WELL FROM experience for galaxy s duos 2 when the phone receive some kind of electric choc or smth cpu config may reset
Hi,
i'm having some trouble with my note 4. so i recived the note from a friend and she told me what was the problem. the problem is that she would turn it off then when she trys to attempt to turn it back on it will show the samsmung boot screen then all black with the blue and white(maby baby blue, i cant tell exacly)and sometimes boots a 2nd or 3rd time. leave it like that and the phone would start getting hot. so i used odin and installed a freash BL, CP, and CSC. then i left the phone withpout the battery for about 10 minute's then i put the battery back on and turned it on. it worked! but after a while i accidentaly turned it off. the same problem was back(i dont know if this is important but when ever u tryed to update the software it would alway's fail). so i thought why dont i just install freash clean OS and i whont have to face this problem again. i installed android 5.0.1 and it did not work, this time the blue adn white notification light was not on. so i installed it again but only the BL. the light was back. please help me on what to do or give me a link to a legitament clean OS. i've tryed every trick! pull out the battery then press and hold the power button to drain out the ramining power and leave the phone for about 10 min. try to go in recovery mode(when i try to do this, it goes all black also), install a clean freash OS, ECT. im running out of options! what should i do! it cant be the hardware because everything was working fine. it cant be the screen because i've personally seen the screen work perfectly fine, plus the samung boot logo( the "samsung galaxy note 4 powered by android" boot). i dont know what to do!
Reboot into download mode and see what firmware is on it. then download the latest MM 6.0.1 firmware and flash it with odin. Depending on the model, the BL may be locked to prevent flashing older firmware. If that doesn't work you may have to flash a pit file with the firmware but that is last resort. If you can take a picture of what download mode says and post it here it would be way easy to help you fix it bro
noob4598 said:
Reboot into download mode and see what firmware is on it. then download the latest MM 6.0.1 firmware and flash it with odin. Depending on the model, the BL may be locked to prevent flashing older firmware. If that doesn't work you may have to flash a pit file with the firmware but that is last resort. If you can take a picture of what download mode says and post it here it would be way easy to help you fix it bro
Click to expand...
Click to collapse
imsorry but i am unable to post a link nor a picture due me being a new user.
but it does say this:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910A
CURRENT BINARY: SAMSUNG OFFICAIL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDCSTART
hi!
i just agree to the update from my phone, he download the update and start install it. i had 60% of battery.
in the end of the update, the phone is stock with Samsung logo and make a 2 restart until he show my black screen and blue light.
i try to flash new ROM from samoblie. with i chose g935fd. and he back to do a 2 restart and blue light.
the phone is a gift i do not have warranty. the phone is international from Emirates
i need some help plz! i try fix him a 4 days.
in odin mode:
product name: SM-g935f
current binary: samsumg official
system status: custom
frp lock: on
secure download : enabled
warranty void : 0 (0x0000)
rp swrev : B:2 k:0 s:0
Download Samsung smart switch and install through that
in the smart switch it write "model are not supported "
Hello guys, I'm also facing the same issue. My phone is the S7 Edge duos black and never been flashed but has gone through an update from Marshmallow to Nougat. The problem is, one day it suddenly restarts itself and gets the bootloop issue everyone is facing. I can't even go to recovery mode to wipe cache partition as instructed everywhere.
I already tried to flash the phone using the firmware available on Sammobile.com but it still experiencing the bootloop right after it has been completely flashed.
Please help,
Hex