Disabling proximity sensor - Nexus 6P Q&A, Help & Troubleshooting

I recently bought a 6P (yey!), so far I've enjoyed it a lot! Came from a N4 that also served quite good.
Anyways, I bought a screen protector without the cutout for the proximity sensor. So as you would guess the screen goes black after I answer a call and it is really annoying.
Is there a way to disable the "darken the screen when a call is active" or another solution without replacing the screen protector?
So far I only enabled the Hang Up power button press feature, and I don't like this solution.
Thanks in advance

The only workaround (on stock) is to enable power button to end calls in accessibility options. My toast skin and TGSP was doing this to me until I got fed up and made the cutout wider - haven't had the issue since. If you download a proximity sensor tool or test suite from Play store you'll see that the phone can't detect distances - which is why it assumes it's pressed to your face.

Related

Proximity sensor Strange behaviour - not working if u get very close.

I dont know if this is an issue with other handsets.
I installed proximity screen off application . The purpose was to have the phone turn the screen off when i close my flip case.
However i found something strange.
When the flip case is very close to the screen the proximity sensor does not seem to detect that there is something covering it.
Is this an issue with every one ?
Any solution
Please see the videos
As you can see from the videos when i bring the shield very close the proximity sensor does not seem to detect the sheild.
Edit : However if u use ur finger this is not seen
I've noticed the same behavior, it's quite annoying because it kills one of NoLed's best features (screen off using prox. sensor).
[deleted]
Still really annoying that the original flip cover won't work with the proximity sensor. A workaround might be a third party flip case. A diy modification of to the original one won't work since if I close it AND hold whatever object that alone is enough for a positive result over the flip cover, the sensor will still not register positive [because a minimal distance between an object and the glass surface is required, see below].
mine works even with a finger...
I've done it a few times accidently when i was trying to access the notification bar while on the phone
ph00ny said:
mine works even with a finger...
I've done it a few times accidently when i was trying to access the notification bar while on the phone
Click to expand...
Click to collapse
Thats the thing i was saying.
With finger i works great even if u touching the screen
Dial *#0*# and press sensor. If it vibrates, the proximity sensor is registering an object.
Maybe it comes in handy with testing.
It's working for me, thanks for the tip about the app!
edit:
Okay, I tested and found that indeed when you set the app to:
"Cover an hold to lock the screen" to say 5 seconds.
Close the flipcover.
It does not register.
However. If I set:
"Disable Accidental Lock" to .25 seconds.
Close the flipcover.
It works quite well.
Coming back to the sensor. It indeed does not register the flipcover when it's closed and touching the screen.
Weird thing is it does not register your hand anymore either.
Recreating issue:
Remove flipcover and lay it completely flat over the sensor.
Dial *#0*#.
Press "Sensor".
No registration.
Now hover your hand over where the proximity sensor is, and... How about that, no registration.
This indeed messes up NoLed's battery saving feature.
This can also be a problem when:
You set screen timeout to 10 min.
In the app's settings set "Disable in landscape" to on.
Then use an app in landscape mode.
Close flipcover while in landscape mode.
Then rotate to portrait. At this point it should start registering again and turn off screen..
The sensor does not register and screen stays on.
Drains battery.
It is a really cool idea, but it does not function properly.
It's too flaky, also when just handling your phone. I find myself accidentally turning off the screen.
Maybe if you use a case or some other cover with a different or thicker material it would work better.
I ordered a Zenuscase, I'll give it a try with that one.
Don't know how long it'll take to arrive though
reflective color
heey i found the problem , the sensor is working fine ... but when so close with any black object the light is not reflected back to the proximity sensor.(black color absorbs light).
Repeat your video with any white object and you will notice the difference..
Now i am using Autostart and it works great with samsung original flip cover (white flipcover).
you can use any white sticker on the black one.
ahmedtaha7 said:
heey i found the problem , the sensor is working fine ... but when so close with any black object the light is not reflected back to the proximity sensor.(black color absorbs light).
Repeat your video with any white object and you will notice the difference..
Now i am using Autostart and it works great with samsung original flip cover (white flipcover).
you can use any white sticker on the black one.
Click to expand...
Click to collapse
ya correct, just few day back i have asked this issue to developer
http://forum.xda-developers.com/showpost.php?p=22170417&postcount=5
But it will work perfact if you use proximity + light both sensor enabled.
Color has no influence, distance between an object and the proximity sensor is what matters. I've just tested this using pieces of paper, cloth, metal and wood in white and black colors. The sensor seems unable to correctly register anything that is less than approximately 1 mm away from the glass (it may report 0 cm or jump to 5 cm). Also it seems it only reports changes of a certain minimal distance between two readings, even if the reported value remains the same as the old one. Anything below the threshold of the 5 cm reading will always result in a reported value of 0 cm, but if the effective distance between reading A and reading B was below a certain threshold, the sensor will not report a new reading of 0 cm (thus an object hovering stable over the sensor will not produce a 2nd post). I'm not sure if the sensor has a state that can be read at any time. From my tests using AutomateIt Pro, it seems only new posts can be used by apps. And if the delta between two readings is to small to make the sensor post a "new" result, then this can be problematic under certain circumstances (like trying to turn the screen off after the flip cover got closed (prox. sensor = 0 for 0 sec) and stays closed (light sensor = 10 for 5 sec) while preventing the screen from going off after an accidental wipe over the prox. sensor e.g. with the hand).
@Dr. Ketan: I've tested Power Switch (again) and I'm quite certain that for the Note + Flip Cover it only works through the light sensor (which is unsatisfying since it then won't work correctly in the dark). Covering the proximity sensor only doesn't make the app reliably react.
Power switch works ok for me with the Samsung flip cover. I have the confirmation set to minimum Abe theactivation delay set to 0 seconds.
It doesn't always work from the lock screen but works fine from the home screen or apps
Sent from my GT-N7000 using xda premium
so is it a hardware issue of software?
might it be fixes in ICS? it's fu***ng annoying! just bought the flip cover(black) yesterday and also bought smart cover app, my note's screen keeps on turn off (when flip closed) then it turns back on (flip still closed)!
Any solution for gingerbread? like proximity calibrator perhaps? (while waiting for final version of ics to come out)
Power switch will work if you use proximity + light sensor both.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Power switch will work if you use proximity + light sensor both.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
It's so sensitive that the moment my finger move over the sensor, the shutdown menu pops up.
Any app that works with the flip cover?

[Q] What mod allows you to disable the in-call proximity sensor?

Hi everyone,
Long story short, I got a used Nexus 4 off someone, everything works perfectly except the proximity sensor. During a call the screen blacks out and doesn't come back unless I hard reset the phone to hang up. I figured out it was a problem with the proximity sensor. Upon reading these forums and many other articles on Google about taking off the screen protector (which I don't have) and swapping the rubber "sensor" holder holes, I decided to open the phone up and take a look.
It appears that my phone is missing the rubber piece to hold the proximity and light sensors in place, making the sensor unusable and causing many issues with making calls. I've tried playing around with it using other peoples' suggestions and nothing has worked. I've decided to just find a way to disable the proximity sensor instead during a call, as I'll be quite satisfied with just a simple software fix.
Right now I am using Proximity Screen OFF to keep the screen on, but it drains my battery pretty hard. I was thinking to just flash my phone with a mod that allows me to turn the proximity sensor off during a call.
Any suggestions as to which mod contains this feature?
Thank you.

Ambient display not working/phone screen stays blank in phone call

So just got my 6p yesterday but it seems as though ambient display although turned on is not working ND when I answer a phone call my screen stays black during the call and won't wake up
UPDATE: so apparently it's because the tempered glass screen protector is covering the proximity sensor. I still have to actually test that theory out once I get a new protector but from doing some digging that most def it. Just a heads up I used the one by super shieldz so don't buy that one until they make a cut out for the sensor
Thank you! I never would've thought about it... I was having the same issue and I bought the same supershieldz protector. Just ripped it off, worked like a charm.
IMO it's a minor inconvenience, all you have to do is press the power button and I think I'd rather have it covered than have an odd-shaped cutout. What else is the proximity sensor used for?
Have you enabled your notification light and the ambient display?
Read that enabling both seems to glitch the ambient display.
Nexus 6P screen stays blank/dark because of proximity sensor blockage
The issue is the blocking of the proximity sensor. I purchased 3 Supershieldz Tempered Glass Screen Protector for Huawei (Google) Nexus 6P from Amazon for 3 Nexus 6P's. All 3 phones have issues of screen going dark and staying blank. Nothing wakes them up... i.e. pressing power button, volume up button, finger print on back. The problem is exasperated during phone calls. You simply cannot get the screen to turn back on once in a call! To see reviews and comments go to Amazon and search for "Supershieldz for Nexus 6P."

Screen stays ON during call? [Android Wear related?]

Any thoughts on how to troubleshoot this? I have a Moto X Pure 2015, no hacks/mods/etc, just straight up as it came, but the display does not shut off during a phone call. It is as if the proximity sensor is not working, but I downloaded a test app from the Play Store and it shows that the brightness AND proximity sensor are working fine. I saw some mention of an option in the phone app to enable/disable the proximity sensor but it is not there on this phone.
One additional thought... I saw some things related to bluetooth, and I do have a Zenwatch2... I shut it off, and the screen goes off now.
How messed up is THAT? Any way to fix it?
On mine it was my screen protector combined with my case. The case caused the screen protector to lift slightly at the edge and screen stayed on so I took case off... Bad call, dropped phone, cracked screen. I replaced screen and now use my case without the screen protector.

Always on 2nd screen in the dark issue ??

I bought a used V20 with a defective screen. I change it, everything work for fine, but i notice a strange behaviour with the second screen.
The second screen is always on and i can unlock it by only touching the finger print sensor. BUT at night (or in the dark), the second screen turn off and i need to press 2 times on the power button to wake the phone.
The Knock On feature doesn't work too in the dark.
The light sensor seems to work correctly.
I would love to post a video but i can't......
This is an issue or it is normal ??
Thanks for your help !
Sounds like Doze.
I don't find anything related to Doze or "standby" about this screen.
check "daily timeout" on Show when main screen off. Seem u turn this function on at night
David_26 said:
I bought a used V20 with a defective screen. I change it, everything work for fine, but i notice a strange behaviour with the second screen.
The second screen is always on and i can unlock it by only touching the finger print sensor. BUT at night (or in the dark), the second screen turn off and i need to press 2 times on the power button to wake the phone.
The Knock On feature doesn't work too in the dark.
The light sensor seems to work correctly.
I would love to post a video but i can't......
This is an issue or it is normal ??
Thanks for your help !
Click to expand...
Click to collapse
thophan1975 said:
check "daily timeout" on Show when main screen off. Seem u turn this function on at night
Click to expand...
Click to collapse
Don't seems to change anything
Could it me the last security update ??
I reset the phone today and same "issue"
David_26 said:
Don't seems to change anything
Could it me the last security update ??
I reset the phone today and same "issue"
Click to expand...
Click to collapse
Sounds like there is an issue with the proximity sensor (not light sensor).
It's setup to turn the second screen off as well as disable knock on if the phone is in your pocket. Even during daylight hours if you put your finger within an inch of the sensor when the main screen is off, it should trigger it.
It seems your sensor may just be messed up.
David_26 said:
Don't seems to change anything
Could it me the last security update ??
I reset the phone today and same "issue"
Click to expand...
Click to collapse
There are a few apps on the play store you can try to fix it if you are rooted. You could also try a sensor app to see if the proximity sensor is showing feedback properly although you might need to be rooted for the apps to show the proximity sensor properly (not sure). My note 4 had a hardware test in the service menu not sure how to do it on V20 though.
Same Issue
Edit: Resolved the issue. Please read this post. There is a small rubber gasket-type thing that sits in the hole of the phone's frame where the proximity sensor is positioned. That rubber gasket was not included with my replacement screen. I pulled the rubber piece out of my original, broken screen, and installed it into my replacement screen. I am no longer having issues with the phone in the dark.
I am experiencing the same issue. I have a T-Mobile LG v20 (H918) and I cracked the screen last week. I ordered a replacement LCD assembly and installed it myself. Everything works fine during the day or in a well lit room, but at night, in a dark room, I experience all of the issues you are reporting. I am finding other posts online with our same issue, but as of yet, no resolution.
Even though the second screen is set to always be on, at night, in a dark room, it turns off almost immediately after locking the phone. It is almost as if the phone is in a "deep sleep" or something, because the following also occurs:
Knock On will not wake the phone
Fingerprint sensor will not wake the phone
Even connecting to the phone via AirDroid / AirMirror the phone doesn't wake
Need to press the power button multiple times to wake phone
Providing a light source immediately turns on second screen and resolves all issues

Categories

Resources