Hi
I've update the MCU and after that I got 2 problems:
1) Radio not working at all ( try to change setting from Factory Settings and still not working).
2) AVIN ( the front camera ) it's work sometimes BUT mostly not working.
I've tried the following:
1) Go throw the settings and Factory settings make settings like original.
2) GO throw settings and Factory settings and try everything.
3) Change the MCU version ( until now I tried 8 files).
4) Flash the MCU and Flash the Rome ( also Conversely).
* I have chose the MCU file carefully based on the HU that I have.
Here is the link of the MCU that match the one that I have:
KLD MCU
Head Unit
Here is my ORIGINAL head unit info ( BEFORE UPDATES ):
MCU Version: MTCB-KLD1-V2.55
Android Version: 4.4.4_28052015
Kernel Version: 3.0.36+ [email protected] #262
Build Number: rk3188-eng4.4.4 28052015
I tried to search in this section looking for any solution but I got no luck
thanks
Same thing happened to me last night. Any solutions out there? My head unit is an Eonon GA5150F and I installed Mayalsks August ROM and the latest KLD mcu
rooot_999 said:
* I have chose the MCU file carefully based on the HU that I have.
Here is the link of the MCU that match the one that I have:
KLD MCU
Click to expand...
Click to collapse
Except that link points to 21 folders with MCU files in them. MOST of them are KLD, only a few are KLD1, which is what you have. Did you try the KLD1 MCU? And why are you shouting?
Well I tried KLD1, and it's the same.
I think we need the stock one.
By the way I figured how to run AVIN, you can do it through the steering wheel buttons(Mode) , this method works always, but still we need to run it through the screen.
For the radio issue I couldn't solve it until now.
I think we need to ask Eonon company to gives us the stock files.
Sent from my C6602 using XDA Free mobile app
Hello,
I have a problem with the radio too. I cant autosearch on the radio. If I put the frequency manually it works. But autosearch doesnt. Any idea? Trying to change in factory settings the type of radio but no change.
I have KDL2 v.267 from the factory, not done any update by me.
vlad_pelinescu said:
Hello,
I have a problem with the radio too. I cant autosearch on the radio. If I put the frequency manually it works. But autosearch doesnt. Any idea? Trying to change in factory settings the type of radio but no change.
I have KDL2 v.267 from the factory, not done any update by me.
Click to expand...
Click to collapse
Hi, this problem happened after update wrong MCU
Thanks for your answer. My MCU was never updated. So probably they (chinese) did it at the factory and put a bad MCU update? So you think i should downgrade to an older version. (kdl2 v2.67 is the newest version). I will try with KDL2 v2.55 an see if it works.
Sry for another of my post. I've tried a downgrade to kDL2 v2.55.Same problem. I've tried KDL 2.64. Same problem. But everything works on KDL and on KDL2 mcu update. Just the radio is not working.
vlad_pelinescu said:
Sry for another of my post. I've tried a downgrade to kDL2 v2.55.Same problem. I've tried KDL 2.64. Same problem. But everything works on KDL and on KDL2 mcu update. Just the radio is not working.
Click to expand...
Click to collapse
Ever get your radio working ?
chgogolfpro said:
Ever get your radio working ?
Click to expand...
Click to collapse
Yep. With the Mayalsks rom it works like charm. After installing Maya's ROM the radio start working.
radio fix
vlad_pelinescu said:
Yep. With the Mayalsks rom it works like charm. After installing Maya's ROM the radio start working.
Click to expand...
Click to collapse
I had this same problem. Reloaded the factor rom setting so i was back to the way it was when i bought it and still no radio. turns out it was a setting under factory settings. my pin to get abscesses was 121212 not 126 like the manual said. i had to select TDA7786 and do a factory reset and it worked fine. i have a pic but not sure how to add it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry for bumping this but I really don't know what to do.
I have a MTCD XRC which have worked somewhat well but now the radio is totally dead. I can't auto search channels, there is no radio noice or nothing. Audio works otherwise but the radio is totally gone.
I tried to do a factory reset, no change.
I went to factory settings to see what radio was selected like the photo above but I only have "YES" and "NO" to select, nothing else!
Anybody? Please?
Edit: It just died while listening to the radio in the middle of a song, it just went quiet and I have not been able to get it working again after that :/
Have you tried to upgrade the MCU?
also which room are you using? Is it stock?
rooot_999 said:
Have you tried to upgrade the MCU?
also which room are you using? Is it stock?
Click to expand...
Click to collapse
Yes I upgraded to the latest MCU for my model (XRC) and installed Maylask latest rom then the radio just went quiet and auto search not working. I then tried to change back both rom and MCU to stock, but still not working
I tried the above in factory settings but the only options I have under radio is "YES" and "NO". I can not select radio chip
I have the same issue. The 121212 (and m123456) codes work for getting to "factory settings" but on the Radio menu there's just YES/NO and no way to select a tuner chip. Anyone have any ideas? This is on a PX3 2GB Android 7.1.2 headunit.
Update: Switched to the Mayalsks ROM but that didn't help. I was hoping I would get to choose a radio module but it is still just YES/NO.
nirudha said:
I have the same issue. The 121212 (and m123456) codes work for getting to "factory settings" but on the Radio menu there's just YES/NO and no way to select a tuner chip. Anyone have any ideas? This is on a PX3 2GB Android 7.1.2 headunit.
Update: Switched to the Mayalsks ROM but that didn't help. I was hoping I would get to choose a radio module but it is still just YES/NO.
Click to expand...
Click to collapse
Any update on that one??
Related
Good Day
I would like to start this forum on Eincar Radios. I found the user manual and support poor and would like to contribute my findings and ask for help in areas where I'm stuck. Also based on my experience I find the carjoying support much better and would rather recommend people to look into this brand if they interested in android car radios
Radio Info
Processor Type: QuadCore-R16 1.6G
Android Version: 5.1.1
MCU: Version: 5.3.19-7-10-656201-170227
System Version: : 4.5.10_20170104
DVD Version: 2.13.15-860mc-150417
General Passwords that I found
1.) Factory Reset - 7890
2.) Developer Options - 7890
3.) Extra Settings - 123456
4.) USB Debugging - [email protected]
Open Questions I have
1.) Is Eincar the actual vendor/manufacturer of these radios?
2.) Can I upgrade this unit from Android 5.1 Lollipop to Android 6 Marshmallow?
3.) Where do I find firmware for this radio
4.) Youtube is not working and blurry with video display how do I fix this?
5.) My Huawei E3531 router does not work with the radio how do I fix this?
6.) How do I go into recovery/download mode?
Regards
Johann
I believe I have the same unit as you. The passwords and types of errors you listed are the same as mine. The MCU version matches as well. If you find anything else out let me know!
Are you sure this post belongs in MTCB - what details do you have to confirm the unit is an MTC*B*
looking for a firmware upgrade
Hi, I have the same radio and looking for a firmware upgrade ....
Does anyone know which is the right one?
Thank you
Processor typ:Quadcore-R16 1.6G
Android 5.1.1
MCU Version: 5.3.18-7-10-656201-160526-KADJAR
System version: 4.5.10_20160909
Youre in the wrong section - you dont have an MTCB unit.
Have you found out how to enter recovery mode I have an older version eincar double din that won't get past boot screen i have the software on it but I can't get the damn thing to boot I ended up buying a newer version running 6.0 but right now I have a radio that i know can be fixed I plugged it into my computer through a double sided usb cord my computer reads it but u can't get it to run
Sent from my SAMSUNG-SM-G935A using XDA Free mobile app
berry1222 said:
Have you found out how to enter recovery mode I have an older version eincar double din that won't get past boot screen i have the software on it but I can't get the damn thing to boot I ended up buying a newer version running 6.0 but right now I have a radio that i know can be fixed I plugged it into my computer through a double sided usb cord my computer reads it but u can't get it to run
Sent from my SAMSUNG-SM-G935A using XDA Free mobile app
Click to expand...
Click to collapse
why you cant pass the bootscreen? did you try to change it to a personalized one and messed the bootscreen?
if thats the case, with the car/ignition off, connect a wire from the red positive 12v to the wire that says reverse. turn ignition on, wait 30 seconds and remove the wire. this will make the radio boot in rear camera mode and bypass the bootscreen.
nosidefcp said:
why you cant pass the bootscreen? did you try to change it to a personalized one and messed the bootscreen?
if thats the case, with the car/ignition off, connect a wire from the red positive 12v to the wire that says reverse. turn ignition on, wait 30 seconds and remove the wire. this will make the radio boot in rear camera mode and bypass the bootscreen.
Click to expand...
Click to collapse
Ya so I just tried the reverse wire to the red wire it kicks into reverse but still doesn't so anything it's sitting at the android screen I tried to root the damn thing but Idk what happened
Please tell me the exact eincar model you have
terblaj3 said:
Radio Info
Processor Type: QuadCore-R16 1.6G
Android Version: 5.1.1
MCU: Version: 5.3.19-7-10-656201-170227
2.) Can I upgrade this unit from Android 5.1 Lollipop to Android 6 Marshmallow?
Click to expand...
Click to collapse
Try this https://yadi.sk/d/CEZ8Rwe_3KbMbj
Watch the video inside
ble not supported
Hi guys does anyone know how to add ble support to the head unit? Trying to use my airlift performance app and it won't work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SAMSUNG-SM-G935A using XDA Free mobile app
nosidefcp said:
Please tell me the exact eincar model you have
Click to expand...
Click to collapse
Blue tooth and wifi of EinCar FBAX-Jan262gncYcam (2 Din Car Stereo In Dash Head Unit Deck GPS Navigation Built-in 3D Map Bluetooth Support 3G Wifi android 4.2 OS) didn't work few day before (good working before). How can I fix it? I have hard searched but not to find firmware (MCU, System) for this one. Please help and show me link to download. Thanks.
Does anyone know how to access the Accessibility Settings menu?
****-jones said:
Try this https://yadi.sk/d/CEZ8Rwe_3KbMbj
Watch the video inside
Click to expand...
Click to collapse
Download limit reached. Can you upload it somewhere else?
I am really interrested in this file!!!
Thanks in common!
BR
Seq
Sequenzial said:
Download limit reached. Can you upload it somewhere else?
I am really interrested in this file!!!
Thanks in common!
BR
Seq
Click to expand...
Click to collapse
look here https://forum.xda-developers.com/an...te-quadcore-r16-tonghai-t3635779/post75288735
Eincar 7 resolution problem..
Please I need help.
Radio issues
Hi Guys, i have same double din radio and always after start my radio is start 87.50 MHz . All wire is connect proper when radio is start keep all saved station and start whit my custom logo that's mean the problem is not in power. Can you guys help me to setup radio to start normal or to change startup app like home screen not radio automatic. Thanks
Hi,
I recently bought a Octa-core/2GB RAM from China supplier, the screen is good but some apps don't really work. I want to tune it a little, but I can't identify the type of Head Unit from its MCU. It says that has OS Android 8.1, but I doubt it also.
MCU version: T8.3.19-182-41-A46101-180716
System version: V9.3.1_20181030.153507_TW2-FD
Here is a picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the same as my Xtrons TR771L, but I'm also looking for a place where to get updates for it.
I also have a similar head unit from WANQI.
It has android oreo 8.1.0 and as far as I can tell it is an Allwinner T8 unit
I would also like the password for the boot animation app.
The seller said it is 8888 or 123456 however this is not working.
lirycbv said:
The seller said it is 8888 or 123456 however this is not working.
Click to expand...
Click to collapse
Try 7890
alh84001 said:
Try 7890
Click to expand...
Click to collapse
Also 5678 code to change boot logo from settings.
foicanetadavo said:
Also 5678 code to change boot logo from settings.
Click to expand...
Click to collapse
Thank you for the suggestions however none of them work. I also tried 0000, 1111 .... 9999 and other suggestions from XDA.
I can change the boot logo in Extra setting (password 123456) but not the boot animation.
Also just as info the password for Developer options is 7890.
Does anyone know if there is any mcu update for this t8 unit i have? I am looking forward to improve sound quality of the base music.
lirycbv said:
Thank you for the suggestions however none of them work. I also tried 0000, 1111 .... 9999 and other suggestions from XDA.
I can change the boot logo in Extra setting (password 123456) but not the boot animation.
Also just as info the password for Developer options is 7890.
Click to expand...
Click to collapse
Please try Topway
Sent from my iPhone using Tapatalk
MCU
Iffihyd said:
Does anyone know if there is any mcu update for this t8 unit i have? I am looking forward to improve sound quality of the base music.
Click to expand...
Click to collapse
Hi,
I have an MCU update from December 2018, but the target vehicle is Ford Mondeo/Focus
Try these passwords:
3368 for factory reset;
3369 for extra settings.
hello my h.u. came with outdated zlink (carplay app), it crashes after a while using waze, i wanted do update it, donwloded the vesion on this forum, but couldn't do it, it fails while trying, so i guess it needs to be rooted in order to do so, i wanted to backup my version and try to install this updated version, and even maybe update the whole android (mine is 8.1 here), can anyone help me with it ? suggesting the program and room to do so, i'm not a experienced android user. thank you in advance !
PS the password that worked on mine was that 3369
sistema v9.3.1_20190520.102325_s300+octacore-11.8ghz+carplay
mcu: t8.3.19-16-10-656101-190522
Toncosta said:
Try these passwords:
3368 for factory reset;
3369 for extra settings.
Click to expand...
Click to collapse
I got the answer, this is ur password
Brother, I have the same unit on my Toyota fj
The car factory setting password 1617
Extra setting password 16176699
Ask the seller for the update, they usually have a flash stick with an update folder... I discovered that after complaining about some software issues
Good luck
I found some information may help you more
I found some information may help you more
****
After entering the engineering menu with a password of 16176699 instead of 1617 in itappearadvanced settings, like Style setting.Password there111333. Change the setting to 1,2,3,4changes the look of a native launcher;
Log in to the engineering menu of the Factory settingpassword1617 or, sometimes, forlarger numbersavailable settings 16176699. On some new PG password to enter the factory settings66668888. More possibleoption with 3368 and not only, still8888.
****
Hi.
i need a help of its possible.
I have citroen ds3 with radio android.
I need a update its possible?
the specs are in the picture.
thanks a lot
Olá a todos, preciso MCU
T8.3.19-11-16-453601-190814
OS V9.3.1_20190808.192723-KED8-0618-GT
Obrigado.
Hello guys i just got this unit a month ago rk3399 px6 android 9, 4gb + 64gb with ips display. I realize this unit is quite hot after 15-30 minutes of running music or video. After looking at other people installing heatsink & fan, i start buying the tools i need ( drill, mini grinder, 4cm usb fan (i choose usb because i can unplug when i dont want to use it by opening my drawer), heatsink ( not yet arrive), and super glue.
I just finish install the fan and i was happy with the result. Before installing the fan the temperature is around 42-78 C and after installing the fan the temperature is around 32-52 C.
The hardest part is making a hole in this project
The only problem i find in this unit is the brightness, i have set it to the lowest number but at night it still too bright and hurt my eyes. If any of you have solution please share.
You guys can share knowledge in this thread about STM32.
Sorry for my bad english.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i Have a headunit like this exactly but with 32gig rom. did a factory reset now radio and audio nolonger work.can you help?
simbac said:
i Have a headunit like this exactly but with 32gig rom. did a factory reset now radio and audio nolonger work.can you help?
Click to expand...
Click to collapse
Have you try another factory reset, i did mine and the radio and audio still working.
trulu said:
Have you try another factory reset, i did mine and the radio and audio still working.
Click to expand...
Click to collapse
thanx for the reply I did it a couple of times but still nothing. I think maybe the device lost its factory settings. how do I enter the factory settings menu on this device? And where can I get the firmware for this device as well. Will you be able to make a dump of the software for me from your unit maybe it can work after reinstallation.
simbac said:
thanx for the reply I did it a couple of times but still nothing. I think maybe the device lost its factory settings. how do I enter the factory settings menu on this device? And where can I get the firmware for this device as well. Will you be able to make a dump of the software for me from your unit maybe it can work after reinstallation.
Click to expand...
Click to collapse
Sorry i cant help much, i dont know how to extract the firmware from my unit, have you contact the seller for help?
trulu said:
Sorry i cant help much, i dont know how to extract the firmware from my unit, have you contact the seller for help?
Click to expand...
Click to collapse
i did contact banggood thats where l bought it, the seller does not have the firmware. dont know how that could be possible
simbac said:
i did contact banggood thats where l bought it, the seller does not have the firmware. dont know how that could be possible
Click to expand...
Click to collapse
Since they are reseller, ask them to contact seller in china who help them selling the unit. Maybe they will help.
Hi, I have the same unit from bangood too. Is it possible to root? My rds radio show only station name and not the song name as other rds radio..can it be fixed? It is any possibility for a firmware as other PX6 unit?
ghino said:
Hi, I have the same unit from bangood too. Is it possible to root? My rds radio show only station name and not the song name as other rds radio..can it be fixed? It is any possibility for a firmware as other PX6 unit?
Click to expand...
Click to collapse
Sorry, i use spotify and music, dont know much bout the radio.
I dont think this unit can be root. Since no one support/help modified the firmware or software.
guys help me I need firmware and mcu for this device is corrupted. Banggod dont have the firmware of they just dont want to give me
This unit seems good to me. It is new so there are not firmware and mods but we need some a modder that looking to it. For firmware I think bangood is only a restseller would find the product or.
simbac said:
guys help me I need firmware and mcu for this device is corrupted. Banggod dont have the firmware of they just dont want to give me
Click to expand...
Click to collapse
II have a firmware from Erisin for this device. Unfortunately I can not set any links here.
I have a firmware zip for this unit, the update file is called 'os_update_KC1E0101-P01-1.1.4.3.1_20190819_182727.zip'
What would be the best way to post the zip?
hanspatt said:
II have a firmware from Erisin for this device. Unfortunately I can not set any links here.
Click to expand...
Click to collapse
Thanx for the reply can you use google drive and pm me or email the link to my email address [email protected]. thanx in advance
---------- Post added at 09:09 PM ---------- Previous post was at 09:08 PM ----------
mcrw27 said:
I have a firmware zip for this unit, the update file is called 'os_update_KC1E0101-P01-1.1.4.3.1_20190819_182727.zip'
What would be the best way to post the zip?
Click to expand...
Click to collapse
can you try google drive maybe and email me the link if possible. thanx in advance. my email is [email protected]
hello also I would need this firmware and mcu please where I can download it
[email protected]
mcrw27 said:
I have a firmware zip for this unit, the update file is called 'os_update_KC1E0101-P01-1.1.4.3.1_20190819_182727.zip'
What would be the best way to post the zip?
Click to expand...
Click to collapse
Any luck? I think your firmware is the right one for my device. please help
Hi, can you send link in pm,please?
mcrw27 he promised to lay out the firmware and disappeared somewhere.
mandarino22121958 said:
hello also I would need this firmware and mcu please where I can download it
[email protected]
Click to expand...
Click to collapse
i have send the link to you
really thanks thanks, now I have to figure out how to load it on the device because I currently have a blue screen.
do you have any idea how to do it?
Hi Everyone
Recently purchased a unit with the below specs:
APPVER: K2001N_NWD_S212701.20191226.212334.01
PlatformVER: K20N-2019/12/26
MCUVER: V3.0-FF01-20190909-A02-CAN0000-00-00-DVD0000000000-00
BTVER: GOC_XR829_4.0/2019/10/24
CANAPPVER: v19.12.23A
CANBOXVER: raise
I have 2 questions:
1. Where can I find firmware for this unit?
2. The "factory settings" menu seems to have an issue on "Gain Settings". I make changes to the gain on the ports but when it reboots it goes back to 0.
Any help would be appreciated.
Thanks
jitenm said:
Hi Everyone
Recently purchased a unit with the below specs:
APPVER: K2001N_NWD_S212701.20191226.212334.01
PlatformVER: K20N-2019/12/26
MCUVER: V3.0-FF01-20190909-A02-CAN0000-00-00-DVD0000000000-00
BTVER: GOC_XR829_4.0/2019/10/24
CANAPPVER: v19.12.23A
CANBOXVER: raise
I have 2 questions:
1. Where can I find firmware for this unit?
2. The "factory settings" menu seems to have an issue on "Gain Settings". I make changes to the gain on the ports but when it reboots it goes back to 0.
Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
Could you detail brand and model and attach a photo of the unit?
ultradj83 said:
Could you detail brand and model and attach a photo of the unit?
Click to expand...
Click to collapse
Hi
I cannot post a link to the website yet but here are the specs on the site. It does not have a brand name on it.
From bidborbuy.co.za
VW 7" Android 8.1 Touch Screen Car Radio For VW Multimedia Player with GPS Navigation Bluetooth USB
Specifications:
Model: VW Player
Decoding Chip: MTK 8227L
Cpu: A7 1.3GHZx4
Size:7 Inch
Memory 1G Storage 16G
FM Radio:87.5~108MHz
Voltage:12V
Bluetooth: Bluetooth 4.0
USB: USB2.0
Audio Amplifier: TDA7388
Hardware is really similar to my unit, both based on 8227L and TDA7388.
I can send the firmware I'm running to you, but no idea if it will run, it might brick your unit.
It works quite fine, but there's 2 problems:
1. Sometimes GPS is slow to fix.
2. On incoming calls it takes up to 10 seconds to start incoming voice, while outgoing voice starts immediately.
ultradj83 said:
Hardware is really similar to my unit, both based on 8227L and TDA7388.
I can send the firmware I'm running to you, but no idea if it will run, it might brick your unit.
It works quite fine, but there's 2 problems:
1. Sometimes GPS is slow to fix.
2. On incoming calls it takes up to 10 seconds to start incoming voice, while outgoing voice starts immediately.
Click to expand...
Click to collapse
Please send me the link, I was not concentrating and loaded a Russian version this afternoon :laugh:
Trying to find the original version but not winning, I would appreciate the link.
Thanks!
jitenm said:
Please send me the link, I was not concentrating and loaded a Russian version this afternoon :laugh:
Trying to find the original version but not winning, I would appreciate the link.
Thanks!
Click to expand...
Click to collapse
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
ultradj83 said:
Hardware is really similar to my unit, both based on 8227L and TDA7388.
I can send the firmware I'm running to you, but no idea if it will run, it might brick your unit.
It works quite fine, but there's 2 problems:
1. Sometimes GPS is slow to fix.
2. On incoming calls it takes up to 10 seconds to start incoming voice, while outgoing voice starts immediately.
Click to expand...
Click to collapse
ultradj83 said:
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
Click to expand...
Click to collapse
Thanks! Will give this a try
I have a backup unit to install if i break this one so I will play around
Not MTCB.... Requesting Mod move
DIdn't work unfortunately.
I will need to find the chinese original k2001n_nwd firmware for this to get back to normal :laugh:
Will do some digging
Hi again
Managed to source the correct firmware from the russian forums.
The only issue I have is that the gain settings revert back to 0 when saving the config. I am trying to increase the bluetooth/usb volumes but it does not save the changes.
Anyone have a fix for this?
ultradj83 said:
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
Click to expand...
Click to collapse
I can't acces to the link
Alessolabestia said:
I can't acces to the link
Click to expand...
Click to collapse
ultradj83 said:
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
Click to expand...
Click to collapse
Can give again the link for i try whit mine
Thanks
Dear,
as a long time has passed I don't remember exactly what file I shared through that link...
What's your modem (a pic might be useful)?
What's your problem?
i brick my unit and i need image for allwinner t3 k2001 i thinks is ( t3-p2 )
ultradj83 said:
Dear,
as a long time has passed I don't remember exactly what file I shared through that link...
What's your modem (a pic might be useful)?
What's your problem?
Click to expand...
Click to collapse
i brick my unit and i need image for allwinner t3 k2001 i thinks is ( t3-p2 )
copas15 said:
i brick my unit and i need image for allwinner t3 k2001 i thinks is ( t3-p2 )
Click to expand...
Click to collapse
Please send a picture and model specs as I'm not sure what mirror you have...
Greshare GS18950 DMSM5BE Android 8.1 DVR Mirror firmware, tools and bugs list
Hello there. This is the DMSM5BE: DMSM5BE_116_Media_Sleep_2020120715 firmware and tools attached. Known bugs: Wi-Fi off after reboot Bluetooth off after reboot CarKeeper app video streaming not working Park Monitor not working Awful UI...
forum.xda-developers.com
I need miudrive screen please
Hello , I also purchased the same.. with 1Gb ram. Is there any way to increase the RAM externally? I mean like using a class 10 memory card? Maybe its a dumb idea as I'm not a techie. I wanted to increase the RAm because Waze is not fluid smooth in the device. Thanks in advance
請問usb讀不到，要如何處理，謝謝！！
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AC8227L Android head unit 2gb/32gb
Sound Processor TM2313
MCU version jcnu20-0-2022.04.21_09:45
Panel Info MIPI_1024x600-2021/7/7 21:10:55
System Version: JCAC10003-OC2-V1.0.20R2-220509_1437-AA
What can i change on this system of mine, any upgrades supported on this unit??
Cruizertz said:
AC8227L Android head unit 2gb/32gb
Sound Processor TM2313
MCU version jcnu20-0-2022.04.21_09:45
Panel Info MIPI_1024x600-2021/7/7 21:10:55
System Version: JCAC10003-OC2-V1.0.20R2-220509_1437-AA
What can i change on this system of mine, any upgrades supported on this unit??
Click to expand...
Click to collapse
Hello Cruizertz, I have the same device but 1g/16g
In the radio app can you save the stations and not delete them when you turn on the device again? This happened to me when the seller sent me a firmware to solve another problem and now it doesn't give me a solution and I don't know how to get everything right again since I didn't make a backup copy.
fraldide said:
Hello Cruizertz, I have the same device but 1g/16g
In the radio app can you save the stations and not delete them when you turn on the device again? This happened to me when the seller sent me a firmware to solve another problem and now it doesn't give me a solution and I don't know how to get everything right again since I didn't make a backup copy.
Click to expand...
Click to collapse
Do you need the last update yet?
Hello Cruizertz,
yes a need!! where can i get it?
fraldide said:
Hello Cruizertz,
yes a need!! where can i get it?
Click to expand...
Click to collapse
I think you ask to me for update and not to Cruizertz, really?
Sorry I got the name wrong!! if it's you
Яндекс
Найдётся всё
disk.yandex.ru
First unzip the folder, and just copy the Update folder (inside there are more folders, don't touch). Second, put the Update folder on a flash drive and insert it into the USB² (you have two USB ports on the headunit, must be with the number USB².
Third: the system asks you if you want to update, you must give OK or wait 5 seconds. The copy of the files will begin, do not touch anything, and you will see how the lights blink
Fourth: do not touch anything, when the update is done the unit will turn off, and when it turns on again the lights will continue to flash, and after about 30 to 60 seconds it will start updating again. Never remove the flash drive or touch anything until the message appears at the bottom indicating that the update has finished.
When you're done, tap ok. Everything has been deleted from the headunit, and you must reinstall everything you had before.
Important: if you had the Apps from a vendor, such as Podofo or Jancar, they are deleted. If you had any map App too, but if you need Here Maps tell me.
If you are not sure what I explain, if you can wait, maybe 3 hours, I can do a video to show you
meidland said:
If you are not sure what I explain, if you can wait, maybe 3 hours, I can do a video to show you
Click to expand...
Click to collapse
Perfecto meidland, I think it's pretty clear what the process is like. I don't think I can try it today, but tomorrow I will. thanks. I'll tell you when I do.
fraldide said:
Perfecto meidland, I think it's pretty clear what the process is like. I don't think I can try it today, but tomorrow I will. thanks. I'll tell you when I do.
Click to expand...
Click to collapse
It's very easy, you will see. I forgot to tell you that is the last update at the moment, from 14.10.2022 or 10.14.2022 in English, I think
Thank you very much for your help meidland. I was able to search for a moment and have installed it and everything is working perfectly. It has corrected a problem that I had with the radio app, after a firmware that the seller had sent me to correct something else and then did not want to know anything. That's why I thank you, for helping me.
Greetings
Meidland please do a video to show the update process
meidland said:
Яндекс
Найдётся всё
disk.yandex.ru
First unzip the folder, and just copy the Update folder (inside there are more folders, don't touch). Second, put the Update folder on a flash drive and insert it into the USB² (you have two USB ports on the headunit, must be with the number USB².
Third: the system asks you if you want to update, you must give OK or wait 5 seconds. The copy of the files will begin, do not touch anything, and you will see how the lights blink
Fourth: do not touch anything, when the update is done the unit will turn off, and when it turns on again the lights will continue to flash, and after about 30 to 60 seconds it will start updating again. Never remove the flash drive or touch anything until the message appears at the bottom indicating that the update has finished.
When you're done, tap ok. Everything has been deleted from the headunit, and you must reinstall everything you had before.
Important: if you had the Apps from a vendor, such as Podofo or Jancar, they are deleted. If you had any map App too, but if you need Here Maps tell me.
Click to expand...
Click to collapse
Please link not work ...
Hi, after I update with the update from 10/14/22 was not a good update and I report to Factory and the said is better the update from 07/08/22 , I tried and is the best at the moment.
Link here
Firmware11-1024x600-220708-1241AutoUpdate.zip
drive.google.com
meidland said:
Hi, after I update with the update from 10/14/22 was not a good update and I report to Factory and the said is better the update from 07/08/22 , I tried and is the best at the moment.
Link here
Firmware11-1024x600-220708-1241AutoUpdate.zip
drive.google.com
Click to expand...
Click to collapse
the official Podofo seller I bought the head unit from, sent me this link to my own 2gb/32gb unit... i'll try next day
Яндекс
Найдётся всё
disk.yandex.ru
I click on restore factory settings, and now, the radio is starting ... And not work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
isbsalgado88 said:
I click on restore factory settings, and now, the radio is starting ... And not work.
Click to expand...
Click to collapse
RonaldoRisso said:
the official Podofo seller I bought the head unit from, sent me this link to my own 2gb/32gb unit... i'll try next day
Яндекс
Найдётся всё
disk.yandex.ru
Click to expand...
Click to collapse
Update is ok, thanks so much
Cruizertz said:
AC8227L Android head unit 2gb/32gb
Sound Processor TM2313
MCU version jcnu20-0-2022.04.21_09:45
Panel Info MIPI_1024x600-2021/7/7 21:10:55
System Version: JCAC10003-OC2-V1.0.20R2-220509_1437-AA
What can i change on this system of mine, any upgrades supported on this unit??
Click to expand...
Click to collapse
can i install yt9213 or yt9216?
Cruizertz said:
AC8227L Android head unit 2gb/32gb
Sound Processor TM2313
MCU version jcnu20-0-2022.04.21_09:45
Panel Info MIPI_1024x600-2021/7/7 21:10:55
System Version: JCAC10003-OC2-V1.0.20R2-220509_1437-AA
Click to expand...
Click to collapse
I have the same unit 1gb 16gb my firmware has corrupted. Kindly help post a link where i can download and reinstall?