[Q&A] [root] T-Mobile Galaxy Tab 4 8.0 T337 - Galaxy Tab 4 Q&A, Help & Troubleshooting

Q&A for [root] T-Mobile Galaxy Tab 4 8.0 T337
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [root] T-Mobile Galaxy Tab 4 8.0 T337. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

thanx i will try

Unable to Root Tab 4
I recently bought a Tab 4 , it was below market price as it seems to be a tester device or pre-release you may say.
After buying it i tried to update the original firmware but it couldnt update.
Then i tried to root it , however it became softbricked and no matter what i did it never was able to install the RoM.
I also observed some bit increased in the initial display as when i turn it on the first screen i see is some commands on the top left side.
Anyway the shop i got it from they replaced it just this once. However now i am again unable to update firmware , even the google play is not updating the installed applications.
Can someone here advise me if this device in current settings can be rooted to install the original ROM. What should i make sure to check for before rooting...
Google Play gives error 492 after failing app updates.
Edit : i believe after i rooted the first one the bootloader got corrupted , also it said something about not being able to write to partition or something.

Bootloader Status??
Is the bootloader already unlocked on this device, or does one have to unlock it themselves?

Are there any developers that can make a custom rom for the t337t? I have not seen any floating around the internet

guardian715 said:
Are there any developers that can make a custom rom for the t337t? I have not seen any floating around the internet
Click to expand...
Click to collapse
You find any roms? Would be nice if someone could port over the bliss pop rom from the 10.1 lte tmobile model.
Sent from my SM-T337T using XDA Free mobile app

Related

[Q&A] [ROM][Official][4.4.2] SlimKat Stable 3.0

Q&A for [ROM][Official][4.4.2] SlimKat Stable 3.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Official][4.4.2] SlimKat Stable 3.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Nice ROM
Absolutely love the ROM, but I can't recieve phone calls for some reason, the phone on the other end rings but nothing shows up on my screen, it doesn't register a missed call either.
I just flashed v8.14weekly clean and I have only 2 questions.
1 - is there a fix for the gyro/compass? Does anyone else have any issues on their device using gyro or compass based app?
2 - is theming ever going to be supported by slim?
sj
Sent from my Customized & Carbonized S4 (SPH-L720) - 8/3/14 aOS 4.4.4 with KTkernel 7/12 using [email protected] HD Pro Mobile App
4.X based CarbonROM - $J$harksfan Customized
How do I replace the system superuser with supersu? The system superuser is causing problems with titanium backup
Can't connect to sprint service after flashing with odin
Hello all, I successfully flashed a sprint phone from another owner to the slimkat stable Rom. The problem happened when I went to get it switched over to my service plan when he put the imei number in and rebooted it continued to look for service without ever connecting. Any ideas?
are these custum rom are carrier unloked internationally.?
i am living in india and i want to use a custum rom that support indian carrier so plz tell me can i use these custum roms or not plz.....

[Q&A] [Q] Any news/updates on Android 5.0 OTA for I9505G?

Q&A for [Q] Any news/updates on Android 5.0 OTA for I9505G?
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Q] Any news/updates on Android 5.0 OTA for I9505G?. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
yep, was just notificated that theres 5.0.0 available for the i9505G
Uploading it right now for the devs
Installation of android 5.0 lollipop GPE for galaxy S4 GT-9505 no GPE
Hello finally to come lollipop for galaxy s4¡¡
Is there any developer who has adapted this rom for Galaxy S4 GT-I9505 no GPE?
I look forward very much to install it on my Galaxy S4 GT-I9505 no GPE.
Thank you
jpovedam said:
Hello finally to come lollipop for galaxy s4¡¡
Is there any developer who has adapted this rom for Galaxy S4 GT-I9505 no GPE?
I look forward very much to install it on my Galaxy S4 GT-I9505 no GPE.
Thank you
Click to expand...
Click to collapse
they're at it do not worry when ready and take out, we all have lives apart from mobile
ok, I'll wait your messages.
Thank you very much.
Jose
Hi, I have several questions about the installation of the rom "[ROM] 【5.0】 Google Play Edition LRX219 - 12/13/2014" of Danvdh.
I have a Samsung Galaxy S4 GT-I9505 with samsung official rom and stock kernel.
I can install the rom "[ROM] 【5.0】 Google Play Edition LRX219 - 12/13/2014" of Danvdh.?
Forum described as installing new rom GT-I9505 international devices you need to change stock kernel.
I do not understand the international model is not GT-i9500 ????
I need to change the stock kernel for another of "Alucard" or "googy"?
Thanks to all
It is unfair
Thanks for responding so quickly
It seems unfair not to let me write to the main forum.
I leave here on this side forum and not answer me, is unfair.
I have Samsung Galaxy S4 GT-I9505 with stock rom and kernel and I have updated the rom "[ROM] 【5.0】 LRX219 Google Play Edition - 12/14/2014" of Danvdh.
Say that although I know that nobody is going to answer, that this wonderful rom works correctly.
*In more than 24 hours using it, I have not had any "RR", all working properly, wifi, 3G, GPS, bluethoot, apps, maps, everything perfect.
I have observed only a small bug icon gsm signal strength.
Danvdh, Thank you very much and congratulations on your great work, yesterday I made a small donation $ to encourage you to always follow through with your work.
Thank you very much, but simply have not allowed me to participate.
ok, I'll wait your messages.
Thank you very much.
Jose

[Q&A] ROMS for T230NU

Q&A for ROMS for T230NU
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for ROMS for T230NU. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
nl3142 said:
Well I would think that you would need a working custom recovery with external SD card support first. Though the big feature I am looking forward to is a kernel that supports Roehsoft Ram Expander (swap) which while it works fine on my S3 does not work at all on the Tab 4 7.0.
Click to expand...
Click to collapse
well on my tab 7.0 swap work perfect ! and it's supported in samsung kernel configuration :good:
T230/T231 CM11 boot error
Hi All
I am hoping someone can assist with the following error I am getting when attempting to boot CM11 on my Galaxy Tab 4 7" (T231)
I am using the repo in the following post: http://forum.xda-developers.com/showpost.php?p=59638497&postcount=31
It seems Sultanxda was able to boot the device (T230), however the CM11 boot animation starts and fails with the following error (logcat):
http://pastebin.com/chtruDX7
Thanks in advance!
Cannot reply to thread ( http://forum.xda-developers.com/showpost.php?p=59638497&postcount=31 ) as I have not posted enough on the forum :/
Anyway ..
So I had finally got CM11 to boot on my T231 3g model, but it is laggy and nothing is working (no wifi, mobile, sdcard, bluetooth)
I have used MaxiCM (https://github.com/maxicm"]https://github.com/maxicm) device tree and T231 kernel from Samsung to get it up and running with some tweaks / hacks.
This is my first attempt at porting a ROM (chose a bad device) and with limited time will not allow me to invest more time into it, I hope there are experienced ROM developers who will invest more time and effort into this, CM will run much better than Samsung's Touchwiz.
I will follow and learn from other devs on how to port roms as I would like to attempt this in future.

[Q&A] [MOD][4.4.2] Native Tether Exploit for XT907 Build 183.46.10/ Build 182.46.10

[Q&A] [MOD][4.4.2] Native Tether Exploit for XT907 Build 183.46.10/ Build 182.46.10
Q&A for [MOD][4.4.2] Native Tether Exploit for XT907 Build 183.46.10/ Build 182.46.10
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [MOD][4.4.2] Native Tether Exploit for XT907 Build 183.46.10/ Build 182.46.10. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Help Needed for moto xt907
Dear Sir,
I personally find ur forum very much useful for concern cell.
I have a xt907 cell phone brand new condition and unlocked to use in india. For CDMA operator.
But a problem is hotspot not working.
I went through ur forum and found some files given by you to alter.
I checked my version in cell is 182.46.15xt907.
Now I need ur help.
Pls provide suggestion for this version.
Thankyou & hope to hear from u.
Help Needed for moto xt907
Dear Sir,
I personally find ur forum very much useful for concern cell.
I have a xt907 cell phone brand new condition and unlocked to use in india. For CDMA operator.
But a problem is hotspot not working.
I went through ur forum and found some files given by you to alter.
I checked my version in cell is 182.46.15xt907.
Now I need ur help.
Pls provide suggestion for this version.
Thankyou & hope to hear from u.
I hope your system version is out of date.
If you don't want to root and install any custom ROMs , update your software version and try!!
I tried using the build.prop in first port of this thread.
I'll admit right off the bat that I am a dumbass and didn't read the entire thread. Actually, I was a double dumbass and used a build.prof from a Droid Ultra. It made my screen resolution weird. All the icons were too big and the text overlapped.
So my phone is 183.46.15... The first build.prop file in this thread is for 183.46.10.
It DOES work on my phone. HOWEVER, my phone keeps prompting me to download the OTA update to 183.46.15... Which I already have.
I suspect that downloading the OTA update will not only break my HotSpot capability, but also my root access.

[Q&A] [GUIDE][K920] Revert back to KitKat - stock ROM - Lenovo VIBE Z2 Pro

Q&A for [GUIDE][K920] Revert back to KitKat - stock ROM - Lenovo VIBE Z2 Pro
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE][K920] Revert back to KitKat - stock ROM - Lenovo VIBE Z2 Pro. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Device stuck at Lenovo splash screen after reboot
Hello,
I have tried the above and after reboot the device is stuck at the lenovo splash screen (it shows 'lenovo' and 'powered by Android' in white on black background). Is that related to the size of the file that requires a while to be processed or is it a bug symptom. In the first case I am wondering how long I should wait, or can I drop the device right away...
Thanks a lot.
My K920 is now dead
I tried the above and my K920 is now dead.
When booting it is stuck at the LeNovo splash screen.
When trying to revert again then I get an error message that the Fuse file is not available.
Not possible to format and not possible to mount the K920 drive via USB on Linux.
Windows won't even find any drive...
very nice
very nice
I am a novice in android. Planning to revert my phone from lollipop to kitkat but I cann't find the root directory. Can you give me step by step procedure. Thank you . By the way my os now is VIBEUI_V2.5_1526_5.574.1_ST_K920.
QA Bot said:
Q&A for [GUIDE][K920] Revert back to KitKat - stock ROM - Lenovo VIBE Z2 Pro
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE][K920] Revert back to KitKat - stock ROM - Lenovo VIBE Z2 Pro. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Click to expand...
Click to collapse
Same fate happen to my k920. It's stuck at the opening logo. Any help to rescue it wi
QA Bot said:
Q&A for [GUIDE][K920] Revert back to KitKat - stock ROM - Lenovo VIBE Z2 Pro​
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE][K920] Revert back to KitKat - stock ROM - Lenovo VIBE Z2 Pro. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Click to expand...
Click to collapse
Same fate happen to my k920. It's stuck at the opening logo. Any help to rescue it will be appreciated.
RochNickols said:
I tried the above and my K920 is now dead.
Click to expand...
Click to collapse
gotan357 said:
Same fate happen to my k920. It's stuck at the opening logo. Any help to rescue it will be appreciated.
Click to expand...
Click to collapse
I'm sorry to hear that. It worked for me just fine. Are you using ROW (international) phone version?
If so, I can help you recover the device.
As long as the screen goes on, everything can be fixed.
Electry said:
I'm sorry to hear that. It worked for me just fine. Are you using ROW (international) phone version?
If so, I can help you recover the device.
As long as the screen goes on, everything can be fixed.
Click to expand...
Click to collapse
Hi, I bought and I'm using this device in Europe. Can I use this ROM or do I need "international" one?
I've done it. Everything went smoothly. Thank you very much for this. I like KitKat more than Lollipop, because with last one I've had issues with mobile internet. Phone freezes five times a day after upgrading to Lollipop.
[GUIDE][K920] Revert back to KitKat - stock ROM - Lenovo VIBE Z2 Pro
Hi lads, complete noob here. Ya I'm now stuck at back and white screen with "Lenovo powered by android" after following the above steps. My phone is bought from china so any help with a fix for this or how to flash this rom to the Chinese version of this phone.
Thanks
godoverall99 said:
Hi lads, complete noob here. Ya I'm now stuck at back and white screen with "Lenovo powered by android" after following the above steps. My phone is bought from china so any help with a fix for this or how to flash this rom to the Chinese version of this phone.
Thanks
Click to expand...
Click to collapse
I've explicitly stated that this is only for ROW (rest-of-the-world) version of the phone, not the CN (chinese) one. I don't own CN device therefore I can't really help you, but you should be able to find a guide (eg.) how to restore your firmware, either via QFIL utility or some other way. There is a difference between ROW and CN versions of the phone, so please, keep that in mind.
Best of luck I'm sure you'll be able to recover your device.
hi i mess up a bit with my k920.. and brick it but is back to live but now got issue with sim cards.. lost imei from them and sn.. anyone had this before?
is there a way to flash imei and sn ?
Electry said:
I've explicitly stated that this is only for ROW (rest-of-the-world) version of the phone, not the CN (chinese) one.
Click to expand...
Click to collapse
For those of you in this thread who are not sure how to tell which phone you have:
One easy way identify your phone type: China or ROW, is to check the Software version number in Settings->About phone->Version information.
The Chinese version will have VIBEUI in the version string while the ROW will have ROW.
If your phone has the VIBEUI firmware installed then you must not try to flash the phone with ROW firmware, or vice versa. If you do, the best case scenario is that you can't make any calls and the worst case is total brickage. The reason for this is that these two versions of phones have different hardware inside.
Thanks bro, lollipop has a lot of bugs
I have CN version and I'm looking for KK stable and multilanguage(include polish) with working sim. Anyone can recommend me any good one?

Categories

Resources