I have Phicomm C230w which is exactly ZTE Open C as far as the specs are concerned, same processor, same screen size and so on.
Just wanted to know if its possible to flash Firefox OS on the device.
Any reply will be highly appreciated
have phicomm released any kernel source or firmware updates for it so we could look at the kernel config?
hecatae said:
have phicomm released any kernel source or firmware updates for it so we could look at the kernel config?
Click to expand...
Click to collapse
Not as far as I know, it does have Android 4.2 installed though
a jellybean kernel and hal may be enough for us to get gecko booting on it.
is the bootloader unlocked, can you issue fastboot commands?
Hello,
I build CWM recovery and Philz touch recovery for this device :
http://forum.xda-developers.com/android/general/rom-cwm11-recovery-port-phicomm-c230w-t2871370
And the kernel is available at :
http://gpl.phicomm.com/
Related
Hey guys, today after a long time i came back around to this subforum to see if there are any news for my yoga 2 380f but all i found were closed threads?! wtf happened?
after so many months of waiting one could finally unlock the bootloader and install a custom recovery - but now even the posts in these threads are empty.... why?
I am in the mids of gathering all the files that I did manage to get before they were removed. My tab is 1050f. Have all the stuff somewhere fore it
Sent from my SM-G901F using Tapatalk
I suspect a New dedicated forum
New TWRP 2.8.7.0 for YT2 1050 soon !
Hello !
Was CLOSED because not respected XDA rules about GPL !
Almost all work here on XDA require open source code ... he preferred to erase everything he did here instead to provide source code
About TWRP :
A recovery image does contain a Linux kernel which is under GPLv2, and the TWRP source code is under GPLv3 (see the license header in https://github.com/omnirom/android_b...d-6.0/twrp.cpp)
Click to expand...
Click to collapse
On the other hand, tomorrow I'll provide a new TWRP 2.8.7.0 UI 6.0 for Yoga Tablet 2 1050 !
I already managed to fix kernel issue on Stock Lenovo Kernel Android L .
I already pushed all my work on my github : twrp-yt2 for TWRP 2.8.7.0 and also for kernel ! I'll update kernel very soon , because right now is stock one .
Also in a short time I'll try to make a cm-13.0 for our device .
Best regards !
surdu_petru said:
Hello !
Was CLOSED because not respected XDA rules about GPL !
Almost all work here on XDA require open source code ... he preferred to erase everything he did here instead to provide source code
About TWRP :
On the other hand, tomorrow I'll provide a new TWRP 2.8.7.0 UI 6.0 for Yoga Tablet 2 1050 !
I already managed to fix kernel issue on Stock Lenovo Kernel Android L .
I already pushed all my work on my github : twrp-yt2 for TWRP 2.8.7.0 and also for kernel ! I'll update kernel very soon , because right now is stock one .
Also in a short time I'll try to make a cm-13.0 for our device .
Best regards !
Click to expand...
Click to collapse
Can I ask what device you are using as a Base or are you building a vendor folder from scratch
Thanks for your work. Looks like you have implemented pixel finger, I will try this later
pug1 said:
Can I ask what device you are using as a Base or are you building a vendor folder from scratch
Thanks for your work. Looks like you have implemented pixel finger, I will try this later
Click to expand...
Click to collapse
Yes, was started from scratch... should be OK for all YT2.
Also pixelflinger for _X86 are implemented, twrp works fine. ... and sure will work on stock Lenovo kernel for Android L.
Best regards.
I take it you will solve the vendor blobs as you build to find them out?
I have twrp 3.0.0-0 source so will try with that.
You said the kernel is solved? It will build if I sync your github? Have you built a kernel yet? If so what toolchain are you using? I couldn't get it to build as it could find my toolchain.
From the branch 5.1 on your github, it won't work with cm13 source?
Again thanks for your work matey
pug1 said:
I take it you will solve the vendor blobs as you build to find them out?
I have twrp 3.0.0-0 source so will try with that.
You said the kernel is solved? It will build if I sync your github? Have you built a kernel yet? If so what toolchain are you using? I couldn't get it to build as it could find my toolchain.
From the branch 5.1 on your github, it won't work with cm13 source?
Again thanks for your work matey
Click to expand...
Click to collapse
Kernel and also twrp must be compiled along with cm-12.1.
As I already said , my kernel source cannot be compiled ...( Lenovo do not provide a complete one ), but I'll update today later in order to fix all Lenovo issues.
Best regards.
New TWRP 2.8.7.0 for YT2 - 1050 ! Source code already available !
Meizu pro 5 stock
Changelog:
+ Base meizu rom
+ original
+ No lost bootloader
+ support update no wipe data
+ support kernel with synapse tks to dev Russia
How to install
Step1: boot TWRP
Step2: 4wipe if you downgrade rom fw
Step3: install rom
Step4: reboot
Step5: If want root pls flash super SU and kernel mod
Note: IF use kernel pls, click setting/power management settings / power mode
Battery will very good
Link download all (TWRP,super su, rom,kernel)
Google driver
XDA:DevDB Information
Meizu pro 5 Stock original, ROM for the Meizu MX
Contributors
29y6145
ROM OS Version: Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.1.1
Version Information
Status: Beta
Stable Release Date: 2016-04-01
Beta Release Date: 2016-04-01
Created 2016-03-31
Last Updated 2016-03-31
Hello dear!
Please show respect to another people efforts and specify the authors of TWRP port for PRO5 and Ultimate Kernel for PRO5 you have used here.
PS: I'm the author of TWRP port. It's almost working except some issues with decon framebuffer weirdness (you will notice some screen ui blinking and lags).
Original link to look for further updates: http://xep.8800.org/pro5/
PPS: Be aware of LOCKED BOOTLOADER if you flashing stock rom with this recovery! Replace original bootloader file first with unlocked one inside update.zip or remove bootloader flashing line from updater-script! If something goes wrong in this case there is a chance to get locked bl and non-functional recovery!
faust93 said:
Hello dear!
Please show respect to another people efforts and specify the authors of TWRP port for PRO5 and Ultimate Kernel for PRO5 you have used here.
PS: I'm the author of TWRP port. It's almost working except some issues with decon framebuffer weirdness (you will notice some screen ui blinking and lags).
Original link to look for further updates: http://xep.8800.org/pro5/
PPS: Be aware of LOCKED BOOTLOADER if you flashing stock rom with this recovery! Replace original bootloader file first with unlocked one inside update.zip or remove bootloader flashing line from updater-script! If something goes wrong in this case there is a chance to get locked bl and non-functional recovery!
Click to expand...
Click to collapse
can you see #1 I write:+ support kernel with synapse tks to dev Russia
I did not create thread instruction recovery twrp , my topic only support rom
tks
First of all, thank you for your great work on the modification of this phone.
But I have a few questions about this rom:
1. Does it support fingerprint technology?
2. Is there any serious bug or loophole in this stock rom?
aegoyu said:
First of all, thank you for your great work on the modification of this phone.
But I have a few questions about this rom:
1. Does it support fingerprint technology?
2. Is there any serious bug or loophole in this stock rom?
Click to expand...
Click to collapse
fingerprint working fine
no bug , rom stable
29y6145 said:
Meizu pro 5 stock
Changelog:
+ Base meizu rom
+ original
+ No lost bootloader
+ support update no wipe data
+ support kernel with synapse tks to dev Russia
How to install
Step1: boot TWRP
Step2: 4wipe if you downgrade rom fw
Step3: install rom
Step4: reboot
Step5: If want root pls flash super SU and kernel mod
Note: IF use kernel pls, click setting/power management settings / power mode
Battery will very good
Link download all (TWRP,super su, rom,kernel)
Google driver
XDA:DevDB Information
Meizu pro 5 Stock original, ROM for the Meizu MX
Contributors
29y6145
ROM OS Version: Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.1.1
Version Information
Status: Beta
Stable Release Date: 2016-04-01
Beta Release Date: 2016-04-01
Created 2016-03-31
Last Updated 2016-03-31
Click to expand...
Click to collapse
I flash 5.6.4.5G.zip which you provide,and install your kernel,but serial number show me is ' unknown'
It happend to my own kernel build too,I don't know what's wrong.
Thanks~
zhouruixi said:
I flash 5.6.4.5G.zip which you provide,and install your kernel,but serial number show me is ' unknown'
It happend to my own kernel build too,I don't know what's wrong.
Thanks~
Click to expand...
Click to collapse
you flash rom 5.6.4.5G fix SN unknown
29y6145 said:
you flash rom 5.6.4.5G fix SN unknown
Click to expand...
Click to collapse
You mean I should flash 5.6.4.5G without your kernel?
Yes,I flash the kernel back and the SN is OK
I just want to know why how this problem occured
zhouruixi said:
You mean I should flash 5.6.4.5G without your kernel?
Yes,I flash the kernel back and the SN is OK
I just want to know why how this problem occured
Click to expand...
Click to collapse
because delete imei.dat
Gửi từ PRO 5 của tôi bằng cách sử dụng Tapatalk
Hello everybody !
I just have bought Meizu PRO 5 and I would like to know :
How to unlock bootloader ? (I would like to install CM12.1)
And how to go back at stock ROM ?
What is the difference between your 5.6.4.5G.zip and the original STOCK update ?
Thank you in advance
Hi,
So I have a VNS-L31 bought in France (Europe), not locked to a specific vendor for updates.
Actually I use LineageOS 14.1 self-built using a 3.10.x kernel (using Meticulus development files that I had to fork - like he removed his vendor repo and his latest commit in device repo is not buildable; see my Github repo and I don't give any rom or support for now).
I asked Huawei to get the kernel sources for the stock rom and I'd like to get the 4.x branch. The problem is they asked me a build number, but I flashed from Android 6 which uses 3.x, so I have no idea for what is this build number. I don't know what is the right build for EMUI 5 / Android 7 I could get/use. On the URL= http consumer huawei com /fr/support/mobile-phones/p9_lite_fr-sup htm ] official website [ /URL (in French) they do not offer a download option for this build (only Android 6 and a rollback package). And maybe this isn't even built using the 4.x branch?
And I don't know if I would get the same sources as in URL= https github com /OpenKirin/android_kernel_huawei_hi3650 ]this repo[ /URL.
Also, I'd like to know more of what's going on rom development for Android 7 (or 8). There do not seem that another LineageOS 14 port is going on, OpenKirin has only a recovery released as far as I know. Also, one or two other phones seem to use the same kernel, that are not other names for the P9 Lite, like the Honor 6X?
PS: I don't have any skill in rom porting, I sent a few emails to people that worked on this device, and I saw I'm really lacking of knowledge. Also, it would be one of my many side-projects.
Thanks for your help.
NEON KERNEL
Disclaimer:
Use this kernel at your own risk. Flashing it may brick your device. I'm not responsible for any software/hardware and any kind of damages/losses.
Changelog v1.01
Upstreamed To Latest CAF With Linux Stable Merged.
Full Nethunter Support.
Supports Internal Monitor Mode.
Lots Of Under The Hood Bug Fixes.
Download
Click Me
How to flash:
- reboot into recovery
- make a backup of your original boot.img
- flash zip
- flash magisk if needed
- wipe dalvik (mandatory!)
XDA:DevDB Information
Neon Kernel, Kernel for the Xiaomi Mi A3
Contributors
arunbiju969, paul89rulez
Source Code: [url]https://github.com/ArunBiju/Neon-Kernel[/url]
Version Information
Status: Stable
Current Stable Version: v1.01
Stable Release Date: 2020-09-01
Created 2020-08-31
Last Updated 2020-08-31
Reserved1
Reserved2
Hi,
1- Can you add patching kernel so flashing magisk is not necessary.
2- Can this kernel be used in Custom Roms?
3- Whats the point of this kernel battery,performance,balanced or only for Nethunter?
sasukeob said:
Hi,
1- Can you add patching kernel so flashing magisk is not necessary.
2- Can this kernel be used in Custom Roms?
3- Whats the point of this kernel battery,performance,balanced or only for Nethunter?
Click to expand...
Click to collapse
Patching is already present, this kernel was also tested on crDroid basically any rom with stock vendor and MIUI, Finally this kernel is made for balanced use with Good performance and Battery with the latest bug fixes from ALS and nethunter is bonus.
bad news for me. Because i have OSS vendor and Pixel Experience Rom. so i cant flash it.. Sad..
sasukeob said:
bad news for me. Because i have OSS vendor and Pixel Experience Rom. so i cant flash it.. Sad..
Click to expand...
Click to collapse
I am planning an OSS release.
if it has flashing kernel and magisk flashing not necessary again, and if it has for OSS vendor, i will definetly try this kernel
Does packet injection work to do Deauth attacks, I would like to do deauth attacks without the need for a wifi adapter, by the way does it support all kinds of wifi adapters?
Charly737 said:
Does packet injection work to do Deauth attacks, I would like to do deauth attacks without the need for a wifi adapter, by the way does it support all kinds of wifi adapters?
Click to expand...
Click to collapse
Internal packet injection is not present as of now and yes it supports all the adapter supported by Kali Nethunter.
Friend since I installed this kernel I cannot use my phone as a universal remote control every time I try it restarts my phone I checked it and it is the friend kernel.
Also quick bug report
Face unlock doesn't work with this kernel.
Don't use it that much so it's not a big deal for me but have since switched to a different oss ROM and never got a log of the issue, my apologies
arunbiju969 said:
Patching is already present, this kernel was also tested on crDroid basically any rom with stock vendor and MIUI, Finally this kernel is made for balanced use with Good performance and Battery with the latest bug fixes from ALS and nethunter is bonus.
Click to expand...
Click to collapse
Well this may sound stupid or dumb but i had to, so how was the battery backup on crDroid? because i am trying find a perfect kernel to get the best battery backup i could from a 4000 mah and i have the CrDroid.
thanks for making this ( THANKED )
Regards.
Are you guys using Kali Nethunter or X-Tools via Termux?
nice effort,
is it better than perf+?
Hello. I cannot start a covert attack with your kernel, that is, I connect the phone to the computer, click on Execute attack, for 1 second the inscription: attack launched appears, and then the inscription: attack execution appears
ended. Tested on Windows 10. Internal monitor mode works and duckHunter Hid works too. Firmware: android 10 stock
Hey, airmon-ng working??? I need this kernel to get wifi handshakes using built-in wifi, if its already working please let me know.
Charly737 said:
Friend since I installed this kernel I cannot use my phone as a universal remote control every time I try it restarts my phone I checked it and it is the friend kernel.
Click to expand...
Click to collapse
Which phone you have
Is for Stock a10 or A11?
Gauravnoob said:
Which phone you have
Click to expand...
Click to collapse
Mia A3 Android 11
This is the Nothing NetHunter 1 (R3) which is built for Android 12/13 (AOSP)
INSTALLATION
1 Install Paranoid Android Topaz from over here and setup the rom properly, install Magisk
and root the kernel/device.
2. Download / Install "FKM" kernel manager from Play Store
3. Open "FKM" and go to "FLASHER" and flash the kernel zip.
or even better add this JSON (FKM) link from the first option;
https://raw.githubusercontent.com/kimocoder/android_kernel_nothing_sm7325/wip/fkm/nothing.json
3.1 Download the flashable kernel zip directly for later or other types of AnyKernel3 flasher tools/apps;
https://raw.githubusercontent.com/kimocoder/android_kernel_nothing_sm7325/wip/fkm/R3.zip
SOURCES
CHANGELOG is available exactly here
KERNEL source is here
CONTACT
Twitter: kimocoder
GitHub: kimocoder
Reserved
not working on stock a13?
ayed78 said:
not working on stock a13?
Click to expand...
Click to collapse
The problem with stock the WiFi SoC is problematic, it works like on AOSP, but WiFi will not work. Only custom rooms at this point.
There seems to be an issue with being able to purchase fkm from Play as of now,any recommended alternatives?
X808x said:
There seems to be an issue with being able to purchase fkm from Play as of now,any recommended alternatives?
Click to expand...
Click to collapse
Kernel Manager
EX Kernel Manager is FREE and Open Source, may also be used for flashing, updating and backups.
Rolled a new kernel which includes/fixes;
* lined up to latest Topaz AOSP Beta 1
* imported latest linux-stable (v5.4.226)
* fixed touchscreen wake issue
Download links in first post ..
.. and will be released in updater tomorrow
Do you have oneplus8t kernel for android 13 with nethunter support?
kimocoder said:
Rolled a new kernel which includes/fixes;
* lined up to latest Topaz AOSP Beta 1
* imported latest linux-stable (v5.4.226)
* fixed touchscreen wake issue
Download links in first post ..
.. and will be released in updater tomorrow
Click to expand...
Click to collapse
only for custom rom paranoid?
Works for Evolution X ROM On Nothing phone
New kernel update coming up tomorrow
work for Topaz stable ?
Yes, kernel works with Nothing Stable.
kimocoder said:
Yes, kernel works with Nothing Stable.
Click to expand...
Click to collapse
I mean PA 13 ,
I see many changes in source , R5 soon ?
kimocoder said:
This is the Nothing NetHunter 1 (R3) which is built for Android 12/13 (AOSP)
INSTALLATION
1 Install Paranoid Android Topaz from over here and setup the rom properly, install Magisk
and root the kernel/device.
2. Download / Install "FKM" kernel manager from Play Store
3. Open "FKM" and go to "FLASHER" and flash the kernel zip.
or even better add this JSON (FKM) link from the first option;
https://raw.githubusercontent.com/kimocoder/android_kernel_nothing_sm7325/wip/fkm/nothing.json
3.1 Download the flashable kernel zip directly for later or other types of AnyKernel3 flasher tools/apps;
https://raw.githubusercontent.com/kimocoder/android_kernel_nothing_sm7325/wip/fkm/R3.zip
SOURCES
CHANGELOG is available exactly here
KERNEL source is here
CONTACT
Twitter: kimocoder
GitHub: kimocoder
Click to expand...
Click to collapse
Hey KimoCoder,
Big fan, followed your steps. Which Kali Nethunter module do I install in Magisk?
Regards,
TheBitJuggler
The one thing I'm struggling to get to work at the moment for this still is the USB Arsenal. Is this something I did wrong, or is it something that the Kernel needs to support?
Only works for Custom ROM or for Stock too?