Related
Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
King Canute said:
Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
Click to expand...
Click to collapse
Download the attached link. You find a folder of s4 root. Odin 1.85 and Cwm file and a rooting file(only if you need root)
An odin 1.85 specialy for gti 9505. Big thanks to chainfire.
Turn your phone in downloadmode. Connect your Phone to your pc. Open odin and select pda and select the file i9505-cwm-recovery -6.0.3.2-4
Start.
After the phone is rebooting, turn your phone off.
Then volume up,home button and powerbutton at the same time. When you see on top a blue text" recovery booting" let go of the 3 buttons and it boots in cwm. This should do the trick.
http://db.tt/BmvKeopK
Regards
Verstuurd van mijn GT-I9505 met Tapatalk
astraopcuser said:
Download the attached link. You find a folder of s4 root. Odin 1.85 and Cwm file and a rooting file(only if you need root)
An odin 1.85 specialy for gti 9505. Big thanks to chainfire.
Turn your phone in downloadmode. Connect your Phone to your pc. Open odin and select pda and select the file i9505-cwm-recovery -6.0.3.2-4
Start.
After the phone is rebooting, turn your phone off.
Then volume up,home button and powerbutton at the same time. When you see on top a blue text" recovery booting" let go of the 3 buttons and it boots in cwm. This should do the trick.
http://db.tt/BmvKeopK
Regards
Verstuurd van mijn GT-I9505 met Tapatalk
Click to expand...
Click to collapse
Thanks for trying to help me out, but still I got no luck with this,
After the flashing, when I try to go into recovery mode I can see that the phone tries to install or update something, but a sec after I get some sort of fail message and I'm back to default recovery mode.
I can't understand what seems to be the problem.
Could it be that my phone might be locked to a carrier?
King Canute said:
Thanks for trying to help me out, but still I got no luck with this,
After the flashing, when I try to go into recovery mode I can see that the phone tries to install or update something, but a sec after I get some sort of fail message and I'm back to default recovery mode.
I can't understand what seems to be the problem.
Could it be that my phone might be locked to a carrier?
Click to expand...
Click to collapse
Is your device rooted yet?
I first rooted my phone and then i flashed cwm recovery via odin 1.85. All in the file you've downloaded.
astraopcuser said:
Is your device rooted yet?
I first rooted my phone and then i flashed cwm recovery via odin 1.85. All in the file you've downloaded.
Click to expand...
Click to collapse
Do I have to root the phone to make the clockworkmod work?
King Canute said:
Do I have to root the phone to make the clockworkmod work?
Click to expand...
Click to collapse
you must first root your phone.:good:
---------- Post added at 10:54 PM ---------- Previous post was at 10:36 PM ----------
astraopcuser said:
you must first root your phone.:good:
Click to expand...
Click to collapse
for the gti 9505 lte is a little bit diverent at this time.
first flash the cf autorootjflte.... via odin. phone in downloadmode, select pda,select cf autoroot jfte... hit start. phone reboots, you see an red/orange android droid then its rebooting
after that turn off your phone . phone in downloadmode, open odin, select pda, select cwm 6.0.3.2-4, hit start
Your phone is rooted with cwm.
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Obagleyfreer said:
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Click to expand...
Click to collapse
How rubbish..... its goes that way to get a custom cwm on the gti9505.
He ask cwm, not philz recovery.
You can say next time ....theres another way to get it work.
I only trying to help
Verstuurd van mijn GT-I9505 met Tapatalk
This version of CWM work perfect and supports exFat (64GB SD Cards).
You don't need root.
Flash as PDA using Odin PC.
http://forum.xda-developers.com/showthread.php?t=2279579
Obagleyfreer said:
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Click to expand...
Click to collapse
I'm 100% sure that my phone is a 9505, it's the only version sold in Norway.
Mittaa said:
This version of CWM work perfect and supports exFat (64GB SD Cards).
You don't need root.
Flash as PDA using Odin PC.
http://forum.xda-developers.com/showthread.php?t=2279579
Click to expand...
Click to collapse
It's this version I'm trying to flash with no luck, and I can't understand why it's not working.
Maybe I have to do a factory reset, or flash a complete new stock ROM?
King Canute said:
It's this version I'm trying to flash with no luck, and I can't understand why it's not working.
Maybe I have to do a factory reset, or flash a complete new stock ROM?
Click to expand...
Click to collapse
Do you have a proper USB connection between Odin PC and your phone?
Try another USB cable or/and another USB port ...
Did you remember to kill all KIES processes running in background?
CTRL, ALT, DELETE running processes ...
King Canute said:
Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
Click to expand...
Click to collapse
in some stock firmwares, when you boot the phone, the stock recovery is re-writing over the flashed custom one:
root your phone, and with a root explorer go to system, delete "recovery-from-boot.p" or rename it to "recovery-from-boot.p.bak"
then go to system/etc, delete this file: "install-recovery.sh" or rename it to "install-recovery.sh.bak.
now you can flash your custom recovery.
Mittaa said:
Do you have a proper USB connection between Odin PC and your phone?
Try another USB cable or/and another USB port ...
Did you remember to kill all KIES processes running in background?
CTRL, ALT, DELETE running processes ...
Click to expand...
Click to collapse
I'm using an Samsung retail cable from the S2, but I did try with the S4 retail cable aswell, but still no luck. The flashing goes ok in Odin, so I doubt the cable is the problem. And Kies isn't running in the background at all. Even changed USB port just to be sure testing all the options.
samersh72 said:
in some stock firmwares, when you boot the phone, the stock recovery is re-writing over the flashed custom one:
root your phone, and with a root explorer go to system, delete "recovery-from-boot.p" or rename it to "recovery-from-boot.p.bak"
then go to system/etc, delete this file: "install-recovery.sh" or rename it to "install-recovery.sh.bak.
now you can flash your custom recovery.
Click to expand...
Click to collapse
Ok, so I might have to root my phone and try this out then.. I was hoping to avoid rooting for now.
And the way to root is done using Odin as described in an earlier post?
Will it be possible to reset the counter later on if I need to go back to stock ROM if the phone should need to sendt to service etc? I know it is possible to reset the counter on S3.
King Canute said:
Ok, so I might have to root my phone and try this out then.. I was hoping to avoid rooting for now.
And the way to root is done using Odin as described in an earlier post?
Will it be possible to reset the counter later on if I need to go back to stock ROM if the phone should need to sendt to service etc? I know it is possible to reset the counter on S3.
Click to expand...
Click to collapse
if you want to be sure, flash custom recovery, do not check "auto-reboot" or when it says "pass" unplug and take off the battery, then reinsert it, boot straight to recovery so you should see the custom recovery. but once you reboot the phone the stock recovery will be back .
any way, you can root in any method you want.
why you want to flash custom recovery without rooting??
once you flashed anything unofficial with odin, the counter is triggered.
yes you can reset it with triangle away.
samersh72 said:
if you want to be sure, flash custom recovery, do not check "auto-reboot" or when it says "pass" unplug and take off the battery, then reinsert it, boot straight to recovery so you should see the custom recovery. but once you reboot the phone the stock recovery will be back .
any way, you can root in any method you want.
why you want to flash custom recovery without rooting??
once you flashed anything unofficial with odin, the counter is triggered.
yes you can reset it with triangle away.
Click to expand...
Click to collapse
Ok I tried to flash the clockworkmod without checking the auto-reboot and it worked like you said.
The reason I don't want to root the phone is, because I actually don't need it, never had any use of it on other phones.
Ok then I have to root it like you said to make i work properly.
King Canute said:
Ok I tried to flash the clockworkmod without checking the auto-reboot and it worked like you said.
The reason I don't want to root the phone is, because I actually don't need it, never had any use of it on other phones.
Ok then I have to root it like you said to make i work properly.
Click to expand...
Click to collapse
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
samersh72 said:
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
Click to expand...
Click to collapse
I was thinking about installing Cyanogenmod ROM or maybe later Google Android 4.3.
So now I need to root the phone.
samersh72 said:
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
Click to expand...
Click to collapse
Triangle Away wan't work if you have custom kernel OR recovery !
Mittaa said:
Triangle Away wan't work if you have custom kernel OR recovery !
Click to expand...
Click to collapse
yes i know and he supposed to read or already red TA thread to know that
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
There is a script in official firmware that checks for official recovery and if it finds a custom one it tries to overwrite with official one. If i remember correct it's called install-recovery. sh
PhilZ recovery handles it automatically.
It's impossibe to flash anything other than the leaked 4.4.2 stock because you flashed your bootloader to kitkat, no you MUST stay on sammy 4.4.2 till the devs found a solution for this. Thats why you have to read carefully be4 you flash.
silentvisitor said:
There is a script in official firmware that checks for official recovery and if it finds a custom one it tries to overwrite with official one. If i remember correct it's called install-recovery. sh
PhilZ recovery handles it automatically.
Click to expand...
Click to collapse
No luck!
I tried PhilZ recovery from the below link.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltexx
What are my other options?
sid8907 said:
No luck!
I tried PhilZ recovery from the below link.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltexx
What are my other options?
Click to expand...
Click to collapse
This one seems to be the only one working with 4.4.2 right now.
Possible solution
The way I can suggest is to create a little update.zip file with little updater-script to remove install-recovery.sh file from device (just one line needed).
Ok, I found a zip which I am attaching below. You(or anyone) may review the script before flashing.
Place this on your external (or internal) sdcard.
In ODIN don't check Auto reboot
Flash Recovery. Remove phone when it says PASS.
Remove battery. Start in Recovery mode by pressing buttons.
You should now be in new Recovery.
Flash that zip file.
Reboot.
You should be good.
The Auto Reboot for some reason is faded out. Tried different versions of Odin and also tried to open it with the phone connected/disconnected.
I am out of ideas.
I would suggest you to wait for someone to come up with working solution. Being too adventurous with ODIN could brick your device.
sid8907 said:
The Auto Reboot for some reason is faded out. Tried different versions of Odin and also tried to open it with the phone connected/disconnected.
Click to expand...
Click to collapse
Clear out all your ODIN caches etc, delete all files and keep 1.85.
Flash this (only working recovery on 4.4.2) via PDA in ODIN, If it doesn't reboot auto after saying PASS or RESET.. just turn phone off, reboot into recovery and it'll be fine.
EDIT: Just re-read, Re flash your Stock 4.4.2 (Use XEO not the leaked one!) and then start again
Thanks!
Maybe a little off topic, but is there a way to install CM11 on Stock 4.4.2 on the Note 3?
I've been reading Samsung is out with a new bootloader so there is no way round this?
radicalisto said:
Clear out all your ODIN caches etc, delete all files and keep 1.85.
Flash this (only working recovery on 4.4.2) via PDA in ODIN, If it doesn't reboot auto after saying PASS or RESET.. just turn phone off, reboot into recovery and it'll be fine.
EDIT: Just re-read, Re flash your Stock 4.4.2 (Use XEO not the leaked one!) and then start again
Click to expand...
Click to collapse
Thanks!!
sid8907 said:
Thanks!
Maybe a little off topic, but is there a way to install CM11 on Stock 4.4.2 on the Note 3?
I've been reading Samsung is out with a new bootloader so there is no way round this?
Click to expand...
Click to collapse
You may have to do a little reading but I believe CM11 is now working on the KK bootloader...
sid8907 said:
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
Click to expand...
Click to collapse
here's the link for twrp for ya'll http://forum.xda-developers.com/showpost.php?p=50333147&postcount=398
sid8907 said:
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
Click to expand...
Click to collapse
jp.26 said:
here's the link for twrp for ya'll http://forum.xda-developers.com/showpost.php?p=50333147&postcount=398
Click to expand...
Click to collapse
so.... yeah i just updated my bootloader to 4.4.2 and this drove me literally insane. ive been working on it for 4 hours now. i encountered so many problems with installing the bootloader. exact same problem as SID8907. i gotta tell you tho.... you worked some magic my friend. i tried almost everything. then i came across your link. i was like why not? so i flashed the img in odin..... anddddd :drumroll pleaseeeeee:: IT WORKED. ahhh....... so much frustration and the problem is solved!!! thank you so much JP.26 :good::laugh:
is there any word on how to fix this been looking for hours tmobile note beast dont want to put any roots down on my phone before i find a way to flash cm or a non bloated note rom would be nice.
I'll that I've managed is to root and flash twrp I found a way to turn cwm recovery into a tar file and flash through odin. But i just get into a boot loop with cwm due to the boot loader I presume but tarp works fine I just can't flash cm11. I get boot loop every time
Sent from my SM-N900T using XDA Premium 4 mobile app
im sorry but im confused here... does this all simply mean that there is not yet a working cwm for 4.4.2 yet? and that while we can root, there is no working recovery for this version?
I'm not sure myself tarp works but I can't flash cm11
Sent from my SM-N900T using Tapatalk
Phillz cwm Dev edition I think that's the name works its a themed touch cwm. This works great but still can't flash cm so gayyyy
Sent from my SM-N900T using Tapatalk
I was wondering what happened to the cmw too.
The modded cmw by Chenglu is the only one working that I know of.
Link to thread: http://forum.xda-developers.com/showthread.php?t=2454079
Hello,
I am facing weird problem, I am not able to install custom recovery, I have tried almost everything.. nothing helped.
I am still getting stock recovery..I have tried to flash it via Odin, via some apps, unfortunatelly nothing worked.
My Samsung Galaxy S4 i9505 is running KK 4.4.2.
Any idea?
Thank you.
I had this problem too. keep flashing cwm recovery through the app (needs root I think). and reboot into recovery, once you get cwm you can flash a custom rom or another recovery like twpr or philz.
s4 i9505 stock KK
I have that problem too. I have stock KK 4.4.2 XXUGNG8 updatet ota. When i try to flash flashable zip file cwm of philz or twpr i get some error like:
E:footer bad
Mds check
Something like that and cant flash it. I tryed with odin but no luck. Does anyone have same problem?
I had this problem to
I fixed it by checking te root options.
If u use a root app, make sure it gives always root acces.
After this, install a custom recovery rom
After that you'll have no problem installing a custom ROM
Good luck.
Xehk said:
I had this problem to
I fixed it by checking te root options.
If u use a root app, make sure it gives always root acces.
After this, install a custom recovery rom
After that you'll have no problem installing a custom ROM
Good luck.
Click to expand...
Click to collapse
But my phone is not rooted, its new, with stock recovery, knox 0x0 still....
Have any idea?
Ok, but what if my phone is not rooted, how am I supposed to root it? When I tried CF-Auto-Root my phone started to reboot randomly during the phone call.
I have found one solution, but I am not sure if it works, it says that if you are flashing custom recovery via odin, you have to take out the battery after the flash is done so you won't allow your phone to restart and rewrite the recovery back to stock. Have anyone heard about it?
No, no idea.
Thats crappy.
Only know how I fixed it
icefun said:
I have found one solution, but I am not sure if it works, it says that if you are flashing custom recovery via odin, you have to take out the battery after the flash is done so you won't allow your phone to restart and rewrite the recovery back to stock. Have anyone heard about it?
Click to expand...
Click to collapse
Just uncheck auto-reboot before you flash the recovery. That will fix your problem.
I have tried it, but it didn't help still looking for solution, is there any way how to RENAME RECOVERY RESTORE FILES so I can finally flash custom recovery? (non-rooted phone)
OK, so the solution that worked was simple and I have already mentioned it, you have to take out you battery on samsung galaxy s4 logo, before it reboots.
My solution
Hi I had the same problem too,
I solved it this way: (My phone was rooted)
Download the .zip file from the recovery you want (I used CWM 6.0.4.7)
Next download 'SGS4 flasher' from the playstore.
SGS4 flasher needs root (I think) andyou can flash your recovery through that app.
Next boot into the recovery and you should probably end up in your custom revovery every time now.
If you don't end up in your custom recovery, download ROM manager and then choose the option boot into recovery.
This worked for me at least :laugh:
New to the S4 - did a search and could not find a similar problem as mine...
My friend gave me his S4 and told me it is rooted - which it is. However, there seems to be no recovery on the phone. When I try power-vol up-home, I get the blue recovery note at the top, but then the phone just continues to boot into the system (MF9). I used Odin to go back to stock and then attempted to boot into recovery - no luck. I rooted the phone again via CF Auto Root and tried to install a custom recovery via Odin and TWRP Manager - still no luck. Anyone have any ideas/suggestions? I appreciate the help.
Bumping this up to the top for one more run through...thanks everyone.
Sixbowmans said:
Bumping this up to the top for one more run through...thanks everyone.
Click to expand...
Click to collapse
Maybe go in to Odin mode and flash latest stock making sure to unchecked the auto reboot option. When it finishes flashing unplug and pull the battery, let it boot it'll take a while (took mine about 10-15 minutes). You'll then be on latest stock with latest bootloader and recovery. From there you can go back to Odin mode and flash TWRP. Once again making sure to not auto reboot.
Just to be safe back up apps and msic and picture etc on samsung kies and then do a full recovery delete everything and install the latest firmware then try cf auto root again or if you have trouble with that rhen use kingoroot and then flash twrp or phils recovory and get a rom. If that doesnt work just get cyanogenmod installer which installs root and a stock rom.
Sent from my SM-N910V using XDA Free mobile app
mattzeller said:
Maybe go in to Odin mode and flash latest stock making sure to unchecked the auto reboot option. When it finishes flashing unplug and pull the battery, let it boot it'll take a while (took mine about 10-15 minutes). You'll then be on latest stock with latest bootloader and recovery. From there you can go back to Odin mode and flash TWRP. Once again making sure to not auto reboot.
Click to expand...
Click to collapse
Thanks mattzeller. Your suggestion took me back to my Evo days. I took out the sd card, flashed with Odin, pulled the battery, rebooted the system, and then was also able to boot into recovery.
Good afternoon guys,
i have a big issue with my galaxy s5 SM-G900S (korean version). I bought it as a refurbished device. Knox was on 0x1 so something may have been modified.
It came with the stock (?!) android 4.4.2 from march14. I tried to update but it returned a registration error. Probably because knox is 0x1
In any case, I activated usb debugging and tried to root the phone using cfautoroot and the corresponding root file: CF-Auto-Root-klteskt-klteskt-smg900s.zip which I still assume to be the correct one.
I used odin for flashing. The device was properly connected (blue).
Everything seemed to go smooth until the phone restart when it said "recovery is not seandroid enforcing". I tried several times with both odin 3.07 and 3.09 but i cannot pass this step. I also tried the method to untick auto reboot, shut the phone down manually and boot into recovery mode but it failed.
This means I am now stuck in the bootloop. I can access download mode, but i cannot reach recovery mode. Also the phone is not recognized by the computer if i try to connect it to adb, kies etc. Odin seems to connect properly still.
Alright how should i proceed now?? My actual target is to flash a custom rom. I will need to go for a dirty flash now correct? Should I flash a stock rom with odin? If yes, which one?
Please support me a bit, I am very frustrated on this topic, especially cause I still dont realize my mistake......
Merry Christmas and greets from Bavaria, Germany.
cheeet
Flash the stock firmware to get out of boot loop. After flashing the stock firmware, everything should be working fine and booting again. Instead of using CF auto root, flash a custom recovery like TWRP and then use it to flash the SuperSU zip.
toxious651 said:
Flash the stock firmware to get out of boot loop. After flashing the stock firmware, everything should be working fine and booting again. Instead of using CF auto root, flash a custom recovery like TWRP and then use it to flash the SuperSU zip.
Click to expand...
Click to collapse
Alright, Im back to stock android 4.4.2 now. Works perfect, aside from registration. If I click on "update now" it shows: SKT-USIM required.
Can someone link a detailed guide for flashing cm13? I checked the web but i still dont entirely understand.
In any case I do not want to risk going into a tricky situation once more.....
Thanks in advance.
Greets, cheet