LG G Flex Split View - G Pad 8.3 General

Since a lot of the G2 mods work this port may work with the G Pad:
http://forum.xda-developers.com/showthread.php?t=2544206
Anyone want to test it out? It will give you samsung-like slit view with apps. I am tempted to test it out now that I have a Nandroid back up with TWRP but I am at work and don't have time to mess with my device if it goes south

Won't launch. I didn't have time to pull a logcat or pull apart the zip to see if I could get it to work. May try more later.
Flashing the zip did *not* put me in a bootloop. Your results may vary
Support your Devs......

Try using my xposed module to launch it.
Maybe it would work?

BlackDino said:
Try using my xposed module to launch it.
Maybe it would work?
Click to expand...
Click to collapse
That's what I did. :-/
Support your Devs......

Didn't work for me. Flashed it but then splitview FC again and again and you can't do anything... Had to reflash stock to get rid of it.

Anyone found a possible fix for this or baked into a rom? I have this on my G2 and love it. I want mahdi rom or cm11 with this.

any news here?

this could be very interesting and much more useful in tablets than in phones. I hope someday it works on our devices.

Related

[Q] Help-Darktremors Apps2SD

Hello, I am currently using Quantum Rom 2.0 but I switch all the time. I have flashed the dt a2sd and when I try to run it, it always fails. After searching the actual thread about this I see that some mods have to be done to the kernel to get it to work on Epic 4g. Also I see that the creator of ViperRom has gotten it to work. Can anyone explain to me what needs to be done to enable this to run on mine, and any rom? What needs to be there/changed/ and how? Thank you
johnyardavid said:
Hello, I am currently using Quantum Rom 2.0 but I switch all the time. I have flashed the dt a2sd and when I try to run it, it always fails. After searching the actual thread about this I see that some mods have to be done to the kernel to get it to work on Epic 4g. Also I see that the creator of ViperRom has gotten it to work. Can anyone explain to me what needs to be done to enable this to run on mine, and any rom? What needs to be there/changed/ and how? Thank you
Click to expand...
Click to collapse
I'm not certain that it works properly on ViperRom. I and a couple others were not able to run it properly, but for some reason could not get any answers in the thread. I don't think anyone has it properly implemented in their Froyo roms yet.
odub303 said:
I'm not certain that it works properly on ViperRom. I and a couple others were not able to run it properly, but for some reason could not get any answers in the thread. I don't think anyone has it properly implemented in their Froyo roms yet.
Click to expand...
Click to collapse
Boo, lol 10char

New CM9 Nightly Builds for TF101

Hello people,
I was looking through the nightly builds on download.cyanogenmod.com
I saw a fresh build for TF101 dated for 2/27.
Check it out. I will flash it and see how it is.
Someone also needs to create an Official CM9 Nightly page in Dev section.
So who wants to be the Guinea pig? I'm already running that KANG that was posted up earlier this weekend. I may try it after I charge up.
yea...guinea pig here....goes through boot animation and then system ui and trebuchet (the launcher) fc...i would say stay away until some official announcement is made
Yeah. It doesn't even boot up probably. :-(... going back to stock
Sent from my Galaxy Nexus using XDA App
You have to start somewhere.
Now at least we have an official CM9 branch, which means someone is working on it
brzgw said:
Hello people,
I was looking through the nightly builds on download.cyanogenmod.com
I saw a fresh build for TF101 dated for 2/27.
Check it out. I will flash it and see how it is.
Someone also needs to create an Official CM9 Nightly page in Dev section.
Click to expand...
Click to collapse
ehm where from?
Edit: http://download.cyanogenmod.com/?device=tf101
Found IT ^_^
I got launcher force closes when i had an overclocked kernel with a stock rom. Gonna check this out a little later.
Sent from my Transformer TF101 using Tapatalk
I'm surprised that this news seems to be not generating much buzz here. Not knocking any of the other devs, because most of them do amazing work, but CM is the bee's knees. When those nightlies get semi-mature, I'll be running them and never look back. They've never done me wrong before. Any device I've ever had that was supported, was the best ROM available for my needs. YMMV, of course.
I think when its own thread is created youll see the buzz, cm rocks lol
Sent from my R800i using xda premium
I tried flashing it and got the same fc, the system ui and launcher. I tried it again but formatted system this time. Got the same results but was able to see the clock and tablet reboot options.
Guess it's not ready yet
shadrach47 said:
I tried flashing it and got the same fc, the system ui and launcher. I tried it again but formatted system this time. Got the same results but was able to see the clock and tablet reboot options.
Guess it's not ready yet
Click to expand...
Click to collapse
Yep, same here, even with wipe dalvik and fix permissions, FC´s :S
Let us wait for a new update....
Alas, I ran across this on get.cm also. Got excited and then had the FC issues like everyone else. At least it is a step in the right direction.
Don´t know if its related,
lost my wifi hability after trying this, anyone else?
it just won´t turn on :S
Was just about to try flashing it until I saw how many people were unsuccessful. Oh well, guess I'll wait until an official release.
ferreinf said:
Don´t know if its related,
lost my wifi hability after trying this, anyone else?
it just won´t turn on :S
Click to expand...
Click to collapse
Not sure if it's related or not but my wifi on a Kanged version of CM9 is acting weird, disconnecting and saying out of range.
I tried this one first but it could just be the ROM I'm on.
shadrach47 said:
Not sure if it's related or not but my wifi on a Kanged version of CM9 is acting weird, disconnecting and saying out of range.
I tried this one first but it could just be the ROM I'm on.
Click to expand...
Click to collapse
Ok got it to work again, had to use Super Wipe Lite from http://forum.xda-developers.com/showthread.php?t=1245892
after running the script flashed latest revolver and got wifi backup....
Same here, will try your suggestion below.
Edit: Had to run the wipe zip, reflash and boot into current rom and the restore a backup to get it working again. PITA But it works.
ferreinf said:
Don´t know if its related,
lost my wifi hability after trying this, anyone else?
it just won´t turn on :S
Click to expand...
Click to collapse
CM rocks
lollazzo said:
CM rocks
Click to expand...
Click to collapse
i would like to see MIUI V4 on tab, as it will be easier to port than 2.x was ^_^
New official CM9 nightly on get.cm. It boots!!! Gonna test it and report back in a bit.
EDIT1: Wifi works and was able to log into my Google account. Currently restoring my Titanium Backup and will test a bit more after that. Also, camera makes the tablet reboot on first launch, but works after that. Odd. More info to come.
EDIT2: Face unlock is there, but doesn't recognize my face, so I can't test it out. It couldn't recognize my face on my Nexus S 4G either. Maybe my face is just derped up. Anyway, there is nothing that I could tell that is broken. Even the MicroSD mounted with no issue. I don't have a keyboard dock to test it out, otherwise I would. Games and videos both work fine.

[Req.] Galaxy S4 Camera apk

Can anyone please upload the TW camera apk?
I am also looking for the gs4 camera apk. Please let me know when you find a link.
Stock Samsung GS4 camera app.
Having trouble with XDA so can't upload. Snag it from my Dropbox: **Link active for 3 days....no thanks=no extended host. **
CCallahan said:
Stock Samsung GS4 camera app.
Having trouble with XDA so can't upload. Snag it from my Dropbox: Samsung_Camera 2.zip (Not a flashable file)
Click to expand...
Click to collapse
If I am running slim bean how to I make this my camera?
Floppy454 said:
If I am running slim bean how to I make this my camera?
Click to expand...
Click to collapse
Not specific to slim bean, but there are a few things you have to check:
1. Is your ROM odex or deodex. The camera here is the odex version.
2. I think you will have a lot of FC trying some of the features unless you also grab seccamera.jar from the framework.
3. Many times the camera is also tied to the gallery, so you may also need that apk (and all associated files)
If you still want to try to install this and see what happens, you need to open the zip and use a root explorer app to put the two files in the system/app folder. You may also need to fix the permissions after copying. After that, restart the phone and see if it works.
EDIT:
Even with all the extra files I can't get it to work, there are probably other modifications that need to happen before it would work on a different system.
There are quite a few libraries needed (18 libarc*.so and at least 10 others), so it's not an easy port.
tsachi said:
Not specific to slim bean, but there are a few things you have to check:
1. Is your ROM odex or deodex. The camera here is the odex version.
2. I think you will have a lot of FC trying some of the features unless you also grab seccamera.jar from the framework.
3. Many times the camera is also tied to the gallery, so you may also need that apk (and all associated files)
If you still want to try to install this and see what happens, you need to open the zip and use a root explorer app to put the two files in the system/app folder. You may also need to fix the permissions after copying. After that, restart the phone and see if it works.
EDIT:
Even with all the extra files I can't get it to work, there are probably other modifications that need to happen before it would work on a different system.
There are quite a few libraries needed (18 libarc*.so and at least 10 others), so it's not an easy port.
Click to expand...
Click to collapse
any chance someone can upload this zip as i too seem to have misplaced my camera
CCallahan said:
Stock Samsung GS4 camera app.
Having trouble with XDA so can't upload. Snag it from my Dropbox: **Link active for 3 days....no thanks=no extended host. **
Click to expand...
Click to collapse
I'd really appreciate a repost of the link!!
So, no one who has the apk for s4 camera yet? I'm on a aosp based rom, but the only "Sammy - feature" I miss is the camera.
Also I have the i9505. Anyone who knows if I can use camera apk. from other s4 models?
Thanks in advance.
http://db.tt/QVthAzLO
Link just to the galaxy s4 camera.apk on i9505.
Sent from my GT-I9505 using xda app-developers app
benbird7 said:
http://db.tt/QVthAzLO
Link just to the galaxy s4 camera apk? on i9505.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the link!
Can't get it to work though, maybe it has to be a Sammy based rom?
Was kinda hoping I could port it to aosp.
Rydder said:
Thanks for the link!
Can't get it to work though, maybe it has to be a Sammy based rom?
Was kinda hoping I could port it to aosp.
Click to expand...
Click to collapse
The camera (as well as a number of other features such as IR Blaster, temp/humid sensors, etc.) require the touchwiz framework in order to work. This means that they will not work on ANY AOSP roms. This includes, AOKP, CM, Slimbean, etc. They will only work on roms that run a touchwiz framework.
As far as porting goes, it would require a ton of modifications require access to drivers and libraries which samsung has not made available in order to complete a port. Nothing is impossible so I won't go as far as saying it won't be done, but it will be extremely difficult and time consuming so many developers have been discouraged from even attempting this. Only time will tell if we'll ever get these things ported.
Thanks for sharing the your info on this, I won't be sitting around waiting for a port sometime soon then!
bacon_n_icecream said:
The camera (as well as a number of other features such as IR Blaster, temp/humid sensors, etc.) require the touchwiz framework in order to work. This means that they will not work on ANY AOSP roms. This includes, AOKP, CM, Slimbean, etc. They will only work on roms that run a touchwiz framework.
As far as porting goes, it would require a ton of modifications require access to drivers and libraries which samsung has not made available in order to complete a port. Nothing is impossible so I won't go as far as saying it won't be done, but it will be extremely difficult and time consuming so many developers have been discouraged from even attempting this. Only time will tell if we'll ever get these things ported.
Click to expand...
Click to collapse
hello , so this apk file have the same features like the s4 camera on a touchwiz framwork??
bacon_n_icecream said:
The camera (as well as a number of other features such as IR Blaster, temp/humid sensors, etc.) require the touchwiz framework in order to work. This means that they will not work on ANY AOSP roms. This includes, AOKP, CM, Slimbean, etc. They will only work on roms that run a touchwiz framework.
As far as porting goes, it would require a ton of modifications require access to drivers and libraries which samsung has not made available in order to complete a port. Nothing is impossible so I won't go as far as saying it won't be done, but it will be extremely difficult and time consuming so many developers have been discouraged from even attempting this. Only time will tell if we'll ever get these things ported.
Click to expand...
Click to collapse
I was hoping the Google Edition would have the Samsung features built in, but I guess not.
PwnCloud said:
I was hoping the Google Edition would have the Samsung features built in, but I guess not.
Click to expand...
Click to collapse
I wonder if anyone tried the camera yet on a Google Edition rom? I might give it an attempt later and see what happens.
CatFood said:
I wonder if anyone tried the camera yet on a Google Edition rom? I might give it an attempt later and see what happens.
Click to expand...
Click to collapse
It is ok, but the Samsung Camera app is way better.
A massive pity really... I may dump Google Edition, or perhaps find a 3rd party camera that can do the Picture-In-Picture feature.... which I love.
bacon_n_icecream said:
The camera (as well as a number of other features such as IR Blaster, temp/humid sensors, etc.) require the touchwiz framework in order to work. This means that they will not work on ANY AOSP roms. This includes, AOKP, CM, Slimbean, etc. They will only work on roms that run a touchwiz framework.
As far as porting goes, it would require a ton of modifications require access to drivers and libraries which samsung has not made available in order to complete a port. Nothing is impossible so I won't go as far as saying it won't be done, but it will be extremely difficult and time consuming so many developers have been discouraged from even attempting this. Only time will tell if we'll ever get these things ported.
Click to expand...
Click to collapse
Hey guys. You are not right. The temp and humid sensor will also work on AOSP Roms. Search for WeatherStation.apk It worked all fine by me
Oh and I use CM10.1^^
help
Is it possible to install on PAC 23.0.0 rom?
Galaxy s4 stock android edition 4.2.2
Nop it docent work the camera apk so sad :/// i have another problem i connect my phone to my laptop windows 8 it fines the device buy i can see anywhere the sd or internal memmorie any solution out their ?
when im on stock Samsung rom i have no problem of the above ty in advance!
CCallahan said:
Stock Samsung GS4 camera app.
Having trouble with XDA so can't upload. Snag it from my Dropbox: **Link active for 3 days....no thanks=no extended host. **
Click to expand...
Click to collapse
Hiii can i grt the app i searched alot for it really alot i have s4 i9500 but i flash it with slimkat rom and i miss the stock app

Custom Rom Lenovo S6000

Hey guys,
can you say me if there will be custom roms for this tablet in the future?
would be very nice, cause i love flashing all my devices
I would like to know too. Lenovo has crippled this version of Android.
willgreg21 said:
I would like to know too. Lenovo has crippled this version of Android.
Click to expand...
Click to collapse
They absolutely have. I was able to "semi-root" with framaroot, so thankfully su is added BUT I still can't uninstall bloatware...although there isn't much it still bugs me. full root and ROM still needed.
Custom ROM for S6000 would be very nice. Searching for it every day.
KitKat
Hopefully someone will add a KitKat ROM when possible, don't see lenovo upgrading us to it when it becomes available. Don't think the tablet is popular enough unfortunately though.
Just use titanium back up to remove bloat.... Work great for me
Sent from my IdeaTab S6000-F using xda app-developers app
Yea, I wish there was a custom ROM too. I just got my S6000-H yesterday, rooted it right away and used TiBu to remove some of the bloatware (I froze some more that I wasn't sure of). But it's missing simple things I'm used to from my N7000, like the advanced options in the shutdown menu.
I read in another thread that we do have a type of recovery built in - could someone tell me where to find it?
Never mind, found it ... and finally installed CWM today too. Now all I need is a nice custom ROM, but it doesn't look like any devs have that tablet
Use xposed to add modules. .. reboot, multi Window, floating, etc...etc... my S6000 tab works great. .. Still not good as my note 3 but...almost! My wife is jealous of all my tab can do... She think it stock that way. .. And her weird little Ellipses 7 Verizon gave hercan't do half of it. ... Guess I'll have to pimp her tab up for her! ! Look up x posed installer on xda, or Google it, then just follow where it leads. ... Easy
Sent from my SM-N900V using Tapatalk
Nimueh said:
Yea, I wish there was a custom ROM too. I just got my S6000-H yesterday, rooted it right away and used TiBu to remove some of the bloatware (I froze some more that I wasn't sure of). But it's missing simple things I'm used to from my N7000, like the advanced options in the shutdown menu.
I read in another thread that we do have a type of recovery built in - could someone tell me where to find it?
Never mind, found it ... and finally installed CWM today too. Now all I need is a nice custom ROM, but it doesn't look like any devs have that tablet
Click to expand...
Click to collapse
please a link for working CWM for b6000 h (3g) Thank you!
criszz said:
please a link for working CWM for b6000 h (3g) Thank you!
Click to expand...
Click to collapse
If you mean S6000-H then it's http://forum.xda-developers.com/showpost.php?p=44660171&postcount=417
I followed that step by step and it worked flawlessly
sorry my mistake , mean lenovo yoga tablet 8' b6000, sorry again , i was in a hurry, im wonder if that tool will work for me also, i'm afarid of briking
mpdayii said:
Use xposed to add modules. .. reboot, multi Window, floating, etc...etc... my S6000 tab works great. .. Still not good as my note 3 but...almost! My wife is jealous of all my tab can do... She think it stock that way. .. And her weird little Ellipses 7 Verizon gave hercan't do half of it. ... Guess I'll have to pimp her tab up for her! ! Look up x posed installer on xda, or Google it, then just follow where it leads. ... Easy
Click to expand...
Click to collapse
Thanks for that tip ... I just installed xposed and 3 modules, going to have a look through that huge list these days to see if I find more.
I installed the one to show the temperature in the status bar, the advanced reboot one and the one that shows RAM used/free in the task switcher. Pretty neat so far - if you know of any other "must-have" modules feel free to let me know
And sorry criszz, but no idea if that'll work on your tablet too
Nimueh said:
Thanks for that tip ... I just installed xposed and 3 modules, going to have a look through that huge list these days to see if I find more.
I installed the one to show the temperature in the status bar, the advanced reboot one and the one that shows RAM used/free in the task switcher. Pretty neat so far - if you know of any other "must-have" modules feel free to let me know
And sorry criszz, but no idea if that'll work on your tablet too
Click to expand...
Click to collapse
for xposed module i use a must have module : Gravity box and Boot manager
I installed Advanced Power Menu ... but Gravity Box I'm not sure about, way too much stuff in there I'll probably never need
I came across this:
http://lenovokitkatrom.blogspot.com/2013/09/upgradeupdate-ideatab-s6000-to-44-kitkat.html
Anyone have a look here? I'm usually sceptical of something not on XDA.
PRGS3 said:
I came across this:
http://lenovokitkatrom.blogspot.com/2013/09/upgradeupdate-ideatab-s6000-to-44-kitkat.html
Anyone have a look here? I'm usually sceptical of something not on XDA.
Click to expand...
Click to collapse
Blog was closed but I think you meant these: http://lenovoideatabs6000442kitkatrom.blogspot.de/ !?
I thinks this is a fake because as I know Mediatek chipsets aren't running on 4.4
But maybe this news can let us hope: http://news.softpedia.com/news/Medi...Coming-to-Tablets-by-Month-s-End-436176.shtml
schubi82 said:
Blog was closed but I think you meant these: http://lenovoideatabs6000442kitkatrom.blogspot.de/ !?
I thinks this is a fake because as I know Mediatek chipsets aren't running on 4.4
But maybe this news can let us hope: http://news.softpedia.com/news/Medi...Coming-to-Tablets-by-Month-s-End-436176.shtml
Click to expand...
Click to collapse
Thanks for that update!
I won't hold my breath for anything official seeing as Lenovo didn't even bump up to 4.3,
and zero ROMS out there? Or am I rubbish at searching?
I read in an other Forum that there is no Custom ROM yet because Mediatek isn't releasing Source Code of their ROMs. After Browsing Lenovo Site of the S6000 I have found this:
mobilesupport.lenovo.com/us/en/products/s6000_tablet?tabname=manuals
You get linked to Manuals, click on Downloads section and then there is:
Open Source Code - S6000 Tablet 10/12/2013 - 320MB
Don't know if it's the right thing, just wanted to mention it here.
And other News on KitKat:
news.softpedia.com/news/Android-4-4-KitKat-Update-for-Lenovo-Yoga-8-Inch-and-10-Inch-Tablets-Coming-in-June-438474.shtml
It's getting closer now, first 4.4 mediatek tablet ( lenovo yoga ) get's update in June. Let's hope for a compatible version / port for the S6000.
In am wondering if the Updates for the Yoga Tablets are compatible with the S6000, cause they use same processor and overall same specs.
Greetings JanDr0id
ps: i erased the httttttp in front of the links cause its my 1st post and xda isnt allowing me to post links yet.
I saw that mediatek released their source for kitkat. All the parts are there. Just need a Dev with one of these to assemble it.
barc0d3 said:
I saw that mediatek released their source for kitkat. All the parts are there. Just need a Dev with one of these to assemble it.
Click to expand...
Click to collapse
Lets hope there is a developer that can help compile it.

Cataclysm mod

Does anyone know if cataclysm mod will work on mhc19l? I tried but only make it to splash screen.
Seems like you've answered your own question. If you're only getting the splash screen, that means this most recent update is no longer compatible with catamod files. Catamod is only a handful of files, but any of those changed with this most recent update, which I believe many have, then it wont work.
uodii said:
Seems like you've answered your own question. If you're only getting the splash screen, that means this most recent update is no longer compatible with catamod files. Catamod is only a handful of files, but any of those changed with this most recent update, which I believe many have, then it wont work.
Click to expand...
Click to collapse
Do u know where we can get any thing similar to what catamod accomplished? Thanks
treIII said:
Do u know where we can get any thing similar to what catamod accomplished? Thanks
Click to expand...
Click to collapse
Unfortunately, no.. I haven't upgraded to MHC19I yet because of this reason but probably will soon. IMO the closest thing is xposed + gravity box since it uses the stock rom as the base and adds mods on top of it which is similar to how Cata works. I haven't used xposed in a while but probably will give that set up a try soon for the bluetooth bug fixes, etc. in the latest build. But I sure wish @atl4ntis would come back to us.. sigh..
As far as I can tell there are no other custom stock based ROMs out there for the 6P other than ones that just "debloat" the stock ROM but add no features, which I'm not really interested in. I've been checking out the Pure Nexus thread and it seems like another good option-- AOSP based instead of stock but seems to be well maintained and there seems to be a lot of positive feedback on it so I might also give that a shot. In between both options right now...

Categories

Resources