[HOW TO] Root and Install CWM without USB, Odin, or Computer: 2013 Version - Epic 4G General

Thanks to alephzain, bbelos/CMTeamEpic, DRockstar, koush, neldar, QBKing77, and toadlife!
See a change log of edits to this post at the bottom. Any corrections or suggestions are welcomed.
This How To will explain how you can root and install ClockworkMod on a stock Epic 4G (SPH-D700) running Gingerbread FC09 without a USB cable, Odin, and with or without a computer. My phones USB pins are busted, but otherwise it charges fine and works great. So I spent many determined days figuring out how I may eventually install CyanogenMod. This first requires getting ClockworkMod on the phone.
IMPORTANT NOTE: Be sure to follow the exact procedure below.
How will you get files onto your phones external sdcard?
Novice:
- Without a computer: Download files using a browser found in the Google Play Store: Firefox, Dolphin.
- With a computer: Email yourself the files and use your phones email app to save them to your sdcard.
- With a computer: Remove your external sdcard, insert it into an adapter, then insert/connect it to your computer to copy files to the sdcard.
Expert:
- With a computer: Its possible to access "offline files" with Google Drive, but its a bit cumbersome to find the file using a file manager.
- With WiFi and a computer: After gaining root, install the "WiFi ADB" app and download the Android ADB tools for your OS: Windows, Mac OS X, Linux
Transfer the following files to your sdcard (see attachments below):
- Framaroot-1.6.1.apk
- CleanGB_Kernel_0b28e9767b.zip
- cwm-5.0.2.7-epic4g.zip
Get Rooted:
- On your phone go to Settings -> Applications -> Check: Unknown Sources
- Install the Framaroot-1.6.1.apk package.
Install the following apps from the Google Play Store:
- SGS Kernel Flasher
- ROM Manager
Start SGS Kernel Flasher:
- Backup your stock kernel, but if you re-flash your stock kernel then you will need to repeat the following procedures.
- Choose Kernel -> Select CleanGB_Kernel_0b28e9767b.zip -> Flash Kernel
- Reboot
Start ROM Manager:
- Select Reboot into Recovery
Recovery Mode:
- Press the Settings icon: You should now be in CWM v3.1.0.1 (use volume up/down, camera to select, home to go back)
- Select: install zip from sdcard -> toggle signature verification -> choose zip from sdcard -> cwm-5.0.2.7-epic4g.zip
- Reboot
Verify CWM Installed:
- Power off phone, wait a few seconds after vibration indicates phone is powered off.
- Hold down: Volume Down, Camera, and Power On.
- Release when the icons light up.
- You should see "CWM-based Recovery v5.0.2.7" and the menu in blue text.
Congratulations you flashed ClockworkMod without USB or Odin!
What now? How about installing CyanogenMod? Well thats my next step and I highly suggest your phone already be activated, the PRL updated, data/contacts synced/backed up, and all services working before installing CyanogenMod stable. Otherwise, as of today (CM v10.1), you will need to temporarily boot into Samsungs FC09 in order to perform these functions.
I hope you find this How To helpful. Feel free to aks any questions, but please Google search for any "inbetween steps" that I have left out of this How To for the purpose of brevity.
Good luck!
Change Log:
12/08/2013: (Major Addition) Added important note. Added backing up stock kernel.
11/21/2013: (Minor Addition) Added email method for transferring files to your sdcard. Clean up.
11/20/2013: (Minor Addition) In case their sources disappear I have attached the required files.
11/18/2013: (Minor Correction) Improved links. Clean up.
11/17/2013: (Major Correction) Corrected spelling of Framaroot-1.6.1.apk filename.
11/16/2013: (Minor Correction) After installing CyanogenMod 10.1 (STABLE) I realized the above version CWM is not the latest.

Appreciate the effort and updated info.

Mr_You said:
Thanks to alephzain, bbelos/CMTeamEpic, DRockstar, koush, neldar, QBKing77, and toadlife!
See a change log of edits to this post at the bottom. Any corrections or suggestions are welcomed.
This How To will explain how you can root and install ClockworkMod (CWM) on a stock Epic 4G (SPH-D700) running FC09 without a USB cable, Odin, and with or without a computer. My phones USB pins are busted, but otherwise it charges fine and works great. So I spent many determined days figuring out how I may eventually install CyanogenMod. This first requires getting ClockworkMod on the phone.
How will you get files onto your phones external sdcard?
Novice:
- Without a computer: Download files using a browser found in the Google Play Store: Firefox, Dolphin.
- With a computer: Email yourself the files and use your phones email app to save them to your sdcard.
- With a computer: Remove your external sdcard, insert it into an adapter, then insert/connect it to your computer to copy files to the sdcard.
Expert:
- With a computer: Its possible to access "offline files" with Google Drive, but its a bit cumbersome to find the file using a file manager.
- With WiFi and a computer: After gaining root, install the "WiFi ADB" app and download the Android ADB tools for your OS: Windows, Mac OS X, Linux
Transfer the following files to your sdcard (see attachments below):
- Framaroot-1.6.1.apk
- CleanGB_Kernel_0b28e9767b.zip
- cwm-5.0.2.7-epic4g.zip
Get Rooted:
- On your phone go to Settings -> Applications -> Check: Unknown Sources
- Install the Framaroot-1.6.1.apk package.
Install the following apps from the Google Play Store:
- SGS Kernel Flasher
- ROM Manager
Start SGS Kernel Flasher:
- You may backup your kernel, but if you re-flash your stock kernel then you will need to repeat the following procedures.
- Choose Kernel -> Select CleanGB_Kernel_0b28e9767b.zip -> Flash Kernel
- Reboot
Start ROM Manager:
- Select Reboot into Recovery
Recovery Mode:
- Press the Settings icon: You should now be in CWM v3.1.0.1 (use volume up/down, camera to select, home to go back)
- Select: install zip from sdcard -> toggle signature verification -> choose zip from sdcard -> cwm-5.0.2.7-epic4g.zip
- Reboot
Verify CWM Installed:
- Power off phone, wait a few seconds after vibration indicates phone is powered off.
- Hold down: Volume Down, Camera, and Power On.
- Release when the icons light up.
- You should see "CWM-based Recovery v5.0.2.7" and the menu in blue text.
Congratulations you flashed ClockworkMod without USB or Odin!
What now? How about installing CyanogenMod? Well thats my next step and I highly suggest your phone already be activated, the PRL updated, data/contacts synced/backed up, and all services working before installing CyanogenMod stable. Otherwise, as of today (CM v10.1), you will need to temporarily boot into Samsungs FC09 in order to perform these functions.
I hope you find this How To helpful. Feel free to aks any questions, but please Google search for any "inbetween steps" that I have left out of this How To for the purpose of brevity.
Good luck!
Change Log:
11/21/2013: (Minor Addition) Added email method for transferring files to your sdcard. Clean up.
11/20/2013: (Minor Addition) In case their sources disappear I have attached the required files.
11/18/2013: (Minor Correction) Improved links. Clean up.
11/17/2013: (Major Correction) Corrected spelling of Framaroot-1.6.1.apk filename.
11/16/2013: (Minor Correction) After installing CyanogenMod 10.1 (STABLE) I realized the above version CWM is not the latest.
Click to expand...
Click to collapse
This rooting method works, but i have a problem.
The kernel has the su binary installed, nd thats the problem; with a root checker it says no root access. Now i cant do anything else because everytime i do something to fix this issue, it stays the same after a reboot
Please help me

TheKillah512 said:
This rooting method works, but i have a problem.
The kernel has the su binary installed, nd thats the problem; with a root checker it says no root access. Now i cant do anything else because everytime i do something to fix this issue, it stays the same after a reboot
Please help me
Click to expand...
Click to collapse
The purpose of the CleanGB kernel is to provide CWM v3.1.0.1. You only need to install Framaroot to root the phone.
I'm not exactly sure where you are stuck or what you are trying to achieve. I tried duplicating the process, but it is entirely possible that I made an error so any corrections are helpful.

Mr_You said:
The purpose of the CleanGB kernel is to provide CWM v3.1.0.1. You only need to install Framaroot to root the phone.
I'm not exactly sure where you are stuck or what you are trying to achieve. I tried duplicating the process, but it is entirely possible that I made an error so any corrections are helpful.
Click to expand...
Click to collapse
Mr_You said:
The purpose of the CleanGB kernel is to provide CWM v3.1.0.1. You only need to install Framaroot to root the phone.
I'm not exactly sure where you are stuck or what you are trying to achieve. I tried duplicating the process, but it is entirely possible that I made an error so any corrections are helpful.
Click to expand...
Click to collapse
Yes, im sorry that i have to make u go through all this trouble because maybe im doing this wrong..
What i was trying to say is that the kernel also has 'su' in /sbin (im not sure if this is the problem but in my galaxy s3 the 'su' is only located in /system/bin and /system/xbin)
I also read this article where it said that the 'su binary' isnt supposed to be in /sbin because in this case (what i think its saying is) that everytime it boots up the /sbin is part of the booting process. Here is the website link: htt p://a ndro idsu.co m (cant post links yet damn)
" People with the su binary located in /sbin have a much tougher time. I’ve found that these are mostly Samsung users (with the notable exception of the Nexus S). I don’t know why it’s done this way, and if anybody does know, please let me know, but for some reason kernel and ROM devs for these devices put su in /sbin. /sbin is part of the boot.img, and therefore any modifications to that directory will be erased on boot."
What i first did is installed Framaroot nd rooted the phone, then got excited because i had been trying to root it for like 2 years now with no success, so since i thought i knew what i was doing, i trailed off nd tried to install CWMR through Rom Manager then went into recovery nd for some weird reason it just put me in the stock android recovery so i knew something went wrong... Then i got scared nd tried to go back to your method nd installed the kernel flasher so i flashed the kernel, rebooted, nd then went into the superuser app. It said the SU binary needed to be updated (got surprised because it didnt say that before i flashed the kernel) i put continue nd it showed me an option to install it through TWRC/CWMR or install normally,so i chose through CWM nd it actually booted me up into CWM but then it said something about a command not working [it was some couple days ago so i cant remember what it said exactly] so i messed around with CWM and tried to installed CyanogenMod which i had downloaded previously, did the signature verification toggle off, but it still said installation aborted because of the command or something... Then i rebooted the phone nd then the problems started, in the superSU app i tried to install normally but it said installation failed... Got the root checker nd said su found in /sbin /system/bin and /system/xbin but i had no root access so i panicked nd tried to root it again with Framaroot, it said success nd i rebboted but it didnt work. I ran the root checker again nd it was the same. I tried to go back to a backup i did when i only had root without the kernel but(which by the way by the end of the backup it said couldnt make md5 sums)but idk why but it took me to the stock android recovery so i couldnt make a restore. I felt trapped cs i couldnt go back to before i had the kernel. With no root access i couldnt also do the restore to the stock kernel(SGS Kernel Flasher app) because i made a backup of it in case something went wrong.. Unfortunately it did so now with no root access i cant really do nothing anymore... I was thinking of using odin to go back to its original state, but then i remembered that it was impossible because odin never recognized my phone while in download mode... Im short in options on what to do please help, im still a noob

Can you try to do a factory reset from the stock recovery and start over?

Mr_You said:
Can you try to do a factory reset from the stock recovery and start over?
Click to expand...
Click to collapse
Yes, thats exactly what i did two times but it didnt work because once you flash something theres no way to go back unless you have a backup and a way to restore it or is there a way i dont know of?? I also checked right after the factory reset in the settings nd it still had the same kernel, and the root checker still said the su binaries were installed in the 3 places i mentioned earlier nd still without root access

TheKillah512 said:
Yes, thats exactly what i did two times but it didnt work because once you flash something theres no way to go back unless you have a backup and a way to restore it or is there a way i dont know of?? I also checked right after the factory reset in the settings nd it still had the same kernel, and the root checker still said the su binaries were installed in the 3 places i mentioned earlier nd still without root access
Click to expand...
Click to collapse
EDIT: If you have tried this procedure on a Galaxy S3 then I would suggest this discussion be continued on the appropriate forum.

Mr_You said:
EDIT: If you have tried this procedure on a Galaxy S3 then I would suggest this discussion be continued on the appropriate forum.
Click to expand...
Click to collapse
No, lets get this straight. I already rooted my gs3 a long time ago nd i didnt use this procedure with it. I used this procedure with my Epic

TheKillah512 said:
No, lets get this straight. I already rooted my gs3 a long time ago nd i didnt use this procedure with it. I used this procedure with my Epic
Click to expand...
Click to collapse
I assume you've already tried uninstalling any SU-type packages?

Mr_You said:
I assume you've already tried uninstalling any SU-type packages?
Click to expand...
Click to collapse
Yes i did.. In the SuperSU app in the settings section it has an option to Full Unroot, nd i think it works but it has to reboot, and at the time of reboot, the kernel overrides it and gets rid of any modifications like getting unrooted..
Looks like im going to have to bear with this nd just leave it like that, besides i already have a rooted gs3

TheKillah512 said:
Yes i did.. In the SuperSU app in the settings section it has an option to Full Unroot, nd i think it works but it has to reboot, and at the time of reboot, the kernel overrides it and gets rid of any modifications like getting unrooted..
Looks like im going to have to bear with this nd just leave it like that, besides i already have a rooted gs3
Click to expand...
Click to collapse
So your are running CleanGB? When you open ROM Manager and select "Boot into Recovery" does it boot into CWM v3 and are you able to flash CWM v5 or do you still get the error?

Mr_You said:
So your are running CleanGB? When you open ROM Manager and select "Boot into Recovery" does it boot into CWM v3 and are you able to flash CWM v5 or do you still get the error?
Click to expand...
Click to collapse
Yes i am running CleanGB nd when i use rom manager and select "Boot into Recovery" it does nothing because i dont have root access and that means it doesnt have permissions to boot into recovery, however i did also try to manually boot into recovery but it took me to the stock recovery.. Is this supposed to happen??

TheKillah512 said:
Yes i am running CleanGB nd when i use rom manager and select "Boot into Recovery" it does nothing because i dont have root access and that means it doesnt have permissions to boot into recovery, however i did also try to manually boot into recovery but it took me to the stock recovery.. Is this supposed to happen??
Click to expand...
Click to collapse
Yes that is normal.
I see you say you tried reinstalling Framaroot, but try reinstalling again. But don't reboot. Afterwards go straight into ROM Manager and select "Boot into Recovery" and if rooting was successful I believe it should boot into CleanGBs CWM v3 recovery.

It did boot up into CWM v3 nd i tried to flash the CWM v5 but there were these weird things, look ill show u a picture of it.
Sent from my SPH-L710 using XDA Premium 4 mobile app

TheKillah512 said:
It did boot up into CWM v3 nd i tried to flash the CWM v5 but there were these weird things, look ill show u a picture of it.
Click to expand...
Click to collapse
For some reason all the forums posts images are broken for me. It seems to be a 404 error.
Ok lets try this:
Make sure you are rooted (install Framaroot again if you need to, don't reboot) and start SGS Kernel Flasher and flash your backup backed up stock kernel and reboot. Then try following the procedure again from the top as described to try to install CWM. Rebooting your stock kernel may or may not fix these issues. If it doesn't then it may require finding a way to fix it via a Terminal app or other method.

I seem to be rooted in some ways but not in others
I installed Framaroot and it claimed success. However, that doesn't seem to be true according to the Root Checker app. I removed Framaroot, rebooted, reinstalled, and reran it with no difference. But what's weird is the first time it seemed to work, so I went ahead and tried to flash CleanGB and it worked. I'm currently running CleanGB.
The problem now is that when I ask ROM Manager to Boot into Recovery it won't do it, presumably because I don't have root access. What can I do next? Any suggestions are appreciated!

cdupree said:
The problem now is that when I ask ROM Manager to Boot into Recovery it won't do it, presumably because I don't have root access. What can I do next? Any suggestions are appreciated!
Click to expand...
Click to collapse
I would try reinstalling Framaroot (and don't reboot) then: Start ROM Manager->Reboot into Recovery

cdupree said:
I installed Framaroot and it claimed success. However, that doesn't seem to be true according to the Root Checker app. I removed Framaroot, rebooted, reinstalled, and reran it with no difference. But what's weird is the first time it seemed to work, so I went ahead and tried to flash CleanGB and it worked. I'm currently running CleanGB.
The problem now is that when I ask ROM Manager to Boot into Recovery it won't do it, presumably because I don't have root access. What can I do next? Any suggestions are appreciated!
Click to expand...
Click to collapse
Thats exactly what is happening to me too, friend...
Sent from my SPH-L710 using XDA Premium 4 mobile app

TheKillah512 said:
Thats exactly what is happening to me too, friend...
Click to expand...
Click to collapse
Sorry you're mistaken. You just posted a pic of CWM v3. So your "Reboot into Recovery" from ROM Manager worked.
Did you try what I suggested here to fix your errors?

Related

[q] i give up!!

Ok so far i have updated my baseband to xxx15 and i have rooted my phone installed root explorer busybox etc, i have tried installing XRecovery 1000s of times and have done everything possible i just really want 2.2 froyo on my X8 and i've tried so many times to use XRECOVERY and have gone through every tutorial but it don't seem to work.
Are there any suggestions?
Any other ways to install froyo 2.2 custom roms onto my phone?
Post here the complete procedure you made, step by step.
Maybe anything is going wrong.
Don't give up
/youtube.com/watch?v=lPV6Ue5a0Ww
thats the way I make but with a different ROM it's easy Don't forget to make a backup of your data!
Firstly I updated my baseband to xxx15 and then I rooted using superoneclick and installed busybox from market then I got root explorer and placed the 3 recovery files in system bin and set permissions and mounted in RW and rebooted and clicked back button but nothing comes and have tried Apk xrecovery which still don't work....
Aren't there any other ways apart from using recovery to install custom time because in going crazy here.. I did that YouTube tutorial but it still didn't work.
don't hold the back key, you must tap it fast, when you hold it it will not work, just tap it!
I have beem tapping it but nothing happens
I was having the same exact problem, but then i used the Flash tool, and after click "ask root perms" i clicked "optimize" and after that my phone rebbot onto Xrecovery.
Could you give me a step by step guide through of what you did please?
I´ll try.
If you already done everything else the only thing left is to download the flash tool from here:
http://forum.xda-developers.com/showthread.php?t=986697
Then after download, open the flash tool, after open, you will see in the top some buttons, click on the one "ask root perms" first, and after click on the one that says "optimize".
When i did that the phone rebooted to Xrecovery.
If you have any doubts ask and i will try to help.
aaron187 said:
Firstly I updated my baseband to xxx15 and then I rooted using superoneclick and installed busybox from market then I got root explorer and placed the 3 recovery files in system bin and set permissions and mounted in RW and rebooted and clicked back button but nothing comes and have tried Apk xrecovery which still don't work....
Aren't there any other ways apart from using recovery to install custom time because in going crazy here.. I did that YouTube tutorial but it still didn't work.
Click to expand...
Click to collapse
It's like this, after you install busybox from market, the file you had in SD is changed, (really don't know why), so, the solution is the busybox file you have to move to System/bin, apart from chargemon and xrecovery, YOU must check it's size, busybox must have 700~ kbs, if not, download, or unzip current xrecovery given from many places (must be v0.1) and replace the correct busybox file with the wrong one inside sdcard.
So, YOU MUST BE CERTAIN the busybox file you are moving to system/bin has around 700kb~
I think you're done, reboot and good luck
ok ive tried this process but it still isnt working..........
i am having the exact same problem
I thought i was the only one!, seriously i need helpp aint there any other way to install custom roms,??
i heard somewhere you can use x10flashtool but i wont be the first one to try as i have had soo many problems in the last week its unreal. i cant even get the gingerbread theme on. can anybody post a full tutorial. i have freshly reformated my phone so its on adroid 2.1 and its blank. where do i go from here?
For all that could´t install, after you install busybox on the phone, did you go to the phone, open busybox and install?
yh i installed Busybox after download from market......... and yh i did go to busybox on phone and install but still no luck
Drakenfall said:
For all that could´t install, after you install busybox on the phone, did you go to the phone, open busybox and install?
Click to expand...
Click to collapse
Have you ever tried installed Busybox by installing Titanium Backup. tap the lower middle button to let it replaced by a workable one from the Market automatically, right after placing the three files you mentioned above?
This little trick may help...
... I'm NOW running Floyo2.2 beta v0.15 happily with this method for a couple of days, with multiple reboot from the beginning, but the rebooting problem is gone.
My favourite TrackID doesn't work in this beta, but I simply replaced it with Shazam ;-)
Drakenfall said:
I´ll try.
If you already done everything else the only thing left is to download the flash tool from here:
http://forum.xda-developers.com/showthread.php?t=986697
Then after download, open the flash tool, after open, you will see in the top some buttons, click on the one "ask root perms" first, and after click on the one that says "optimize".
When i did that the phone rebooted to Xrecovery.
If you have any doubts ask and i will try to help.
Click to expand...
Click to collapse
OMG OMG THANK YOU!!!!! SO MUCH!! it worked, YOU SIR ARE THE BESTTTTT
I just send you a solution but it doesnt let me send you the link for the files.....search this forum is a clear solution that works every time on me.....good luck
aaron187 said:
OMG OMG THANK YOU!!!!! SO MUCH!! it worked, YOU SIR ARE THE BESTTTTT
Click to expand...
Click to collapse
I´m glad i could help.

[Q] EVO Rom/Root problems

I am having some serious issues with my evo. I have tried 10 different methods, googled 100 different help guides and still no fix.
I had originally rooted my phone using simple root and put the "fixed" froyo rom on there. Everything worked fine, but I was outdated and having some really slow issues so I wanted to try a new rom...Fresh.
Well I tried a few methods, but I somehow reverted my evo back to a nonroot of the original OS. Whenever i go into hboot, my recovery does not work. I push the PC36img and load it, then restart then I attempt to go to my recovery where it gives me the error picture with the yellow/red triangle. I then select recovery (after pressing UP volume and powerbutton) and try to load update from sd card. Everytime I do that I get a Failed error.
I've tried to reroot using several methods off this website, I've done everything I can to get it working but can't. Any help would be GREATLY appreciated!
Try reflashing your recovery image.
BTW I have hboot 79.0 with S-ON, so it looks like I def became unrooted.
noweakness said:
BTW I have hboot 79.0 with S-ON, so it looks like I def became unrooted.
Click to expand...
Click to collapse
Not sure how it would have just unrooted itself. I would run an RUU from here: http://forum.xda-developers.com/showthread.php?t=884060
Then, I would re-root and start clean again.
Heaterz16 said:
Try reflashing your recovery image.
Click to expand...
Click to collapse
I have a recovery-ra.img, how do I tell it to flash it?
I pulled up this list of recovery files, is there a particular one I should use?
htt p://goo-inside.me/amon_ra/supersonic/
Heaterz16 said:
Not sure how it would have just unrooted itself. I would run an RUU from here: http://forum.xda-developers.com/showthread.php?t=884060
Then, I would re-root and start clean again.
Click to expand...
Click to collapse
Ok I downloaded the top item:
RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed
Ran the exe, surprisingly picked up my phone and started the image update. My phone restarted and it forced closed the app on my computer. Now I have a new HTC logo for about 5 min on my phone not doing anything. Should I wait it out or restart my phone?
noweakness said:
Ok I downloaded the top item:
RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed
Ran the exe, surprisingly picked up my phone and started the image update. My phone restarted and it forced closed the app on my computer. Now I have a new HTC logo for about 5 min on my phone not doing anything. Should I wait it out or restart my phone?
Click to expand...
Click to collapse
I would have waited about ten minutes then restarted the phone. If the phone is stuck at the HTC logo, then I would go ahead and re-run the RUU.
Let me know how it turns out.
Heaterz16 said:
I would have waited about ten minutes then restarted the phone. If the phone is stuck at the HTC logo, then I would go ahead and re-run the RUU.
Let me know how it turns out.
Click to expand...
Click to collapse
ok, finally got it working. Had to restart the phone manually and try it on a different computer. It updated it to the newer version of android and hboot, thank goodness! That was the easiest and most productive thing I've been able to do so far, thanks!
Well now I try to boot into recovery and get the same error:
can't open /cache/recovery/command
Then I get :
E: signature verification failed
Installation aborted
When i try to load update from sdcard
noweakness said:
ok, finally got it working. Had to restart the phone manually and try it on a different computer. It updated it to the newer version of android and hboot, thank goodness! That was the easiest and most productive thing I've been able to do so far, thanks!
Well now I try to boot into recovery and get the same error:
can't open /cache/recovery/command
Then I get :
E: signature verification failed
Installation aborted
When i try to load update from sdcard
Click to expand...
Click to collapse
Ok, so, I think you said you got the RUU working which would have completely restored the phone to unrooted and stock from factory.
Now, you need to re-root your phone using one of the methods on xda. I used the manual method here: http://forum.xda-developers.com/showthread.php?t=829045. However, many people have had success with the one-click methods.
After you re-root (which will likely included installing a recovery), select a rom you want to try, boot to recovery, wipe and flash it. A great starter ROM is MikFroyo 4.6 or 4.5.
Try downloading the PC36IMG.zip from here: http://forum.xda-developers.com/showthread.php?t=705026
put that on the root of your SD card, then boot into HBOOT and it should find that PC36IMG.zip after a few seconds and ask if you want to flash it. Choose yes and let it finish. Should then be able to reboot into recovery.
ok thanks, i'll try it when I get back home
jesuspgt said:
Try downloading the PC36IMG.zip from here: http://forum.xda-developers.com/showthread.php?t=705026
put that on the root of your SD card, then boot into HBOOT and it should find that PC36IMG.zip after a few seconds and ask if you want to flash it. Choose yes and let it finish. Should then be able to reboot into recovery.
Click to expand...
Click to collapse
Ok, I tried this method...the filesize of pc36img.zip is only 3.5mb, but it didn't seem to work. It scanned the file then just went back to the hboot screen with my options never asking to flash.
I'm going to try to reroot using the other method now...
So I clicked the link and he forwarded to the autoroot.bat page so I used his method. It worked well (the 2nd time around) all the way until it started to push amon_ra_1.8-mod.... then after that it says rebooting into the bootloader, and it reboots into it and just says waiting for phone...
It does appear that my phone is rooted now, but my recovery is still not working. If I use ROM manager will it work since my phone is rooted or do I need to have a rooted ROM to run it off of?
noweakness said:
So I clicked the link and he forwarded to the autoroot.bat page so I used his method. It worked well (the 2nd time around) all the way until it started to push amon_ra_1.8-mod.... then after that it says rebooting into the bootloader, and it reboots into it and just says waiting for phone...
It does appear that my phone is rooted now, but my recovery is still not working. If I use ROM manager will it work since my phone is rooted or do I need to have a rooted ROM to run it off of?
Click to expand...
Click to collapse
Does your phone show s-off while in the bootloader? If so you should be able to run the FlashZip script and use that to flash the pc36img-sprintlovers zip. That one contains everything needed to bring your phone up to date and will leave you with a rooted rom and recovery.
Sent from my PC36100 using XDA Premium App
xHausx said:
Does your phone show s-off while in the bootloader? If so you should be able to run the FlashZip script and use that to flash the pc36img-sprintlovers zip. That one contains everything needed to bring your phone up to date and will leave you with a rooted rom and recovery.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
FINALLY! Thanks a million! My recovery is now working and it installed the built in sprinter lovers rom, I guess the anti-virus was stopping it so I disabled it and ran the flash script. I was able to install Fresh on there, just to try it out. I do have a few questions though:
1. I noticed after going through many pages that to update to a newer ROM version you don't always have to wipe clean, you can just install (or flash) the new update? I noticed in Fresh there is a built in app that does that. Is this true for most ROMS or only certain ones?
2. I assume I am using the RA recovery. I noticed the backup/restore feature on there. What exactly does that backup and when should I use it?
3. I've noticed I've been very low with memory on my phone (not SD card), I have about 258MB free. How can I clear space and when I mount my phone what files are important to keep and can I get rid of, is it okay to get rid of my rom.zip's and radio.zip's?
Thanks again to everyone, autoroot was def the most painless root ever.
noweakness said:
FINALLY! Thanks a million! My recovery is now working and it installed the built in sprinter lovers rom, I guess the anti-virus was stopping it so I disabled it and ran the flash script. I was able to install Fresh on there, just to try it out. I do have a few questions though:
1. I noticed after going through many pages that to update to a newer ROM version you don't always have to wipe clean, you can just install (or flash) the new update? I noticed in Fresh there is a built in app that does that. Is this true for most ROMS or only certain ones?
2. I assume I am using the RA recovery. I noticed the backup/restore feature on there. What exactly does that backup and when should I use it?
3. I've noticed I've been very low with memory on my phone (not SD card), I have about 258MB free. How can I clear space and when I mount my phone what files are important to keep and can I get rid of, is it okay to get rid of my rom.zip's and radio.zip's?
Thanks again to everyone, autoroot was def the most painless root ever.
Click to expand...
Click to collapse
1) You'll want to always wipe your cache/dalvik (I do everytime I'm in the recovery) but the Data depends on the ROM. Usually if you are going from one sense rom to another you are ok and the same for AOSP to AOSP. Going from Sense to AOSP you'll need to wipe data though.
2) Autoroot comes with a modified version of AmonRA, they are mostly just speed tweaks. To make a complete backup of your ROM select Boot (kernel), System (ROM), Data (Apps & Settings) and .android (apps on SD card)
3) You can delete the zips from your sd card if you don't need them but that's about normal for free memory.

Need help flashing CM ROM

I'm having trouble with my samsung vibrant (galaxy S) I want to flash CM on it. I have root access, Clockwork Mod recovery, and ROM Manager. I go in to ROM manager and select flash ROM from SD card, I select the CM ROM which I downloaded but it gives an error "Status 7" when trying to install, and will not flash the new ROM. Any help with this would be appreciated.
ok first go into clockwork recovery on rom manager and pick flash clockwork recovery and pick vibrantmtd then pick 3x NOT 2X! Then go to download rom and choose cm7 nightlie 8 or under as above have many probs. On ur nightlie choose all three! wipe data, wipe dalvik and backup rom. On ur second nightlie u just have to wipe dalvik and backup rom.
Thanks for the help. I tried that with a slight variation. I had to manually put the ROM on the root of the SD card and named it update.zip. I flashed clockwork recovery and selected 3.x as you said. I selected all 3 options for backup and wipe. Once in recovery I select "Reinstall packages" and it finds update.zip but aborts installation with "Status 7"
Ur doing it wrong. Update package is for only rooting ur phone.
Sent from my SGH-T959 using XDA Premium App
First root ur phone! Then follow my directions to get cm7
Sent from my SGH-T959 using XDA Premium App
the phone is rooted. Is there an easy way for me to double check that? Maybe I'm confusing two processes, but I do have the ROM on the SD card. Am I trying to apply it incorrectly? When I'm in recovery my only options are:
Reboot system now
reinstall packages
delete all user data
delete cache data
format internal SD-card
I'm used to see other option such as on my MT4G which has "install zip from SD card" That is what I typically use to flash a new rom.
Sorry if I'm missing something, but I do appreciate the help
I've been messing with it all night. I wound up doing the ODIN to JFD to get myself back to 2.1. I installed rom manager again, and it appears that when I tell it to flash clockwork mod and then reboot in to recovery I am actually going to stock recovery. I think the options that I listed earlier are for stock recovery as well. I think the main thing I'm missing is the "Install ZIP from SD Card" option in recovery. I guess at this point I'm unsure if I'm rooted, and don't know how to get the correct recovery so I can flash the ROM I'd like.
If ur recovery is blue then u need reinstall packages twice then u will be rooted, then it will turn green. Then go into rom manager and flash clock work recovery. Then put ur rom on internal sd and ur ready to flash. Enjoy
Sent from my SGH-T959 using XDA Premium App
Ok, so we can narrow things down a bit. My recovery is blue. I've downloaded the update.zip that I found from "NOOB Root guide" here on XDA, but no matter how many times I reinstall packages recovery never turns green.
I've also tried the one click root method which does the same thing as above but it just automates things a bit. (http://forum.xda-developers.com/showthread.php?t=739300)
Bump.
Many thanks to movieaddict who has helped so far, but it appears that I don't have root access, and the typical steps found in this thread are not working for me. Any other ideas?
ok is ur phone hardware locked?? by checking by doing this do the 3 button combo to get into download mode. First power off ur phone then plug in ur usb cable to phone and into pc then hold down the up volume and down volume and THEN hold down the power button and let go after a few sec u should see download mode.. If it goes into download mode then ur phone is not hardware lcked and we can go from there if it is hardware locked? then follow this link
http://forum.xda-developers.com/showthread.php?t=801722
if it isnt hardware locked then make sure update package file isnt corrrupted and make sure u put it on ur internal sd card. Make sure the update package is 632 kb sometimes when downloading stuff happens.
im gonna tell u how i do root and flash! First odin back to eclair must easier to root then. Second put the update package on ur internal sd card and dont unrar it leave it as is. Then turn off ur phone and hold down the up volume and the down volume and THEN the power button and as when u SEE THE vibrant logo let go of power button. Ur recovery will be blue then select reinstall package and select yes, it will then go through stuff and come back to recovery blue then do it again and it will turn green. Once its green then select the rom u want to flash and ur ready to go.
Thanks again. From your instructions I can tell that the phone is hardware UNlocked. I've previously gotten in to download mode. also, I see some differences in how you describe the root process. The update.zip is 633kb, I'll try to redownload it again... also, when I hit reinstall packages I am not prompted with yes/no, it just does it. It is a very quick process, and then it auto reboots the phone, but you said it should bring me back to recovery. I'm not sure why that would be happening
I'll mess around with this some more tonight. Hopefully I can nail this down. Sorry to be a PITA.
yah it should bring u back to green recovery after doing it twice! Yah that was my bad it asks u yes or no when flashing...lol!
Sent u pm!!!
Try Superoneclick root! That always works for me. When u reinstall packages and it reboots, clockwork usually has NOT been installed, I always Odin then install Tom Manager, flash Clockwork, then its off to the races!
Sent from my Htcclay's SuperVibeCM7 using XDA Premium App
Sorry Rom Manager not Tom, lol
Sent from my Htcclay's SuperVibeCM7 using XDA Premium App
I've been going over the suggestions all night. I feel like I'm following the instructions... not that they are even that difficult. I get the update.zip on my sd card, I boot in to stock recovery (blue) I reinstall packages, the phone reboots in to normal boot mode, I reboot in to recovery and reinstall packages again. I repeat this process multiple times hoping that one of these times I'm going to see a green recovery. I know it's all smooth sailing from there. I even recorded a short clip of me doing this.
http://www.youtube.com/watch?v=RPreHj16UEU
Is it possible that i've tried so many different way of doing this that I have the phone in a weird state, and now these guides aren't working due to those previous attempts? I tried super1click... wound up getting an error "Getting mount path" ... "failed"
A simple way to check for root would be to download Terminal Emulator from the market and type in "su" without the quotations. If you get $ or permission denied you are not rooted. If you get a super user prompt followed by a # you should have root. Also which rom are you on now? If you are on stock Kb5 the recovery could be giving you some issues trying to flash the CWM recovery or at least for me it did. I suggest using ODIN to go back to JFD, then using super one click root (make sure your screen is set to not go off for the 10 or 30 minute time frame) I suggest this because I have had the "failure to mount" issues many times and it only seems to happen if my phone screen goes off while attempting the root. Once super one click completes, reboot your phone, install Rom manager, then reboot into recovery. You will have to select re install packages from there. The clockwork screen will be green as a few others have stated. I have attached an image below of clockwork, mine is orange since it's cm7 but yours will look similar,but green. From here just choose install from zip sd card, choose zip and flash away. Best of luck to you!
https://picasaweb.google.com/117659...?authkey=Gv1sRgCMbSsp7F4ZHWfg&feat=directlink
Is there something that removes the root access when you reboot the phone? I flashed the recovery for Galaxy S Vibrant (NOT Vibrant MTD) and was able to get to CWR (green), but sometimes when I go in to recovery it is back to blue... if I reinstall packages it takes me to green. Along those same lines I notice SU keeps asking me if the same application can have SuperUser permissions, so it seems like something is not sticking.
are you on 2.1 or 2.2? if you'r on 2.2 and use the update.zip it wont work you have to use superoneclick root ,happened to me too.
Thanks for responding. The phone was on 2.1 because I used ODIN to go back to JFD.
I've since sold the phone (didn't care for it much) and gotten a G2X (which I'm also not wild about). Thanks for all the help everyone!

S-off, Superuser denying root like crazy

Currently Running Miui 2.7.1.3 i believe the numbers are, whichever the latest version of the rom is. It installed no problem, was merely updating to try to fix theme issues from 2.6, and here is where the problem begins:
So i was browsing my phone and realised that i didn't have superuser on there, wondering why because usually every rom i ever ran had it automatically on there, installed it off of another site, the elite version, and from there everything got screwed up, i don't know what happened or why it started but, i could no longer run busybox, TBU, setcpu, nothing that requires root, due to the fact that superuser was denying root. I had no clue why, i've been reading threads for hours similar to "Superuser denying root" and such, and to no avail, the problem is still there, i have set superuser to both prompt and allow when asking for root, and neither worked, so i figured a clean fresh reflash of MIUI would help, however even after wiping and a clean install, root does not work, ive read some articles describing to just unroot and root again however it's been so long since ive rooted a phone, can anyone direct me to the best way to do this without having to do an ODIN and set up my phone allover again, keep in mind that it is still S-Off. What am i doing wrong?
I also have tried to clear data for superuser, as well as install multiple versions, neither have worked.
Any help is greatly appreciated!
ROBLEM SOLVED:
To those with similar problems to this who have ruled out other reasons, described in this thread, abandon Superuser and download SuperSU instead, it fixed my problem.
Odin is for Samsung Phones and if u lost root redownload the rom or Google super user and download the binaries and just flash them.
Sent from my Dark Unicorn Resurrected v.2.5 using Tapatalk 2
I tried all that, anyway im in the middle of a stock restore right now and trying to reroot but stuck at the damn visionary step >.<
I am now stuck with S-on and back in a stock rom, downgraded, and visionary still doesnt work, i give up
Try gfree method
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
You're very likely doing so much wrong..
MIUI has an option in settings - "allow superuser privileges". You didn't turn it on, and it's off by default. That's it. And from there you went to a whole new level of going the wrong way.
No amount of restoring to stock and re-rooting can help you. Root privileges aren't phone-specific, they're ROM-specific, and relevant only for the ROM currently on the phone. Reflash the ROM with something else - and existence or inexistence of root will depend on this "something else". Thus I fail to understand, what were you looking for when restoring to stock. It was as irrelevant as could possibly be.
Jack_R1 said:
You're very likely doing so much wrong..
MIUI has an option in settings - "allow superuser privileges". You didn't turn it on, and it's off by default. That's it. And from there you went to a whole new level of going the wrong way.
No amount of restoring to stock and re-rooting can help you. Root privileges aren't phone-specific, they're ROM-specific, and relevant only for the ROM currently on the phone. Reflash the ROM with something else - and existence or inexistence of root will depend on this "something else". Thus I fail to understand, what were you looking for when restoring to stock. It was as irrelevant as could possibly be.
Click to expand...
Click to collapse
I believe you got two troubleshootings steps backwards.
After you have searched and exhausted every troubleshooting step you found (which obviously wasn't thorough), you should have posted in the MIUI thread about the problem. They might have scolded you a little before answering, but you would have gotten your answer.
Flashing back to stock is ALWAYS your last resort. It should only be done after scouring the web for answers, then asking for the answer, and when there is no other alternative - FroYo PD15IMG.zip.
Jack is blunt, but as he's as right as always.
I'm not one to deny mistakes, that sure was stupid of me not to look, i guess i just thought there were deeper problems than just the rom having it turned off, anyway i'm doing the downgrade now and it should work, thank you for the help its appreciated
Jack_R1 said:
You're very likely doing so much wrong..
MIUI has an option in settings - "allow superuser privileges". You didn't turn it on, and it's off by default. That's it. And from there you went to a whole new level of going the wrong way.
No amount of restoring to stock and re-rooting can help you. Root privileges aren't phone-specific, they're ROM-specific, and relevant only for the ROM currently on the phone. Reflash the ROM with something else - and existence or inexistence of root will depend on this "something else". Thus I fail to understand, what were you looking for when restoring to stock. It was as irrelevant as could possibly be.
Click to expand...
Click to collapse
Could you point me to this "allow superuser privileges"? I have restored with recovery and have yet to find such a setting.
If you are referring to the permission guard, it allows everything, and there is no setting to simply turn it on
No, not this one. It's been some time since I sold my Nexus One, which was running MIUI back at the time, but I understand that in the newer MIUI there is an app or setting, called LBC guard, which controls both Superuser access and app permissions. Try looking it up.
P.S. I remember CM team member post, saying that the newer CM9 also come with root privileges turned off by default, because they decided it's a safer way.
Right, and the Permission Guard is run by LBC guard, there is no way to set anything different from what i have, i believe its a problem with the busybox binaries and superuser binaries, i'm trying to use this SuperSU instead of superuser to see if that will work. If i remember correctly before all this happened i may have hit uninstall busybox by accident and that may be why its not working, could be that ive never had busybox working and haven't been able to install it due to the SU problem
EDIT: Yes i have solved it now, SuperSU actually makes the prompts for superuser come up now, im using it instead of superuser entirely, must be deeper problems with original superuser
If you had SuperSU installed on the system and additionally installed the regular Superuser, or the other way around - these two are incompatible on binaries AFAIK, and mixing the applications without cleaning up the build and using the correct binary could cause what you were experiencing.
Yes your probably correct only i had two separate versions of superuser that didnt overwrite and that must be where the binaries got messed up
The 1st thing I usually do when I install a new rom, is install SuperSU, update the binaries then I use Titanium to uninstall Superuser.
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
Drakona.cookie said:
Currently Running Miui 2.7.1.3 i believe the numbers are, whichever the latest version of the rom is. It installed no problem, was merely updating to try to fix theme issues from 2.6, and here is where the problem begins:
So i was browsing my phone and realised that i didn't have superuser on there, wondering why because usually every rom i ever ran had it automatically on there, installed it off of another site, the elite version, and from there everything got screwed up, i don't know what happened or why it started but, i could no longer run busybox, TBU, setcpu, nothing that requires root, due to the fact that superuser was denying root. I had no clue why, i've been reading threads for hours similar to "Superuser denying root" and such, and to no avail, the problem is still there, i have set superuser to both prompt and allow when asking for root, and neither worked, so i figured a clean fresh reflash of MIUI would help, however even after wiping and a clean install, root does not work, ive read some articles describing to just unroot and root again however it's been so long since ive rooted a phone, can anyone direct me to the best way to do this without having to do an ODIN and set up my phone allover again, keep in mind that it is still S-Off. What am i doing wrong?
I also have tried to clear data for superuser, as well as install multiple versions, neither have worked.
Any help is greatly appreciated!
ROBLEM SOLVED:
To those with similar problems to this who have ruled out other reasons, described in this thread, abandon Superuser and download SuperSU instead, it fixed my problem.
Click to expand...
Click to collapse
Anyone else with this problem go in the permissions app and enable root as miui uses its own root for security reasons.
Sent from my T-Mobile MyTouch 4g using xda premium
MIUI uses a customized superuser app. Use it and follow the instructions. Cnote ports the ROM. He knows what he's talking about.
Hello, I am a newbie and looking for a miracle. I am going to apologize for the length of this message in advance. Couple days ago I perm rooted the HTC Glacier Mytouch 4g using the instructions at //wiki.cyanogenmod.org/w/Install_CM_for_glacier . As instructed, I downgraded the software to 1.17.531.2 and then perm rooted with S-Off on the device. Then, I installed the cyanogenMod 7.2.0-glacier (stable version) with the google apps. Everything worked great and was happy.
Right after I installed AdFree from Googleplay, I had issues but problem may not be caused by this app. Googleplay gave me a message of an “error no connection”. I got a message that the “ADWLauncher failed to launch” over and over again which prevented me from doing anything else. I was able to reboot the phone in between the notifications of the ADWLauncher failure. When I was back up and running, I got the same message of Googleplay “error no connection” and ADW failure very quick after start up. I pulled the battery and did a hard power up (volume down plus power button at same time). This is when things got worse. The Hboot starts up and wants to update, which I did but then I could not choose recovery mode to install a backup. If I choose not to update Hboot, then I only have the option to restart the phone. I can see on top of the screen “Glacier PVT SHIP S-OFF” .
Wait – things get worse. I am no longer running the cyanogenmod ROM but am back to the downgraded ROM 1.17.531.2. I still can’t download from googleplay because I get the message “Error no connection”, even though I am running on the old ROM. I can’t download apps from the phone, but I can push apps to phone from my googleplay account. I did push the ROM Manager app to the phone. When I start the ROM Manager, I get the message “You must root phone for ROM to function. Superuser was not found at “/system/bin/su” or “/system/xbin/su”.
I tried to start the recovery through adb using “adb reboot recovery”, but I get a power off symbol (a red circle) and phone freezes. I need to pull the battery to reboot.
Again sorry for the length. I am hoping for a miracle. Since I can’t do anything in the hard power up mode, I need to find a way to fix through adb or fastboot. Does anyone know how to get the Superuser installed through adb or fastboot? Is there a way to flash another custom ROM that has a superuser installed through adb or fastboot?
BTW. Gmail works fine.
thanks
Droid-2 said:
Hello, I am a newbie and looking for a miracle. I am going to apologize for the length of this message in advance. Couple days ago I perm rooted the HTC Glacier Mytouch 4g using the instructions at //wiki.cyanogenmod.org/w/Install_CM_for_glacier . As instructed, I downgraded the software to 1.17.531.2 and then perm rooted with S-Off on the device. Then, I installed the cyanogenMod 7.2.0-glacier (stable version) with the google apps. Everything worked great and was happy.
Right after I installed AdFree from Googleplay, I had issues but problem may not be caused by this app. Googleplay gave me a message of an “error no connection”. I got a message that the “ADWLauncher failed to launch” over and over again which prevented me from doing anything else. I was able to reboot the phone in between the notifications of the ADWLauncher failure. When I was back up and running, I got the same message of Googleplay “error no connection” and ADW failure very quick after start up. I pulled the battery and did a hard power up (volume down plus power button at same time). This is when things got worse. The Hboot starts up and wants to update, which I did but then I could not choose recovery mode to install a backup. If I choose not to update Hboot, then I only have the option to restart the phone. I can see on top of the screen “Glacier PVT SHIP S-OFF” .
Wait – things get worse. I am no longer running the cyanogenmod ROM but am back to the downgraded ROM 1.17.531.2. I still can’t download from googleplay because I get the message “Error no connection”, even though I am running on the old ROM. I can’t download apps from the phone, but I can push apps to phone from my googleplay account. I did push the ROM Manager app to the phone. When I start the ROM Manager, I get the message “You must root phone for ROM to function. Superuser was not found at “/system/bin/su” or “/system/xbin/su”.
I tried to start the recovery through adb using “adb reboot recovery”, but I get a power off symbol (a red circle) and phone freezes. I need to pull the battery to reboot.
Again sorry for the length. I am hoping for a miracle. Since I can’t do anything in the hard power up mode, I need to find a way to fix through adb or fastboot. Does anyone know how to get the Superuser installed through adb or fastboot? Is there a way to flash another custom ROM that has a superuser installed through adb or fastboot?
BTW. Gmail works fine.
thanks
Click to expand...
Click to collapse
I would download a recovery image and use fastboot to install it. Maybe something is wrong with your recovery.
fastboot flash recovery recoveryname.img
Then wipe system, do a factory reset, and wipe dalvik-cache before flashing a ROM. Also, re-download your ROM.
estallings15 said:
I would download a recovery image and use fastboot to install it. Maybe something is wrong with your recovery.
fastboot flash recovery recoveryname.img
Then wipe system, do a factory reset, and wipe dalvik-cache before flashing a ROM. Also, re-download your ROM.
Click to expand...
Click to collapse
Thanks - I will need to try this later

Root & Encryption

Hi there,
I have to say... I feel a LOT more secure with my Edge+ (G928G) rooted than stock.
Using STOCK ROM (AOJ4) with arter97´s 10b2 kernel and Phillz recovery.
On top of that, I am using an OpenVPN to other countries and filtering by adguard through local proxy. AFWall as well, so I think that I´ve managed to get rid of tracking with that.
The only problem right now is the fact that encryption is not working. I already searched a lot about it and it seems to be related to supersu or the recovery but I am not sure.
So the question is: is there a way of getting encryption to work again? I have found this, but haven´t tried (afraid of loosing acess to my data)...
Any ideas?
Thanks in advance!
If you are talking about the below it is harmless to try. However, since you are already rooted just go to recovery first take a full backup copy it to your PC and fiddle with the phone to your heart's desire
1. According to him latest busybox needs to be installed.
2. After enabling USB Debugging on your phone, you need to go to adb shell on your PC and type su for root access . Accept the root permission request on your phone. You will then see in adb that the $ will turn into # . (That's what took me so long to get it right as a beginner )
3. Type following command: pkill -KILL daemonsu
This will temporarily disable supersu/root. (You see that the # will turn back into $. Also you'll see your apps won't be able to gain root access). After encrypting your phone will be automatically rooted again.
4. alphahere says not to open SuperSu afterwards. Just start with encryption.
This time encryption won't crash (at least it worked for me on BobcatRom and X-Note Rom). Yeahiiiii
Click to expand...
Click to collapse
Lost.soul said:
If you are talking about the below it is harmless to try. However, since you are already rooted just go to recovery first take a full backup copy it to your PC and fiddle with the phone to your heart's desire
Click to expand...
Click to collapse
No luck: got into a bootloop. In fact, won´t even load the custom recovery, keeps booting in the loop.
Will try to flash a stock ROM through Odin.
Yeah that's your best bet now. For recovery to no longer work this means encryption started yeah?
Sent from my SM-G928C using XDA Free mobile app
Lost.soul said:
Yeah that's your best bet now. For recovery to no longer work this means encryption started yeah?
Sent from my SM-G928C using XDA Free mobile app
Click to expand...
Click to collapse
Exactly, and successfully completed. Rebooted into boot logo, spent some time there, then rebooted into the loop (couldn´t avoid remembering this LOL)
Downloading the stock rom from samobile. Shame it is really slow (3 hours left). Hope flashing with odin will work with a dead battery...
Ok.
For the reference, encryption is a big no-no for the Edge+, at least with the current tools.
I hope that someday a dev will pay attention to this matter and dedicate some time to make it work...
I simply lack the knowledge to make it work or even identify where the problem lies... sorry.
Here is how I got back:
Downloaded G928G stock ROM (currently AOJ4) from Sammobile;
Entered download mode, flashed it with Odin (to flash it just follow the steps to flash a custom recovery with odin, except you will choose the .md5 from the stock ROM);
Rebooted, asked for the encryption password. Proceeded with boot but stuck for a bit in a black screen with the blue LED on. Rebooted by itself, asked again for the encryption password. Let´s say it entered a kind of a soft bootloop;
Flashed Phillz recovery / arter97´s kernel again (basically had to root it again). Erased data, restored backup through Phillz recovery;
Rebooted and *almost* everything was there, except for my files (!!!)
I chose to backup through Phillz default option (backup to /sdcard)... I thought that would backup my files as well but, no?

Categories

Resources