Database Users

[Q] Motorola APX ATRIX 4g does not go

Motorola ATRIX 4g phone, and ATT is discharged and the battery during the update.
Now it is switched on, type "Failed to boot Nvflash 0x1000 Entering recovery mode."
APX Nvflash tried to start but windows 7 does not recognize the device manager did not even know.
What should I do? This field may improve through usb?
thank you

depending on where your phone ran out battery it may be a brick, or you may be able to recover it...
Take the battery out and put it back, then hold Volume down and boot the phone. IF you see "fastboot" (Press the up key) and hope you boot into fastboot mode
You can also press down to see if you can get to RSD....
If you can get to these 2 then you can recover your phone...If it gets stuck on starting nvflash and doesn't give you a menu then your phone is bricked.

No, that won´t work as he is stuck with an empty battery and if the phone won´t boot the battery won´t charge. Catch 22
Either charge the battery in your backup Atrix
or search for the "McGyver method", which means sacrificing a USB cable. Oh well...

What's wrong...........

psychephylax said:
depending on where your phone ran out battery it may be a brick, or you may be able to recover it...
Take the battery out and put it back, then hold Volume down and boot the phone. IF you see "fastboot" (Press the up key) and hope you boot into fastboot mode
You can also press down to see if you can get to RSD....
If you can get to these 2 then you can recover your phone...If it gets stuck on starting nvflash and doesn't give you a menu then your phone is bricked.
Click to expand...
Click to collapse
Battery charged 80% of the vol up + power does not respond to the power + vol down to either the Irish problem APX installed but nvflash RCM 0x4 version.
Could not be fixed some way because it would be urgent!
Non-root your phone and locked the bootloader, RSD does not come in!

noob troubleshooting
OK we all have to try read and fail. Atrix 4g with 2.3.6 Unlocked and rom manager, titanium backup attrix 2 boot strap. What I did. did search and found this great reading rom. Followed all the info. Reboot great. Works. OK all but it will not access data other than in wifi. email, browers both say no connection. I have gone back and tried to clear all data and load other ROM. Can't get any of the ROMS. to load. either through update.zip or named.zip. Here's the stupid part. It was a victory ROM v2.0 it was for a samsung captivate. the link brought me across and I didn't look at the top to see if it was a dang attrix. Any idea on which how to get at least the data to work other then the wifi? I can access the recovery mode and it will reload the VictoryROM but nothing else. As F Gump says Stupid is ..as stupid does.
appreciated

bazsyka said:
Battery charged 80% of the vol up + power does not respond to the power + vol down to either the Irish problem APX installed but nvflash RCM 0x4 version.
Could not be fixed some way because it would be urgent!
Non-root your phone and locked the bootloader, RSD does not come in!
Click to expand...
Click to collapse
I don't understand half of the things you wrote...
If you hold vol down and press power...Does your phone boot and go into fastboot mode? Yes/No (It will say "fastboot" and pressing Vol Down will cycle other options....Then you have to press Vol Up to enter into Fastboot mode)
If it's "NO" then when it does boot do you have any other options besides NvFlash? If yes then you can recover, if no then your phone is bricked.

Victory, and A2 Bootstrap? wont work on a 4G. Either you are in the wrong forum or you have managed to put A2 tools on a 4G, which shouldn't work, and apparently doesnt.
If you can get to CWM, put a copy of CM7 on the sd card, CWM flash it. clear caches. etc.
Hope it helps

I think I bricked my ZTE Blade C2 v809

Please help me. I am in a sort of panic right now.
I have a ZTE Blade C2 v809, sold here in Portugal as Meo Smart A12. It was rooted and working fine. I was however getting some error 24's trying to install apps. I thought this might have had to do with using Titanium Backup to remove TouchPal (I did make a backup first), so I decided to restore TouchPal. There were however some errors in the restore and it was stuck there, so I decided to reboot the phone.
Chaos. Now it wont boot. If I press the button normally, the phone boots, I see the android logo, the screen goes black (Not shutdown black, a sort of light black background) and nothing happens. If I try to boot into Recovery mode by holding the power button and the volume down key, I just get the android logo stuck there, nothing happens. If I hold the power button and the volume up key, I get the picture of that laying down android with the message error.
Any more info I must provide please tell me, I am desperate for a solution, If I lose this phone I wont be able to get another one.

Okay I fixed it. Turns out the recovery menu DID work if I waited for a long time and tapped the screen. Used the update.zip available from the site, and it works like a charm

Yay, I bricked my phone, too.
I did something similar, changed recovery-from-boot.p name to recovery-from-boot.p-bak and install-recovery.sh to install-recovery.sh-bak
Now the phone doesn't boot properly, in fact it's stuck in a boot loop:
>starts
>shows white ZTE logo on screen
>restarts
Tried connecting the phone via USB cable and used fastboot devices & adb devices commands, no devices found.
Also tried pressing "power + vol down" and "power + vol up", nothing. I can't enter recovery mode or bootloader.
Apparently the remaining way to get in it's trough the SD slot, or maybe there's another way.
I kindly ask for help, couldn't be possible that I ruined this cell phone so fast.
Ideas, somebody?

Zuk Z1 Soft Brick

Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.

triby said:
Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.
Click to expand...
Click to collapse
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?

Life Engineer said:
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?
Click to expand...
Click to collapse
thank you life engineer! No luck . I'll try to send it back. Thanks again for you're help. Much appreciated!

hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.

rusty96379 said:
hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.
Click to expand...
Click to collapse
How does the bootloop look like?

crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
The bootloop is just showing the ''ZUK logo'' in the middle of screen and "'powered by Android logo'' below,and the phone vibrates everytime it flashes these logos. I tried QFIL but it can only detects the unit on the first boot or first flash that is 2 secs. only from the time i press the power button, and then it disconnects and not detect the unit again. Does anyone know where can i find the scatter file , MTK ROM for zuk z1, i would like to try the SP flasher tool. Or if anyone have any idea how to solve this issue on lenovo zuk z1,pls. help.tnx

Can y get to fastboot ?

im facing the same problem after i had the stupid idea to lock the bootloader again, before that i flashed the phone successfully with the cm mod recovery and cm 13.
Has anyone found a solution to this ? or do i have to send it back ?
What i did exactly :
I locked the bootloader again and just to test it i tried flashing the recovery again , ofcourse it didn't work which was what i wanted.
Afterwards i rebootet the bootloader with sudo fastboot -i 0x2b4c reboot
now im stuck in a bootloop that i cant even stop , in other words i cant turn my phone off nor can i access the recovery or fastboot
Im feeling so stupid that i locked it again .... i will try to get into recovery after my phone ran out of battery but so far it looks quite bad...does anyone know if i will get a replacement even though it was my fault ? ( i don't need to say that it was my fault ..and the bootloader is now locked again )
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/

CPP11 said:
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/
Click to expand...
Click to collapse
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!

Need some help
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now

Any solution?!
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help
---------- Post added at 01:20 AM ---------- Previous post was at 01:08 AM ----------
Amen Ghazy said:
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now
Click to expand...
Click to collapse
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help

Please help , same problem
I am facing same issue too from 2 days. I didnt even try to flash custom roms or play with boot loader or recovery or anything. All of a sudden my phone entered boot loop. After two three bootloops phone is entering "12 apps optimized of 230 apps" mode, completing optimizing all apps and then failing to start apps, entering boot loop again.
Effort made so far to fix -
1) Went to recovery and cleared cache - didnt work
2) Went to recovery and did factory reset - factory reset did happen but boot loop didnt stop, I realized that factory reset happened because now its saying optimizing 120 apps instead of my 230 apps during the bootloop.
3) Went to recovery, Entered fast boot mode but not able to connect to PC. Fastboot devices is not showing anything. I made sure proper driver is installed after researching on XDA.
4) Went to recovery, Tried "Install update". Didnt install anything but browsed through folder structure and realized my data is intact
It will be great if someone can help me atleast recover my data before I handover phone to service center for fixing boot loop issue.

Same problem
crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
i have same problwm what to do plz help mme

Abhishekjain31291 said:
i have same problwm what to do plz help mme
Click to expand...
Click to collapse
Explain in detail

errecez1 said:
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!
Click to expand...
Click to collapse
The link is not accessible now. Can you let me know what you have done. My phone is in a boot loop now and showing only Logo and 'powered by Android' message. It keeps turning on and off again and again.

Guys when u are in fast boot mode .. pls install Twrp ... After insatlling that press power button abd vibration comes hold volum doen+volume up button at the same time ..
Then u will be getting recovery Twrp mode .. then connect it to pc and u will see internal srorage in pc...now u have to copy any rom to the phone and install it via Twrp ... Thats all

Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press POWER KEY only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
EDITED:
While connecting to pc and by pressing Volume key you also need to press Power key for 1 sec or 2 sec until it gets detected. Thanks addicted777 (for tip)

rajendra0072 said:
Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
Click to expand...
Click to collapse
I'm happy that my videos were helpful. Enjoy.

keeps vibrating showing logo again and again, neither won't turn off neither turn on till for so many hour until the charge is empty....

how to stop boot loop ??????
can you provide videos how to stop boot loop ??????

Help bricked my p8 lite

i tried rooting my phone huawei p8 lite but got stuck at installing super su now i cannot start my device ..i cannot boot into flash mode or recovery ..i need help ...it wont even charge

pepeline said:
i tried rooting my phone huawei p8 lite but got stuck at installing super su now i cannot start my device ..i cannot boot into flash mode or recovery ..i need help ...it wont even charge
Click to expand...
Click to collapse
What's your build number what version of supersu did you try to flash?
Shutdown your device, put your current build onto 'dload' folder in the sdcard and press the following key combo: POWER, VOL-UP & VOL-DOWN, it should enable automatic update process

amageek said:
What's your build number what version of supersu did you try to flash?
Shutdown your device, put your current build onto 'dload' folder in the sdcard and press the following key combo: POWER, VOL-UP & VOL-DOWN, it should enable automatic update process
Click to expand...
Click to collapse
My phone restarts right at the logo when i press power vol up and vol down

pepeline said:
My phone restarts right at the logo when i press power vol up and vol down
Click to expand...
Click to collapse
Shut it down amd press those 3 keys combo.. upon seeing Huawei Logo and vibration, release the Power key while holding the other 2... That ought to do it

Man, your phone is badly bricked. If you don't have at least access to fastboot, then you're screwed.

Good for me to I have the same problem. I was trying to get to stock ( I have made it several times), but the last time was a fail... The whole process of sending firmware was ok. then a reboot and brick.
Now the huawei screen and the short vibration appears and shutdown.
I was trying everything.
In device manager the phone is displayed as mobile devices \ volume f:\ (drive letter)
in connected devices the phone is detected as
hi6210sft
Phone is not detected in fastboot or ADB.

I met this problem yesterday(I hope the identical ). Because I have two booting animations, one from Vodafone, I guess I shutdown early during installation. It just froze. Then it didn't boot and stock recovery didn't help
My solution needs some recovery software like twrp. Press three buttons at the same time until twrp mode. Copy zip file for SuperSU to phone or sdcard, then flash it. After that my phone works again.
You mentioned that you cannot start recovery. Try more. After installing twrp, starting it is quite annoying. Sometimes it just doesn't start or stock recovery starts. An alternative way is to go to whatever mode, and try adb or fast boot to reboot to recovery. Pressing button requires techniques which j don't have

I can't enter TWRP non combination is working for me. Installing firmware using dload from sd card also.

okay if non of these worked you can try flashing the whole update.app file by fastboot..
tools you will need
1- download the official huawei firmware from the official site
2- download Huawei Update Extractor
3- download minimal adb and fastboot
check the unbricking chapter of this thread
Note: to get in fastboot make sure you connected your phone to computer and press the vol down and power down buttons.. if none of these worked your phone is hard bricked .-. .. try opening the phone and reconnecting the battery worked with someone
if you need any help just pm me or replay on this thread hope that help you

Ok thx. I have already opened the phone to reconnect the battery
And then I was trying the combinations;
Battery connected vol- +power - Huawei logo and vibration and shutdown, no fastboot
Battery disconnected, vol-+power and connecting cable to phone - the same
Battery disconnected combination vol + vol - + ppwer, with sd card dload, the same
Battery connected combination vol + vol - power, sd card dload, the same
Any other suggestions?
The phone is recognized in Windows in device manager as mobile device as volume with a letter, I cant change the drivers to the right ones. I can't enter the storage it's unrecognized format.

Any other suggestions?

mercom said:
Any other suggestions?
Click to expand...
Click to collapse
it is easy to suggest others.. I too advised you.. but today i am facing the same problem...
what I tried:
Reinstalling the same ROM using dload method
Upgrading to other ROM (using both dload and flashing 4 image method)
Downgrading
Restoring from the backup
At one point, the phone booted up all well except the Wifi Module... So I flashed another ROM and stuck again...

the worst thing that I don't have any connection to fastboot Each firmware installation method fails

mercom said:
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
Click to expand...
Click to collapse
yes, mine too... or I could say flashing succeeds but there's some problem with the boot partition... will get my phone today from the Customer Care and try again (if they can't repair).
you can try removing the back cover and unplugging the battery... that is one of the few things I will do today as I get my phone back..

mercom said:
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
Click to expand...
Click to collapse
ok made it back.. just flashed the boot.img from b594 (the one I was using when my mobile got bricked)... somehow made it back. But now I am having a problem with the battery. It doesn't charge when the device is switched on, only when the device is switched off... will see for few days, if there's problem will take it back to service centre again

I have already removed back cover and was trying to reconnect the battery to do clear run. But the only thing is discovered in windows is a driver for storage and I can't change the driver to ADB or FASTBOOT
Now I have connected phone w PC on adb devices I see only emulator-5554 device. In Device manager I see the storage as a Mobile Device.
Nope it was Bluestacks

mercom said:
I have already removed back cover and was trying to reconnect the battery to do clear run. But the only thing is discovered in windows is a driver for storage and I can't change the driver to ADB or FASTBOOT
Now I have connected phone w PC on adb devices I see only emulator-5554 device. In Device manager I see the storage as a Mobile Device.
Nope it was Bluestacks
Click to expand...
Click to collapse
Switch off your device and then connect it to PC but just hold the volume- key.. that should get you in fastboot mode... I did that and then flashed the boot.img of the current ROM. This should boot it up...

Nope it doesn't work I was trying it already

Instantly reboots after booting into recovery

I installed LineageOS 14.1 but I was having some blue screens so I decided to go back to stock ROM but I had a brainfart and rebooted after wiping everything except microSD, and now I can't boot my phone normaly, nor enter recovery mode or download mode.
What is happening with TWRP recovery mode is that it seems to load properly but then it doesn't give me options or anything it just starts formatting cache or something for like 2 seconds and then just tries to reboot normally, but there's no OS so it just gives me a blue screen(im not at home right now but im panicking, i will upload a video for better understanding in a couple hours).
And with download mode it just stays on the charging screen.
Did I just brick my ****ing phone? Im on the verge of tears, I have been watching videos and reading for the past 2 hours and nothing seems to help

Patala1 said:
I installed LineageOS 14.1 but I was having some blue screens so I decided to go back to stock ROM but I had a brainfart and rebooted after wiping everything except microSD, and now I can't boot my phone normaly, nor enter recovery mode or download mode.
What is happening with TWRP recovery mode is that it seems to load properly but then it doesn't give me options or anything it just starts formatting cache or something for like 2 seconds and then just tries to reboot normally, but there's no OS so it just gives me a blue screen(im not at home right now but im panicking, i will upload a video for better understanding in a couple hours).
And with download mode it just stays on the charging screen.
Did I just brick my ****ing phone? Im on the verge of tears, I have been watching videos and reading for the past 2 hours and nothing seems to help
Click to expand...
Click to collapse
To boot into download mode, you must first turn it off then connect your phone to pc and then long press power up button.
As with the twrp formatting cache or something like that, you must have downloaded a buggy version. For now, if you have a pc nearby try to boot into twrp with adb.

mayankjet said:
To boot into download mode, you must first turn it off then connect your phone to pc and then long press power up button.
As with the twrp formatting cache or something like that, you must have downloaded a buggy version. For now, if you have a pc nearby try to boot into twrp with adb.
Click to expand...
Click to collapse
Download mode still isn't working with the computer im trying, are you saying I just have to turn it off, plug it into the pc(charging screen appears), and just hold power button alone until I get to DL mode? Does my computer need a specific driver already installed for this?
And how would I go about giving my phone commands with adb if I can't boot it into anything? Should my pc recognize the device and be able to use adb when it's in the blue "Subsystem Crash" screen, or maybe when in the first 2 screens before booting into recovery where you have to press "Yes" twice, or when? Maybe when it's charging?
Thanks a lot for the help

Patala1 said:
Download mode still isn't working with the computer im trying, are you saying I just have to turn it off, plug it into the pc(charging screen appears), and just hold power button alone until I get to DL mode? Does my computer need a specific driver already installed for this?
And how would I go about giving my phone commands with adb if I can't boot it into anything? Should my pc recognize the device and be able to use adb when it's in the blue "Subsystem Crash" screen, or maybe when in the first 2 screens before booting into recovery where you have to press "Yes" twice, or when? Maybe when it's charging?
Thanks a lot for the help
Click to expand...
Click to collapse
Yes, you need to turn off your phone and plug the usb cable in your phone while holding volume up button until it goes into download mode( you must connect it to a pc or laptop). Also, you don't need specific drivers for that.
To boot into twrp with adb, you must first boot into os, or boot into twrp with hardware keys, assuming you can't do any of these then your only option is flashing a new kdz via download mode.
Edit: You need adb drivers installed on your pc if you're going to use adb commands on your pc.

mayankjet said:
Yes, you need to turn off your phone and plug the usb cable in your phone while holding volume up button until it goes into download mode( you must connect it to a pc or laptop). Also, you don't need specific drivers for that.
To boot into twrp with adb, you must first boot into os, or boot into twrp with hardware keys, assuming you can't do any of these then your only option is flashing a new kdz via download mode.
Edit: You need adb drivers installed on your pc if you're going to use adb commands on your pc.
Click to expand...
Click to collapse
Fixed it, thank you a lot my friend, saved my ass

Patala1 said:
Fixed it, thank you a lot my friend, saved my ass
Click to expand...
Click to collapse
:good:

OK I have added the fix in guide