How to flash Huawei Y300 with official rom - Ideos S7 General

Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards

Hi,
same method as old models :
Check phone version / exact sub-model, here are three hardware versions of Y300:
1.Huawei Y300 (T8833) - TD-SCDMA / China Mobile
2.Huawei Y300-0000 (U8833) - WCDMA China Unicom
3.Huawei Y300-0100 (U8833) - WCDMA International
check version (product ID) with this code : *#*#1357946#*#* , dial button (green)
there is international version ROM - Y300-0100 at Huawei site, you probably downloaded it ...
- put "dload" folder from archive on formatted micro-sd card's ROOT
- put micro-sd card into phone
- start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
- wait for finish ...
p.s. if not accepting firmware - means it's not international version ....
b.r.
Alex

If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.

what is the latest firmware update for Huawei y300
what is the latest firmware update for Huawei y300? i have the software versio V100R001C151B165 is this the latest update?
please update

i backed up my imei but deleted the folder i try to backup again and it says its already backed up ??

How to restore Imei
I didn't understood woht ot restore my imei. Could you explain it completely?

HUAWEII Y300-0000 question
Hi,
I have HUAWEII Y300-0000 phone I've bought in china.
Managed to unlock it thanks to your manual.
It comes with ROM: Y300-0000V100R00C17B180 (Android 4.1.1).
The only problem I have is that sometimes when I try to dial I do not manage to establish call (the call is tried to be established and then disconnects). When this happens there is also problem in incoming calls. I manage to receive the incoming call but when answered the connection drops after several seconds.
My question is whether this is an issue you are familiar with.
If so, do you have any suggestions?
Are there any new ROMs for this version that maybe handle these kind of issues.
How can I install new ROM on already rooted phone?
Thanks in advance

tamirgz said:
Hi,
I have HUAWEII Y300-0000 phone I've bought in china....
Click to expand...
Click to collapse
Have the same problem - could I instal there soft for Y300-0100 after unlock bootloader?

Can you tell me how do I "zero" the Y300 IMEI? I have one that was left without system and now I can't flash the
HUAWEI_Y300_firmware(Y300-0100,Android 4.1,Emotion_UI,V100R001C00B175,Normal,05011FKA)
Now I can't revive my Huawei?
Thanks
OmenHTX said:
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
Click to expand...
Click to collapse

I tried the official one but the performance is very low:crying::crying::crying::crying:

Ram Expander on Huawei Asend Y300
I rooted my phone it works properly. Everything working fine. I just have have one problem that how to expand its ram. Plz tell me.
I tried with 2gb class 6 card with swalpt expander but it show nothing in it.

Huawei Y300 Ram Expander
Plz tell me how to expand ram of Huawei Ascend Y300.

babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
hi there, i believe you can only flash the official firmware upgrades from a official ROM because when you check for upgrades to the firmware it gives you a option to install from local storage which i have yet to see in a custom ROM. in future i would always recommend a backup before installing any other ROM

hey someone flashed the official rom successfully?

zeroing imei
can you write how to zero imei code

flashing huawei y300. if you can upload any ctock or custom ro who i can install in
mobilexpert said:
Hi,
same method as old models :
Check phone version / exact sub-model, here are three hardware versions of Y300:
1.Huawei Y300 (T8833) - TD-SCDMA / China Mobile
2.Huawei Y300-0000 (U8833) - WCDMA China Unicom
3.Huawei Y300-0100 (U8833) - WCDMA International
check version (product ID) with this code : *#*#1357946#*#* , dial button (green)
there is international version ROM - Y300-0100 at Huawei site, you probably downloaded it ...
- put "dload" folder from archive on formatted micro-sd card's ROOT
- put micro-sd card into phone
- start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
- wait for finish ...
p.s. if not accepting firmware - means it's not international version ....
b.r.
Alex
Click to expand...
Click to collapse
if you can upload any custom or stock rom who i can install in stock recowery for huawei y300(recowery name is .android system recowery<3e>

huawei y300 flashing
OmenHTX said:
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
Click to expand...
Click to collapse
how to get or hack bootloader code if my phone is bricked.
or
if you can upload any custom or stock rom to install in stock recowery(i can go to recowery and i can force upgrade but fails at step 2/2).
recowery name is ''android system recowery <3e>''.
or if i can instal any custom recowery now i install rom trought this custom recowery.
WRITE ANY OPTION TO WAKE UP MY PHONE.

falshing huawei y 300
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
i install chainfire 3d and when i instaling driver my phone is shut down and i can wake up him from that it only show huawei ascend logo i can go to stock recowery and i can force upgrade but fail at ste 2 can you fix it

Unlockin Huawei Y300
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=BBliIomdLOI
You can unllock bootloader like this see on video
Sigma-key app

Ateeq Rana said:
Plz tell me how to expand ram of Huawei Ascend Y300.
Click to expand...
Click to collapse
Search playstore I forget the excat name of the app. I used swapit(the name has changed now I forget the name) this uses your sd card as ram but do take note that the more u use your sd card the quicker it can go bad.

Related

Huawei P9 lite VNS-L31C900B055-log not receiving updates

Hi Guys, I m from Pakistan, i m using Huawei P9 lite VNS-L31 C900 B055, but it have been facing some problems with my phone and now i want to put new firmware on it. i have searched for latest firmware but it is not available for C900 B055 instead i have found C432B161. Now i have some questions to be answered.
1. Can i put C432B161 in my phone however my phone build number is VNS_L31 C900 B055?
2. Is there any to upadate my phone?
3. What problems i can face, if put C432B161 in my phone?
i hope you guys would help me.:good::good:
Thanks.
1. Can i put C432B161 in my phone however my phone build number is VNS_L31 C900 B055?
2. Is there any to upadate my phone?
3. What problems i can face, if put C432B161 in my phone?
Hello
You bought it with this firmware vns-l31c900b055?
Have you double sim?
For you question
1: try
2: I think that the phone will update
3: I think Dload blocks a 5% fail and it will restart c900b055 or dload 100% success c900b161 or c432b161.
Network problem, I do not think so.
To Pakistan c636 no ?
VNS-L31C636B170 (11/12/2016) http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66528/f1/full/update.zip
May be between another opinion
Yes. Its a dual sim phone. But its not based on Pakistan. Its been gifted to me. No update has been found yet
AwiKhan said:
Yes. Its a dual sim phone. But its not based on Pakistan. Its been gifted to me. No update has been found yet
Click to expand...
Click to collapse
Digit on dialer of your p9 lite: *#*#2846579#*#*
You will enter in Project Menu there press on: 3.Network Information Query >4.Vendor Country Info, and write here what it says in
Vendor:
Country:
...
SevenSlevin said:
Digit on dialer of your p9 lite: *#*#2846579#*#*
You will enter in Project Menu there press on: 3.Network Information Query >4.Vendor Country Info, and write here what it says in
Vendor:
Country:
...
Click to expand...
Click to collapse
it shows
vendor: hw
country: normal
AwiKhan said:
it shows
vendor: hw
country: normal
Click to expand...
Click to collapse
You can unlock bootloader, change oeminfo and put a new firmware: http://forum.xda-developers.com/huawei-p9lite/development/europe-vns-l31-toolkit-bootloader-t3432873
hello
In your title it is written vns-l31c900b055-log. In this firmware version, are there any applications? Beta-test or other to know
Chisetdel31260 said:
hello
In your title it is written vns-l31c900b055-log. In this firmware version, are there any applications? Beta-test or other to know
Click to expand...
Click to collapse
yeah bro, it has an app named beta club(overseas). it is very irritating.
what this app is used for??
hello
I made the reflection because I had downloaded vns-l31c432b103-log, it is its 2 or 3 three months and there was a beta-test app.
I conclude that you have a test version that dates from the month of March. Have you installed c432b161 is the best, I think
Beta-test
It is an application, which is used to communicate errors in the functioning of the phone to huawei, it must be registered therefore not great interest for it version b055 Viewed this link we already talked about it
http://forum.xda-developers.com/hua...ndroid-nougat-dev-build-huawei-t3488360/page8

Honor 8 Lite CN version to nordic?

Hi,
I have a Honor 8 Lite from china that i would like EU/Nordic firmware in. I have problem with what files I should use, and also the meaning of saving OEM info.
I have unlocked boot loader and installer TWRP, what is the next step?
Would appreciate any help! Thanks.
Model: PRA-AL00
MeXii said:
Hi,
I have a Honor 8 Lite from china that i would like EU/Nordic firmware in. I have problem with what files I should use, and also the meaning of saving OEM info.
I have unlocked boot loader and installer TWRP, what is the next step?
Would appreciate any help! Thanks.
Model: PRA-AL00
Click to expand...
Click to collapse
You can flash custom ROM..
MeXii said:
Hi,
I have a Honor 8 Lite from china that i would like EU/Nordic firmware in. I have problem with what files I should use, and also the meaning of saving OEM info.
I have unlocked boot loader and installer TWRP, what is the next step?
Would appreciate any help! Thanks.
Model: PRA-AL00
Click to expand...
Click to collapse
Do you want to debrand to some other region? If so, you need to have oeminfo file of that variant and then download the files for new model and flash but unless you have the oeminfo file you can not proceed further.
It will be the similar process mentioned in my signature for debranding and just a change of respective files
tried
hassanjavaid8181 said:
You can flash custom ROM..
Click to expand...
Click to collapse
hi I have the same problem. i tried to flash a linaegeOS but when I restart the phone the screen is black.
I tried to flash even elite rom. but twrp give me error 6.
does anyone have the oem info file for honor 8 lite?
crt416 said:
hi I have the same problem. i tried to flash a linaegeOS but when I restart the phone the screen is black.
I tried to flash even elite rom. but twrp give me error 6.
does anyone have the oem info file for honor 8 lite?
Click to expand...
Click to collapse
You try to flash elite ROM for honor 6x??
No i tried to flash elite rom from below link:
https://forum.xda-developers.com/8-lite/development/elite-rom-elite-rom-v5-1-honor-8-lite-t3698086
I flashed the region patch, and now in model info, I have generic id a15 and version fw nrd90m test-keys. After this step I tried to flash elite rom but I receive error 6.
I'd like to change generic regional id with an international id and after try to put in an European stock fw
crt416 said:
No i tried to flash elite rom from below link:
https://forum.xda-developers.com/8-lite/development/elite-rom-elite-rom-v5-1-honor-8-lite-t3698086
I flashed the region patch, and now in model info, I have generic id a15 and version fw nrd90m test-keys. After this step I tried to flash elite rom but I receive error 6.
I'd like to change generic regional id with an international id and after try to put in an European stock fw
Click to expand...
Click to collapse
solve your issue?
No yet, I'm stuck in NRD90M TEST-KEYS
Rommco05 said:
You need to install zip data but I'm not sure if it is a firmware for this phone
Click to expand...
Click to collapse
Problem solved big thanks to @Akam_bad.
crt416 said:
Problem solved big thanks to @Akam_bad.
Click to expand...
Click to collapse
Hi bro i deleted my telegram account now registered again
My id
http://t.me/just_myself_know
MeXii said:
Hi,
I have a Honor 8 Lite from china that i would like EU/Nordic firmware in. I have problem with what files I should use, and also the meaning of saving OEM info.
I have unlocked boot loader and installer TWRP, what is the next step?
Would appreciate any help! Thanks.
Model: PRA-AL00
Click to expand...
Click to collapse
Saving oem info: do a backup in TWRP. Copy backup to pc or sd.
Twrp backup of pra-la1c185b165
https://mega.nz/#!4bhkRDiA!WPFFffQr17KjgrfoyPn7KHNVbthDHALp54Pgms43jkY

Huawei p9 lite update problem

I bought Huawei p9 lite vns l31, and i used firmware finder app and update it through ERecovery mod, then my P9 lite changes to the Chinese version vns-aloo.
Please would anyone help me get my p9 lite VNS-L31 back?
Ameeiin said:
I bought Huawei p9 lite vns l31, and i used firmware finder app and update it through ERecovery mod, then my P9 lite changes to the Chinese version vns-aloo.
Please would anyone help me get my p9 lite VNS-L31 back?
Click to expand...
Click to collapse
Hello,
this happened because you
choose that firmware...
you are very lucky you didn't bricked your device.
You could try to use Firmware Finder again
to revert back to your previous version,
but as i told, you could brick it,
that's your choice.
Another way is unlock the bootloader,
install a custom recovery (TWRP),
flash an OEMinfo file and your correct firmware.
It depends on the android version,
on the region (CUST) in which you live
or for which the firmware has been released
and if the device is single or dual sim.
Good luck dude !
P.S.: took a look and it seems
the link for Hassan's twrp download
is no longer available...
Maybe other twrps are still available,
but i'm pretty sure someone could
repost it for you...
I have tried to reinstall it to my previous version, but it didn't work.
The model does not have an oem unload option in t
Dadditz said:
Hello,
this happened because you
choose that firmware...
you are very lucky you didn't bricked your device.
You could try to use Firmware Finder again
to revert back to your previous version,
but as i told, you could brick it,
that's your choice.
Another way is unlock the bootloader,
install a custom recovery (TWRP),
flash an OEMinfo file and your correct firmware.
It depends on the android version,
on the region (CUST) in which you live
or for which the firmware has been released
and if the device is single or dual sim.
Good luck dude !
P.S.: took a look and it seems
the link for Hassan's twrp download
is no longer available...
Maybe other twrps are still available,
but i'm pretty sure someone could
repost it for you...
Click to expand...
Click to collapse
I ha
Dadditz said:
Hello,
this happened because you
choose that firmware...
you are very lucky you didn't bricked your device.
You could try to use Firmware Finder again
to revert back to your previous version,
but as i told, you could brick it,
that's your choice.
Another way is unlock the bootloader,
install a custom recovery (TWRP),
flash an OEMinfo file and your correct firmware.
It depends on the android version,
on the region (CUST) in which you live
or for which the firmware has been released
and if the device is single or dual sim.
Good luck dude !
P.S.: took a look and it seems
the link for Hassan's twrp download
is no longer available...
Maybe other twrps are still available,
but i'm pretty sure someone could
repost it for you...
Click to expand...
Click to collapse
Tnx bro but I have tried reinstalling my previous version two times, but it didn't work.
In this case, the oem unlock toggle is missing, so please is there any way to unlock the bootloader without it?
Ameeiin said:
the oem unlock toggle is missing
Click to expand...
Click to collapse
Chinese firmware doesn't have oem unlock option, it's normal.
-Alf- said:
Chinese firmware doesn't have oem unlock option, it's normal.
Click to expand...
Click to collapse
So now what will I do please?
Ameeiin said:
So now what will I do please?
Click to expand...
Click to collapse
Look here .
Ameeiin said:
the oem unlock toggle is missing
Click to expand...
Click to collapse
btw, it's an advantage
-Alf- said:
Look here .
btw, it's an advantage
Click to expand...
Click to collapse
Thanks
Can i use my android phone to unlock the bootloader without pc?
Ameeiin said:
Can i use my android phone to unlock the bootloader without pc?
Click to expand...
Click to collapse
No.
At least up to my knowledge, it is impossible to get the code without a PC (more precisely, you can unlock BL without PC only if you have the unlock code).
-Alf- said:
No.
At least up to my knowledge, it is impossible to get the code without a PC (more precisely, you can unlock BL without PC only if you have the unlock code).
Click to expand...
Click to collapse
Ok, So please where can I get the unlock code?
Ameeiin said:
I bought Huawei p9 lite vns l31, and i used firmware finder app and update it through ERecovery mod, then my P9 lite changes to the Chinese version vns-aloo.
Please would anyone help me get my p9 lite VNS-L31 back?
Click to expand...
Click to collapse
I have an idea, can i flash it with Huawei p9 lite firmware?
Ameeiin said:
I have an idea, can i flash it with Huawei p9 lite firmware?
Click to expand...
Click to collapse
You can try flash it with Service ROM Download . Type VNS-L31, or VNS- .
Download correct firmware - EMUI version, Cxxx (the bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download. Select your previous Cxxx, not current C00 ) and single/dual SIM (all firmwares that end with even numbers are for dual SIM, odd numbers are for single SIM).
Instructions can be found in 'ReleaseDoc' folder.
If you cannot unpack downloaded zip archive on PC, unpack it in the internal memory using this RAR apk.
Extracted 'dload' folder copy/transfer to the SD card. Good luck.
-Alf- said:
You can try flash it with Service ROM Download . Type VNS-L31, or VNS- .
Download correct firmware - EMUI version, Cxxx (the bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download. Select your previous Cxxx, not current C00 ) and single/dual SIM (all firmwares that end with even numbers are for dual SIM, odd numbers are for single SIM).
Instructions can be found in 'ReleaseDoc' folder.
If you cannot unpack downloaded zip archive on PC, unpack it in the internal memory using this RAR apk.
Extracted 'dload' folder copy/transfer to the SD card. Good luck.
Click to expand...
Click to collapse
I forgot the last cxxx of the build number, but the model is l31 for sure, dual sim and comes with Android version 6.0, EMUI 4.1
There's no Service ROM for EMUI 4.1 , you have to flash UPDATE.APP file.
Ameeiin said:
I forgot the last cxxx of the build number
Click to expand...
Click to collapse
where are you from if I may ask?
Just to be sure - on this website you can get info about target country (Country , Valid for..., Supported country...)
-Alf- said:
There's no Service ROM for EMUI 4.1 , you have to flash UPDATE.APP file.
Can you explain to me in detail please?
Click to expand...
Click to collapse
where are you from if I may ask?
Just to be sure - on this website you can get info about target country (Country , Valid for..., Supported country...)
[/QUOTE]
Nigeria
Ameeiin said:
Nigeria
Click to expand...
Click to collapse
I think it's C636 , but I'm not sure.
Any forced flash with wrong region will bring your phone to C900 (global) or will brick your phone.
I can't help you anymore, sorry...
Ok thanks.
I can't help you anymore, sorry...
[/QUOTE]
-Alf- said:
I can't help you anymore, sorry...
Click to expand...
Click to collapse
-Alf- said:
I can't help you anymore, sorry...
Click to expand...
Click to collapse
But why if you doesn't mind.
Ameeiin said:
why
Click to expand...
Click to collapse
if you don't know what your default region is, and without a PC it's just Russian roulette .

P10 Lite (WAS-TL10) Stock ROM files

Hello all,
I'm looking for the stock rom (EMUI 5.0/Android 7.0) firmware files for my newly acquired P10 Lite (WAS-TL10).
Bought it at AliExpress, was supposed to ship with Android 7.0, but got Android 8.0 on it.
Unfortunately I need Android 7 for the sole purpose of verifying some Huawei allegations in which they pretend my app is not working properly with HMS Core version lower than 2.5.3! A version you can't find anywhere on any devices, but those Huawei phones running Android 7.0!
I say they pretend because they've made-up all kind of new rules for the past months to just prevent my apps from being published in China, as explained here: https://www.3c71.com/android/?q=node/2784
Any help would be much appreciated.
This is the only Android 7 Stock firmware I could find:
Huawei P10 Lite Dual
Mohamedkam000 said:
This is the only Android 7 Stock firmware I could find:
Huawei P10 Lite Dual
Click to expand...
Click to collapse
Thanks but the download link doesn't work at all. I've found hundredth of such links but none works. This one ends-up with 'an error occured'.
Is it the same for you or are you able to download the file?
3c said:
Thanks but the download link doesn't work at all. I've found hundredth of such links but none works. This one ends-up with 'an error occured'.
Is it the same for you or are you able to download the file?
Click to expand...
Click to collapse
I'm sorry, I should've checked the link first, it seems like these files were removed from Huawei servers, however, there's AFH which, luckily, has the nougat firmware.
P10 Lite Nougat 7.0
Null
3c said:
Hello all,
I'm looking for the stock rom (EMUI 5.0/Android 7.0) firmware files for my newly acquired P10 Lite (WAS-TL10).
Bought it at AliExpress, was supposed to ship with Android 7.0, but got Android 8.0 on it.
Unfortunately I need Android 7 for the sole purpose of verifying some Huawei allegations in which they pretend my app is not working properly with HMS Core version lower than 2.5.3! A version you can't find anywhere on any devices, but those Huawei phones running Android 7.0!
I say they pretend because they've made-up all kind of new rules for the past months to just prevent my apps from being published in China, as explained here: https://www.3c71.com/android/?q=node/2784
Any help would be much appreciated.
Click to expand...
Click to collapse
Try to downgrade to Nougat using Hisuite (official and safe way to do the downgrade). A7 firmware will not help you, there's no way downgrade (with locked bootloader) . Try chinese Hisuite :
https://mega.nz/file/1p9xyIRL#bx1M6zXqtrR38okQd4YqkYvmLfRaOBDJ2snjd8W7kqk
If the rollback option is not available with your HiSuite ("switch to the older version" or "Earlier version"), you must downgrade to the lower Oreo build version number doing the dload method (flashing Service ROM for your model and region).
Hi...
Like @-Alf- said you can try it this way. If it doesn't work for you. Search this forum for Service Rom to downgrade from emui 8 to emui 5. But be carefully by using any method. Make a full Backup of your System before doing any change. If you will downgrade to emui 5 for unlocking the bootloader. Better think about to use the Dc-unlocker for that. It will cost 4€ to get the unlock code. But its without risk to brick your device and it doesn't waste time to get it. You need to choose wat is more important for you.
So good luck
solong
speedson
Thanks all, I was able to downgrade to EMUI 5.1, which allowed me testing very old HMS Core (2.5.2) somehow and its upgrade mechanism. Not sure I needed that device as it seems EMUI 5.1 didn't come with AppGallery at all, LOL.
Now I'd like to upgrade back to sell the device, but I haven't found a way to do so... Hi Suite tells me device is up-to-date, and OS system update tells me the same
3c said:
Thanks all, I was able to downgrade to EMUI 5.1, which allowed me testing very old HMS Core (2.5.2) somehow and its upgrade mechanism. Not sure I needed that device as it seems EMUI 5.1 didn't come with AppGallery at all, LOL.
Now I'd like to upgrade back to sell the device, but I haven't found a way to do so... Hi Suite tells me device is up-to-date, and OS system update tells me the same
Click to expand...
Click to collapse
What is your build number? (Settings > About phone )
-Alf- said:
What is your build number? (Settings > About phone )
Click to expand...
Click to collapse
Build number is WAS-TL10C636B187
I found a firmware, but it doesn't seem compatible ( Warsaw-TL10HK 8.0.0.371(C636)_Firmware_8.0.0_r1_EMUI8.0_05014HTC ) because upgrade says there is no update file on SD when I put the dload folder on it.
EDIT: That firmware contained zip files instead of .app, so I extracted the .app files and recreated the expected structure, and it processed the update using OS menu ( *#*#2846579#*#* ).
If any-one need the modified file, let me know.
3c said:
Build number is WAS-TL10C636B187
I found a firmware, but it doesn't seem compatible ( Warsaw-TL10HK 8.0.0.371(C636)_Firmware_8.0.0_r1_EMUI8.0_05014HTC ) because upgrade says there is no update file on SD when I put the dload folder on it.
Click to expand...
Click to collapse
Have you tried to upgrade via eRecovery & Wi-Fi?
-Alf- said:
Have you tried to upgrade via eRecovery & Wi-Fi?
Click to expand...
Click to collapse
No idea what that is lol.
After modifying the dload folder to have .app files (instead of .zip), the phone took the upgrade (editing previous post). New build number is WAS-TL10 8.0.0.371(C636).
I can now upgrade/downgrade between Android 7 and 8 for testing. That's pretty useful, so thanks to all.
3c said:
Build number is WAS-TL10C636B187
I found a firmware, but it doesn't seem compatible ( Warsaw-TL10HK 8.0.0.371(C636)_Firmware_8.0.0_r1_EMUI8.0_05014HTC ) because upgrade says there is no update file on SD when I put the dload folder on it.
EDIT: That firmware contained zip files instead of .app, so I extracted the .app files and recreated the expected structure, and it processed the update using OS menu ( *#*#2846579#*#* ).
If any-one need the modified file, let me know.
Click to expand...
Click to collapse
Hi, i was searching for emui 8 for p10 lite but couldn't find any, do you still have the modified file for p10 was-tl10. It would be greatly appreciated, Thanks
UBA Tutorials said:
Hi, i was searching for emui 8 for p10 lite but couldn't find any, do you still have the modified file for p10 was-tl10. It would be greatly appreciated, Thanks
Click to expand...
Click to collapse
Hi...
keep attention that 3c is writing about his Warsaw-TL10HK 8.0.0.371(C636) that C636 said...it is a Firmware for Asian Region. Be sure you asking for the correct firmware that matching your Device.
solong
speedson
Hi thank you for telling me about this, I have c636 rom installed on my phone specifically (was-tl10 c636b180) asian pacific. Will flashing my phone with same model but with different region brick my device brick? Also Can you please tell me what Warsaw means. Thanks
UBA Tutorials said:
Hi thank you for telling me about this, I have c636 rom installed on my phone specifically (was-tl10 c636b180) asian pacific. Will flashing my phone with same model but with different region brick my device brick? Also Can you please tell me what Warsaw means. Thanks
Click to expand...
Click to collapse
WARSAW is the Name of the Phone...an p8 lite 2017 is called Prague or an Samsung S6 Edge is called zerolte
If you try to flash a firmware with another Region like C432 for Europa on a Device with C636 Asian Region...the verifying of the Update Package will not pass and update proceed will abort.
If you want to change the Region of the Device you need to use HWOTA Method for that...in the Script during configuration comes the Question to change firmware or to change location.
But be carefull by changing the Region cause the Devices for the different Regions could have different hardware integrate. Hardware like modem and so^^
OK thank you, i think modified firmware provided by 3c will work on my device as is has the same code of region c636 and the firmware flashed on my device is Asian pacific (c636)
speedson said:
WARSAW is the Name of the Phone...an p8 lite 2017 is called Prague or an Samsung S6 Edge is called zerolte
If you try to flash a firmware with another Region like C432 for Europa on a Device with C636 Asian Region...the verifying of the Update Package will not pass and update proceed will abort.
If you want to change the Region of the Device you need to use HWOTA Method for that...in the Script during configuration comes the Question to change firmware or to change location.
But be carefull by changing the Region cause the Devices for the different Regions could have different hardware integrate. Hardware like modem and so^^
Click to expand...
Click to collapse
speedson said:
to change the Region of the Device you need to use HWOTA Method for that..
Click to expand...
Click to collapse
Jfyi, the Huawei update server is down since February, so Firmware Finder is dead. Therefore, it is also not possible to use HwOTA or HuRupdater (unless someone has the necessary files stored on the disk).
Regards
-Alf- said:
Jfyi, the Huawei update server is down since February, so Firmware Finder is dead. Therefore, it is also not possible to use HwOTA or HuRupdater (unless someone has the necessary files stored on the disk).
Regards
Click to expand...
Click to collapse
Hi...
follow the Link to my Google Drive and feel free to download the Package and the Tool.
the firmware package ist for 8.0.0.b398C432 WAS-LX1A
HWOTA - Google Drive
drive.google.com
solong
speedson
speedson said:
Hi...
follow the Link to my Google Drive and feel free...
Click to expand...
Click to collapse
Do you also have the files for Was-tl10 c636?

Update P9 Lite from Android 6 to 7

Hello everyone, I have a P9 Lite which was issued from Vodafone Europe (originally VNS-L21C02B128), and I'd like to update it to Android 7.
Since none of the stock ROMs I tried would pass the verification when updating via the Project Menu, I found and flashed a newer Android 6 which works fine apparently - build number is currently VNS-L21C900B170.
Trouble is all of the newer ROMs are still not working. During the verification phase, it says they are not compatible with the phone.
Any ideas what is the simplest safest way to get to Android 7 ? Thanks for the help.
P9Late said:
Since none of the stock ROMs I tried would pass the verification
Click to expand...
Click to collapse
Have you tried Service ROMs?
https://androidhost.ru/3za
https://androidhost.ru/56i
P9Late said:
originally VNS-L21C02B128), and I'd like to update it to Android 7.
Click to expand...
Click to collapse
- Unlock the bootloader
- on android 6 rebrand to C432 global
- in TWRP install fullOTA-MF-PV VNS-L21C432B370
- then you can upgrade to a higher version by installing a Service ROM via dload method (it will lock your BL again).
The problem is probably with your current build number - the C900 is fake firmware, incomplete or incompatible. I'm afraid you won't be able to unlock the bootloader or rebrand the phone with this build.
Hello Alf, I did try VNS-L21C02B346 but it didn't work, both with the original and the newer ROM. I also tried the "SERVICE Full Repair VNS-L21 C432B381" from here, also with no luck.
The current B170 ROM was labeled as "VNS-L21C432B170" on the site I got it from, but now it shows as C900. This one updated with no problems via the Project Menu upgrade command, the only one to work so far...
I will see later about unlocking the bootloader thanks.
P9Late said:
The current B170 ROM was labeled as "VNS-L21C432B170"
Click to expand...
Click to collapse
You can't install C432 on C02 and vice versa without changing oeminfo, that's why you now have a C900 region and failed verification.
Thanks but I don't know hot to change oeminfo. Can I use SRK Tool ?
Also is there a free way to unlock the bootloader ? Is it this one ?
Does the phone have to be dissasembled, or is there a software method as well ?
Is dc-unlocker free for phones with android 6 and 7 ?

Categories

Resources