hey u all
my phone is a brick ...:crying:
jast used RSD Lite and the .SBF pass = ok but when the motorola defy try to move on the computer says "usb unrecognized"
what can i do from here ? please help me its an emergency.
tnx alot :good:
the screen is black\not responding when i push the power on ... im not geting the motorola logo :crying:
what can i do ?
only the power light is on when im charging the phone...
please help me :good:
Pic status of my motorola defy
The phone is jammed like this - please what can i do ?
Can you boot into bootloader? (Power + Volume up)
Install motorola drivers for pc, install rsd, enter the bootloader with power+volume up buttons like xiihyou said, then connect your phone via usb to pc and start the rsd proces flashing....
Should Help
The same happen to me , solution is simple .....
Just Install drivers ( HERE http://forum.xda-developers.com/showthread.php?t=1100585)
Pull out battery, now put it back with Power button and Volume up pressed together
you should be in bootloader mode
Now choose the right SBF file for your Phone .....
After you Defy boots up, Shut it down -> wipe data and cache ( Press Power button and Volume Down)
And now your mobile should be OK
xiiihyou said:
Can you boot into bootloader? (Power + Volume up)
Click to expand...
Click to collapse
no..what can i do from here ?
tnx ?
yzeroy said:
The same happen to me , solution is simple .....
Just Install drivers ( HERE http://forum.xda-developers.com/showthread.php?t=1100585)
Pull out battery, now put it back with Power button and Volume up pressed together
you should be in bootloader mode
Now choose the right SBF file for your Phone .....
After you Defy boots up, Shut it down -> wipe data and cache ( Press Power button and Volume Down)
And now your mobile should be OK
Click to expand...
Click to collapse
did that but still cant get the phone into bootloader
the phone is connected to the computer (usb) but there is only a white light on the top screen that it :crying:
please help me what can ido from here ?
tnx alot.
i had a similar problem, i couldn t turn on the phone or enter the bootloader, it was just a black screen... then i just install the drivers on pc and start a rsd without entering the bootloader, it worked for me....
tuneon said:
did that but still cant get the phone into bootloader
the phone is connected to the computer (usb) but there is only a white light on the top screen that it :crying:
please help me what can ido from here ?
tnx alot.
Click to expand...
Click to collapse
So just start flashing SBF it must work .... (you may needn´t get phone into bootloader mode because it is in bootloader mode)
yzeroy said:
So just start flashing SBF it must work .... (you may needn´t get phone into bootloader mode because it is in bootloader mode)
Click to expand...
Click to collapse
The RSD Lite cant recognize the phone - i haved tried all the method with the + & the - & battery but still nothing its geting realy despair
please what can i do next ? its like the phone is died but the white light is still on when connected to the usb cable.
The RSD Lite cant recognize the phone - i haved tried all the method with the + & the - & battery but still nothing its geting realy despair
please what can i do next ? its like the phone is died but the white light is still on when connected to the usb cable.
tuneon said:
The RSD Lite cant recognize the phone - i haved tried all the method with the + & the - & battery but still nothing its geting realy despair
please what can i do next ? its like the phone is died but the white light is still on when connected to the usb cable.
Click to expand...
Click to collapse
First of all check your battery. Charge it using external charger or use mcgyer methode.
Sent from my Motorola Electrify using Tapatalk 2
Related
i have install mod clock recovery to my phone
& it is ok but when i try with nofills
the phone restart & keep on the logo i try hardrest but it is fail
now i can enter the normal recovery
no official rom here ? and how can i flash it ?
or any easy solution ?
download a stock rom, enter bootloader mode by pressing up-button and power while turning on the phone, connect it to your pc (make sure you have RSD Lite on your pc) and flash... your flipout will look like new
Geko90 said:
download a stock rom, enter bootloader mode by pressing up-button and power while turning on the phone, connect it to your pc (make sure you have RSD Lite on your pc) and flash... your flipout will look like new
Click to expand...
Click to collapse
thank u it s work thank u
RSD LITE is not detecting phone
Geko90 said:
download a stock rom, enter bootloader mode by pressing up-button and power while turning on the phone, connect it to your pc (make sure you have RSD Lite on your pc) and flash... your flipout will look like new
Click to expand...
Click to collapse
sir,
rsd lite is not detecting my phone.
i've bricked my phone by overclocking,
now when i start my phone it boots up to m logo only.
and i can still open my bootloader by holding X and power button,but this is not detected by RSD lite
kindly help me
regards,
Sunil Kumar S
sunilkumar1 said:
sir,
rsd lite is not detecting my phone.
i've bricked my phone by overclocking,
now when i start my phone it boots up to m logo only.
and i can still open my bootloader by holding X and power button,but this is not detected by RSD lite
kindly help me
regards,
Sunil Kumar S
Click to expand...
Click to collapse
Hey Sunil!
It is Up Arrow key on d-pad and powerup key, it should take you to a black screen with white characters.
Try RSD 5.6 and be patient.
Regards
hsr
The X takes you to recovery and up arrow key to the bootloader
somewhere in africa
Hi everyone,
I read all about this but not worked for me.
My motorola defy not go into recovery mode and bootloader do not, I tried all the tips in this particular topic -> http://forum.xda-developers.com/showthread.php?t=1065798 and others ... and nothing ...
I made a video trying to enter the bootloader and recovery mode ... follows -> http://www.youtube.com/watch?v=Cnof...xt=C320d15aUDOEgsToPDskJcSeRZyS4K6ks2H1YOYGqo
PLEASE HELP ME ...
If you see an m it's too late, try holding Vol up before inserting battery
Sent from my MT11i using Tapatalk
mpiekp said:
If you see an m it's too late, try holding Vol up before inserting battery
Sent from my MT11i using Tapatalk
Click to expand...
Click to collapse
You are not doing it properly. First of all make sure your phone is powered off. Then press the vol up key and keep pressing it. Then press the power key. Do not relese the vol up key till you see the bootloader.
you seem to be pressing vol-.
you have to press vol+ and then power on button or press vol+ and battery insert
popcorn1122 said:
you seem to be pressing vol-.
you have to press vol+ and then power on button or press vol+ and battery insert
Click to expand...
Click to collapse
I try press vol- before put batery, before press power on, before insert charger... I try press vol + too ... and nothing
I tried the mokey method
when i put the charger does not show the battery charging screen appears only the M ...
Was it to heaven of cell phones?
Remove cable and battery hold down volume + insert battery press power on, your now in bootloader ,now you can release Vol up and insert cable.
Sent from my MT11i using Tapatalk
are your vol buttons working properly?
To use the RST, you must use the Vol + button. If done correctly the motorola logo will not appear.
popcorn1122 said:
are your vol buttons working properly?
Click to expand...
Click to collapse
All started when the Defy began to restart on the startup MotoBlur screen, I went into recovery mode (vol-) and restore the original settings, but continued with the same problem. I tried to install via RSD Lite the Froyo rom, the Defy booted and stopped on the screen where need to enter the MOTOBLUR account, but he came back to restart.
After I entered the bootloader (vol+) with the rom JORLA, started normally and the screen to set up the account MOTOBLUR he restarts (again) with the same problem. I removed the battery to enter the bootloader to put Froyo rom again but no longer entered the bootloader, I tried the recovery menu and also failed. I put the charger and nothing, stay on the screen with the M in the center, it blink and does not leave him, I put in the USB but a white light turn on and the computer does not recognize anything.
I don't know what I do.
Sorry for my english ...
Daniel
popcorn1122 said:
you seem to be pressing vol-.
you have to press vol+ and then power on button or press vol+ and battery insert
Click to expand...
Click to collapse
I've a similar problem on a NEW Motorola Defy...
...can't go in Bootloader!!!
I've pressed Power and Vol+ BEFORE insert battery and doesn't work!
Recovery Mode works but I can't use RSD Lite to flash (is possible without recovery???)
My phone is a Defy Mini with red lens, 600 MHz CPU (so it isn't a Plus) and 1700mAH battery (like Plus?).
Is a italian phone branded by TIM (Telecom Italia Mobile), maybe they made some "lock"?
try this:
start and set RSDlite with your favorite sbf
than conect the phone in OFFMODE
if the RSDlite see your phone (something like this"S Flash 3630)
start flash the sbf
if not, try to charge the battery(could be empty) and try again
if even so RSDlite not see the phone NOW you have a problem
good luck
vaserbanix said:
try this:
start and set RSDlite with your favorite sbf
than conect the phone in OFFMODE
if the RSDlite see your phone (something like this"S Flash 3630)
start flash the sbf
if not, try to charge the battery(could be empty) and try again
if even so RSDlite not see the phone NOW you have a problem
good luck
Click to expand...
Click to collapse
Doesn't works BUT works when phone is ON (really really strange) and RSD reboot phone in flashmode, showing this:
MBM Flash-mode.
TinBoost
version: 01.0a
Bootloader USB Init SECURE BOOT ENABLED
Trying to flash DEFYPLUS_U3_4.5.1-134_DFP-231 but after preparig file it say:
Failed flashing process. Phone (0000); Error sending RAM download for bootloader. Device API Error: 0xE0020083 Adress: 0x82000000 Command: ADDR (0xE0222083)
---------- Post added at 01:22 PM ---------- Previous post was at 01:05 PM ----------
Sorry, it say XT320, I think it's a Defy MINI.
No way?
Divino said:
Doesn't works BUT works when phone is ON (really really strange) and RSD reboot phone in flashmode, showing this:
MBM Flash-mode.
TinBoost
version: 01.0a
Bootloader USB Init SECURE BOOT ENABLED
Trying to flash DEFYPLUS_U3_4.5.1-134_DFP-231 but after preparig file it say:
Failed flashing process. Phone (0000); Error sending RAM download for bootloader. Device API Error: 0xE0020083 Adress: 0x82000000 Command: ADDR (0xE0222083)
Click to expand...
Click to collapse
what phone you have?
did you flash before that an sbf for other device?
edit:
whay you try to put on xt320 an sbf for defy+?
you need a sbf for your tipe of phone
search here http://forum.xda-developers.com/showthread.php?t=1787152
vaserbanix said:
you need a sbf for your tipe of phone
search here http://forum.xda-developers.com/showthread.php?t=1787152
Click to expand...
Click to collapse
Yes, I was thinking it was a Defy...
...some of this roms is rooted?
;_(
Divino said:
Yes, I was thinking it was a Defy...
...some of this roms is rooted?
;_(
Click to expand...
Click to collapse
i dont know!
i have defy mb525
you can look here too http://www.motorola.com/Support/US-EN/Country-Selector/XT320-DEFY-MINI
My precious DEFYred cm10JB.Quarx powered by JellyX kernel
system format
Hi!
Sorry it's my first question here on XDA forum.
I have a Defy with CWM, and Stock ROM. Can I use format system partition, and then flash a Custom ROM from a zip file in CWM? Or should I use just wipe data/cache, then flash a Custom ROM? Which is better?
Thanks
danee91 said:
Hi!
Sorry it's my first question here on XDA forum.
I have a Defy with CWM, and Stock ROM. Can I use format system partition, and then flash a Custom ROM from a zip file in CWM? Or should I use just wipe data/cache, then flash a Custom ROM? Which is better?
Thanks
Click to expand...
Click to collapse
First: You posted in wrong thread, this thread is only for that defy's not going in locked on M logo and no recovery & bootloader. 2nd: You don't need to format system rom, because cwm wipe it while flashing ROM zip. Just wipe data/cache/dalvik and you'll fine.
Has anyone saved this problem ? i`m into the same situation...
Try monkey method - hold volup + power and when insert battery. Helped for me once. If this method will not help try this - 1.remove phone battery from defy, 2.plug charger to socket ,but not in the phone, 3. Holding volup button plug charger in phone without battery, 4. It should enter in bootloader but with blinking VATTERY LOW. CANNOT PROGRAM, 5. put battery in phone, 6. Reflash with rsd lite. If above metods not helping - still moto logo - mainboard fried, when only one solution - service center. Good luck. :thumbup:
Sent from my MB526 using xda app-developers app
popcorn1122 said:
are your vol buttons working properly?
Click to expand...
Click to collapse
how can i know ?
tnx.
Hello everybody ,
I have a Defy and .. is dead ! The RSDLite dont show the device .. and .. i try the instructions from http://forum.xda-developers.com/showthread.php?t=1618718 .. but no result ..
i cant restore sbf with RSDLite and .. the phone does not leave the screen
Details.. what do you see on screen?. Where are you stuck at?
Is your battery charged??
Sent from my Defy+ using Tapatalk 2
yeah .. the battery is charged ..
when i turn on .. dont show nothing .. the led is aways off. .. sometimes turn on white .. nothing more ..
in rsdlite .. the phone dont show ..
tiagomoraisc said:
yeah .. the battery is charged ..
when i turn on .. dont show nothing .. the led is aways off. .. sometimes turn on white .. nothing more ..
in rsdlite .. the phone dont show ..
Click to expand...
Click to collapse
are u able to go in Boot loader MOD?
press Volume+ key and Power on the phone..
it will go to BL Mod CONNECT PHONE TO PC VIA USB open RSD Lite
then RSD Lite will Recognize your phone
then flash your SBF
1.Download RSD lite v5.3.1 or later version and install it.
2.Download MotoDev USB drivers from here (http://bit.ly/K59zlZ and install it.
3.Turn off your phone
4. Hold down Volume Down and Power button for your phone to enter Stock Recovery.
5. Press both Volume buttons at the same time for the options to appear.
6. Do wipe cache.
7. Do wipe data/factory reset.
8.Take your battery out.
9.Hold Volume Up and Power button and put the battery back in while holding the buttons - your phone will start in Bootloader mode.
10.Connect the phone which is now in the Bootloader mode to the PC.
12. Open RSDLITE which you have installed and select the Downloaded sbf
13.Click "Start"
14. You can see "SW Update in progress" on your phone's screen - the flashing is in process.
15. The flashing process takes around 5 minutes, after which RSD lite will reboot your phone.
16. Wait until RSD lite says "PASS!" and then you're free to disconnect your phone (*if RSD lite doesn't say "PASS!" after 2-3 minutes and your phone has booted up, you're still free to disconnect).
17. Root your phone using Doomlord's script or SuperOneClick.
18. Install SndInit for defy+ from here.http://dl.xda-developers.com/attachd...itDefy_2.3.apk
If you need any more info on how to root or flashing the rom, Please ask and stay away from trouble.
Tanks Anands3 ...
but .. my phone dont show in RSDLite .. and .. dont enter in Stock Recovery screen ...
when i press Volume+ and Power ..
nothing happens ...
tiagomoraisc said:
Tanks Anands3 ...
but .. my phone dont show in RSDLite .. and .. dont enter in bootloader screen ...
when i press Volume+ and Power ..
nothing happens ...
Click to expand...
Click to collapse
It might won't show up but try this..
Press volume+ & Power button. Even if the screen remains blank, connect it to RsdLite. If it shows up in RsdLite, flash the SBF.
If it doesn't, then unfortunately, its bricked.
Sent from my Defy+ using Tapatalk 2
Ok ... this screen need show ..
so, i will get other batery with a friend ..
and will try again ...
later i talk about ..
tanks guys !
Hummm ... bad news .. !!!
When i hold Volume (-) & Power .. the phone dont enter in Stock Recovery screen!
The only thing that happens is: LED lights in WHITE, when I connect to the computer. just it!
what i can do now?!
Did you change the battery with a one that is charged FOR SURE?
same problem last several days and i fixed it:
+remove battery and put it back (make sure battery full charged)
+press power button and volume+ for 5 secs,even the screen still black
+connect to computer,u can see white led and RSD lite will display usb connected
+flash *.sbf
if it doesn't work u can try with another computer or cable
good luck!
Auris 1.6 vvt-i said:
Did you change the battery with a one that is charged FOR SURE?
Click to expand...
Click to collapse
Yeah ..
i try with other batery ..
And still no luck?
haiwru said:
same problem last several days and i fixed it:
+remove battery and put it back (make sure battery full charged)
+press power button and volume+ for 5 secs,even the screen still black
+connect to computer,u can see white led and RSD lite will display usb connected
+flash *.sbf
if it doesn't work u can try with another computer or cable
good luck!
Click to expand...
Click to collapse
Hey man .. tanks . but ...
When i press Volume+ & Power nothing happen ..
when i conect the phone to computer nothing happen in RSDLite ..
so .. i cant flash a .sbf file ..
and .. i try with other cable .. and .. no response ..
i have a big problem!
When you connect, does it turns White LED on??
Sent from my Defy+ using Tapatalk 2
when i connect the LED is White .. just it
i have the same problem...
my battery is fully charged...
when i press the power button, it wont turn on... even the led doesnt blink..
when i press the power button + volume up or volume down, nothing happens...
when i try to connect it with RDSLite v5.3.1, it recognizes my defy+...
i tried to flash diffferent stock roms but nothing comes up even the flashing proccess suceeded (PASS)...
my defy+ is still at nothing status...
the last rom i flashed is JORDN_U3_97.21.51.sbf...
HOPE SOMEONE CAN HELP US...
THANKS IN ADVANCE!!
talakoto said:
i have the same problem...
my battery is fully charged...
when i press the power button, it wont turn on... even the led doesnt blink..
when i press the power button + volume up or volume down, nothing happens...
when i try to connect it with RDSLite v5.3.1, it recognizes my defy+...
i tried to flash diffferent stock roms but nothing comes up even the flashing proccess suceeded (PASS)...
my defy+ is still at nothing status...
the last rom i flashed is JORDN_U3_97.21.51.sbf...
HOPE SOMEONE CAN HELP US...
THANKS IN ADVANCE!!
Click to expand...
Click to collapse
Seems your problem is flashing sbf with too low CG version - sbf u mentioned is CG5 Chinese eclair. Depending of what u had before u can install CG6 or CG7 sbf from this site
talakoto said:
i have the same problem...
my battery is fully charged...
when i press the power button, it wont turn on... even the led doesnt blink..
when i press the power button + volume up or volume down, nothing happens...
when i try to connect it with RDSLite v5.3.1, it recognizes my defy+...
i tried to flash diffferent stock roms but nothing comes up even the flashing proccess suceeded (PASS)...
my defy+ is still at nothing status...
the last rom i flashed is JORDN_U3_97.21.51.sbf...
HOPE SOMEONE CAN HELP US...
THANKS IN ADVANCE!!
Click to expand...
Click to collapse
Try flashing the last rom that worked for you.
Sent from my Defy+ using Tapatalk 2
corrinti said:
Seems your problem is flashing sbf with too low CG version - sbf u mentioned is CG5 Chinese eclair. Depending of what u had before u can install CG6 or CG7 sbf from this site
Click to expand...
Click to collapse
im currently trying all of the roms listed on the link you gave...
some gave me error Err:A5,69,35,00,27 on bootloader... (seems much better status than before)
some gave me nothing... (just like before - blank screen, no led)
17 more roms to go...
talakoto said:
im currently trying all of the roms listed on the link you gave...
some gave me error Err:A5,69,35,00,27 on bootloader... (seems much better status than before)
some gave me nothing... (just like before - blank screen, no led)
17 more roms to go...
Click to expand...
Click to collapse
i flashed the ROOTED EU CEE rom from this thread http://forum.xda-developers.com/showthread.php?t=1542956
THIS ROM CAN'T DOWNGRADE,TRY IT IF U HAVE NOWAY TO LET YOUR PHONE ALIVE
hey,
i tried today to change my rom for defy from 2.2.2 to 2.1 (doesnt matter why..)
after let it go to 100% and then he sad please power off the phone manualy
i power off and it doest reply, i close the rsd and then just the moto logo apper .. i tried hard reset but it doesnt help to the sitiuation.. the room was 36mb but the nand have a 100+ mb and i didnt touch the nand or put it in the sd card - is that matter?
ty for helping, niv~!
you bricked your phone by trying to downgrade the bootloader version. flash back the 2.2.2 sbf and it should work again.
sent from my cm7 defy...
i dont think my phone apper in RSD LITE - SHOW DEVICE..
nivv said:
i dont think my phone apper in RSD LITE - SHOW DEVICE..
Click to expand...
Click to collapse
boot up to the bootloader (when turned off: vol up+power button long press), and after that connect to pc. maybe this way it will recognize your phone. does the white led light up when connected to pc?
sent from my cm7 defy...
zakoo2 said:
boot up to the bootloader (when turned off: vol up+power button long press), and after that connect to pc. maybe this way it will recognize your phone. does the white led light up when connected to pc?
sent from my cm7 defy...
Click to expand...
Click to collapse
i do that and it get me to the white triangle with exclmation point in it if that is the bootloader..
the white led is ON when it connected to PC
nivv said:
i do that and it get me to the white triangle with exclmation point in it if that is the bootloader..
the white led is ON when it connected to PC
Click to expand...
Click to collapse
volume UP not down the triangle with the exclamation mark is the stock recovery, you can access that by pressing vol up+down at the same time at the triangle. the bootloader is a terminal-like black screen. but be careful: without any working rom you cant charge your phone, and if the battery is low, you cannot flash anymore. good luck!
Question go in the Q&A section
Hi my power button recently broke and i tried to flash twrp recovery to my working defy with wiui installed which allows to to wake the phone with the volume rocker, it has corrupted my recovery and my defy wont boot into android is my phone bricked as i cant think of anyway to recover it from this. Thanks
morgs640 said:
Hi my power button recently broke and i tried to flash twrp recovery to my working defy with wiui installed which allows to to wake the phone with the volume rocker, it has corrupted my recovery and my defy wont boot into android is my phone bricked as i cant think of anyway to recover it from this. Thanks
Click to expand...
Click to collapse
read this guide: http://forum.xda-developers.com/showthread.php?t=1216982
Boot into Bootloader mode (power-on while holding Vol-Down)
You may need to flash an SBF to get going again.
_ossie_ said:
read this guide: http://forum.xda-developers.com/showthread.php?t=1216982
Boot into Bootloader mode (power-on while holding Vol-Down)
You may need to flash an SBF to get going again.
Click to expand...
Click to collapse
Hi thanks for your reply i cant get into bootloader mode as my power button is broken?
morgs640 said:
Hi thanks for your reply i cant get into bootloader mode as my power button is broken?
Click to expand...
Click to collapse
Pull the battery and reinsert it while holding Vol-Down. This usually works as a power-up.
Do it while connected to a PC. The PC should sound the "device connected" sound.
If the white LED comes on, it usually means the phone is OFF and charging. No LED usually means it's ON and in BL mode (you should get the white text on black screen, but you won't if you have flashed a 'bad' SBF).
Try this a few times.
If nothing else is broken you should be able to get into BL mode and flash an SBF.
But your power button needs to be mechanically fixed at some stage, or your phone isn't going to be much use.
_ossie_ said:
Pull the battery and reinsert it while holding Vol-Down. This usually works as a power-up.
Do it while connected to a PC. The PC should sound the "device connected" sound.
If the white LED comes on, it usually means the phone is OFF and charging. No LED usually means it's ON and in BL mode (you should get the white text on black screen, but you won't if you have flashed a 'bad' SBF).
Try this a few times.
If nothing else is broken you should be able to get into BL mode and flash an SBF.
But your power button needs to be mechanically fixed at some stage, or your phone isn't going to be much use.
Click to expand...
Click to collapse
I have tried all of this already and unfortunately it doesnt get into bootloader mode it just comes up with the moto logo. The phone was working before i tried to update my cwm to twrp i didnt flash an sbf. The power button works fine it must be stuffed on the mainboard i took it apart and the button works fine, why do i need the power button for anyway?
morgs640 said:
I have tried all of this already and unfortunately it doesnt get into bootloader mode it just comes up with the moto logo. The phone was working before i tried to update my cwm to twrp i didnt flash an sbf. The power button works fine it must be stuffed on the mainboard i took it apart and the button works fine, why do i need the power button for anyway?
Click to expand...
Click to collapse
now can you turn on your phone? the power btn works?
try flashing official sbf , root and 2nd-init again.
p.s make sure you have above 20% batt or you gonna spend your time just like me plugging the defy mobo directly to 5 volts.
-Danik- said:
now can you turn on your phone? the power btn works?
try flashing official sbf , root and 2nd-init again.
p.s make sure you have above 20% batt or you gonna spend your time just like me plugging the defy mobo directly to 5 volts.
Click to expand...
Click to collapse
The power button doesnt work but it turns on when battery is inserted, i cant get the phone to pickup in rsd
morgs640 said:
The power button doesnt work but it turns on when battery is inserted, i cant get the phone to pickup in rsd
Click to expand...
Click to collapse
Hold the Volume Up key while inserting the battery.
_ossie_ said:
Hold the Volume Up key while inserting the battery.
Click to expand...
Click to collapse
just goes to moto logo, with usb cable it does the same after about a minute. i can get into the android bootmenu (where u can go into cwm overclock from etc) but recovery doesnt load comes up with missing file error due to me trying to flash twrp
morgs640 said:
just goes to moto logo, with usb cable it does the same after about a minute. i can get into the android bootmenu (where u can go into cwm overclock from etc) but recovery doesnt load comes up with missing file error due to me trying to flash twrp
Click to expand...
Click to collapse
Doesn't bootmenu (Recovery) give you option to reboot into Bootloader? If so, do this and flash an SBF.
_ossie_ said:
Doesn't bootmenu (Recovery) give you option to reboot into Bootloader? If so, do this and flash an SBF.
Click to expand...
Click to collapse
Even if it does, power button is malfunctioning, hence can't select it...
Sent from my MB525 using Tapatalk 2
dbarrera said:
Even if it does, power button is malfunctioning, hence can't select it...
Sent from my MB525 using Tapatalk 2
Click to expand...
Click to collapse
the menu button works to select items in cwm so no problem there, do u mean in bootloader?
_ossie_ said:
Doesn't bootmenu (Recovery) give you option to reboot into Bootloader? If so, do this and flash an SBF.
Click to expand...
Click to collapse
options are
- boot
-cpu
-recovery
-tools
-reboot
dbarrera said:
Even if it does, power button is malfunctioning, hence can't select it...
Click to expand...
Click to collapse
<<< head hits desk >>>
OK so if the phone will boot into recovery it SHOULD also boot into bootloader ?
Maybe I confused OP by saying hold "Vol Down" when I meant "Vol UP" ???
Anyway, OP will probably not get too far without a functional Power button.
_ossie_ said:
<<< head hits desk >>>
OK so if the phone will boot into recovery it SHOULD also boot into bootloader ?
Maybe I confused OP by saying hold "Vol Down" when I meant "Vol UP" ???
Anyway, OP will probably not get too far without a functional Power button.
Click to expand...
Click to collapse
Ok im with you now haha i thought you meant i needed the power button in cwm and i was thinking what for? but i cant get into bootloader anyway so doesnt really matter. I cant get into anything except cwm, holding up just brings up a black light up screen and phone wont recognize in rsd
morgs640 said:
... holding up just brings up a black light up screen and phone wont recognize in rsd
Click to expand...
Click to collapse
Are you SURE? I have had Bootloader work even though nothing shows on screen (when I flashed the wrong SBF). The screen was black but RSD could still "see" the device.
Defy has a locked bootloader (cannot be overwritten), so the fact that you can boot into recovery indicates the bootloader is still there and working. Maybe the problem is in your version of RSD Lite, or your version of drivers installed on the PC, or in your USB cable?
Try uninstalling the drivers from the PC, then rebooting, then attaching the phone and insert battery while holding Vol-Up. This SHOULD reinstall the BL drivers to the PC. Try another USB cable - I have had cables which work for charging but not for data transfer.
_ossie_ said:
Are you SURE? I have had Bootloader work even though nothing shows on screen (when I flashed the wrong SBF). The screen was black but RSD could still "see" the device.
Defy has a locked bootloader (cannot be overwritten), so the fact that you can boot into recovery indicates the bootloader is still there and working. Maybe the problem is in your version of RSD Lite, or your version of drivers installed on the PC, or in your USB cable?
Try uninstalling the drivers from the PC, then rebooting, then attaching the phone and insert battery while holding Vol-Up. This SHOULD reinstall the BL drivers to the PC. Try another USB cable - I have had cables which work for charging but not for data transfer.
Click to expand...
Click to collapse
Alright sound good thanks ill give it a go on my other pc using a different cable, thanks for your continued help with the problem
No go looks like the phone is cooked tried another defy and picks up straight away in rsd on boith pc's and mine doesnt work on either thanks for your help people.
ols help me....defy stuck at black screen...no bootloader
rsd lite recognises through factory cable but while flashing sbf it gives error sending ti rom packets and den it fails.....my stock rom was froyo india.....pls help.....
:crying: