[ROM] [SGH-I757M only] Paranoid Android - Galaxy S II General

Paranoid Android (Jelly Bean) for Samsung Galaxy S2 HD LTE (SGH-I757M)
This is a fairly new ROM built from the Paranoid Android 2+ source code.
I do not develop this ROM nor do I provide support for it.
I felt that we needed a new topic to talk about this PAndroid ROM as the CM10 topic was getting pretty hefty and unorganized.
Since the development for this ROM is new, don't expect it to be as stable as CM9. Check "What Doesn't Work" for a list of what's broken!
If you still don't know what ClockWorkMod Recovery or Paranoid Android is, Google it or search XDA.
WARNING! Do not flash this to a different device model from the one it's meant for. It will not work with the other Galaxy S2 iterations, so don't try it with the Bell Galaxy S2 I9100M (non-HD). DO NOT flash it on the Asian variant of the GS2 HD (SHV-E120) either, as it uses slightly different internal hardware - the ROM will be unstable and the phone component will not work. If you are sure you have the CANADIAN Bell Galaxy S2 HD LTE (SGH-I757M), you may continue.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashing The Recovery Menu
Do you have the stock recovery menu installed? If so, move to step two. If you already have CWM installed, move to "Flashing Paranoid Android"
Download Odin from here: bit.ly/WXpnCN AND download CWM Recovery here: bit.ly/WXpfDA
Start your SGH-i757m in 'Download Mode' (Shut off device. Hold the Volume Down key while powering the phone on. The device will vibrate and soon you will see a Warning screen, where you will need to press Volume Up to enter Download mode.)
While in Download Mode, start up Odin and connect your phone to the PC via USB. You should see a status message in Odin saying your device was "added".
In Odin, press the 'BOOTLOADER' button and select the CWM TAR file you downloaded from step two.
In Odin, press Start. Once Odin is done it should say "PASS". If it doesn't finish or is stuck, try re-downloading the recovery file.
Your device will reboot.
Flashing Paranoid Android
Download the latest version of PAndroid from Socim's Dev-Host: bit.ly/WK042w AND G-Apps from: bit.ly/117KEsZ
Place both *.zip files on your Micro-SD card. Do NOT Extract Them!
Start your phone into CWM Recovery mode. To accomplish this hold down the Power Button to turn the phone on, and then immediately hold down Volume Up + Volume Down at the same time. Let go of the buttons at the exact moment you see the "Samsung" Logo.
Select "Wipe Data/Factory Reset"
Then choose "Install Zip" then "Chose Zip From External SDCard" and select the PAndroid version you downloaded in step one. Do this TWICE just to be sure.
Next flash the G-Apps file you downloaded from step one the same way.
OPTIONAL: If you need to install the Stock Bell ICS Modem, now would be the time to do it. You can get it from dsixda's Dev-Host: http://bit.ly/Wu4SJe
Reboot your device.
What Doesn't Work
Some GUI elements (ie. Youtube Controls) become hidden behind content
Some camera apps display as unintended (ie. Instagram)
No touch-to-focus for camera. Regular focus does work though
"Random" crashes
Sources and Acknowledgements
Huge thanks to Socim for getting the ball rolling on this device again! bit.ly/Vc3j7d
Also, I based most of my instructions off of dsixda's posts. bit.ly/UavsHn
And to the community for not letting this amazing phone go to waste!
Click to expand...
Click to collapse

thank you so much for the ROM. A quick question though, the white flash at my hardware keys (navigation bar) remain always on. I think the light should only be activated on use.

legendofjon said:
thank you so much for the ROM. A quick question though, the white flash at my hardware keys (navigation bar) remain always on. I think the light should only be activated on use.
Click to expand...
Click to collapse
They should only stay on when charging.
Sent from my SGH-I757M using xda app-developers app

legendofjon said:
thank you so much for the ROM. A quick question though, the white flash at my hardware keys (navigation bar) remain always on. I think the light should only be activated on use.
Click to expand...
Click to collapse
I suppose it because I set touchkey autobrightness to true in framework config, so you guys who doesn't turned on autobrightness will encounter this.

Home and Search buttons don't work
ROM looks good so far, just flashed this morning. Only issue I have noticed is the home and search buttons don't work.
[UPDATE]
I reinstalled and looks like something that loaded when I restored with Titanium backup caused the home button issues. Everything looks good now.

ljdizzo said:
ROM looks good so far, just flashed this morning. Only issue I have noticed is the home and search buttons don't work.
Click to expand...
Click to collapse
Everything working great for me including the home and search buttons...this looks to be a very stable ROM...
Sent from my SGH-I757M using xda premium

im getting a status 7 error in cwm any reasons why?

Thank you for this.
Sent from my SGH-I757M using Tapatalk 2

skodazek said:
Thank you for this.
Sent from my SGH-I757M using Tapatalk 2
Click to expand...
Click to collapse
No problem! Really gave me time to truly get used to the post editor! :laugh:

Is this rom still being worked on? I have a t989d and the jb roms for it are amazingly stable and still being improved. Would love to see a jb rom for this phone become a stable daily driver.
Gonna flash this either way and check it out!

Working Good here. Great work!!!
The phablet mode 600px with a defualt DPI of 290 works great and looks great for most apps! Some may need individual adjustment. The only app that will need adjustment after reboot is the launcher. This is what you do.
You head into paranoid settings,
hit the Apps button on the left.
Then choose Trebuchet and adjust the DPI to exactly 228. Hit Apply.
This makes everything look right again. In both the drawer and on the home screen. Otherwise your apps in drawer will not fill the screen properly, and icons start looking to small. On the home screen, for some reason if you have 5 coloumns or less, you lose your last two icons on your launcher. You will also need to do the following.
head into the launcher settings,
click home screen.
Adjust the rows to your choice.
But the coloumns need to be 6 or more.
While you are in there you will also want to
enable Resize any widget
and disable wallpaper scrolling.
I also changed alot of my dpi for other individual apps, making things look even better. This rom has made my phone work and look more awesome than it was ever destined to be! Thanks to everyones continued efforts on this phone.
Only issues I have are backlight keys sometimes do not want to come back on when you unlock phone. They do come back on later tho, never really timed it. Also andom reboots. Maybe like one or two a day.
Also I should mention DO NOT install the latest gapps
gapps-jb-20121128-signed.zip
I installed it and it broke my keyboard. If you just gotta try it..... then make sure you have a nand backup done first.

To get the backlights to come on just adjust your screen brightness...lights come on, for me anyway. I have the slider in notification bar so it's not a big deal.
Sent from my SGH-I757M using xda premium

I tried it for a few minutes and half way through restoring the apps and settings, the phone got extremely hot. So now I'm back to CM10, but if anyone knows what's wrong, I'd love to try it out again.

Siavash8 said:
I tried it for a few minutes and half way through restoring the apps and settings, the phone got extremely hot. So now I'm back to CM10, but if anyone knows what's wrong, I'd love to try it out again.
Click to expand...
Click to collapse
I suggest not restoring your apps and settings using Google's wizard. Sometimes it breaks a lot. Instead, just restore your apps manually using the Play Store OR a previous Titanium Backup.
Sent from my SGH-I757M

CharlieMPK said:
I suggest not restoring your apps and settings using Google's wizard. Sometimes it breaks a lot. Instead, just restore your apps manually using the Play Store OR a previous Titanium Backup.
Sent from my SGH-I757M
Click to expand...
Click to collapse
Agree. For example some touchkeys won't work if you come from cm10.
---------- Post added at 05:26 AM ---------- Previous post was at 05:20 AM ----------
rukusx7 said:
Also I should mention DO NOT install the latest gapps
gapps-jb-20121128-signed.zip
I installed it and it broke my keyboard. If you just gotta try it..... then make sure you have a nand backup done first.
Click to expand...
Click to collapse
When we got Android 4.2 we will need it.

Hey guys just an update on my phones experience. The rom is pretty stable for me as well. However I have had a few sudden reboots and system ui crashes. As well the latest gapps do not work correctly for me for some reason so I flashed the gapps from cm9 and that works.
The sudden reboots happen mainly when watching a video or changing wallpapers and the system ui crashes out of no where.
Now I have wiped cashed partition and delvik cach which solves the above mentioned two issues it for awhile but continues again. As well re flashing the PA rom from Nov 22.
Sent from my SGH-I757M using xda premium

CharlieMPK said:
I suggest not restoring your apps and settings using Google's wizard. Sometimes it breaks a lot. Instead, just restore your apps manually using the Play Store OR a previous Titanium Backup.
Sent from my SGH-I757M
Click to expand...
Click to collapse
Actually that's what I always do. At first, I let the Play Store downloads all the apps again, and then I restore the user apps data using Titanium Backup. This way, I don't have to tap "Install" for every fricking app. But it got so hot in the middle of downloading the apps, that I kinda freaked out and got back to CM10. It may be related to the settings and configuration connected to my Google account. I'll try again without entering my user name and password at the start and see how it goes.

I ran the ROM for the better part of 16 hrs (workday testbed) other than the play store crashing here and there, I had no issues, I was very impressed. I noticed the benchmark scores were low but if anything we know they're nothing more than a number in most cases. I did have the same heating up issue with heavy file transfers but honestly couldn't give you a value of PA vs dsixda's ICS rom. Performance "felt" much smoother and more fluid. Gallery, lights and what not worked like a charm.
PA question - Where do I turn on display battery %? I'm going to run it another day with all my automated & battery apps running, see how battery life is.
Thanks for the dev on the ROM guys, really gave new life to the device. I was seriously debating axing it for another, at my own expense since its a work phone.

Everything except for the Paranoid settings, adjusts the same way as CM10. You can find the option for battery % under System Settings/system/Status Bar.
I forgot to mention one thing that had caused me issues. When I installed PANov23 I had high useage on the app named "media". I killed it have not had a problem since. I also prefer the noop or deadline scheduler and have heard that the CFQ scheduler can sometimes take some time to scan your sdcard causing high CPU useage upon bootup. I also recommend spending the money on the PRO version of Titanium Backup. If you are a frequent Flasher, and not a dirty flasher, then you SHOULD have a paid copy of this app!!
I also use GSam Battery Monitor to watch what eats my battery. Its like Better Battery Stats, but more robust. Check it out.

rukusx7 said:
Everything except for the Paranoid settings, adjusts the same way as CM10. You can find the option for battery % under System Settings/system/Status Bar.
I forgot to mention one thing that had caused me issues. When I installed PANov23 I had high useage on the app named "media". I killed it have not had a problem since. I also prefer the noop or deadline scheduler and have heard that the CFQ scheduler can sometimes take some time to scan your sdcard causing high CPU useage upon bootup. I also recommend spending the money on the PRO version of Titanium Backup. If you are a frequent Flasher, and not a dirty flasher, then you SHOULD have a paid copy of this app!!
I also use GSam Battery Monitor to watch what eats my battery. Its like Better Battery Stats, but more robust. Check it out.
Click to expand...
Click to collapse
Should have mentioned I've never been a CM10 user. I started off with Android only very recently with an S3 first and the dev wasn't there for a daily driver, then I swapped that in for a Note 2, so again, little dev atm. And then i757, so again, even less dev.

Related

[What's New in]Jellybean 4.1.1 10TH Leak LI4

CSC UNKNOWN?
COPY not MOVE the files from system/csc/BTU/system/csc TO system/csc then reboot.
10TH LEAK XXDLI4
http://forum.xda-developers.com/showpost.php?p=31892837&postcount=217
9TH LEAK XXDLI3
http://forum.xda-developers.com/showpost.php?p=31651394&postcount=215
8TH LEAK XXDLI2
http://forum.xda-developers.com/showpost.php?p=31582718&postcount=214
7TH LEAK XXDLI1
http://forum.xda-developers.com/showpost.php?p=31131029&postcount=205
6TH LEAK XXDLH9
http://forum.xda-developers.com/showpost.php?p=31026070&postcount=182
5th Leak XXDLH8
http://forum.xda-developers.com/showpost.php?p=30815693&postcount=164
4th Leak XXDLH7
http://forum.xda-developers.com/showpost.php?p=30653822&postcount=144
3rd Leak XXDLH6
http://forum.xda-developers.com/showpost.php?p=30507651&postcount=120
Changes:
- audio recording in video has definitely improved.
- recording video, we can now pause recording and then resume.
- homescreen > phone > menu > in-call equalizer now renamed to my call
- developer options > animator duration scale.
- settings > wifi > advanced > wifi timer
- delete many files in default file browser now shows windows with progress bar and remaining files to be deleted instead of just circle icon rotating in previous rom.
- haven't used browser that much so hope someone could confirm, menu > downloads and menu > settings > bandwidth management
- connects to wifi faster now.
- turning on bluetooth, shows you a window for available bluetooth devices. bluetooth confirmed working both send/receive.
- settings > battery > click on graph to show history details > now includes gps alongside mobile network signal, wifi, awake,screen on and charging.
- compose message using voice, no need for internet.
http://forum.xda-developers.com/showpost.php?p=30463072&postcount=92
noticed when using voltage control:
- back then i only see 200mhz,400,800 and 1.4ghz always utilized. now i can see 400mhz,700 and 1.1ghz,1.2,1.3 being utilized as well. i haven't seen this happen in previous roms from long hours of use and gaming. oh btw, governor used is still pegasusq,i/o is cfq, min 200mhz max 1.4ghz
- pop-up player now resizable. clicking on it will now just pause the video and not return to full screen like it did.
- thanks trc
- CELL STANDY REPORTING BUG FINALLY FIXED. thanks bala high roller baby baby bay
minor bug:
- settings > date and time > when you uncheck 24 hour format the settings(gear) icon on notification bar moves to the right because A.M. or P.M. large font moves the icon to the right. They need to fix this, it's kinda annoying. for me only half of the gear is seen but still clickable. for many, they can't even see the gear because it's pushed to the right.
no such problem on landscape mode.
- GPS confirmed working.
Looking for Voice command for apps? like shoot for camera? answer or reject for calls?
it's not in settings > language anymore. it's in s-voice's settings now.
it is more accurate now, like in music player when you say "previous" sometimes it understands as "pause" kinda like hearing only the "vious" that sounds like "pause". it wasn't accurate with "volume down" back then, only "volume up". now it can distinguish clearly.
BTW, you don't to enable s-voice to be able to use those voice commands. you just need to enable them in s-voice's settings.
wondering what Disable HW overlays is in settings > developer options? description is Always use GPU for screen compositing.
this could help you understand.
http://forum.xda-developers.com/showpost.php?p=30346290&postcount=38
the ones i posted here are from 1st leak, they will probably be still on 2nd leak.
http://forum.xda-developers.com/showpost.php?p=30306603&postcount=369
- Pinch-to-zoom change the size of pop-up player;
- New touchwiz version with some JB news.
Sorry for my bad english.
New in JB (not sure if they were in LG4)
Peak hours on/off sync added in default email app
dormant mode
Voice recording under LED indicator
Home Screen mode change in settings --> Adds JB feature of automtically changing widget location/size
5 shortcut icons instead of 4 on lockscreen
Edit: google now, recent apps and task manager can be accessed by long pressing home button.
TW refresh is still there however its almost instant reload now
Voice cmd setting is now inside s-voice
OP.. seriously. If you want to make a thread and have [TAGS] like there's actually info here... than you have to provide some info. Right now your more asking a question and waiting to see what people say. You need to have something of relevant info if anyone is gonna take this thread seriously. I came in here thinking I could see a cool rundown of what Jelly Bean is bringing to the table, but nah. just another, mislabled topic thread title, with no useful information. This one's easy.. just freaking google your thread title and give us a nice little sneak peak at the features packed in buttery jelly beans! ... for god sake! :crying:
*EDIT* maybe the OP can edit his post after users have chimed in?
radeonxt said:
edit page on homescreen via pinch action is gone. only way now is , on homescreen press menu button > edit page
Click to expand...
Click to collapse
I still have it
Thanks for editing the Op! Now it makes sense
Sent from my GT-I9300 using xda premium
In touchwiz, folders are diferent and almost stock JB like, also on home
Men press menu there are more options now, like add apps and widgets. Also folders are possible in the dock!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9300 using xda premium
How can i get the 2nd leak? I can only download the 1st one. Tnx
Sent from my GT-I9300 using xda app-developers app
Davanzze said:
How can i get the 2nd leak? I can only download the 1st one. Tnx
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1835931&page=42
When taking pictures you get a white border around it indicating that a photo was taken
In apps manager the text on the tabs is smaller and you can swipe sideways to change between downloaded and all. I didn't notice this in ICS
The window to choose which program to use to open a file/default is new (see screenshots)
A whole bunch of new widgets; favourite apps, favourite settings,, favourite contacts, dialler, simple alarm, smart switch, turn off all sounds.
mnt is now called storage
Overscroll glow is now bigger
In app info window there is a check box for notifications
Wi Fi direct is not a separate item in settings but is under menu in the wi-fi window
Phone_Guru said:
When taking pictures you get a white border around it indicating that a photo was taken
Click to expand...
Click to collapse
That was in ICS too.
In apps manager the text on the tabs is smaller and you can swipe sideways to change between downloaded and all. I didn't notice this in ICS
Click to expand...
Click to collapse
Yep, that's new, its the same on the gnex.
The window to choose which program to use to open a file/default is new (see screenshots)
Click to expand...
Click to collapse
That's on the gnex too except Sammy has it themed for TW. (Aosp one looks better)
A whole bunch of new widgets; favourite apps, favourite settings,, favourite contacts, dialler, simple alarm, smart switch, turn off all sounds.
Click to expand...
Click to collapse
yup, lots of new widgets, app remodelling.
mnt is now called storage
Click to expand...
Click to collapse
This was the same on ICS, not new, there is both mnt and storage, sdcard and extsdcard are under both.
Overscroll glow is now bigger
Click to expand...
Click to collapse
Don't think so, maybe I'm wrong but it looks the same to me.
In app info window there is a check box for notifications
Click to expand...
Click to collapse
Really good new feature in JB.
Sent from my GT-I9300 using xda premium
Are the S3 native features present like smart alerts/stay etc?
sak500 said:
Are the S3 native features present like smart alerts/stay etc?
Click to expand...
Click to collapse
yes sir
The ability to change the backgroung of the message app with custom ones.
Sent from my GT-I9300 using xda premium
Dont forget to press thanks button!
Maesedroid said:
The ability to change the backgroung of the message app with custom ones.
Sent from my GT-I9300 using xda premium
Dont forget to press thanks button!
Click to expand...
Click to collapse
It was in ICS too. they have changed it from last to first
watsa said:
It was in ICS too. they have changed it from last to first
Click to expand...
Click to collapse
Oh, thanks for the info. I like it.
Noticed better battery life even better than ICS
Edit: my normal average battery life on stock ics was about 5hours on screen time. On Jb its more like 6 and a half
Sent from my GT-I9300 using xda app-developers app
prking07 said:
In touchwiz, folders are diferent and almost stock JB like, also on home
Men press menu there are more options now, like add apps and widgets. Also folders are possible in the dock!
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Which clock/weather widget do you have?
Sent from my GT-I9300 using Tapatalk 2
Issues observed:
1.Contacts: I can see a contact with moobile number 999999999999 .. not able to delete
2. i can see a S Memo icon that the regular S Memo..when i click on that it says application not installed. when i click on S memo regular one i get a message sayin S Memo has reached end of lifecycle.
3.Music: all songs present in sd card appearing twice.
4.temp on device has reached 44 degree (Monitored using OS monitor application)
fatekills said:
Issues observed:
1.Contacts: I can see a contact with moobile number 999999999999 .. not able to delete
2. i can see a S Memo icon that the regular S Memo..when i click on that it says application not installed. when i click on S memo regular one i get a message sayin S Memo has reached end of lifecycle.
3.Music: all songs present in sd card appearing twice.
4.temp on device has reached 44 degree (Monitored using OS monitor application)
Click to expand...
Click to collapse
your issue #3, i can relate because i had that issue right after i installed jb.
i was so excited after it succesfully installed that i went to exploring it right away.
wiping data on cwm solved that issue and i guess will do the same for the rest of those issues.

XXBLL7 Android 4.1.2 Official Firmware Change Log

Now that XXBLL7 Android 4.1.2 Official Firmware is available for our cameras it would be interesting to see what changes it brings. As usual it's a hunt and track down for changes to upgrades but maybe we can compile a list?
So far I noticed there is now 4 new scenes in SMART mode...
"FOOD" - Take pictures that emphasise the vivid colours of food
"DAWN" - Take pictures that emphasise the dawn sky by making the blue more intense
"SNOW" - Take pictures that emphasise the brightness of snow by making the white more intense
"PARTY/INDOOR" -Take pictures of parties or other indoor activities without blurring
Also:
You can set an option to not automatically fire up the camera when you power on - very pleased by this one!
An icon has appeared on the notification bar - a battery with a recycle sign - to tell you that you have enabled 'Smart Network' mode (turns off network functions when screen is off)
Updated versions of Samsung built in apps naturally
Still looking...
Sadly the storage card dialog still pops up on a cold boot
Remote Viewfinder still not working
apprentice said:
Now that XXBLL7 Android 4.1.2 Official Firmware is available for our cameras it would be interesting to see what changes it brings. As usual it's a hunt and track down for changes to upgrades but maybe we can compile a list?
So far I noticed there is now 2 new scenes in SMART mode... "FOOD" - Take pictures that emphasise the vivid colours of food
and "DAWN" - Take pictures that emphasise the dawn sky by making the blue more intense
An icon has appeared on the notification bar - a battery with a recycle sign
Updated versions of Samsung built in apps
Still looking...
Sadly the storage card dialog still pops up on a cold boot
Remote Viewfinder still not working
Click to expand...
Click to collapse
I want to flash this firmware, but can it be rooted?
Since I've rooted my Camera with Exynos Abuse, it says it is non-standard and refuses to tell me about any updates. Do I need to back out everything before it will notice the update? Does the abuse hole still exist after the update?
Claghorn said:
Since I've rooted my Camera with Exynos Abuse, it says it is non-standard and refuses to tell me about any updates. Do I need to back out everything before it will notice the update? Does the abuse hole still exist after the update?
Click to expand...
Click to collapse
Check in settings-about device-Status If "Device Status" says "Custom" then you will not receive OTA updates. Mine says "Custom" as I rooted with odin. I don't know if Exynos Abuse changes the device status.
Is French language included in this firmware ?
Thx
robb13 said:
I want to flash this firmware, but can it be rooted?
Click to expand...
Click to collapse
I've just tried to, straight after flashing "without wipe" and the Exynoss Exploit APK from Chainfire fails to Root, but I'm going to do a wipe and see if it's a problem with some residual files or something.
Update:
With ExynosAbuse 1.40, although it detects the device as Exploitable, it's unable to Root the device.
Can't root with Exynos Abuse 1.40... But Auto-Root is working fine !
Could you check amount of ram ? I have now 755mb, and before i remember (or i'm drunk) that i had 768mb
Strange...
I downloaded from Samfirmware and installed through ODIN although I lost root I was able to re-root successfully again using chainfire's method.
Sent from my Samsung Galaxy Note II using Tapatalk 2
there are a few other settings in smart mode which are snow, home party or something, there is also a weather app that has been installed
There's a setting in the settings menu called power that I didn't notice before, that allows you to choose when the device shuts itself down. Another thing I've found is that you don't have to keep enabling voice control in the camera app every time you close and open it now.
And just the general responsiveness seems better in the camera app too.
Sent from my GT-N7100 using Tapatalk 2
Can someone check the ram available please ? 755mb max ?
luminouche said:
Can someone check the ram available please ? 755mb max ?
Click to expand...
Click to collapse
Isn't that dependant on what apps you have installed and individual set ups?
apprentice said:
Isn't that dependant on what apps you have installed and individual set ups?
Click to expand...
Click to collapse
He is talking about the max available RAM on the device that is usable.
I don't have the galaxy camera, but the RAM amount can indeed change (The S3 had 7xxMB with ICS and now has 8XXMB in JB)
Skander1998 said:
He is talking about the max available RAM on the device that is usable.
I don't have the galaxy camera, but the RAM amount can indeed change (The S3 had 7xxMB with ICS and now has 8XXMB in JB)
Click to expand...
Click to collapse
Ah, OK. In that case the total I have is 755Mb since the update.
Hope that helps.
Yeah, the value you have when you long press home (Samsung task killer).
In 4.1.1 it seems to me that i had 768 instead of 755.
After Odin update, i also had another 'camera update' during few minutes, on the 1st boot (specific to Galaxy Camera ?)
luminouche said:
Yeah, the value you have when you long press home (Samsung task killer).
In 4.1.1 it seems to me that i had 768 instead of 755.
After Odin update, i also had another 'camera update' during few minutes, on the 1st boot (specific to Galaxy Camera ?)
Click to expand...
Click to collapse
I have 780MB with the ATT stock rom. I will update later to 4.1.2 and see if it changes.
apprentice said:
You can set an option to not automatically fire up the camera when you power on - very pleased by this one!
An icon has appeared on the notification bar - a battery with a recycle sign - to tell you that you have enabled 'Smart Network' mode (turns off network functions when screen is off)
Updated versions of Samsung built in apps naturally
Click to expand...
Click to collapse
I update the rom and found new smart mode like you say, but I don't found the option for disable camra on boot and don't have the battery sign i notification bar.
Can you tell me where you found the option for disable the camera ?
Thank you
David
New Triangle Away
Just to inform the community, I've been helping Chainfire over the past day or so, to get Triangle Away working for our Cameras
And he's done it!
Pic of my camera Before:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pic of download mode After:
He is currently tidying up a few bits but, the next release to hit the Play Store will support the EK-GC100
RavenY2K3 said:
Just to inform the community, I've been helping Chainfire over the past day or so, to get Triangle Away working for our Cameras
And he's done it!
Click to expand...
Click to collapse
Ye !!
Thank you to you RawevnYéK3 and ChainFire, this is great
About my question for how disable camera when start the Camera and where is the icon about the mode "Smart Network" in notification bar, I found the icon, in fact I expect an icon like Wifi, BT, etc, but it's only a small one inform you "Smart Network" are use when you activate it.
But I still don't found where disablecamera on boot
djudenne said:
Ye !!
Thank you to you RawevnYéK3 and ChainFire, this is great
About my question for how disable camera when start the Camera and where is the icon about the mode "Smart Network" in notification bar, I found the icon, in fact I expect an icon like Wifi, BT, etc, but it's only a small one inform you "Smart Network" are use when you activate it.
But I still don't found where disablecamera on boot
Click to expand...
Click to collapse
I've currently set the camera up with a lockscreen so it doesn't extend the lens when I hit the power button, but also, if the last thing the camera had open was the home screen, it opens back up in the home screen when I unlock the device.
Sent from my EK-GC100 using Tapatalk 2

Constant TouchWiz Popup when Home button is pressed

sorry, if this has been brought up, I searched, but didn't find any threads.
Anyways, I would say about 40-50% of the time when I press the Home button, I get this popup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and after I press "TouchWiz Home" I'd hit "Always" and then I get this:
this constantly popups up... well.. again, maybe every other time I hit the Home button... it's quite annoying... can any advice me what do to?
thanks in advance for any tips/advice
Ken
Try task manager and clear the default, then try and set it again and see if it works
radicalisto said:
Try task manager and clear the default, then try and set it again and see if it works
Click to expand...
Click to collapse
Okay, so here's a dumb question, where's the task manager? Is it call something else?
trainerKEN said:
Okay, so here's a dumb question, where's the task manager? Is it call something else?
Click to expand...
Click to collapse
Not a dumb question at all, Push and hold the home button, select the little globe in the bottom left, once you go thru to the next screen, scroll accross to CLEAR DEFAULTS and choose Touch Wiz and hit clear, exit out then try setting TW again and pressing Always.
radicalisto said:
Not a dumb question at all, Push and hold the home button, select the little globe in the bottom left, once you go thru to the next screen, scroll accross to CLEAR DEFAULTS and choose Touch Wiz and hit clear, exit out then try setting TW again and pressing Always.
Click to expand...
Click to collapse
okay, so I'm there, but I don't see TW to clear
When you press the home button the TW asks you to set Just once/ Always yes? -- if you choose always it should store it in there as a default. -
OK, try settings > general > application manager > choose ALL then scroll down to TW - choose TouchWiz Home - It should show 850KB or so in size, If not clear cache then clear data, hit force stop, reboot your phone and see if it stores the data this time.
radicalisto said:
When you press the home button the TW asks you to set Just once/ Always yes? -- if you choose always it should store it in there as a default. -
Click to expand...
Click to collapse
yes, I always press "Always"
radicalisto said:
OK, try settings > general > application manager > choose ALL then scroll down to TW - choose TouchWiz Home - It should show 850KB or so in size, If not clear cache then clear data, hit force stop, reboot your phone and see if it stores the data this time.
Click to expand...
Click to collapse
okay, so I just did it... let's see if it works... I will follow up, thanks!
Hit the home button again and if it doesn't pop up, it's sorted
radicalisto said:
Hit the home button again and if it doesn't pop up, it's sorted
Click to expand...
Click to collapse
ugh, it just did it again
trainerKEN said:
ugh, it just did it again
Click to expand...
Click to collapse
Ok for some bizarre reason it isn't storing local data, I'm at a bit of a loss.
What Model number do you have? and what firmware are you running? - rooted also? any mods installed recently or other launchers?
when you went to cache, did it show 850kb or so in the app itself? as if it was storing the data at all?
You could try a factory reset. I know it isn't ideal and it bugs me when I have had to do one previously. It may fix it. 9 out of 10 times it does.
EDIT: I'm at work so my replies may be a little sporadic or so, but I'll be around to help.
radicalisto said:
Ok for some bizarre reason it isn't storing local data, I'm at a bit of a loss.
What Model number do you have? and what firmware are you running? - rooted also? any mods installed recently or other launchers?
Click to expand...
Click to collapse
the number says SM-N900W8, it's running 4.3, NOT rooted, bone stock, no mods... I just got the phone 2 days ago
radicalisto said:
when you went to cache, did it show 850kb or so in the app itself? as if it was storing the data at all?
Click to expand...
Click to collapse
I don't remember what the number was, but I'm pretty sure it was in the 700kb....
radicalisto said:
could try a factory reset. I know it isn't ideal and it bugs me when I have had to do one previously. It may fix it. 9 out of 10 times it does.
Click to expand...
Click to collapse
I'm going to try the previous instruction again and see if it helps, if not I'll do a factory reset. Not much trouble since I just got the phone 2 days ago...
radicalisto said:
: I'm at work so my replies may be a little sporadic or so, but I'll be around to help.
Click to expand...
Click to collapse
thanks man, I really appreciate your help
What mine shows, let me know what happens when you reset it. Usually does the job especially on the Note 3 lol.
Sent from my SM-N9005 using XDA Premium 4 mobile app
radicalisto said:
What mine shows, let me know what happens when you reset it. Usually does the job especially on the Note 3 lol.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
okay, so I ended up just doing a factory reset... and in the process... there was a system update. I have a feeling when I got the phone at the store, I was flying through the setup process and skipped it. As of right now, it looks like it's working fine :fingers-crossed:
thanks again for all your help... I'm going to pass this along because apparently I wasn't the only one with this issue
Ahh cool, least you got sorted, No problem man. Enjoy the phone
Did you enable Google Now? Disable it, and it will not ask you again.
Sent from my SM-N9005 using Tapatalk
---------- Post added at 10:31 PM ---------- Previous post was at 10:29 PM ----------
Did you enable Google Now? I have mine disable and it stop prompting me to choose TW again. Go ahead and try disable your Google Now.
Sent from my SM-N9005 using Tapatalk
okay... so I wanted to post an update. Truthfully, the issue started up AGAIN! I was sooooo annoyed, I didn't want to post because I figured it was frustrating others reading my issue. Apparently, I wasn't the only person having this issue. I did some search and came across a thread over at Android Central...
here's the thread: http://forums.androidcentral.com/sa...lete-action-using-touchwiz-easy-home-huh.html
anyways, the trick is to uninstall the latest version of Google Search update. JUST TO CLARIFY, this does NOT mean you're actually uninstalling Google Search (because, I mean... there's no way I'd ever use Bing or Yahoo search :laugh: )
You go to your Google Play Store, search "Google Search" and the app will come up... it's already installed so you'll get the options of "Open" or "Uninstall".... You click on "Uninstall" and ONLY the latest version of Google Search will be uninstalled... Google Now, Google Search WILL still be there... But this issue will be gone
So, needless to say, the latest version of Google Search has some kind of bug with TouchWiz or whatever.
Hope this help others in the future
Yes im having this issue too and reverting back to the older version is the solution. This phone has given me many bugs. Totally aint worth the money.
Sent from my SM-N9005 using Tapatalk
Has Google Search bug been resolved?
andresalonika said:
Yes im having this issue too and reverting back to the older version is the solution. This phone has given me many bugs. Totally aint worth the money.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I had this problem and then removed the updates. However, I now see a new update for Google Search dated January 9, 2014. Has anyone tried this update to see if the problem persists?
Maybe tonight I will give it a go.
Thanks
No more touchwiz problem
:good: After upgrading Google Search to the January 9, 2014 yesterday, I have had no more problems with Touchwiz Home stopping notice. It has been about 24 hours since I updated it.
I guess Google resolved the bug.
I'm facing this issue after update to kitkat. I can't uninstall google search update as the version installed in the rom is the last one. Pop up is very boring What can I do ?
Inviato dal mio SM-N9005 utilizzando Tapatalk

[DISCUSSION GROUP] KK firmware problems and help [Z1]

Guys...
If you have any problem related to 681 firmware, please, post it here and let's work together to solve it.
If we continue to spam [NUT] thread he could never read all that and find real problem.
I managed to flash new firmware, root it, deodex it and everything is working so I'm sure I could provide some help if someone need it.
Serajr Xposed is working great, all apps are deodexed and everything is working on LOCKED BOOTLOADER except system mount in recovery...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is the link how to deodex and flash all MODs via recovery on LB (firmware 681) so we don't have to repeat all that here.
CLICK ME
Sent from my C6903 using Tapatalk
Wait, is GravityBox working fine for you? I installed some Xposed module (forgot which one) that works with everything but gravitybox. If gravitybox is enabled then when I press the volume buttons gravitybox and the foreground app FC.
My main problem with KK:The speaker bug. Sometimes the all sounds including ringtone, notifiction and music come from the earpiece speaker. I can fix it by opening the quick settings or plugging in headphones. It's really annoying.
GravityBox will not work on Z1 4.4
Also Serajr Xposed does not work for me. the only option I have enabled is the homescreen rotation (Which I like when the phone is docked) but it cause systemUI.apk to FC
kantk20111 said:
Wait, is GravityBox working fine for you? I installed some Xposed module (forgot which one) that works with everything but gravitybox. If gravitybox is enabled then when I press the volume buttons gravitybox and the foreground app FC.
My main problem with KK:The speaker bug. Sometimes the all sounds including ringtone, notifiction and music come from the earpiece speaker. I can fix it by opening the quick settings or plugging in headphones. It's really annoying.
Click to expand...
Click to collapse
No...I'm not using Gravity, I'm using X Blast and Xperia Xposed.
BTW - @serajr will release KK version of Xperia Xposed in a next few hours (even this one is working OK, some things had to be updated).
For that speaker problem...
Restart to recovery and wipe both cache - that will do the job.
Sent from my C6903 using Tapatalk
funky0308 said:
No...I'm not using Gravity, I'm using X Blast and Xperia Xposed.
BTW - @serajr will release KK version of Xperia Xposed in a next few hours (even this one is working OK, some things had to be updated).
For that speaker problem...
Restart to recovery and wipe both cache - that will do the job.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
For the speaker problem I tried wiping both the cache more than 5 times and i still face the speaker problem.....restarting the phone will fix this for some time and then the same issue....any other suggestions???
puneethv said:
For the speaker problem I tried wiping both the cache more than 5 times and i still face the speaker problem.....restarting the phone will fix this for some time and then the same issue....any other suggestions???
Click to expand...
Click to collapse
I bump into same problem but I was using smart features (smart calling), when I flash ROM from the scratch (only way to remove all MODs that copy their lib and etc files into system) - all gone...
I know flashing all over again is big job but it helped me...
I can't claim 100% smart features do that to OS but I flashed absolutely the same ROM (NUT 681 flashable zip and stripped ftf) and it's OK now...my device ring again like it should...
Sent from my C6903 using Tapatalk
gregbradley said:
GravityBox will not work on Z1 4.4
Also Serajr Xposed does not work for me. the only option I have enabled is the homescreen rotation (Which I like when the phone is docked) but it cause systemUI.apk to FC
Click to expand...
Click to collapse
Home rotation, power menu, hide apps from app drawer - working great on my device...
But, as serajr already announced - he'll release new module for KK today so it'll work for all...
Without FC or any other problems...
Sent from my C6903 using Tapatalk
Is anyone else losing mobile data and LTE when flashing .681? If so just reset APN to default and network settings to LTE. Maybe I'm just a noob, but it took me hours to figure this out yesterday. I figured out the LTE within minutes but the APN took me a bit.
Sent from my C6906 using XDA Premium 4 mobile app
TheJeremyWhite said:
Is anyone else losing mobile data and LTE when flashing .681? If so just reset APN to default and network settings to LTE. Maybe I'm just a noob, but it took me hours to figure this out yesterday. I figured out the LTE within minutes but the APN took me a bit.
Sent from my C6906 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You don't have to enter APN manually.
Open setting and go to more, then just hit last tab/button and wait a bit...
Also, many carriers have their own system to set all automatically...
Most probably you have to send sms with some word and you'll receive all settings
Sent from my C6903 using Tapatalk
Solid Explorer was apparently able to replace the "recovery.twrp.cpio.lzma" file in the system/bin folder and now I'm able to mount r/w through solid explorer which used to fail previously, but TWRP is still not working.
I'm having this problem on my phone, the problem is system ui is running every time and is waking lock my phone, I didn't never have this problem before, any help?
Sent from my C6906 using Tapatalk
funky0308 said:
You don't have to enter APN manually.
Open setting and go to more, then just hit last tab/button and wait a bit...
Also, many carriers have their own system to set all automatically...
Most probably you have to send sms with some word and you'll receive all settings
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Tried that first, but at the time I could not access mobile data or wifi to download the settings. Wifi would not turn on, and the toggle was grayed out. I have since downgraded back to .136 because I am dependent on Gravity Box and I HATE the new KK "Quick Settings" panel. Nothing quick about it, adds an extra click compared to JB
Add to the thread the notorious notification tone "skips".
Any notification tone will "skip"/glitch when playing for a notification. Happens at the very beginning of your notification sound/tone
No issues when in the sounds section selecting which tone to use. No problems with phone ringtone or playing music. Happens sporadically so not every notification will glitch but happens 95% of the time.
Stock c6903 on tmobile. Unrooted and all fresh until.
Sent from my C6903 using xda app-developers app
dydu said:
Solid Explorer was apparently able to replace the "recovery.twrp.cpio.lzma" file in the system/bin folder and now I'm able to mount r/w through solid explorer which used to fail previously, but TWRP is still not working.
Click to expand...
Click to collapse
If you managed to replace that file then you always had rw in /system.
How could you replace that file without rw in system?!
Sent from my C6903 using Tapatalk
Simple Solution
TheJeremyWhite said:
:I HATE the new KK "Quick Settings" panel. Nothing quick about it, adds an extra click compared to JB
Click to expand...
Click to collapse
Just add a shortcut to 'settings' on your homescreen. Now you have lightening fast access.
I was having the volume bug and am running stock version of software downloaded from pc companion. I reinstalled the software again and hard reset it and still had the issue. It stopped happening after I removed my memory card. Still suffer from the stuttering notifications, though. The only other weird thing is when I wake up the phone I see something disappear in the top left corner of the screen. It looks like there is a notification in the bar but it vanishes by the time the screen fully draws itself.
Sent from my C6906 using Tapatalk
+1.....same thing something appears on the notification bar for a split second night then disappear.....also what's with Google sd card issues in KK because of this many of my apps which could save data on my sd card cannot save anything.....i cannot change the directory in the apps to sdcard....one of the examples in the the screenshot of double twist player......
Sent from my C6902
camera problem on unlocked bootloader
Sorry if i am posting the same question at too many places
I have C6902 with unlocked bootloader.
I falshed NUT's KK (tried doing a full wipe & cleaning camera data) but i am facing problem with camera. It opens but once i press shoot button is stops responding.
Just wanted to know if anybody knows exact fix for this problem.
Thank you
puneethv said:
+1.....same thing something appears on the notification bar for a split second night then disappear.....also what's with Google sd card issues in KK because of this many of my apps which could save data on my sd card cannot save anything.....i cannot change the directory in the apps to sdcard....one of the examples in the the screenshot of double twist player......
Sent from my C6902
Click to expand...
Click to collapse
Well one more reason to root android phones =)
Lähetetty minun C6903 laitteesta
having wifi problems with KK, i can connect at home but not at work, wtf!! every other device on my desk is connected, i even reset the router and it wont connect (it show the network, just wont connect)

Yoga Tab 3 Pro - post your tips and tricks to reduce lag.

As a happy yoga tab 3 pro user you will already know that your tablet hangs, freezes and can have some general lag all over the system! Very unsatisfactory (I actually love it by the way).
So if you have anything to share which you feel improved your over all user experience post it here.
here's my tip, freeze everthing! I used titanium backup and froze the apps that I don't use but were clearly using my ram.
uploading a couple of screen shots. One shows the apps that I have frozen and the other shows running apps.
So just look at was is running and if you don't need it freeze it! There was loads of crap running that I would never use.
Whole system feels alot snappier without a shadow of a doubt.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i knew it you were a hacker... that keyboard exposed you!
I highly recommend leaving system apps unfrozen. If you can't uninstall or disable it through the settings menu you shouldn't be removing it. That's why Google and Lenovo restrict apps from being uninstalled. Bloatware on the other hand should be nuked into star dust.
Edit: freeing ram also does nothing. The OS manages ram. If a foreground app needs more ram the OS allocates it. If there isn't enough(extremely rare. 2gb is a lot for a phone/tablet) the OS will automatically free ram from non-critical apps.
walther1337 said:
I highly recommend leaving system apps unfrozen. If you can't uninstall or disable it through the settings menu you shouldn't be removing it. That's why Google and Lenovo restrict apps from being uninstalled. Bloatware on the other hand should be nuked into star dust.
Edit: freeing ram also does nothing. The OS manages ram. If a foreground app needs more ram the OS allocates it. If there isn't enough(extremely rare. 2gb is a lot for a phone/tablet) the OS will automatically free ram from non-critical apps.
Click to expand...
Click to collapse
I can only guess from your response that you do not own a lenovo tab 3 pro, if you did you would know two things:-
Firstly Lenovo clearly do not know what they are doing or people would not have a tablet with fine hardware lagging all over the system..
Secondly, 2GB is clearly enough unless the clever developers at lenovo released the tablet with beta ware applications and a kernel that strangles your available ram by using 1.1GB for itself!!!
And lastly thanks for mentioning that people should be careful freezing system apps, i should have made that clear in my post. I have frozen all that is shown in my screen shot and have had no adverse effects.
Sent from my Lenovo YT3-X90F using Tapatalk
i don't know how (much) they will impact on the memory issue that affect YT3Pro but seeing the list @joesnose posted you can safely tweak those services (they're all crap or useless services)
joesnose said:
I can only guess from your response that you do not own a lenovo tab 3 pro, if you did you would know two things:-
Firstly Lenovo clearly do not know what they are doing or people would not have a tablet with fine hardware lagging all over the system..
Secondly, 2GB is clearly enough unless the clever developers at lenovo released the tablet with beta ware applications and a kernel that strangles your available ram by using 1.1GB for itself!!!
And lastly thanks for mentioning that people should be careful freezing system apps, i should have made that clear in my post. I have frozen all that is shown in my screen shot and have had no adverse effects.
Sent from my Lenovo YT3-X90F using Tapatalk
Click to expand...
Click to collapse
Why would I post in a thread if I don't have the device? If you're having so many issues you should flash the stock rom in the root thread if you have root, or call Lenovo support. There is definitely something wrong with your device.
Are you saying your kernel is not hogging over a GB of memory?
Sent from my GT-N7105 using Tapatalk
Thread title needs changing to how to fix everything!!!
Is it just me? Usb otg works fine.for usb storage devices, unfortunately doesn't appear to suport other usb devices!
Anyone else can you confirm you are able to get any mouse, keyboard, etc working?
Sent from my SAMSUNG-SGH-I317 using Tapatalk
No problem here with USB mouse. Still trying to find a solution for exfat storage though.
Great, thanks @Shug69. I will have to find another adaptor to try.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Heres a little tip posted by bigdoors over on the lenovo forums.
Under developer options:
I set all the animations and transitions to .5x
.I checked "Force GPU Rendering"
I'also checked "Disable HW overlays.
Sent from my Lenovo YT3-X90F using Tapatalk
Thanks @Samiej6 for this one.
Also, I successfully mounted my exFAT sdcard with the help of lurker0's post here: http://forum.xda-developers.com/showthread.php?t=3126394.
Sent from my GT-N7105 using Tapatalk
Just found a way to set a custom image for the lock screen.
To set the lock screen image, you have to use Settings/Display/Wallpaper then LenovoWallpaper, and by default you can only select from the default Lenovo images.
To add your own image to this gallery, you'll need to be rooted, and install the Root Explorer app.
Copy your Lock screen image to your SD card, and create 2 more copies of the image file and add the following extensions;
<img>_land.jpg
<img>_land_small.jpg
<img>_port.jpg
Then copy these files using Root Explorer to /system/etc/localwallpaper
Also in the /system/etc/localwallpaper directory, you'll need to edit the customed_wallpaper.xml file to add a new line;
<wallpaper name="<img>_land"/>
Save and close the .xml file, and force close LenovoWallpaper app via Settings/Apps/All.
Now go back into Settings/Display/Wallpaper and launch LenovoWallpaper again, you should now see a new blank row at the bottom of the Lenovo images, which if you tap will load your image file, then just untick the Desktop option so that only the Lock screen image is changed.
rfsteel said:
Just found a way to set a custom image for the lock screen.
To set the lock screen image, you have to use Settings/Display/Wallpaper then LenovoWallpaper, and by default you can only select from the default Lenovo images.
To add your own image to this gallery, you'll need to be rooted, and install the Root Explorer app.
Copy your Lock screen image to your SD card, and create 2 more copies of the image file and add the following extensions;
<img>_land.jpg
<img>_land_small.jpg
<img>_port.jpg
Then copy these files using Root Explorer to /system/etc/localwallpaper
Also in the /system/etc/localwallpaper directory, you'll need to edit the customed_wallpaper.xml file to add a new line;
<wallpaper name="<img>_land"/>
Save and close the .xml file, and force close LenovoWallpaper app via Settings/Apps/All.
Now go back into Settings/Display/Wallpaper and launch LenovoWallpaper again, you should now see a new blank row at the bottom of the Lenovo images, which if you tap will load your image file, then just untick the Desktop option so that only the Lock screen image is changed.
Click to expand...
Click to collapse
Thanks for the post. I might add that I have changed the lock screen wallpaper without accessing any system files. Just changed it in the lenovo launcher settings then switch to whatever launcher I like and lock screen sticks.
Sent from my GT-N7105 using Tapatalk
Today I just had enough of all the freezes,lags etc etc and decided to give my pro3 back to the store. Fortunately I decided to give it a last chance. I copied most apps to memory card, did a soft reset (it switched off and refused to switch back on !!) Long long press on power button btw. ) Then enabled zooming in Chrome browser. To my surprise this bustard started working like a charm, no more lagging, freezing, no need to root, everything's seamless now. Lots of nerves it cost but eventually the tablet works like it should from the start.
"shadow-dozing"...
Just tick Settings/Power_manager/Background_app_management : a kind of "shadow-dozing"...
I also disable Google' stuff versus UC Browser (tailored for Android System Webview).
Battery Problem?
Hi Guys,
I had the Lenovo Tab 3 Pro, and returned it for poor battery. The estimations are subjective, but Aida64 reported a 4400 battery inside. I know there are 2 batteries, one of 4400 and one of 5800 or so. Can mine be defective? I guess it also had the battery drain over night issue.....I didn;t expect it to hold more than 4-6 hours of full-time use.
I returned it to get the Plus, and in this one, Aida shows a 2000 mAh battery.....
Should i drop them both, or get back to the PRO, considering that the reports are both false, and the battery will last as expected? I understand that the PRO should be better in terms of performance, despite being older?
Radu
I have a question for experts: which app can I use for downclocking CPU to 1440Mhz?
An user said downclocking to 1440Mhz doesn't slow the tablet. I tried nofrillsCPU, but it didn't regognize root; kernel adiutor doesn't save settings at reboot.
Thanks in advance.

Categories

Resources