Hello guys, I have a problem with this phone.
First I flashed the euro+fastboot kdz... The phone booted and worked awesome but It wasn't showing recovery or LG logo.
Somewhere on this forum I read that you had to flash v10c and then v20B to fix this.
I did so, v10c failed, but v20B flashed correctly, but it didn't boot up.
I'm still stuck here, the phone is completely dark, but when I connect it to the pc I can see it with ADB, It just doesn't go into fastboot mode (because of v20B I guess). But flashing the euro kdz won't work anymore, and I'm stuck in ADB without fastboot.
Hope you guys can help me,
Juxter.
Juxter said:
Hello guys, I have a problem with this phone.
First I flashed the euro+fastboot kdz... The phone booted and worked awesome but It wasn't showing recovery or LG logo.
Somewhere on this forum I read that you had to flash v10c and then v20B to fix this.
I did so, v10c failed, but v20B flashed correctly, but it didn't boot up.
I'm still stuck here, the phone is completely dark, but when I connect it to the pc I can see it with ADB, It just doesn't go into fastboot mode (because of v20B I guess). But flashing the euro kdz won't work anymore, and I'm stuck in ADB without fastboot.
Hope you guys can help me,
Juxter.
Click to expand...
Click to collapse
Try again.
First refer to this thread:
dont see recovery and boot logo - http://forum.xda-developers.com/showthread.php?t=825173
And the original post by: Feuerbard
#22 - http://forum.xda-developers.com/showpost.php?p=9457010&postcount=22
Thumbs up solution to get logo
solution from 4PDA
flash first french firmware _hxxp://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ANEUBK/V20a_00/V20A_00.kdz
(you must make kdz flasher fullscreen and change right option to CS_EMERGENCY)
dont boot android , remove accu reinsert them and press vol - and plug usb cable into port on mainboard - you must get in download mode )
flash firmware with fastboot (i use CIS _hxxp://narod.ru/disk/26675062000/V20B_00.kdz.html)
boot android and flash this firmware _hxxp://narod.ru/disk/25473801000/out.kdz.html
after this you must see all logo ( LG , Motion LG , Android )
after this flash firmware you like (custom fastboot e t с)
maybe some point is not needed but this tutorial work 100% and tested by myself
Click to expand...
Click to collapse
And the post by namco:
in post -- #45 - http://forum.xda-developers.com/showpost.php?p=10241289&postcount=45
namco said:
So after 4 5 6 or maybe 10 times, it will finally become working, that's what you're saying?
This is really odd, something's wrong with these phones lol
Okay, i'll load myself with a ton of patience and repeat the steps as per the instructions. This is *exactly* how i am doing it, with all the details:
1) Using the French v20A ROM - http://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ANEUBK/V20a_00/V20A_00.kdz and this Russian one - http://narod.ru/disk/25473801000/out.kdz.html
2) Take out the battery, SIM card and SD card
3) While holding the Vol - button, plug USB into phone so that the phone goes into Download Mode
4) Run the KDZ Updater, put it into CS_Emergency mode
5) Select the French V20A rom and flash it
6) When it's finished (immediately after the DOWNLOAD MODE letters vanish), i pull out the USB plug from the PC, so that the phone doesn't boot.
7) Again hold Vol - and reinsert USB to put the phone back in Download Mode
8) In KDZ Updater (still in CS_Emergency mode) select out.kdz and flash it
9) Let the phone boot into Android
At this point i STILL don't have a boot animation, should i keep doing this until i see one appear?
When it (if) finally appears, i just flash my own ROM, do a factory reset and it should stay that way, correct?
I guess my impossibility to access recovery mode also has something to do with this...
Click to expand...
Click to collapse
Note: For above step: 1) Using the French v20A ROM
-- as long as you have the ROM of v20 with fastboot option, it doesn't really matter.
================
For out.kdz file alternate download link by fisher:
#59 - http://forum.xda-developers.com/showpost.php?p=10426771&postcount=59
Originally Posted by fishears
Try this:
http://www.mediafire.com/?u2mhgrbva8dr5cm
================
Hope this helps.
Thanks for the reply, I actually fixed it following this:
hxxp://modaco.com/topic/329863-how-to-raise-gt540-from-the-dead/
Once I got fastboot with that cwm.kdz I reflashed a fastboot rom, and from that one I could use the KDZ updater again, following the French kdz procedure...
The phone now is fully working recovery and bootanimations again
Related
Hello,
I have LG G2 (d802 polish version) with 4.2 rooted stock rom, Installed pac rom two days ago and then (stupidly) changed build.prop ro.sf.lcd_density value from 480 to 240 and since then phone is bricked It's either booting forever (LG logo) or booting all the time to recovery mode( I have installed CWM recovery, and later Philz CWM). Now the good side is:
- I can get to download mode and connect to LG Flashtool. .When flashing the tot file BIN_LGD802AT-00-V10b-EUR-XX-SEP-07-2013-16G from XDA Storagecow.eu site, I can connec the phone via USb, change the port to 41 and it starts flashing. HOWEVER, when flashing the stock rom, LG flashtool skips all the partition and flashes it in seconds, then stops at 84 percent, tries to get factory reset,waits for it120 sec and then I have the error DOWNLOAD FAILS. What can be the problem here? Earlier I flashed the same bin file without any problems, and it didn't skipped through partitions , and everything went fine. WTF? Seriously maybe someone knows because I am desperate here. Already trying 2 days to figure it out. Haven't tried the KDZ method yet, because I have Windows 8,1 , and I am having permission errros while trying to flash. I will atttach a screenshot of LG flashtool skipping all the partitions whil flashing soon.
Please HELP!
clarification
In any case I am just asking why Lg Flash Tool is skipping all the partitions and flashin properly and then stopping at 84 and not restarting ? How can I flash back to stock? Any advice appreciated. thanks.
anyone can help?
Allrite bro..i oso facing a same problem with bootloop..i was at 4.2.2 stock rom with rooted and with twrp recovery too. After i update to ota 4.4 kitkat my g2 was bricked..its just boot with LG Logo and is was not boot up. Allrite. U can try to this tutorial. .pls doublecheck izzit u (flashing DLL) file was correct, and izzit its.match with firmware that u download? Pls.ensure tat..if that both file was correct and matching, is should be ok when u flashing. ..hope i can sharing to u. And sori about my Bad english..
Sent from my LG-D802 using xda premium
I have the same problem!! Bootloop at LG logo and diode flshing. No matter what .kdz i flash or .TOT always i can get download mode, but flashing any file doesn't help.
collller said:
I have the same problem!! Bootloop at LG logo and diode flshing. No matter what .kdz i flash or .TOT always i can get download mode, but flashing any file doesn't help.
Click to expand...
Click to collapse
Did you try to let LG Mobile Support Tool download and flash matching ROM file automatically? That worked for me when I was stuck in LG logo boot loop. In order to make Support Tool reflash ROM select menu Extra Featrues and then Reset Upgrade Error (or something like that - having tool in german here ) Of course phone must be in download mode and connected to PC.
Hope this helps
After kdz/tot flashing you might have to reset the phone.
either:
Hold volume down + power, wait for lg logo, release keys and hold them again (then proceed to factory reset)
OR
Hold volume down + power, wait for lg logo, release keys and hold volume up + volum down (then proceed to factory reset)
Did you solve this?
Guys i need your help, I screwed my phone BADLY. I have D802 from Hong Kong
TOT flashing method starts, flash until 80%, phone restarts, the FlashTool gives meddage FBOOT fail. Flashing fails.
Phone restarts until LG logo and the diode is blinking colors.
There is only download mode available.
Please is there ANY solution? Even guys on IRC #lg-g2 channel couldn't help me.
What i did before:
1. rooted my phone
2. instal autorec, which screwed phone. after that only flashboot mode worked
3. i flashed laf.img to restore download mode, it worked
4. i flashed aboot, tz, rpm, it allowed me to boot into system but screwed touchscreen
5. i flashed TOT with dll from this post http://forum.xda-developers.com/showthread.php?t=2687768
Bricked D802 FlashTool Fail Fix
but then phone freeze at LG logo and nothing happens. No recovery, no fastboot, only download mode.
please! anyone knows what to do?
collller said:
Guys i need your help, I screwed my phone BADLY. I have D802 from Hong Kong
TOT flashing method starts, flash until 80%, phone restarts, the FlashTool gives meddage FBOOT fail. Flashing fails.
Phone restarts until LG logo and the diode is blinking colors.
There is only download mode available.
Please is there ANY solution? Even guys on IRC #lg-g2 channel couldn't help me.
What i did before:
1. rooted my phone
2. instal autorec, which screwed phone. after that only flashboot mode worked
3. i flashed laf.img to restore download mode, it worked
4. i flashed aboot, tz, rpm, it allowed me to boot into system but screwed touchscreen
5. i flashed TOT with dll from this post http://forum.xda-developers.com/showthread.php?t=2687768
Bricked D802 FlashTool Fail Fix
but then phone freeze at LG logo and nothing happens. No recovery, no fastboot, only download mode.
please! anyone knows what to do?
Click to expand...
Click to collapse
First double check that you can enter recovery. Hold the power button until the phone completely shuts down. Wait 5 seconds. Then hold power + volume down until it vibrates and LG logo shows up. Release both buttons. Then press them again quickly and hold them. You will enter recovery. Or the phone my offer to do a factory reset which btw won't happen since it will go to recovery by pressing the power button 2 more times. If you have TWRP then you are good. Install ADB on your PC and the LG drivers. When you have ADB, Download (check everything) related to JB and KK. Reboot the PC. Connect your phone with the cable. The PC will not recognize the phone. You have to use a little trick in the device manager first:
Press the windows key + pause/break and click on device manager. Right click on the faulty device with the yellow exclamation mark and hit properties then update driver. Click on the second option then from the list search for ADB or ADB device or something along those lines. Select the LG driver and hit OK. Unplug the phone. The phone must be in recovery still. Inside recovery hit advanced and look for ADB sideload. Check both checkboxes on what to wipe. If you don't already have a rom you want to flash, then use this one. It is a very stable and fast one and I only recommend it because I had the same issue as you and it worked for me. Download that rom and rename the zip file to rom.zip and copy it to the location where your adb.exe file is. You will also need the KK baseband modem otherwise auto rotation won't work. Search for it on the D802 dev thread. Now on your PC, open a command prompt inside the directory you copied the rom.zip (shift + right click) and hit "open command prompt here". Type in:
adb devices (this will ensure that your connection with the phone is alive. If you see some weird string then it works. That is the name of the phone btw)
adb sideload rom.zip
Click to expand...
Click to collapse
Installation will now begin. You are saved.
Of course all the above only applies if you have acces to recovery. But I wonder how could you screw that one up. It's literally a simple apk installation and a 1 button solves everything app. If you don't have recovery you can still try to save your phone with download mode. Here is a link that maybe helps but I havent tested it
And one last thing: Don't use Flashtool.
thanks man. But unfortunately no recovery. The phone ONLY goes to download mode.
I will try to flash .kdz because tot method didn't work. If .kdz fails then i don;t know.... expensive paper holder
collller said:
thanks man. But unfortunately no recovery. The phone ONLY goes to download mode.
I will try to flash .kdz because tot method didn't work. If .kdz fails then i don;t know.... expensive paper holder
Click to expand...
Click to collapse
I have the same problem as you, my PC don't recognize the phone.
try resetting it with combo keys
Guys plz help
D802 flashed with wrong laf.img now i have this error in lg flash tool.
Same problem here only download mode is working and it gives error when I am trying to install tot LAF retrieveGPT() Failed. is there any solution for it?
if its from hong kong are you sure its a d802 and not a ls980 or d800? maybe its a refurbished phone.
raptorddd said:
if its from hong kong are you sure its a d802 and not a ls980 or d800? maybe its a refurbished phone.
Click to expand...
Click to collapse
when mine use to work fine it showed d802 but mother board is writen ls980 ...
what should i do ?
devil ££ sama said:
when mine use to work fine it showed d802 but mother board is writen ls980 ...
what should i do ?
Click to expand...
Click to collapse
then your phone is refurbished, if motherboard shows ls980 then you must go back to stock. and from now on use ls980 stuff thats your variant.
flash original LG firmware going back to stock to wipe all and start fresh and new..
how to on link below.
http://forum.xda-developers.com/showthread.php?t=2432476
raptorddd said:
then your phone is refurbished, if motherboard shows ls980 then you must go back to stock. and from now on use ls980 stuff thats your variant.
flash original LG firmware going back to stock to wipe all and start fresh and new..
how to on link below.
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
so i force inter qsusb_ bluck and use skrtool to flash ls980 partition then flash sprint stock rom ?
(in case i wanted to install twrp and install cloudy rom i should use autorec for ls980 varaint ? )
devil ££ sama said:
so i force inter qsusb_ bluck and use skrtool to flash ls980 partition then flash sprint stock rom ?
(in case i wanted to install twrp and install cloudy rom i should use autorec for ls980 varaint ? )
Click to expand...
Click to collapse
when i had QUSB_BULK error and many drives all i did was go back to stock.. using flashtools. and stock firmware..TOT method.
sprint is ls980 then yes, and yeap, from now on use autorec for ls980.. all that you use should be for ls980. goo luck
on the QHUSB i just went into download mode and flash then it worked okey.
raptorddd said:
when i had QUSB_BULK error and many drives all i did was go back to stock.. using flashtools. and stock firmware..TOT method.
sprint is ls980 then yes, and yeap, from now on use autorec for ls980.. all that you use should be for ls980. goo luck
on the QHUSB i just went into download mode and flash then it worked okey.
Click to expand...
Click to collapse
i did every thing right fone stared am i updated to lolipop but nfc and network or sim card don't work ( any fix ? i use algerian operator sim card )
devil ££ sama said:
i did every thing right fone stared am i updated to lolipop but nfc and network or sim card don't work ( any fix ? i use algerian operator sim card )
Click to expand...
Click to collapse
was it working before.?
http://forum.xda-developers.com/showpost.php?p=66244741&postcount=6567
raptorddd said:
was it working before.?
http://forum.xda-developers.com/showpost.php?p=66244741&postcount=6567
Click to expand...
Click to collapse
Yes it was but on the old software witch reconized the phone as d802.....+ am getting activation message every time am connected
devil ££ sama said:
Yes it was but on the old software witch reconized the phone as d802.....+ am getting activation message every time am connected
Click to expand...
Click to collapse
post your question here explan in detail all you did and where are you now , i hope you get help here.. then when fix post back with the fix.
http://forum.xda-developers.com/showthread.php?t=2432476
huzaifaas said:
D802 flashed with wrong laf.img now i have this error in lg flash tool.
Click to expand...
Click to collapse
Have the same issue on D802 G2 here. How'd you solve it?
hello guys,im new here i need your help..
I bricked my d802 today,i was on stock kitkat rom,what i did was rooted my device with towel root and used Autorec to install recovery,it installed successfully,then i clicked ''go to recovery'' then all i get were white lines on one side of screen and rest of screen is black(cant see anything).. after digging for hours i came to know that it is because of different Kernel version,but now i want to know how can i flash patched Kernel? as my device is bricked.. It is also not going into download mode so i cant also flash a stock rom.. tried Adb but it is not detecting my device... im completely lost
A tutorial or help will be appreciated.Thanks im waiting for your replies
EDIT:
i used fastboot commands n flashed some img. files..now my display shows up(dull white lines are still on it)..i can boot into download mode now..i flashed kdz stock rom it completed successfully.. but after reboot it is stuck on lg logo with led on... i did hard factory reset(holding volume down key + power button) but it is still stuck at lg logo.. i can still boot into download mode and i dont have a custom recovery installed what should i do now?
can i flash custom recovery using fastboot command? because ADB is not detecting my device. but computer is detecting my device(it also installed three drivers automatically)
And i flashed D80220a_00.kdz stock rom Indian version..should i try some other KDZ aswell? reply please thanks
have a similar issue with my d805. stuck in boot logo and download mode doesnt do anything to help me. someone please help
guys i really need your help,please guide me
kenennaoyeka said:
have a similar issue with my d805. stuck in boot logo and download mode doesnt do anything to help me. someone please help
Click to expand...
Click to collapse
any luck?
none bro....i sent my phone in to an XDA Super Contributor in the LG G2 section. He was in California. Try to find someone to help you around your city or country. Sorry man. If he gets it done, i would ask him how he went about it and let you know.
ahmeee123 said:
any luck?
Click to expand...
Click to collapse
okay,i figured out my problem i have d800(i removed back cover to check) while i was flashing kdz n tot. of d802,now my screen is messed up,no download mode,no recovery and no fastboot,it just stuck at lg logo with led flashing,my pc detect it as Lg androidnet phone.. what can i do now? anybody help thanks
same issue
ahmeee123 said:
hello guys,im new here i need your help..
I bricked my d802 today,i was on stock kitkat rom,what i did was rooted my device with towel root and used Autorec to install recovery,it installed successfully,then i clicked ''go to recovery'' then all i get were white lines on one side of screen and rest of screen is black(cant see anything).. after digging for hours i came to know that it is because of different Kernel version,but now i want to know how can i flash patched Kernel? as my device is bricked.. It is also not going into download mode so i cant also flash a stock rom.. tried Adb but it is not detecting my device... im completely lost
A tutorial or help will be appreciated.Thanks im waiting for your replies
EDIT:
i used fastboot commands n flashed some img. files..now my display shows up(dull white lines are still on it)..i can boot into download mode now..i flashed kdz stock rom it completed successfully.. but after reboot it is stuck on lg logo with led on... i did hard factory reset(holding volume down key + power button) but it is still stuck at lg logo.. i can still boot into download mode and i dont have a custom recovery installed what should i do now?
can i flash custom recovery using fastboot command? because ADB is not detecting my device. but computer is detecting my device(it also installed three drivers automatically)
And i flashed D80220a_00.kdz stock rom Indian version..should i try some other KDZ aswell? reply please thanks
Click to expand...
Click to collapse
Hello
I have bought my Lg g2 d802 few days ago and when I tried to root it and install recovery using autorec the phone screen went black after rebooting into recovery and still in that state.. no led, no download mode , no recovery nothing else just white lines on left corner.... I tried it to get its software repair but they said that the lcd has been fused and need to be replaced ...
I tried to connect it to pc and it is showing marshall london adb interface and in another pc it is showing Android with yellow mark which turned in to Android adb interface after installing drivers from internet
I tried fastboot.exe and adb.exe but no device found error in adb mode but some commands working as fastboot..
I want to know which partitions u flashed using fasboot and how because when i tried to flash it says cant load XXX.img (xxx belongs to the name of partition i flashed)
same problem is here....u found any solution???
AutoRec got my LG D802 bricked and now all i see white lines on screen. Can anyone help plzzzz
Hello, today i tried to flash from recovery this lollipop zip: http://forum.xda-developers.com/lg-g2/development-d802/rom-stock-30d-flashable-zip-t3070383 and flashed immediately TWRP also.
Now when i boot up the device I get a critical demigod error screen from which I can enter Download mode.
So i tried to install v30a .kdzwith flashtool but the installation fails...
Any suggestions? D:
I can only get to download mode, the phone is correctly recognized from the pc and LG Mobile Support Tools sees the device but with SW OPTIMUSG3 1.4.1 (the rom i had when I flashed Lollipop)!
diegz said:
Hello, today i tried to flash from recovery this lollipop zip: http://forum.xda-developers.com/lg-g2/development-d802/rom-stock-30d-flashable-zip-t3070383 and flashed immediately TWRP also.
Now when i boot up the device I get a critical demigod error screen from which I can enter Download mode.
So i tried to install v30a .kdzwith flashtool but the installation fails...
Any suggestions? D:
I can only get to download mode, the phone is correctly recognized from the pc and LG Mobile Support Tools sees the device but with SW OPTIMUSG3 1.4.1 (the rom i had when I flashed Lollipop)!
Click to expand...
Click to collapse
tried lg flash tool? what error you get it stops 2%?
can you reboot recovery with keys or some kind of adb reboot recovery?
OverClockeD_GR said:
tried lg flash tool? what error you get it stops 2%?
can you reboot recovery with keys or some kind of adb reboot recovery?
Click to expand...
Click to collapse
Thanks for the reply!
It stops at 2% and i get the error in the image.
I tried with 30a, 20h and 20f :/
It's a pain mainly because it's my only phone!
diegz said:
Thanks for the reply!
It stops at 2% and i get the error in the image.
I tried with 30a, 20h and 20f :/
It's a pain mainly because it's my only phone!
Click to expand...
Click to collapse
ye i had this problem when tried to kdz from optimusg3...cause phone recognized not as d802 i think.. i flashed a stock rom zip format throught recovery and after i was able to flash kdz..
can you try this
http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
if you enter recovery mode somehow then its easy just flash a stock rom
or just flash a rom with tot methode
OverClockeD_GR said:
ye i had this problem when tried to kdz from optimusg3...cause phone recognized not as d802 i think.. i flashed a stock rom zip format throught recovery and after i was able to flash kdz..
can you try this
http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
if you enter recovery mode somehow then its easy just flash a stock rom
or just flash a rom with tot methode
Click to expand...
Click to collapse
I can only go to download mode and the adb seems to not recognize the device from there
diegz said:
I can only go to download mode and the adb seems to not recognize the device from there
Click to expand...
Click to collapse
As said above, you should try .tot method; I was like you, .kdz didn"t work, but .tot method works perfectly. You'll be on 4.2.2, 'cause .tot method only support 4.2.2 version of android on D802, but you can upgrade after with .zip rom or re-try .kdz method.
Check second part of this tutorial : http://forum.xda-developers.com/showthread.php?t=2432476 ( "2015 (updated with pictures) TOT method" ).
Yeah, final thing: if, after .tot method you're stuck in bootloop, factory reset your phone (power off, then volum down + power key, wait for LG logo, release buttons, then volum down + power key again, and your phone should work like a charm). Let us know if it work!
casual_kikoo said:
As said above, you should try .tot method; I was like you, .kdz didn"t work, but .tot method works perfectly. You'll be on 4.2.2, 'cause .tot method only support 4.2.2 version of android on D802, but you can upgrade after with .zip rom or re-try .kdz method.
Check second part of this tutorial : http://forum.xda-developers.com/showthread.php?t=2432476 ( "2015 (updated with pictures) TOT method" ).
Yeah, final thing: if, after .tot method you're stuck in bootloop, factory reset your phone (power off, then volum down + power key, wait for LG logo, release buttons, then volum down + power key again, and your phone should work like a charm). Let us know if it work!
Click to expand...
Click to collapse
Trying the tot method...
But can't even do the factory reset cause as soon as the LG logo appears I get the critical error!
diegz said:
Trying the tot method...
But can't even do the factory reset cause as soon as the LG logo appears I get the critical error!
Click to expand...
Click to collapse
do tot methot and it wil work follow this instructions get the tot files and the right dll i copy paste from a guy that had optimus and worked like this on him
"My problem was the infamous 2% bug with the KDZ. I think reason for this is the wrong device ID set in the 'build.prop' by the G3 rom for the G2. The flash tool expects a G2 but sees a G3.
I did not find a workaround for this BUT there is one for the TOT method. You will need:
- LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.1 2.3.exe (version does not matter)
- Setup_LGFlashTool_1.8.1.1023.exe - for flashing of a TOT
- LGUP_8974.dll - this is needed for the flash tool to accept all TOTs
- the right TOT for your device
Please google these, I just checked and found them all. You can also find instructions for them.
Install drivers and LGFlashTool then start it.
Start smartphone in download mode by holding the volume up key while plugging USB in PC. Phone must be off.
Wait for the device recognition then change COM port of the new device in Windows device manager to something between 41-56 so that the flash tool can find the phone. In the model config window of the flash tool select the 'manual mode' then enter the path to the downloaded LGUP_8974.dll in 'DLL' and the path to your TOT file in 'S/W'. Set 'Action mode' to 'BOARD DL' then press 'OK'.
Your phone should be shown on selected COM port. Now you can press Start (the arrow).
OverClockeD_GR said:
do tot methot and it wil work follow this instructions get the tot files and the right dll i copy paste from a guy that had optimus and worked like this on him
"My problem was the infamous 2% bug with the KDZ. I think reason for this is the wrong device ID set in the 'build.prop' by the G3 rom for the G2. The flash tool expects a G2 but sees a G3.
I did not find a workaround for this BUT there is one for the TOT method. You will need:
- LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.1 2.3.exe (version does not matter)
- Setup_LGFlashTool_1.8.1.1023.exe - for flashing of a TOT
- LGUP_8974.dll - this is needed for the flash tool to accept all TOTs
- the right TOT for your device
Please google these, I just checked and found them all. You can also find instructions for them.
Install drivers and LGFlashTool then start it.
Start smartphone in download mode by holding the volume up key while plugging USB in PC. Phone must be off.
Wait for the device recognition then change COM port of the new device in Windows device manager to something between 41-56 so that the flash tool can find the phone. In the model config window of the flash tool select the 'manual mode' then enter the path to the downloaded LGUP_8974.dll in 'DLL' and the path to your TOT file in 'S/W'. Set 'Action mode' to 'BOARD DL' then press 'OK'.
Your phone should be shown on selected COM port. Now you can press Start (the arrow).
Click to expand...
Click to collapse
Ok downloaded all the files except the .tot. I found THIS but they are .exe :/ should i change the file type once downloaded? (I'm downloading v10a)
Thanks for the help guys!
diegz said:
Ok downloaded all the files except the .tot. I found THIS but they are .exe :/ should i change the file type once downloaded? (I'm downloading v10a)
Thanks for the help guys!
Click to expand...
Click to collapse
No, do not rename file; it's .exe BUT when you'll double-click on it, it gonna launch winrar automatically; I was "scared" too, but it works pretty good don't worry. (Sorry I'm late, but I'm french, and there is jetlag between you and me...)
casual_kikoo said:
No, do not rename file; it's .exe BUT when you'll double-click on it, it gonna launch winrar automatically; I was "scared" too, but it works pretty good don't worry. (Sorry I'm late, but I'm french, and there is jetlag between you and me...)
Click to expand...
Click to collapse
Ok guys! The TOT method worked Then I flashed v30a kdz and it works perfectly!
As you said the problem was that flashtool didn't recognise the G2 (probably it saw it as G3) so it keeps stopping at 2%.
Thank you all for the help :highfive:
Ps no jetlag I'm from Italy ;p
diegz said:
Ok guys! The TOT method worked Then I flashed v30a kdz and it works perfectly!
As you said the problem was that flashtool didn't recognise the G2 (probably it saw it as G3) so it keeps stopping at 2%.
Thank you all for the help :highfive:
Ps no jetlag I'm from Italy ;p
Click to expand...
Click to collapse
My mistake ! Happy for you!
@diegz, what variant of LG G2 do you have? International? I'm planning to flash the 30A 32gb Italy variant on my G2 international. Just want a quick reference before I flash. Sorry for the OT.
@happiness4u i'm on 16gb D802! It's a great update if you ask me
diegz said:
@happiness4u i'm on 16gb D802! It's a great update if you ask me
Click to expand...
Click to collapse
Thanks for the heads up. Gonna try this out in a moment. +1 added.
I have a new and unique problem with my set Ls980 (LG G2). I dig down all xda and other forums from last week. But no use till now. So i need some good help from experts . Ok here is the situation . I have Lg g2 ls980 (sprint) i rooted it to flash some LP custom rom in it. i installed RECURRECTION REMIX LOLLIPOP ROM in it successfully along with it's gapps. After reboot i got my phone in boot loop. now the current situation is that
1- I have nothing on my phone everything wiped out. no rom backup or anything else on my phone memory.
2- I have stock recovery (pictures attached).
3- I have broken download mode. ( so i can't attach my phone to lg flash tool) picture attached.
4- I am stuck on boot loop with cm11 M5 ( last rom installed using adb sideload option from stock rom)
5- No fastboot mode.
Please guide me to recover my soft bricked phone.
Did you try Tot method? What happens when you plug your phone to pc? Does adb recognize your device?
ceza1380 said:
Did you try Tot method? What happens when you plug your phone to pc? Does adb recognize your device?
Click to expand...
Click to collapse
How can i try tot method without going to download mode ? as i said phone only have stock recovery , Yes there is an option in stock recovery "Apply update from ADB" by selecting that i can run adb sideload commands. And i can flash any zip rom from that option . I tried several rom's using this option but installation aborted in middle .
Does device manager in Windows recognize your device? In Tot method you do port settings to flash kdz. Also you can give it a try for LG pc suite.