Hello, today I got my Amazon Kindle Fire! After starting an connecting to my Wifi network, I made an update, wich was available! But after installing the update I can´t find any Wifi-network! Also tried the factory reset, but didn´t work!
Can anybody help me? Is it possible to downgrade or something else??
Thx Chris
masterc1111 said:
Hello, today I got my Amazon Kindle Fire! After starting an connecting to my Wifi network, I made an update, wich was available! But after installing the update I can´t find any Wifi-network! Also tried the factory reset, but didn´t work!
Can anybody help me? Is it possible to downgrade or something else??
Thx Chris
Click to expand...
Click to collapse
Try contacting tech support they might have something for you to flash. And if they do, you should post the files and process here. Unfortunately without solid kernel, or recovery information there's little we can do.
Sent from my SPH-D710 using xda premium
Hopefully, cause I don´t want send it back
After chatting with Amazon, the problem wasn´t solved! But I looked a bit more on the Amazon Homepage and found where I can download the Software Update to 6.1:
Download Link
And here is the instruction:
http://www.amazon.com/gp/help/customer/display.html/ref=hp_k6_updatesi?nodeId=200790620
I will try it now and report what happends!
I think you already have that don't you?
When I got my KF, it immediately before I did anything updated to that version.
Code:
Current Version 6.1_user_2017120
Yes I have the one but I´ll try to run the update again manuelly, or do you think t wont work?
Masterc, didn't you say in another thread that you are in Austria?
You should mention that here if it is the case as it might affect the responses you get.
Yes thats true, but Wifi worked before I downloaded and installed the update! It also showed my name... the Amazon support told me it should work abroad..
I tried to install the update again, but it didn´t solve the problem.
So after playing around a while, the network pops up (yeahh) but when I enter the (right) passwort it always shows:
Error in conncection
unable to connect to selected access point. Please check the password you have provided
the kindle found my hotspot from my galaxy note (without password) and it connected just one time for arround 10 seconds..
Now I can´t connect again... quite intressting
Hopefully it is not the hardware - but I don´t think so otherwise I couldn´t download the update.
Related
I can't seem to get my update to go for anything. Not rooted, no custom recovery etc.
Went to check for the update, picked UK, made a Samsung account etc. It tries to connect then I just get "Connection Failed" after it told me an update is required.
Is anyone else having this issue?
Thanks,
JD
connection has been up and down tonight
pentafive said:
I can't seem to get my update to go for anything. Not rooted, no custom recovery etc.
Went to check for the update, picked UK, made a Samsung account etc. It tries to connect then I just get "Connection Failed" after it told me an update is required.
Is anyone else having this issue?
Thanks,
JD
Click to expand...
Click to collapse
Same issue here.. I keep trying but so far it goes to 6% and then fails.
jollerbarn said:
Same issue here.. I keep trying but so far it goes to 6% and then fails.
Click to expand...
Click to collapse
same here. sometimes you get the feeling that its your tab doing this but I guess its total server failure.
http://forum.xda-developers.com/showthread.php?t=1118132
it seems that the servers are working now. I successfully updated my galaxy tab 10.1 to android 3.1:
http://twitpic.com/59i50t
Yep, it is working now. Woke up this morning and it had downloaded it. Just got it applied.
Time to get CW and root back..
Thanks,
JD
so we DO have to re-do the root process once we apply the update via OTA ? Dammit.
pentafive said:
I can't seem to get my update to go for anything. Not rooted, no custom recovery etc.
Went to check for the update, picked UK, made a Samsung account etc. It tries to connect then I just get "Connection Failed" after it told me an update is required.
Is anyone else having this issue?
Thanks,
JD
Click to expand...
Click to collapse
Please do not Post Questions or Problems in the Development Forum Thanks
Moving to General
The updates are rolling out now for UK and WE tablets..
http://download.lenovo.com/slates/think/tablet1/
Where is the zip file?
I can't see the right one....
Edit: OMFG....i was too excited to see it.
Sry
How to update ?
http://forums.lenovo.com/t5/ThinkPa...y-install-updates-and-fix-stucked/td-p/579867
The us release is expected for 8 June 2012
I've lost my 3G connection after updating. It still shows signal strength etc but has no internet connection. I'm using an O2 Germany SIM card
There are some other people with the same problem at android-hilfe.de, so be careful if you need 3G, there might be some more SIM cards that stop working
Does anybody have a stock nandroid backup of A310_02/0039_0089_WE?
I cannot install the update because the checksum is wrong on a lot of files (20% of them to be precise).
Alternatively, I think a nandroid backup of a working OTA 4.0.3 would also work.
Hi!
I've got the same problem after deleting chinese FelxT9. No OTA possible and so I'm searching also for an nandroid backup WE for 3.1 or 4.0.3
Frank
Liftboy said:
Hi!
I've got the same problem after deleting chinese FelxT9. No OTA possible and so I'm searching also for an nandroid backup WE for 3.1 or 4.0.3
Frank
Click to expand...
Click to collapse
Here you have FlexT9chinese from my 0089_WE
I already made the update but CWM is gone and I cannot reinstall it.
You can also modify the update-script and remove the check for the missing files.
Mine keeps getting this error.
Android assert failed apply_patch_check ("/system/xbin/busybox)
I did factory reset but still the same error
The second problem now it cant connect to the router after the factory reset it keep saying obtaining ip number
Any idea what to do
Please help
ThinkPadTablet_A310_02_0039_0089_WE
moom999 said:
Mine keeps getting this error.
Android assert failed apply_patch_check ("/system/xbin/busybox)
I did factory reset but still the same error
The second problem now it cant connect to the router after the factory reset it keep saying obtaining ip number
Any idea what to do
Please help
ThinkPadTablet_A310_02_0039_0089_WE
Click to expand...
Click to collapse
If you have root and CWM-recovery installed you can remove the check for busybox and install the update via recovery-menu
moom999 said:
Mine keeps getting this error.
Android assert failed apply_patch_check ("/system/xbin/busybox)
I did factory reset but still the same error
The second problem now it cant connect to the router after the factory reset it keep saying obtaining ip number
Any idea what to do
Please help
ThinkPadTablet_A310_02_0039_0089_WE
Click to expand...
Click to collapse
Exactly the same as me and I've tried everything I can think of and come to the conclusion that 1. ICS isn't happening 2. The tablet is now broken.
Exe557 said:
If you have root and CWM-recovery installed you can remove the check for busybox and install the update via recovery-menu
Click to expand...
Click to collapse
It is not rooted and I could not root it now
OT: And the battery performance in 4.0.3 is still terrible.
The same problem to me!
To wifi connecting: you will be connected but you must change IP Settings to Static (not DHCP) and then manual entering IP etc.
dencho8 said:
The same problem to me!
To wifi connecting: you will be connected but you must change IP Settings to Static (not DHCP) and then manual entering IP etc.
Click to expand...
Click to collapse
Thanks it works for now
But it keep disconnecting and connecting from time to time
Any way it somehow works
But still can’t update it to ics
what about ROW?
Is there any info when this OTA update will be available also for rest of the world?
Can we say that this upgrade provided by Lenovo to ICS is not working well, regardless if the TPT's are root or not?
As anyone with non-rooted TPT made the official upgrade without problems?
Thanks
The real problem is Lenovo lacking willingness to supply us with a real factory image, so the tablet can be reflashed to absolute stock and reupdated.
It's like... your laptop breaking down because of software failure and then you can't even do a restore because you don't have the software. Only the patches provided by windows update.
Terrible move from Lenovo's side and I would consider taking it up with our consumer rights movement.
cristimv said:
Is there any info when this OTA update will be available also for rest of the world?
Click to expand...
Click to collapse
US approximately 6/8. ROW "later" per sticky below.
http://forums.lenovo.com/t5/ThinkPad-slate-tablets/Re-OTA3-update-ICS-4-03/m-p/755003#M14456
Root MethodAmazon has just released a new firmware update, blocking the fastboot commands necessary for root/custom ROMs (fastboot boot). We need more information about this update. If people could update their tablet to this latest version without getting it stuck in the botloop, we could see the information regarding the update and get root out for this ROM ASAP. Thanks to anyone who sacrifices root/ROMs for development.
List of things you can't do:
Downgrade to an earlier release
Boot a .img from Fastboot
List of things you can do:
Install and use the Google Play Framework and Services
Root
Install Custom ROMS via FlashFire
Remove Lockscreen Ads
Remove Amazon Bloatware
Feel free to comments things that worked/didn't work on your device.
ANYONE WHO IS ON 5.0.x AND WANTS TO GO TO 5.1.1 WITHOUT ANY COMPLICATIONS AND KEEPING TWRP, GO TO THIS LINK: http://forum.xda-developers.com/showthread.php?t=3265594
Can anyone test if the Google Framework Install tutorial works on this update?
It does.
However, DON'T TRY TO DOWNGRADE BACK TO THE 5.0.1 FIRMWARE. IT WILL BRICK YOUR DEVICE. I found that out the hard way. It's stuck in a preloader reboot-loop.
Added list of what you are able to do on the update.
Can someone with a brand new Fire & an open wifi network within range, confirm that it will not automatically connect to wifi? I would appreciate it greatly.
Yes, I do believe that you should have to agree to connect to wifi. And that's what I vaguely recall from my Fire. But I'd like to be 100% sure. Don't want to take the slightest chance. My friend has a new fire in the box & has an open wifi network within range of their place.
blueberry.sky said:
Can someone with a brand new Fire & an open wifi network within range, confirm that it will not automatically connect to wifi? I would appreciate it greatly.
Yes, I do believe that you should have to agree to connect to wifi. And that's what I vaguely recall from my Fire. But I'd like to be 100% sure. Don't want to take the slightest chance. My friend has a new fire in the box & has an open wifi network within range of their place.
Click to expand...
Click to collapse
You have to go through the setup, but originally I just skipped that part, even though I was next to a Starbucks, and it didn't connect.
Doesn't Starbucks wifi require you to click to agree to their terms of use before you can freely browse or download? So Internet would not actually be available initially to the update script.
Pretty much, I trust amazon on this issue, as far as I can throw them. I don't want to presume that a OTA proccess won't silently connect, while the Fire otherwise appears to be waiting for the ok to connect to wifi.
Bloat removal
Hi just to add this thread it looks like you cannot remove any of the bloat as I was able to do on 5.01
craigs23 said:
Hi just to add this thread it looks like you cannot remove any of the bloat as I was able to do on 5.01
Click to expand...
Click to collapse
Thanks, added.
This is bullsh!t. the ENTIRE reason about 5,000 people bought this tab last week is because of root, fastboot and CM. If I get my tab soon I can offer any assistance you need. I'm not sure if it will be possible to dump any part of the system, boot, etc. without fastboot or twrp, but I'm sure we could figure something out.
blueberry.sky said:
Can someone with a brand new Fire & an open wifi network within range, confirm that it will not automatically connect to wifi? I would appreciate it greatly.
Yes, I do believe that you should have to agree to connect to wifi. And that's what I vaguely recall from my Fire. But I'd like to be 100% sure. Don't want to take the slightest chance. My friend has a new fire in the box & has an open wifi network within range of their place.
Click to expand...
Click to collapse
When I setup mine it asked to turn on wifi I skipped it and said later.
Sent from my SM-N910T3 using Tapatalk
Has anyone tried kingroot on 5.1.1?
Experts please take a look at this
What was changed in OS 5.1.1?
If anyone can get the frimware update or capture it id like to test it out
running 5.1.1 & all I could manage to load was Google Account manager. The rest (Framework Services, etc) says something like "App not installed" & nothing else, every time I try.
scratch that..... found found a couple that did load for me.
Damn! I did this (tried to downgrade, got bricked) a day before you posted this. I should probably replace mine...
My unrooted Fire upgraded to 5.1.1 last night before I had any idea it was coming. I'm willing to try whatever is needed to assist with further research if I could be of any help.
unlikely it would work, but did anyone on 5.1.1 try
Code:
fastboot -i 0x1949 boot twrpfilename
Sent from my KFFOWI using Tapatalk
5.1.1 update file
Here is the 5.1.1 update file
snap42.com/update-kindle-full_ford-37.5.4.1_user_541112720.bin.zip
Hello
I have a Yotaphone 2 running android 5.0. I have a huge problem with the device which is, that the phone reboots automatically all by itself after the screen turns off. The screen timeout is set at 1 minute and once the screen goes off, the phone reboots! I don't know what the problem is but its making me crazy!
Note: The phone does not reboot if the screen doesn't turn off. So I changed the screen timeout to 30minutes. Also note that Wi-Fi doesn't start immediately. It doesn't even start most of the time and is stuck at "turning on"! And also, the phone isn't detecting my SIM Card!
Hope someone can solve my problem.
Wow, seems a lot of problems here. However you provided very few info about your phone.
1) Where did you buy it?
2) What have you done after you opened it, OTA? Which firmware was installed?
3) Have you tried factory reset by wiping data in the stock recovery? (Accessible with Vol+ and Power)
4) Have you tried to flash from scratch the RU .124 firmware with YotaFlasher?
5) The phone was behaving normally before or it's doing this as soon as you started using it?
I got the phone as a gift
TheArt. said:
Wow, seems a lot of problems here. However you provided very few info about your phone.
1) Where did you buy it?
2) What have you done after you opened it, OTA? Which firmware was installed?
3) Have you tried factory reset by wiping data in the stock recovery? (Accessible with Vol+ and Power)
4) Have you tried to flash from scratch the RU .124 firmware with YotaFlasher?
5) The phone was behaving normally before or it's doing this as soon as you started using it?
Click to expand...
Click to collapse
-The phone was a gift from "Aramex Company".
-Yes, I have factory reset it! Note: It wasn't possible to reset it from settings because it would always get stuck in "Shutting Down" phase and nothing would happen. So I hard reset it.
-I found something strange going on though. Whenever I reset it, It would restart (after the reset is over) and say that "ANDROID IS UPGRADED TO 5.0".
I think it is upgrading by itself to 5.0.
-No, I haven't tried any flashing.
-Yes, the phone was working fine for a while and then started behaving like this!
Cheers!
(Thank You for your support and attention by the way)
Video
Hello!
I have made a video showing what the problems are! Please give me your e-mail so that I can send you the "Dropbox" link to the video.
Thank You!
I think the first thing to do here is to flash a clean firmware (RU or EU) on your phone via YotaFlasher, search here on xda how, and then report back if it's happen again! Seems that the firmware it was shipped with wansn't so stable.
Flashed it!
TheArt. said:
I think the first thing to do here is to flash a clean firmware (RU or EU) on your phone via YotaFlasher, search here on xda how, and then report back if it's happen again! Seems that the firmware it was shipped with wansn't so stable.
Click to expand...
Click to collapse
Hey!
As you had prescribed, I flashed it! First I flashed it with Android 5.0.0-ME1.1.60 and after opening the phone I used it for a while and the phone was same as before flashing! There was no difference at all! The phone was restarting on turning screen off as usual, the WiFi wasn't turning on, and the SIM wasn't being recognized!
But then I flashed it with Android 4.4.3-S01-003-ME1.0.3.61a and the phone is still rebooting by itself upon switching the screen off and the WiFi problem still persists! The WiFi just simply won't turn on. It's stuck at "turning on"! The SIM isn't recognized either! Also, the phone is restarting from the inside now (It wasn't restarting before. I had to keep the power button pressed every time I wanted to restart)! But NOTE that the phone still cannot be just shut down, it can only be restarted!
I don't know what to do!
Cheers
can you please help me find 4.4.3-S01-003-ME1.0.3.61a firmware. i tried yotaflasher and i cant make the program work. it exits close itself. i couldnt find any firmware folder in yotadevices ftp too. can you help me found the spesific firmware please?
Why are you unable to make yotaflasher work
lgk350tr said:
can you please help me find 4.4.3-S01-003-ME1.0.3.61a firmware. i tried yotaflasher and i cant make the program work. it exits close itself. i couldnt find any firmware folder in yotadevices ftp too. can you help me found the spesific firmware please?
Click to expand...
Click to collapse
Hi lgk350tr,
Why are you unable to make yotaflasher work, it is a pretty simple application. Have you tried to see instruction videos on YouTube on how to use it? Instructions are also available on XDA Developers' website. ( https://forum.xda-developers.com/yotaphone-one/general/yota-flasher-download-t3480922 )
Don't hesitate to contact, for any problem!
Cheerio
Please help..................I spent 800 USD on this phone and I can't use it
Can someone freaking help me with my phone's problem, I have spent 800 US Dollars buying that phone, and I can't even use it! It has been 6 months since I opened this thread and no one has helped me yet!
PLEASE HELP..............................................................:crying::crying::crying:
akahomeacc said:
Can someone freaking help me with my phone's problem, I have spent 800 US Dollars buying that phone, and I can't even use it! It has been 6 months since I opened this thread and no one has helped me yet!
PLEASE HELP..............................................................:crying::crying::crying:
Click to expand...
Click to collapse
Try flashing the hybrid modem mentioned in the general guide (Part 2).
Try flashing 2 times before rebooting.
If nothing helps, you could try lineageos, @angelll123 made a lengthy guide how to that in the post quoted here , also check my comment.
Is this what you mean?
tomgaga said:
Try flashing the hybrid modem mentioned in the general guide (Part 2).
Try flashing 2 times before rebooting.
If nothing helps, you could try lineageos, @angelll123 made a lengthy guide how to that in the post quoted here , also check my comment.
Click to expand...
Click to collapse
I have attached a screenshot of the Yotaphone 2 General guide page, I want to know if you are referring to the text that I highlighted in the screenshot!
Thank You
I do experience similar issue, but only recently. I haven't done anything like flashing or upgrading my phone, it started by itself .
I am experiencing reboots whenever battery drops below about two thirds of its capacity. Also, charging and handling some load prevents this.
Note that my Yotaphone has both displays damaged. Still working though.
Hello everyone!
I have a big issue with this tablet: after the new update to 7.0 I notice the system is consuming a lot of internal space and the system is not stable like it should be.
What I would like to do is to revert to the previous firmware/version or try to install any other bootloader wich now is beeing very difficult because I dont know how to do and the steps that I read to do it are very complicated.
Does anyone can help me to install the firmware on this tablet?
I have everything, the tools, the firmwares, cables, the pc... everything.
Then other thing is when I try to go to bootloader, I mean, is in chinese!!! Is not even simple and looks I cant solv my problem at all.
Please, anyone can give me a hand?
Thanks in advance for all your help and sorry about my bad english.
I will give a party with those who can help me and I will offer beers to everyone!
Thanks!
Where did you get the firmware ?
I have exactly the same problems. I managed to get the Z300M software from the ASUS website but not the P00C. Would like to roll back to software from May or before.
same EXACT problem... looks like audio_dump .wav files are the culprit but cannot delete them. used fastboot to factory reset after 7.0 update and problem came back 3 days later! can't find any older updates for the p00c online either
Somebody posted a possible solution in another thread. Can you see if it works for you?
diplomatic said:
Hey guys, see if this works:
Install Engineer Mode MTK shortcut
Turn on developer options
Start Engineer Mode. Go to Hardware Testing -> Audio -> Audio Logger
Uncheck any boxes that are checked
Profit (and maybe reboot)
All in all, I don't understand why some tablets have the logging enabled and other don't, if this is indeed the issue. I've never seen it enabled, even after a factory reset.
If you have the audio logging issue on either the Z380M or the Z300M, please post:
Your firmware SKU
Your region code given by the property ro.config.versatility (may need a terminal app to read that via getprop)
The firmware version you were on when you reset your tablet
Click to expand...
Click to collapse