Well, today I tried setting up ClockworksMod so I could easily backup and restore my phone as needed. (As previous work i had caused issues and it wouldnt reboot until i reinstalled the rom)
Well, clockworkmod recovery would not install through the app, so I installed the image through Odin, and that worked flawlessly. I was able to backup and restore.
After it booted back up I was unable to add a new google account or erase the old one. Factory resetting it would casue it to get stuck in the boot loop again, until i restored it or reflashed.
Eventually I tried flashing another image, with repartition turned on.
Well, without surprise Windows 7 semi crashed and killed Odin.
Now when my phone "turns on" all i see is black. Nothing happens. I cant do any of the 3 button combos to get into Recovery or Download mode
Can anybody help me? I need to get this working ASAP!
Thanks
Edit : I need to check my eyes. I thought you can get into download mode.
If you cannot get to download mode with the 3-button-combo then you'll need a jig.
Intratech said:
If you cannot get to download mode with the 3-button-combo then you'll need a jig.
Click to expand...
Click to collapse
Dosnt that only work if the image of the phone and computer show up on the screen?
Absolutly nothing shows up for me
Can I have your battery cover to keep as a spare.
bncplix said:
Dosnt that only work if the image of the phone and computer show up on the screen?
Absolutly nothing shows up for me
Click to expand...
Click to collapse
You need a jig.
Uhm, why did you check repartition?
Also yes, you will need a jig. That's pretty much the only thing that can get you into download mode in this situation.
Transmitted from a Galaxy far far away via XDA telepathy.
Intratech said:
You need a jig.
Click to expand...
Click to collapse
Okay, going to just order one off ebay.
Will this do? hxxp://cgi.ebay.com/Samsung-i9100-Galaxy-S-II-Download-mode-USB-Dongle-Jig-/250824932406?pt=AU_MobilePhoneAccessories&hash=item3a6654bc36
But actually, it says it has to show one of those two screens, when mine is all black?
geko95gek said:
Uhm, why did you check repartition?
Also yes, you will need a jig. That's pretty much the only thing that can get you into download mode in this situation.
Transmitted from a Galaxy far far away via XDA telepathy.
Click to expand...
Click to collapse
Because it said it was needed for that image i was flashing
bncplix said:
Okay, going to just order one off ebay.
Will this do? hxxp://cgi.ebay.com/Samsung-i9100-Galaxy-S-II-Download-mode-USB-Dongle-Jig-/250824932406?pt=AU_MobilePhoneAccessories&hash=item3a6654bc36
But actually, it says it has to show one of those two screens, when mine is all black?
Because it said it was needed for that image i was flashing
Click to expand...
Click to collapse
It can still work in some cases, lets hope it does in yours.
Did you get that advise about repartitioning from Samfirmware?
Intratech said:
It can still work in some cases, lets hope it does in yours.
Hopefully! I just ordered one
Did you get that advise about repartitioning from Samfirmware?
Click to expand...
Click to collapse
Yes I did, was that something I shouldn't have done?
It sat on repartitioning for about 15 minutes, then windoes said Odin stopped responding and it killed it :/
I've been telling everybody to stop using the .pit files and repartitioning the device for every flash as you're just increasing the possibilities of things going wrong but people don't seem to take notice. Sadly in your case something did go wrong. You only need to use the .pit files and repartition the device if you mess up your partition table.
Those guys at Samfirmware really need to stop telling people to repartition their device for every flash.
Intratech said:
I've been telling everybody to stop using the .pit files and repartitioning the device for every flash as you're just increasing the possibilities of things going wrong but people don't seem to take notice. Sadly in your case something did go wrong. You only need to use the .pit files and repartition the device if you mess up your partition table.
Click to expand...
Click to collapse
Well, lesson learned. Today was the first time I even tried installing another ROM
Thanks for the help
Once my Jig comes in, I'll let you all know how it goes!
check if the phone heatens up extremely as soon as you put the battery in. if yes, thats a really bad sign.
a jig will only help you if you see anything on the screen. if the phone/screen doesn't react to ANYTHING, that's a full brick (happened to me too, jig didn't help, nothing helped, phone was completely dead and i had to send it in. fortunately, they repaired it within warranty).
lazyb2k said:
check if the phone heatens up extremely as soon as you put the battery in. if yes, thats a really bad sign.
a jig will only help you if you see anything on the screen. if the phone/screen doesn't react to ANYTHING, that's a full brick (happened to me too, jig didn't help, nothing helped, phone was completely dead and i had to send it in. fortunately, they repaired it within warranty).
Click to expand...
Click to collapse
See, this is what I was trying to say! I read everywhere that if somethign is on the screen the Jig will work, otherwise it wont. Others are replying to me here saying it should still work for me
I'm not too worried about it. I have 4 of the phones. I work closely with Samsung and they were given to me. It would still be nice if it recovers, so we will see!
i guess in situations where it was reported to work under these conditions the owners didnt fully exploit all different possibilites to get it back on and so they just came up with this false assumption.
nonetheless, it's worth a try. at least, the jig is pretty useful to remove the yellow exklamation mark and to reset the flash counter .
lazyb2k said:
i guess in situations where it was reported to work under these conditions the owners didnt fully exploit all different possibilites to get it back on and so they just came up with this false assumption.
nonetheless, it's worth a try. at least, the jig is pretty useful to remove the yellow exklamation mark and to reset the flash counter .
Click to expand...
Click to collapse
That's another thing I am unsure of, whats the flash counter?
bncplix said:
See, this is what I was trying to say! I read everywhere that if somethign is on the screen the Jig will work, otherwise it wont. Others are replying to me here saying it should still work for me
I'm not too worried about it. I have 4 of the phones. I work closely with Samsung and they were given to me. It would still be nice if it recovers, so we will see!
Click to expand...
Click to collapse
I'm not saying it will work for sure, what I'm saying is depending on the damage done it may still get you into download mode so you can flash the firmware.
bncplix said:
That's another thing I am unsure of, whats the flash counter?
Click to expand...
Click to collapse
to be precise, it's the "custom binary counter" which counts up as soon as you flash something modified manually on your phone. has nothing to do with your problem, though.
We need to find the way to boot the device externally, i.e. bootloader on ext. SDCard or the likes....
Related
I tried to unroot my phone via OCLF from the market. It went dark, then got the normal Vibrant screen, the the Galaxy S screen, then it went dark again. Now, it just sits. Black screen. All the buttons at the bottom are lit up. :-/
Anyone?
Silly question, I know. But did you have a nandroid backup, by any chance?
This is probably a last resort, but try boot into recovery and wipe everything. This fix the problem for me, the downside is you lose all you data.
Sent from my SGH-T959 using XDA App
If you are anything like me, recovery didn't work and using Odin and reflashing Stock with repartition didn't work either.
You'll need to use odin to flash Eugenes "Vibrant that doesn't brick" (NO REPARTITION), then use odin again to flash Stock (check repartition this time) and you'll be good to go.
You can try to flash the froyo rom with odin...... I had that same exact problem and this is what fixed it for me. Once froyo us flashed then you can flash whatever rom you want. Hth
Ok, I probably should have stated that I'm a complete newby and have no idea what I'm doing. I believe I do have nandroid, but other than that you all are speaking French to me.
Right now I'm in the recover mode (I think). It's hooked up to my computer and I'm in the "Downloading... Do not turn off target!!" mode. This is where I'm stuck...I have no idea where to go from here.
Please talk to me like I'm a 5 year old, because as far as this is concerned, I am!
Oh, and thank you so much for any help you can give me!
hospo said:
Ok, I probably should have stated that I'm a complete newby and have no idea what I'm doing. I believe I do have nandroid, but other than that you all are speaking French to me.
Right now I'm in the recover mode (I think). It's hooked up to my computer and I'm in the "Downloading... Do not turn off target!!" mode. This is where I'm stuck...I have no idea where to go from here.
Please talk to me like I'm a 5 year old, because as far as this is concerned, I am!
Oh, and thank you so much for any help you can give me!
Click to expand...
Click to collapse
Well, good news is... you didn't brick your phone, this is recoverable. Best idea would be to search the forums on how to ODIN back to Stock. Theres plenty of posts on how to do it. You should also be able to find this in the tips & tricks threads. Good Luck.
Thank you all for your help! I recovered it!! Seems as though I was just going about it the wrong way!! I got into the actual recovery mode and cleared it all out. Now it's as good as new!
Again, appreciate your help and patience with what I'm sure is the 120,000th post on this subject. ;-)
Kienz said:
Silly question, I know. But did you have a nandroid backup, by any chance?
Click to expand...
Click to collapse
Is it even possible to make a nandroid backup before rooting?
hospo said:
Thank you all for your help! I recovered it!! Seems as though I was just going about it the wrong way!! I got into the actual recovery mode and cleared it all out. Now it's as good as new!
Again, appreciate your help and patience with what I'm sure is the 120,000th post on this subject. ;-)
Click to expand...
Click to collapse
Hey - what does you doing? Please told me, I've the same problem:
If I start the phone with an USB cable and the battery symbol with the running point under this, the PC recognize that something is connected, but Windows found no driver....
How could you could flash the Stackfirmware back, if the recovery and download menu does not work ?
PLS help !!!
Check out this thread http://forum.xda-developers.com/newreply.php?do=newreply&p=8129898
Go to the section where it says "Did You Flash Something Before Disabling Voodoo? 2 Fixes to Help You Out."
And do fix #1 it is pretty easy and it wont take you more than 20 minutes.
Let us know if that works
And do fix #1 it is pretty easy and it wont take you more than 20 minutes.
Let us know if that works
Click to expand...
Click to collapse
If I following the link and the next one, I can read:
Caution!!! You Must be on STOCK Vibrant Rom & NEVER Have Already Flashed the JP3 Froyo Image
Click to expand...
Click to collapse
It isn't -> it's a Firmware for the normal Galaxy (3key)[I'm a idiot]
First,
You must already Have Odin installed & Know how to boot into Down-loader Mode!!
Click to expand...
Click to collapse
Thats also the problem as described in front : I have had no chance to received the DL Mode.. maybe I make something wrong? The phone is booting up till the "S" is there, after that, the screen is black, keys are lightning...
The recovery 3button are blocked from the beginning; the DL Menu - I did not have reached it successfully
The PC recognize, that is something on USB, but not what ... so Odin did not see the Mobile, too.
So i was flashing the firmware to use the phone on the tab and while doing it the install failed. the tab cut off and will not come back on at all. no download mode nothing...anything can help. wont connect to odin either. any suggestions
Not come back on at all ?
Contact your service center then
Oh one thing...
When something like this happened, people call it "Bricked" not "Fu***d".
GOF007 said:
Not come back on at all ?
Contact your service center then
Oh one thing...
When something like this happened, people call it "Bricked" not "Fu***d".
Click to expand...
Click to collapse
lol i am fully aware of that just expressing how i feel about the brick and saying that it will not do anything..no download mode nothing.
thenewak said:
So i was flashing the firmware to use the phone on the tab and while doing it the install failed. the tab cut off and will not come back on at all. no download mode nothing...anything can help. wont connect to odin either. any suggestions
Click to expand...
Click to collapse
Do you get any lights whatsoever when it's plugged in?
Also, have you tried leaving it on charge for a while in the mains? Generally, when ODIN fails, the phone/tab allows you to get back into download mode, so this is new to me.
Was it flashing the radio (modem.bin) at the time, out of interest?
nprussell said:
Do you get any lights whatsoever when it's plugged in?
Also, have you tried leaving it on charge for a while in the mains? Generally, when ODIN fails, the phone/tab allows you to get back into download mode, so this is new to me.
Was it flashing the radio (modem.bin) at the time, out of interest?
Click to expand...
Click to collapse
No modem only the .tar and .pit files. i had flashed my galaxy s plenty of times with no problems. i left it charging tonight while im at work to see if that will do anything but i get no lights or anything. ive seen that some ppl get the pc to device screen but i dont get that either. but just wanted to try some things before shipping it to samsung only bc im in iraq and shipping takes forever.
Do U get anything when plugging the tab via USB to your computer ? And I do not mean Odin, I am just saying if the computer sees the USB connection.
Also, have you tried to press the POWER button and tap the screen at the same time ?
P_
pakalrtb said:
Do U get anything when plugging the tab via USB to your computer ? And I do not mean Odin, I am just saying if the computer sees the USB connection.
Also, have you tried to press the POWER button and tap the screen at the same time ?
P_
Click to expand...
Click to collapse
Nope the computer doesn't recognize it either. i get nothing at all..no i haven't tried that ...what exactly will that do?
If I bricked my Tab, I too would describe it as F***ED! But even with my moderate modding experience, Im not ready to do the phone mod. Just seems to me like too much risk.
Good luck with your Tab!
How is this a development issue? This isn't your personal support forum.
miketaylor00 said:
How is this a development issue? This isn't your personal support forum.
Click to expand...
Click to collapse
well i figured this would be an appropriate place to ask this type of ? as other ppl do. due to the fact that i was installing firmware from this section of the forums i figured i would ask the developers that read and write here.
anyways...i called samsung and told them idk why it wont cut on and they said to call it a power issue. so im going to send it to them to see if they can tell what i did..hopefully not. but we will see.
thenewak said:
well i figured this would be an appropriate place to ask this type of ? as other ppl do. due to the fact that i was installing firmware from this section of the forums i figured i would ask the developers that read and write here.
anyways...i called samsung and told them idk why it wont cut on and they said to call it a power issue. so im going to send it to them to see if they can tell what i did..hopefully not. but we will see.
Click to expand...
Click to collapse
Try leaving it connected to your computer for up to 1 hour with Odin loaded and ready on the screen.
Someone it will take time before it allow your PC to talk to it when it a messed up state due to a bad flash!
rmanaudio said:
Try leaving it connected to your computer for up to 1 hour with Odin loaded and ready on the screen.
Someone it will take time before it allow your PC to talk to it when it a messed up state due to a bad flash!
Click to expand...
Click to collapse
even if it will not power on at all?
thenewak said:
So i was flashing the firmware to use the phone on the tab and while doing it the install failed. the tab cut off and will not come back on at all. no download mode nothing...anything can help. wont connect to odin either. any suggestions
Click to expand...
Click to collapse
What were the names of the tar and pit files you flashed?
rotohammer said:
What were the names of the tar and pit files you flashed?
Click to expand...
Click to collapse
i dont see the thread on here but it was on here about a week ago. the first one that got you 3g + phone. Im not on my laptop bc im at work but do you know what im takling about.
Edit: i think it was the old JME and 512.pit...
OK just as an update and for anyone who had the same prob...as in tab will not do anything...i called samsung used the 1 yr warranty and told them it was a power issue...that i went to work it was on came home it was off and wouldnt power up so they replaced it with another one.
First off - i've searched all day & stayed in IRC for over 40 mins without a hit so i'm looking for a little help.
I was upgrading to Froyo from a "stock" Continuum today using Odin. Everything seemed smooth - got a pass message & unplugged the usb cable. Now nothing (won't power up, etc) & i can't get into download mode.
I've tried all of the button/cable/battery combos that i could find. I have tried to flash a recovery using Odin & it gets stuck with the message "setup connection" in the message box.
I know my pc is seeing the phone (though you can't access the SD card or memory) & Odin is seeing it (yellow box) but i can't seem to get past this point or go back to the original.
Any help is appreciated.
mountainmanscg said:
First off - i've searched all day & stayed in IRC for over 40 mins without a hit so i'm looking for a little help.
I was upgrading to Froyo from a "stock" Continuum today using Odin. Everything seemed smooth - got a pass message & unplugged the usb cable. Now nothing (won't power up, etc) & i can't get into download mode.
I've tried all of the button/cable/battery combos that i could find. I have tried to flash a recovery using Odin & it gets stuck with the message "setup connection" in the message box.
I know my pc is seeing the phone (though you can't access the SD card or memory) & Odin is seeing it (yellow box) but i can't seem to get past this point or go back to the original.
Any help is appreciated.
Click to expand...
Click to collapse
Try pulling your battery and holding down the power button for a slow count of 20 to see if download mode comes back. After that, you should be good to flash stock ec07 and then recovery kernel. After that, whichever rom you choose. If that doesn't work, I'll try to get into IRC at some point tomorrow (today).
That didn't work either - screen is still blank & it won't progress in Odin. I'll jump back into IRC if anyone has any other ideas - thanks.
i dont know what to tell you continuums are very hard to brick and if u cant get into download mode then theres not that much u can do im afraid I was talking to adam outler about trying the unbrickable mod on a continuum but he does not have one to test. now he got the fascinate to work so id pm him and see if he'll let you send your phone to him
Hey TXwolf - i had to run out for a while - saw where you got on IRC earlier. Verizon is sending me a new phone, so i guess i'll just give up on saving this one...
mountainmanscg said:
Hey TXwolf - i had to run out for a while - saw where you got on IRC earlier. Verizon is sending me a new phone, so i guess i'll just give up on saving this one...
Click to expand...
Click to collapse
I'll be in irc in a few if ya wanna give it another shot
I too manged to brick my phone to point to where I can not even get to the download screen. I have the same problem as OP, Odin will not move past SetupConnection when trying to recover following this post.
androidforums.com/continuum-all-things-root/457453-oh-crap-i-screwed-my-phone-up-recovery-guide.html
Any further help would much appreciated seeing as how I am past my warranty period and do not really want to buy a new phone.
PapaKaster said:
I too manged to brick my phone to point to where I can not even get to the download screen. I have the same problem as OP, Odin will not move past SetupConnection when trying to recover following this post.
androidforums.com/continuum-all-things-root/457453-oh-crap-i-screwed-my-phone-up-recovery-guide.html
Any further help would much appreciated seeing as how I am past my warranty period and do not really want to buy a new phone.
Click to expand...
Click to collapse
If this is frenzifun, from android forums, this is what happened to him
He started a flash of stock ec07 with pit and repartition checked. It flashed params.ifs, boot, SBL and recovery. Then it removed itself (frenzifun, if you could post the flash log for others it might help them) from there, it wont go into dl mode. I was trying to help him in irc, but I'm out of options, other than making a jig. The only thing I can think of, that's causing this is the somehow the button mappings for vol down got erased. I'm not sure how it would, though. Especially since it should be a hardware mapping, independent of any software. And if that is the case, I don't know how to fix it.
If this isn't frenzifun, disregard everything I just said.
Txwolf1980 said:
If this is frenzifun, from android forums, this is what happened to him
He started a flash of stock ec07 with pit and repartition checked. It flashed params.ifs, boot, SBL and recovery. Then it removed itself (frenzifun, if you could post the flash log for others it might help them) from there, it wont go into dl mode. I was trying to help him in irc, but I'm out of options, other than making a jig. The only thing I can think of, that's causing this is the somehow the button mappings for vol down got erased. I'm not sure how it would, though. Especially since it should be a hardware mapping, independent of any software. And if that is the case, I don't know how to fix it.
If this isn't frenzifun, disregard everything I just said.
Click to expand...
Click to collapse
I am not sure who frenzifun is but this still doesn't sound good for my situation. What I can tell you is I was following directions to try an update my phone from 2.1 to 2.2 using Odin. I believed the process was completed, not realizing it was not and unplugged my phone from the computer. From that point on I have not been able to turn the phone on or get the the download screen. Here is the odd thing if I plug the phone into my computer Windows recognizes and Odin can see a COM port but I still can not get past the setup connection when following the directions to try a recover my phone.
PapaKaster said:
I am not sure who frenzifun is but this still doesn't sound good for my situation. What I can tell you is I was following directions to try an update my phone from 2.1 to 2.2 using Odin. I believed the process was completed, not realizing it was not and unplugged my phone from the computer. From that point on I have not been able to turn the phone on or get the the download screen. Here is the odd thing if I plug the phone into my computer Windows recognizes and Odin can see a COM port but I still can not get past the setup connection when following the directions to try a recover my phone.
Click to expand...
Click to collapse
If that is the case, we might be able to do something. Can you meet me in irc at 830 central, tonight?
Txwolf1980 said:
If that is the case, we might be able to do something. Can you meet me in irc at 830 central, tonight?
Click to expand...
Click to collapse
Txwolf I do appreciate the offer and I am in PST and that would 630 my time but I need to take of a few things after and I am not sure I could make that time. One of my places to go is my local Verizon store to see if there anything they can do.
PapaKaster said:
Txwolf I do appreciate the offer and I am in PST and that would 630 my time but I need to take of a few things after and I am not sure I could make that time. One of my places to go is my local Verizon store to see if there anything they can do.
Click to expand...
Click to collapse
Unlessvyou have a hookup, i doubt verizon will help. What I was gonnavtry o garuntees here) is
1. Try flashing in odin with pit, but leavevrepartition unchecked. That most likely won't work, but it's a shot.
2. Use the heimdall version ofvthe guide. I think that may have a better chance. I'll hang out in irc for a while tonight. Just in case.
Txwolf1980 said:
Unlessvyou have a hookup, i doubt verizon will help. What I was gonnavtry o garuntees here) is
1. Try flashing in odin with pit, but leavevrepartition unchecked. That most likely won't work, but it's a shot.
2. Use the heimdall version ofvthe guide. I think that may have a better chance. I'll hang out in irc for a while tonight. Just in case.
Click to expand...
Click to collapse
I just got home but will again be leaving soon. I am sorry if you waited in IRC for me. You are right Verizon did nothing.
PapaKaster said:
I just got home but will again be leaving soon. I am sorry if you waited in IRC for me. You are right Verizon did nothing.
Click to expand...
Click to collapse
Its all good. Try the suggestions I gave you, when you have time. If they don't work, I'll have some down time tomorrow or sunday. Just let me know, and we'll see if we can make the schedules match
I need help!!!
I try everything to root my S4, any different way and i can't root, i fell its something wrong with it, cause phone is 16gb shows only 9gb 6 gb its for miscellaneous files. can someone help?
I like to re install everything.
First the memory shown is correct, the rest is used by android.
Second, what firmware are you on and what specific phone?
jd1639 said:
First the memory shown is correct, the rest is used by android.
Second, what firmware are you on and what specific phone?
Click to expand...
Click to collapse
Baseband version I337UCUAMF3
moiconlau said:
Baseband version I337UCUAMF3
Click to expand...
Click to collapse
MF3 = motochopper does not work. You would need to root using this method:
http://forum.xda-developers.com/showthread.php?t=2387577
NOTE: You cannot unroot once you do it. If you mess up your phone with root, there is likely no way to fix it. There is no possibility of installing a custom recovery, even after you have root...and so you can't flash any ROMs either. Know the risks and issues before you proceed and make sure root is THAT important to you.
Since you are on MF3 there is also no way to downgrade to previous firmware, you are stuck with the above restrictions until someone figures out a new exploit...and no ETA on that.
moiconlau said:
Baseband version I337UCUAMF3
Click to expand...
Click to collapse
Read the first two posts in this because there is good information. In the second post there is a link to how to root mf3. Follow the OP's directions there. If you're still having problems give specific info on where the problems are occurring
http://forum.xda-developers.com/showthread.php?p=42320391
Ps, jeffreii has very good points which you should consider.
i gonna try, and i will let you guys know about. thanks...
jd1639 said:
Read the first two posts in this because there is good information. In the second post there is a link to how to root mf3. Follow the OP's directions there. If you're still having problems give specific info on where the problems are occurring
http://forum.xda-developers.com/showthread.php?p=42320391
Ps, jeffreii has very good points which you should consider.
Click to expand...
Click to collapse
I get stock on download mode. Any solution for it?
moiconlau said:
I get stock on download mode. Any solution for it?
Click to expand...
Click to collapse
So, when you try to boot it just goes to download mode? You mentioned in your first post that you had tried to root, what did you try? Have tried to get into recovery mode?
jd1639 said:
So, when you try to boot it just goes to download mode? You mentioned in your first post that you had tried to root, what did you try? Have tried to get into recovery mode?
Click to expand...
Click to collapse
Yes, used casual and now its go by itself to download mode, and yes i try to go in recovery mode, and come back to download mode
moiconlau said:
Yes, used casual and now its go by itself to download mode, and yes i try to go in recovery mode, and come back to download mode
Click to expand...
Click to collapse
I hate to say it, but because your on mf3 and you tried to use causal, you've borked your phone. Afaik there is not currently away to recover it. You have to wait until if or when an odin flashable firmware comes out. You could try jtag but I don't think that even works. As a last resort try kies emergency recovery.
Hey thanks men, i got it.
Root access, thanks bout of you....:silly::laugh::good::good::good::good::good::good::good::good::good:
moiconlau said:
Hey thanks men, i got it.
Root access, thanks bout of you....:silly::laugh::good::good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
How did you get it to work?
jd1639 said:
I hate to say it, but because your on mf3 and you tried to use causal, you've borked your phone. Afaik there is not currently away to recover it. You have to wait until if or when an odin flashable firmware comes out. You could try jtag but I don't think that even works. As a last resort try kies emergency recovery.
Click to expand...
Click to collapse
i got it men,
Here what do i did:
remove battery wait fill seconds put it back on press volume down home and power its go to download mode, but when its ask if like to download mode or cancel and restart you press cancel and restart and that it.
Thanks for your guys help make my day. :good::good::good::good::good:
moiconlau said:
i got it men,
Here what do i did:
remove battery wait fill seconds put it back on press volume down home and power its go to download mode, but when its ask if like to download mode or cancel and restart you press cancel and restart and that it.
Thanks for your guys help make my day. :good::good::good::good::good:
Click to expand...
Click to collapse
Great to hear!
jd1639 said:
Great to hear!
Click to expand...
Click to collapse
I seriously doubt he got root.
It sounds more like he got it to boot (misspelled words).
No recovery and no way to factory reset. Sad.
Will all these folks be borked forever? On that note, I discovered an automated text survey after talking to AT&T support on the phone to light up a new SIM for a different handset. I gave high marks for the person's help, and low marks on AT&T in general, and in the last survey screen where you supply your comment, I told them what I thought of them locking the bootloader on the Samsung-SGH-I337.
The experience was not unlike wetting myself while wearing a dark suit, it gave me a warm feeling and hardly anyone will notice.
fukenbiker said:
I seriously doubt he got root.
It sounds more like he got it to boot (misspelled words).
No recovery and no way to factory reset. Sad.
Will all these folks be borked forever? On that note, I discovered an automated text survey after talking to AT&T support on the phone to light up a new SIM for a different handset. I gave high marks for the person's help, and low marks on AT&T in general, and in the last survey screen where you supply your comment, I told them what I thought of them locking the bootloader on the Samsung-SGH-I337.
The experience was not unlike wetting myself while wearing a dark suit, it gave me a warm feeling and hardly anyone will notice.
Click to expand...
Click to collapse
yes this is the problem, keep return to download mode after reboot, i root the phone but i cant put a custom room!
If anyone now how to fix please let me know.
moiconlau said:
yes this is the problem, keep return to download mode after reboot, i root the phone but i cant put a custom room!
If anyone now how to fix please let me know.
Click to expand...
Click to collapse
You will not be able to put a custom Rom our recovery on. You have the mf3 firmware. Don't try or you'll mess up your phone worse that it is.
jd1639 said:
You will not be able to put a custom Rom our recovery on. You have the mf3 firmware. Don't try or you'll mess up your phone worse that it is.
Click to expand...
Click to collapse
You cannot flash anything. You cannot obtain a recovery or any kind of factory reset. YOU HAVE THE MF3 FIRMWARE. If you try anything else you will break your handset. Be thankful you can get it to boot up at all.
fukenbiker said:
You cannot flash anything. You cannot obtain a recovery or any kind of factory reset. YOU HAVE THE MF3 FIRMWARE. If you try anything else you will break your handset. Be thankful you can get it to boot up at all.
Click to expand...
Click to collapse
is nothing also than i can do?
moiconlau said:
is nothing also than i can do?
Click to expand...
Click to collapse
Sadly no since u have MF3 only option is root only.
Sent from my SAMSUNG-SGH-I337 using Forum Runner
I tried putting in a rom earlier for my note 3 and it didn't take.
I ended up on that, vibration boot loop.
Odin still worked fine so I tried putting in an original stock rom with root, so I can add recovery.
I could not actually find a fully suitable rom choice, and the samsung website didn't play well with me either. firstly it would not let me register for some reason...anyway.
I am UK on O2 running 9005 SO I put in N9005XXUDMJ7-PRE-ROOTED-KNOX-FREE-ODEX-BL-FREE
I don't know if that was the right choice, I set it up on PDA, and unclicked partition
It's been stuck possibly hanging on ext4 sys for over an hour.
The references I have seen suggest it takes a long time but how long is too long?
I don't want to pull the plug to brick the device completely.
I have a cwm recovery so all I need is to put the recovery back in and I should be good to go...
If this is hanging, what other options do I have?
How long is too long?
Any help fixing this would be greatly appreciated, and a drinks on me...
I am kinda freaking out, have seen similar threads, but because the firmwares are so different they didn't really help..or perhaps I misread things...but nothing really covered not being able to load the recovery software itself
consider me lizard brain in freak out mode right now..
please reply promptly with something.
Can you still boot to cwm or download mode only?
hey_joe said:
Can you still boot to cwm or download mode only?
Click to expand...
Click to collapse
Odin mode only. But it's still hanging.And I am worried that if I pull it now it's going to brick it and not even give me access to ODIN.
8thsiner said:
Odin mode only. But it's still hanging.And I am worried that if I pull it now it's going to brick it and not even give me access to ODIN.
Click to expand...
Click to collapse
Over one hour is too long to flash something even a full stock rom. Something is wrong there.
So you're saying you have no access to an original stock rom of your phone? If there is a problem like this flashing, I would flash the stock rom first then just root and install cwm. The first thing you want to do is have a working phone then just do the other stuff after like rooting, etc..
If what you posted is your stock rom, then download here and flash through odin.
There's also a newer one which is MK2 which you can download here.
Either one is stock.
Downloading the mk 2 now to test
That sorted me out thank you very much.
If you got a pay9all or something let me know, drink on me
8thsiner said:
That sorted me out thank you very much.
If you got a pay9all or something let me know, drink on me
Click to expand...
Click to collapse
No problem. Don't have paypal though and it's not necessary.
Enjoy your phone.
8thsiner said:
That sorted me out thank you very much.
If you got a pay9all or something let me know, drink on me
Click to expand...
Click to collapse
Mate the reason you got into trouble was you weren't flashing a stock rom...
N9005XXUDMJ7-PRE-ROOTED-KNOX-FREE-ODEX-BL-FREE means it has been altered and is considered custom...
A stock rom has not been altered.
8thsiner said:
That sorted me out thank you very much.
If you got a pay9all or something let me know, drink on me
Click to expand...
Click to collapse
There are a lot of good people here that will help you. You don't need to give anything back. And be sure to ALWAYS have a NANDROID backup so that you can restore your phone if anything bad happens.