A few questions about Custom rom's. - Desire HD General

I know this is the wrong section but I got some kind of feeling that there are more people looking in this section.
I have read some guides in the Development section (http://forum.xda-developers.com/showthread.php?t=857537'
But I got some questions about rooting/S-off.
Why is rooting/S-off necessarily, why can't I just put the rom on my SD and go right into recovery mode and boot it up from there?
Also the program visionary plus, I hate that thing so much.... At this step:
Open Visionary and tap temproot, then attempt permroot now. Your device will reboot.
How the hell do I open it? I use Astro File manager or something to go to the file but I can't install the program on my mobile/SD card >.<
Also what do I need to do more besides Wiping my phone? In this guide: http://forum.xda-developers.com/showthread.php?p=11557769
It says to flash a Radio is this a must? Or is the S-off/Root enough.
Thanks already

mesut19 said:
But I got some questions about rooting/S-off.
Why is rooting/S-off necessarily, why can't I just put the rom on my SD and go right into recovery mode and boot it up from there?
Click to expand...
Click to collapse
No, the DHD has a protected system which precludes overwriting the system partition so without S-OFF you can not make any permanent changes.
mesut19 said:
Also the program visionary plus, I hate that thing so much....
Click to expand...
Click to collapse
Don't use it then the instructions here, achieve root without the use of visionary.
mesut19 said:
Also what do I need to do more besides Wiping my phone? In this guide: http://forum.xda-developers.com/showthread.php?p=11557769
It says to flash a Radio is this a must? Or is the S-off/Root enough.
Click to expand...
Click to collapse
No, but using a newer radio may improve battery life and wifi/Gps reception etc.
mesut19 said:
Thanks already
Click to expand...
Click to collapse
No worries!

When I had the wrong Radio my battery drain was 15% an hour and this was with a sense Rom. imo S-OFF is a must.

i used this and it worked great.
http://forum.xda-developers.com/showthread.php?t=961406
i'm using cm7 with android phone 7 theme and i like it.
I heard android revolution is good too but its not running android 2.3, cm7 is.

thddragon85 said:
i used this and it worked great.
http://forum.xda-developers.com/showthread.php?t=961406
i'm using cm7 with android phone 7 theme and i like it.
I heard android revolution is good too but its not running android 2.3, cm7 is.
Click to expand...
Click to collapse
Actually all of the roms now are running Gingerbread, and sense roms are on sense2.1 (With some sense3.0 elements).

My bad, when I was choosing which rom to load yesterday, everything i read said AR was still 2.2. Must have been old threads.

Thanks guys I now know enough
<3

mesut19 said:
but I can't install the program on my mobile/SD card
Click to expand...
Click to collapse
just for the record, nobody can help you based on this information. you need to quote the error message.

Haven't tried CM7 but if you haven't already flashed a rom I'd give a big thumbsup for Leedroids GB rom, very quick, stable and flashed like a dream

Alistair25 said:
Haven't tried CM7 but if you haven't already flashed a rom I'd give a big thumbsup for Leedroids GB rom, very quick, stable and flashed like a dream
Click to expand...
Click to collapse
+1 for this. definitely give LeeDroid a go if you can. admittedly, it's the only custom one i've used to date (and for less than 24 hours at that), but i can't rate it high enough compared to the branded rom i got in the first place. amazing!

kendong2 said:
just for the record, nobody can help you based on this information. you need to quote the error message.
Click to expand...
Click to collapse
There is no error message. I just can't find a 'exe' or AKP file which will install the program on my SD/Mobile.
@ Above,
No, I haven't flashed a ROM yet since I heard there are some problems with ClockWorkmod of ROM Manager so I am going to wait for a few days xD

mesut19 said:
There is no error message. I just can't find a 'exe' or AKP file which will install the program on my SD/Mobile.
@ Above,
No, I haven't flashed a ROM yet since I heard there are some problems with ClockWorkmod of ROM Manager so I am going to wait for a few days xD
Click to expand...
Click to collapse
sorry to hear that. it's news to me, though. i downloaded it (CWM), and used it last night in the process of flashing the rom, no issues. but i understand the whole 'there may be issues, so i think i'll wait - don't want to brick my phone' line of thought. good luck when you get there. i'm sure you'll be fine if you follow the various guides posted on here. they worked an absolute treat for me (and i'm the definition of n00b).

krill78 said:
sorry to hear that. it's news to me, though. i downloaded it (CWM), and used it last night in the process of flashing the rom, no issues. but i understand the whole 'there may be issues, so i think i'll wait - don't want to brick my phone' line of thought. good luck when you get there. i'm sure you'll be fine if you follow the various guides posted on here. they worked an absolute treat for me (and i'm the definition of n00b).
Click to expand...
Click to collapse
RCmix HD is saying about the same that the wiping isn't working or something.
One last question is there a way to backup you're app's?(Free app's XD) And I am using app's like Pingchat and Whatsapp will I lose the contacts in there?

mesut19 said:
RCmix HD is saying about the same that the wiping isn't working or something.
One last question is there a way to backup you're app's?(Free app's XD) And I am using app's like Pingchat and Whatsapp will I lose the contacts in there?
Click to expand...
Click to collapse
Titanium backup for backup & restore apps.
Ps: RCMix roxxxx, and seems to be very close from an update brings full sens 3.0
Sent from my Desire HD using XDA App

jayge_ said:
Titanium backup for backup & restore apps.
Ps: RCMix roxxxx, and seems to be very close from an update brings full sens 3.0
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
So basically I'm screwed? Since I need to downgrade to root, and to backup you need to have root >.< but when you downgrade you lose everything xD
I will try it tonight ._.

If you want to back up the new GB OTA ROM then yes but if you just want to back up your apps then No, you don't need root.
Titanium works with root but doesn't need it. Also, if you ticked to let Google keep a backup then your apps will be re-downloaded when you next perform a wipe.

thddragon85 said:
i used this and it worked great.
http://forum.xda-developers.com/showthread.php?t=961406
i'm using cm7 with android phone 7 theme and i like it.
I heard android revolution is good too but its not running android 2.3, cm7 is.
Click to expand...
Click to collapse
Android Revolution 5.1.x running Android 2.3.3 with stock look...
Sent from my Desire HD

Screw this I can't even manage to downgrade my mobile because the CMD commands don't find my device nor can I normally install the adb drivers.

mesut19 said:
Screw this I can't even manage to downgrade my mobile because the CMD commands don't find my device nor can I normally install the adb drivers.
Click to expand...
Click to collapse
Using Windoze is great....
One word for you: Linux.
At the risk of high jacking this thread, have you installed HTC Sync? Can you connect to HTC Sync? If not, try another USB port (if using front port use back ports or vice-versa). If none work uninstall HTC Sync and reinstall it after rebooting PC.
If that works when you are in adb (making sure USB Debugging is on) try
Code:
adb devices
Do you get a result?

Mr_JMM said:
Using Windoze is great....
One word for you: Linux.
At the risk of high jacking this thread, have you installed HTC Sync? Can you connect to HTC Sync? If not, try another USB port (if using front port use back ports or vice-versa). If none work uninstall HTC Sync and reinstall it after rebooting PC.
If that works when you are in adb (making sure USB Debugging is on) try
Code:
adb devices
Do you get a result?
Click to expand...
Click to collapse
Omg I got a little bit scared seems it worked but now i got: C:/downgrade/adb shell
$
Instead of a #
Is this good or do I need to start again ?XD I am panicing lol I have been trying this for 2-3 hours now.
Edit: It says:
C:\downgrade>adb shell chmod 777 /data/local/tmp/psneuter
Unable to chmod data/local/tmp/psneuter

Related

help a noob

Hi i am new here and to new to android . I want to flash my xperia x10 form the stock software to 2.2 or higher. I have read most of the guides and am still unsure which rom and baseband to use. I am running Ubuntu 10.
thanks
I would suggest Wolfbreak's CM 6.1.3, it's fast and stable, and looks nice =)
It is also easy to install since it needs baseband .54, which you can get it from the .435 stock firmware directly.
mrizz18540 said:
Hi i am new here and to new to android . I want to flash my xperia x10 form the stock software to 2.2 or higher. I have read most of the guides and am still unsure which rom and baseband to use. I am running Ubuntu 10.
thanks
Click to expand...
Click to collapse
i would have to agree that Wolfbreak's CM 6.1.3 would be the rom of choice. It is super stable and quite fast too.
You will need to root your phone, and then install xRecovery. Then you can install ROMS from the xRecovery menu.
Root using superoneclick and then copy the xRecovery APK to your phone and install it. Download the ROM files and copy them to your SD card, reboot into xRecovery and follow the ROM installation steps (backup all your stuff on your phone first - i suggest My Backup Root (from the market) - provided you have rooted it already). If you want to try different basebands, i have included a link for them too.
As for doing all this from ubuntu - i think you will need to be running a Windows VM or find another pc that has Windows installed, i tried from Ubuntu myself but it was just easier from a Winblows machine.
SuperOneClick - http://forum.xda-developers.com/showthread.php?t=906248&highlight=superoneclick
xRecovery - http://forum.xda-developers.com/showthread.php?t=859571
Wolfbreaks ROM - http://forum.xda-developers.com/showthread.php?t=945264
BaseBand list - http://forum.xda-developers.com/showthread.php?t=960527
Have fun!
Tim.
I'm also kind of a noob, but I really want to make this stuff work...
I took this thread as a base, I currently have the 2.1 official update on my X10. So far I used the superclick tool and it said it rooted my phone (how can I make sure it worked?)
Then I downloaded the stuff and run the xRecovery app, it said it granted some superuser thing, but then I see nothing else...
Any help appreciated, specially if I skipped some steps maybe?
if you want to check if you are rooted, intall titanium backup and see if the app runs. If it does, then you've got root.
I didnt get what you wanted to ask in the second part of your question though..
I was missing an app from the market
Ok I got it working
So far I'm testing this new stuff...woah, amazing.
Any recommendations of things (ROMs) I should try?
p.s. I got no signal and WiFi won't turn on... I guess this is normal?
@ aR_ChRiS and mrtim123
Second that Wolfbreak's CM 6.1.3 is one of the most complete 2.2 roms. But you'll want to look up post on how to:
- root your phone
- install xRecovery (requires busybox), and how to use it
In case if you "brick" your phone or get stuck in a boot loop, look up for "flashtool".
Hope this helps.
--
Edit:
Link to FlashTool: click
Link to the reference post for x10: click
I put together an easy to follow with step by step instructions and made it as noob proof as possible. Check it out, follow the guide in my sig. Iv tried to explain everything in as much detail as possible
Sent from my X10 using XDA Premium App
Does every thing work. for example the camera and wifi?
mrtim123 said:
i would have to agree that Wolfbreak's CM 6.1.3 would be the rom of choice. It is super stable and quite fast too.
You will need to root your phone, and then install xRecovery. Then you can install ROMS from the xRecovery menu.
Root using superoneclick and then copy the xRecovery APK to your phone and install it. Download the ROM files and copy them to your SD card, reboot into xRecovery and follow the ROM installation steps (backup all your stuff on your phone first - i suggest My Backup Root (from the market) - provided you have rooted it already). If you want to try different basebands, i have included a link for them too.
As for doing all this from ubuntu - i think you will need to be running a Windows VM or find another pc that has Windows installed, i tried from Ubuntu myself but it was just easier from a Winblows machine.
SuperOneClick - http://forum.xda-developers.com/showthread.php?t=906248&highlight=superoneclick
xRecovery - http://forum.xda-developers.com/showthread.php?t=859571
Wolfbreaks ROM - http://forum.xda-developers.com/showthread.php?t=945264
BaseBand list - http://forum.xda-developers.com/showthread.php?t=960527
Have fun!
Tim.
Click to expand...
Click to collapse
Does Wi-fi work with this rom? And the camera?
Brunop10 said:
Does Wi-fi work with this rom? And the camera?
Click to expand...
Click to collapse
WIFI, camera and everything else works great for me. Except for the camcoder, it's got a bit of audio sync problem if not using the right setting.
bebolf said:
WIFI, camera and everything else works great for me. Except for the camcoder, it's got a bit of audio sync problem if not using the right setting.
Click to expand...
Click to collapse
How do you get it to the right setting? and someone told me it drains your battery. is this true?
Yes battery life isn't that great but acceptable for me.
~24 hours under medium usage
~12-15 hours under heavy use
You need to have your focus setting set to infinity to have better audio sync.
To be honest I don't think the camcorder is up to average user's standard, but camera works just fine.
Things I like from this rom are:
- improved performance (very few lags, things run much smoother than stock 2.1 especially when texting)
- android 2.2 apps & features (gmail 2.3, flash, JIT...)
- no random reboots
- the unlock slider does not lag after the screen is off for awhile
Known issues to my knowledge:
- incomplete camcorder
- no live wallpaper
In case you haven't noticed tho, devs here have figured out a way to bypass x10's bootloader. This will enable us to load custom kernels.
All the roms here before the breakthrough are only built on top of the stock 2.1 kernel. That's causing some limitations in developing custom roms (issues such as having a working driver for x10 camera)
So if u can wait for a bit I'm sure there will be better roms (with android 2.3) coming in the next couple months! And Sony has announced there will be official 2.3 upgrade coming possibly during this summer.
However I've been using wolfbreak's CM 6.1.3 for over a month now, would really recommend it if ur not that into video recording lol
bebolf said:
In case you haven't noticed tho, devs here have figured out a way to bypass x10's bootloader. This will enable us to load custom kernels.
All the roms here before the breakthrough are only built on top of the stock 2.1 kernel. That's causing some limitations in developing custom roms (issues such as having a working driver for x10 camera)
So if u can wait for a bit I'm sure there will be better roms (with android 2.3) coming in the next couple months! And Sony has announced there will be official 2.3 upgrade coming possibly during this summer.
However I've been using wolfbreak's CM 6.1.3 for over a month now, would really recommend it if ur not that into video recording lol
Click to expand...
Click to collapse
Yes, 2.3.3 kernal+CM7 would kick ass.
Sent from my X10i using XDA App
Most of the cm 6^ roms have camera fixes now. Im running ol cm6.1.2 xtremes. Not an issue at all. Cam works great.
Sent from my SE_X10i using my thumbs
super one click not working
hi i have tried using super one click root v1.7 on my windows laptop. It stays on waitng for device or it craches. what am i doing wrong. i am using windows Xp.
thanks
mrizz18540 said:
hi i have tried using super one click root v1.7 on my windows laptop. It stays on waitng for device or it craches. what am i doing wrong. i am using windows Xp.
thanks
Click to expand...
Click to collapse
Did you go in ur phone's setting -> application, turn on "unknown source", and to -> development to turn on "USB debugging"?
thanks
thanks for your help everyone i have everything figured out. well i am having trouble installing xrecovery. when i tried to install it. it says xrecovery installer could not be installed on this phone.
thanks

ROM WildPuzzleROM_2.2.1 v0.8 -> problems. -> No wallpapers!

Hello
I have little problems.
When I'm done with the installation (install rom)) I don't have HTC wallpapers ..
http://imageshack.us/photo/my-images/151/snap20110624224710.png/
It's just empty
http://imageshack.us/photo/my-images/221/snap20110624224718.png/
http://imageshack.us/photo/my-images/847/snap20110624224723.png/
I donn't have scene too (menu/scene/) -it's all empty
http://imageshack.us/photo/my-images/8/snap20110624224756.png/
http://imageshack.us/photo/my-images/830/snap20110624224917.png/
I tried to install v6 at first, then flach v8 (without wipe) and there are still no wallpapers!
When I open 0001_WildPuzzleROM_v0.8.zip from the PC .. I see wallpapers there.
So they didn't copy during the installation?!
if it matters I root my phone with AlphaRev. In the moment I'm with recovery-clockwork-3.2.0.0.zip + recovery-clockwork-2.5.0.7-buzz.zip
see that:
Baseband version:
11.55.55.24H_3.35.20.10
Kernel version:
2.6.32.21-g8f75634
I did not go on cus I'm not sure is everything is going to be ok.
P.S.
When I calc 10 post - i copy this here:
http://forum.xda-developers.com/showthread.php?t=877243
You're not alone. I have same problem, too. There's a lot more missing things like setup wizard, input languages other than English, etc... Not just wildpuzzle, same situation applies to some other custom roms I tried.
Weird thing is that there's no problem with old wildpuzzle 8.0.11. Maybe some dev would come out and compare it with others to find out what's wrong.
Sent from my HTC Wildfire using XDA App
Did you expect a developer's software to be better than Stock version?
And what that suppose to mean??? :-/
Sent from my HTC Wildfire using XDA App
I had same problem with my daughters wildfire she has s-off with alpha rev,I have s-off with xtc clip and never had this(I have wildfire too).also sunaabh rom same thing no wallpapers or scenes,so I used one of my wildpuzzle nandroids then did factory reset,wonder what the problem is?
HTC wildfire cyanogenmod nightly
hboot -1.01 s-off
@bynge: It doesn't matter even if you flash a ruu dude, I tried it. There's no problem with wildpuzzle 8.0.11. So in your words, does this mean wildpuzzle developer's work is better than stock?
Anyway, do you have any solution to the situation, or...?
Sent from my HTC Wildfire using XDA App
Same problem with the rom Jokerdroid and DK. I have noted that also the tone gallery in empty (if i open the stock notification editor for incoming calls i found the tones, when i search for them with other applications like alarm clock i can only use the downloaded ones)
bynge said:
Did you expect a developer's software to be better than Stock version?
Click to expand...
Click to collapse
Yes, and in my view, it is. If you cannot offer a solution, atleast don't troll.
Solution:
Install old version (131.9mb) -> everything is OK.
flash new v8(126.3mb) without wipe and still OK (wallpapers and scenes)
now tested other things.
sry for bad EN.
bynge said:
Did you expect a developer's software to be better than Stock version?
Click to expand...
Click to collapse
100%.
The things that are limited by stock version will be overcomed by dev software.
Personally i got S-OFF, bluetooth wireless pan tethering (kernel dependent) , live wall papers, better battery, and many other things.....
If everyone tells what they got benefited by dev software, then the list will be really huge.....
I also heard that wifi N and newer htc sense got enabled in devices that are not supported by stock (not sure about sense). Depends on what u consider. IMO, like i said 100%.
Voklav said:
Solution:
Install old version (131.9mb) -> everything is OK.
flash new v8(126.3mb) without wipe and still OK (wallpapers and scenes)
now tested other things.
sry for bad EN.
Click to expand...
Click to collapse
but if you ever hard reset ithen it will stop working again
rickwyatt said:
but if you ever hard reset ithen it will stop working again
Click to expand...
Click to collapse
Yes, that's a temporary solution.
Sent from my HTC Wildfire using XDA App
I make backup ... If someting wrong - restore ...
=> never use hard reset
Can anyone figure out why there's not a problem with wildpuzzle 8.0.11? That could lead us to a real solution.
Sent from my HTC Wildfire using XDA App
supendal said:
Can anyone figure out why there's not a problem with wildpuzzle 8.0.11? That could lead us to a real solution.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Try to compare the update-script files of both, and see if there is any part "missing" or something.
If both are alike/the same, then create a recovery-logfile just after flashing the latest wildpuzzle rom. Perhaps it will clear some things.
Erwin
Could it be a problem related to AlphaRev?
this morning i've flashed an ruu stock rom and the problem is still here: empty htc wallpaper.
I doubt this is a wildpuzzle bug cause I've never flash one of those rom (only cyanogen, jokerdroid, dk).
the only things in common are alpharev and clockworkmode (i'm using cwm2.5) but the latter is out there since too long to discover a bug just now.
I restore stock and no problem ..
did you restore stock through recovery or the executable ruu?
metv said:
did you restore stock through recovery or the executable ruu?
Click to expand...
Click to collapse
I flashed ruu via fastboot using pc49img.zip method and problem is still there. Exe file always interrupted by battery lower than %30 error no matter what is battery level.
And yes, it's not a wildpuzzle related error. It happens in all custom roms and ruu except wildpuzzle 8.0.11.
Sent from my HTC Wildfire using XDA App

Beta Test for BootManager(multi-boot app)

We've gotten alot of response from the Desire community so thank you all for your help. At this time we do not need any more testers for the desire. BootManager should be updated with support for the Htc Desire in the next few days. The app currently won't support rom's that use apps2sd and data2sd but our team is working on getting support for those as well. Thanks.
Hey guys my team has developed an app called bootmanager which went into the market today. The app let's you install rom's to your sdcard and boot between them. I had originally done an inc only version here that used your recovery for installing rom's. The new app installs the rom's directly through the app and then let's you boot between them. Anyway on to the point of this post...i'm looking for 1 or 2 beta testers to add support for the desire. You'll need a little knowledge of adb, root of course, and just a little bit of patience. So far has worked pretty well on every htc device wev'e tried so I'm confident we can add support for the desire as well. You can get a little more info about the app from the link in my sig or looking at it in the market. If your interested pm me so I can get the info needed for the desire(.i.e partition sizes and a few other things that i'll tell you how to find in adb) and I'll send the apk for you to try. Thanks for your help....
Very interesting app! Would hboot have to be compatible (ie right size) with all the installed roms or as they are installed to SD does it not matter?
all43 said:
Very interesting app! Would hboot have to be compatible (ie right size) with all the installed roms or as they are installed to SD does it not matter?
Click to expand...
Click to collapse
by hboot your refferring to the bootloader? This doesn't change the bootloader. It makes img's on your sdcard which hold your system/data/cache files for the rom, then it edits the boot.img for that rom to point to those img's when booting. Then the app flashes the boot.img for the rom you want to boot too.
I would be very interested in trying this out as I pretty much change my ROM on a daily to weekly basis haha, I just can't stop! This would be a good way to nurture my need for all the ROMs I switch between all of the time.
Would this app work on a non rooted phone? I mean having the stock ROM in the phone and a rooted one on the SDcard. But I guess it wouln't...
gauco said:
Would this app work on a non rooted phone? I mean having the stock ROM in the phone and a rooted one on the SDcard. But I guess it wouln't...
Click to expand...
Click to collapse
No you need an unlocked bootloader to switch the boot.img. And root to do a number of other things involved in setting up the rom.
lathanub said:
I would be very interested in trying this out as I pretty much change my ROM on a daily to weekly basis haha, I just can't stop! This would be a good way to nurture my need for all the ROMs I switch between all of the time.
Click to expand...
Click to collapse
Once you go MIUI you don't go back I can't bring myself to use anything else LOL!
Oh I tried MIUI-XJ, it's nice to know that you're happy with it ^^ I used it for about three to four days and felt that I was using an iPhone more so than an Android and I prefer the feel/look of Android devices... I loved being able to theme it so easily, though. I like the transparency mods in NeoPhyte ROMs and bits and pieces of many others... I should just figure out how to make my own.
I hope that you got my response, Conap! My sent items folder said I hadn't sent anything but I am most positive that I did so I will wait to hear back from you =D.
Yeah, sure I could help with the testing... Do you want somebody with that knows ADB etc..?
got Miui XJ on phone rom and tried to boot CM7.
working without problems so far!
thank you. gonna look into this now
Should we run the update after the rom has been installed, so it updates the boot.img ? Haven't tried running the update.zip directly from bootmanager yet, but works fine from recovery.
Installed MIUI-108050 on my HTC Desire (stock boot/S-ON)
looks fantastic....im new to android and my desire but i am currently using neo's reflex s rom and i love it...i really want to try MIUI but i love reflex!
Gonna sticky this thread, keep up the hard work
i tried to install cm7 on rom slot1 but it says no rom installed when i tried to boot it.. on htc desire (running custom official gingerbread).. any idea?
yeahman45 said:
i tried to install cm7 on rom slot1 but it says no rom installed when i tried to boot it.. on htc desire (running custom official gingerbread).. any idea?
Click to expand...
Click to collapse
+1
me too installed rom in slot 1 try to run it
and then it says no rom installed
Great app, I currently have successfully installed and used on my Desire, Leedroid 3.0.8.2, Redux 1.2, Miui xj1.7.22 and Cyanogmod on slots, with Oxygen as the phone rom!
sebastiaan15 said:
+1
me too installed rom in slot 1 try to run it
and then it says no rom installed
Click to expand...
Click to collapse
+2
installed in rom slot 1 on my htc desire says no rom
thanks yo much for your nice work man!
I CANT flash any rom on my desire,
thried ext2 and ext4 for all roms, tried the one with a2sd and also tried the roms without a2sd (miui au)
all will fail with this dialog appear "does this rom support ext2?" , and the i can only press 'okay' , then it will clean itself....
whats wrong herre?
maybe not compatible with sense based rom? cuz according to the replies here, only aosp roms seem to work

I Need some good advice for my Wildfire

Hello guys, I own a wildfire and I'm having a bad time with it.
I use Launcher pro, lot of widgets installed, 2gb card that has very few free space and my problem is that it is SLOOOOOOOOOOOOOOOOW.
Slow as hell.
I just cant stand it anymore.
I have stock rom, not even rooted, all stock except launcher and widgets.
I need advice on what steps should I do to make it run smoothly, cuz I'm half step from throwing it out of the window.
Give some advice on the steps I sould do, root, custom rom, oveclock, anything that might work.
Also, if you can post me the threads for the steps I should do, I would be grateful.
Thanks!
I definetely would root it and use setCPU and overclock it.
And put your apps on the SD card instead of internal memory.
That would help I suppose.
But for sure there are other real experts that can help you
Good luck
Voliminal_8 said:
Hello guys, I own a wildfire and I'm having a bad time with it.
I use Launcher pro, lot of widgets installed, 2gb card that has very few free space and my problem is that it is SLOOOOOOOOOOOOOOOOW.
Slow as hell.
I just cant stand it anymore.
I have stock rom, not even rooted, all stock except launcher and widgets.
I need advice on what steps should I do to make it run smoothly, cuz I'm half step from throwing it out of the window.
Give some advice on the steps I sould do, root, custom rom, oveclock, anything that might work.
Also, if you can post me the threads for the steps I should do, I would be grateful.
Thanks!
Click to expand...
Click to collapse
Hi I suggest you take a look in the wildfire buzz ''dev'' section. I would root and try some roms. CyanogenMod 7 I use with overclock and its alot faster/ smoother. Also got some tweaks to improve it more. I hope this helps you.
Henkdrenth said:
I definetely would root it and use setCPU and overclock it.
And put your apps on the SD card instead of internal memory.
That would help I suppose.
But for sure there are other real experts that can help you
Good luck
Click to expand...
Click to collapse
I already have moved movable apps, I have to root it now hmmm
apollopayne said:
Hi I suggest you take a look in the wildfire buzz ''dev'' section. I would root and try some roms. CyanogenMod 7 I use with overclock and its alot faster/ smoother. Also got some tweaks to improve it more. I hope this helps you.
Click to expand...
Click to collapse
When you say tweaks?
I've seen stuff for the CM7, and it seems pretty cool, does this version works corectly? everytin?
Should I follow this guide: http://forum.xda-developers.com/showthread.php?t=1365159
Why downgrading hboot?
Voliminal_8 said:
Hello guys, I own a wildfire and I'm having a bad time with it.
I use Launcher pro, lot of widgets installed, 2gb card that has very few free space and my problem is that it is SLOOOOOOOOOOOOOOOOW.
Slow as hell.
I just cant stand it anymore.
I have stock rom, not even rooted, all stock except launcher and widgets.
I need advice on what steps should I do to make it run smoothly, cuz I'm half step from throwing it out of the window.
Give some advice on the steps I sould do, root, custom rom, oveclock, anything that might work.
Also, if you can post me the threads for the steps I should do, I would be grateful.
Thanks!
Click to expand...
Click to collapse
buy a galaxy gio 120 euros and you have one or a other mobile because the wildfire would be forever slow im happy thats mine wildfire is broken.
tweaks are for cm7 and can be used on other roms. Depends on what you need. Also cm7 has its own tweaking in settings. As for downgrading, if you are on hboot 1.01.0002 then you need to downgrade to 1.01.0001. Or if you on 80.00002(something like that can't remember exact number), i would upgrade to 1.01.0001. Revolutionary only at present works with 1.01.0001 as far as I'm aware. But honestly I think you will like the difference once done.
Bro, I even start to type and the whole phone lags, when I open handcent sms, it takes A CENTURY to open....
I hope the difference will be noticable.
Is CM7 the most stable?
Can I have a backup to my current state? So in case something goes bad I can recover?
just go for cyanogenmod 7.1.0.1 stable, that should do the trick for you. will be faster and smoother and with decent app2sd. and yes you can do a backup, its called a nandroid back up and you perform it from your custom recovery( dont worry you`ll get one during the process of rooting ect). a nandroid back up is and exact copy of how your phone is now. rom/apps/appinfo everything. so if **** hits the fan you can always go backto your nandroid backup. also if all else fails you can use a htc program called a ruu which will completely revert the phone back to stock. hboot recovery rom all of it
I just rooted and installed CM7. I have a problem, I followed this guide here: http://forum.xda-developers.com/showthread.php?t=1365159
And I used the backup at the step 31, with the revolutionary thing.
Well before the wipe, I backed up a lot of things, except my contacts. Is there any way I can find them inside this backup that was made during step 31?
Well the phone runs a little bit more faster but not that fast.
I'll try OC and we'll see.
kaassaus said:
buy a galaxy gio 120 euros and you have one or a other mobile because the wildfire would be forever slow im happy thats mine wildfire is broken.
Click to expand...
Click to collapse
And so are we!
Sent from my HTC Wildfire using xda premium
kaassaus said:
buy a galaxy gio 120 euros and you have one or a other mobile because the wildfire would be forever slow im happy thats mine wildfire is broken.
Click to expand...
Click to collapse
I'm glad your wildfire is broken too.so leave this forum to people who care about theirs and go cook some Roms for the gio.
You pissed me right off.
regards,slymobi
Voliminal_8 said:
I just rooted and installed CM7. I have a problem, I followed this guide here: http://forum.xda-developers.com/showthread.php?t=1365159
And I used the backup at the step 31, with the revolutionary thing.
Well before the wipe, I backed up a lot of things, except my contacts. Is there any way I can find them inside this backup that was made during step 31?
Well the phone runs a little bit more faster but not that fast.
I'll try OC and we'll see.
Click to expand...
Click to collapse
Are your contacts on your sim card? Try and import from your sim.
Sent using my phone.
doubleon said:
Are your contacts on your sim card? Try and import from your sim.
Sent using my phone.
Click to expand...
Click to collapse
If it was that simple I wouldnt bother to ask, so no
From market download appextractor and u can recover ur contacts from nandroid backup
procyon-1 said:
From market download appextractor and u can recover ur contacts from nandroid backup
Click to expand...
Click to collapse
or make a nandroid backup, then restore your previous backup, download an app called contact2sim and copy all of your contacts over to your sim. and then reflash your nandroid. or i think the stock contacts app has the ability to export all your contacts to your sdcard as a .xml file, take that and then you can out them on your other nandroid and on your pc for safe keeping
kaassaus said:
buy a galaxy gio 120 euros and you have one or a other mobile because the wildfire would be forever slow im happy thats mine wildfire is broken.
Click to expand...
Click to collapse
After spending alot on the wildfire. It seems stupid to buy a second smartphone. Mine runs buttery smooth on a custom rom. Without overclock.
Sent from my HTC Wildfire using XDA App
slymobi said:
I'm glad your wildfire is broken too.so leave this forum to people who care about theirs and go cook some Roms for the gio.
You pissed me right off.
regards,slymobi
Click to expand...
Click to collapse
+1 to that!!
Boot your phone and try some other roms, always work when my phone get a delay

Recently bought this phone and I'm confused

I've been got this phone and I'm confused I've been doing a lot of reading... and I'm wondering in order to install Roms do I need to root unlock and have the tools... do I just need to root it... I'm extremely confused any help is greatly appreciated .
Sent from my LG Thrill running acidHAZARD 3.5 w/ sense battery mod
JReeher said:
I've been got this phone and I'm confused I've been doing a lot of reading... and I'm wondering in order to install Roms do I need to root unlock and have the tools... do I just need to root it... I'm extremely confused any help is greatly appreciated .
Sent from my LG Thrill running acidHAZARD 3.5 w/ sense battery mod
Click to expand...
Click to collapse
In order to install roms you have to install magldr and flash the rom.
You need to root your current (I assume stock?) rom only if you're going to go with it.
See the post in my sig for more details.
EnderPsp said:
In order to install roms you have to install magldr and flash the rom.
You need to root your current (I assume stock?) rom only if you're going to go with it.
See the post in my sig for more details.
Click to expand...
Click to collapse
Yeah I just got it ... Its completely stock.. I just did alot of reading and it talks about root tools magldr chevron or whatever seems like alot ... An I'm coming from the thrill where superone click and just flash a zip worked for me very simple lol
Sent from my SGH-i677 using XDA Windows Phone 7 App
JReeher said:
Yeah I just got it ... Its completely stock.. I just did alot of reading and it talks about root tools magldr chevron or whatever seems like alot ... An I'm coming from the thrill where superone click and just flash a zip worked for me very simple lol
Sent from my SGH-i677 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
You made a good choice switching away from the Thrill... That thing eats battery life for breakfast, lunch and dinner. There are a few good devs over in the Thrill forum though.
jlink38 said:
You made a good choice switching away from the Thrill... That thing eats battery life for breakfast, lunch and dinner. There are a few good devs over in the Thrill forum though.
Click to expand...
Click to collapse
Yeah I've been reading trying to figure out what the benefits to flashing roms rooting and unlocking this phone and I haven't found much ...I like the phone aside from the fact that alot of the free apps on the thrill aren't free on this phone
Sent from my SGH-i677 using XDA Windows Phone 7 App
JReeher said:
Yeah I've been reading trying to figure out what the benefits to flashing roms rooting and unlocking this phone and I haven't found much ...I like the phone aside from the fact that alot of the free apps on the thrill aren't free on this phone
Sent from my SGH-i677 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
What's the benefit of flashing any custom ROM? It's not different for WP7 than any other OS.
Unlocking the phone -> you can sideload apps/games
There is no rooting for WP7, there is interop unlock.
Flashing roms -> customize the OS and unlock included (custom ones)
EnderPsp said:
What's the benefit of flashing any custom ROM? It's not different for WP7 than any other OS.
Unlocking the phone -> you can sideload apps/games
There is no rooting for WP7, there is interop unlock.
Flashing roms -> customize the OS and unlock included (custom ones)
Click to expand...
Click to collapse
First ever windows phone... not quite sure what you mean by sideloading
Sent from my LG Thrill running acidHAZARD 3.5 w/ sense battery mod
JReeher said:
First ever windows phone... not quite sure what you mean by sideloading
Sent from my LG Thrill running acidHAZARD 3.5 w/ sense battery mod
Click to expand...
Click to collapse
Welcome to the community
Sideloading means installing application/games on the phone, once you have the binaries (XAPs). Similar to installing APK files on Android.
I'm getting you have a Focus Flash i667. Just FYI there is only unlock but no custom rom for Samsung 2nd generation phones, not yet. I initially assumed you have a Samsung Focus i917 since you didn't specify in your first post.
Do not try any stuff on 2nd generation WP7 yet (e.g. roms) unless they're designed for it. For example, flashing a custom i917 ROM on your i667 will brick it.
If it's a bit confusing it's because both phones are Focus, but one is i917 (the original Focus) and the other one is i667 (Flash). There is no dedicated i667 Focus Flash forum...
EnderPsp said:
Welcome to the community
Sideloading means installing application/games on the phone, once you have the binaries (XAPs). Similar to installing APK files on Android.
I'm getting you have a Focus Flash i667. Just FYI there is only unlock but no custom rom for Samsung 2nd generation phones, not yet. I initially assumed you have a Samsung Focus i917 since you didn't specify in your first post.
Do not try any stuff on 2nd generation WP7 yet (e.g. roms) unless they're designed for it. For example, flashing a custom i917 ROM on your i667 will brick it.
If it's a bit confusing it's because both phones are Focus, but one is i917 (the original Focus) and the other one is i667 (Flash). There is no dedicated i667 Focus Flash forum...
Click to expand...
Click to collapse
Thank you.. I'm not a noob to xda .. I've done alot of searching and reading before I post anything just seems like alot to me ... so far I've got the window break done on the phone I'm installing all the stuff on the computer right now ... but when I install the TOM_xap .. it keeps giving me an error sayin the registry key HKEY_CLASSES_ROOT/xap is denied so I'm trying to figure that out
JReeher said:
Thank you.. I'm not a noob to xda .. I've done alot of searching and reading before I post anything just seems like alot to me ... so far I've got the window break done on the phone I'm installing all the stuff on the computer right now ... but when I install the TOM_xap .. it keeps giving me an error sayin the registry key HKEY_CLASSES_ROOT/xap is denied so I'm trying to figure that out
Click to expand...
Click to collapse
To deploy use these:
Winco's mini WP7 SDK and Winco's deployer wXapAssistant
Anything else you can try later
EnderPsp said:
To deploy use these:
Winco's mini WP7 SDK and Winco's deployer wXapAssistant
Anything else you can try later
Click to expand...
Click to collapse
Yeah I have both of those on my computer still gets the same error... and when I try to install Samsung tools says my phone isn't connected but zune show sgh-i667... could I use chevron unlock seems a little easier?
Sent from my LG Thrill running acidHAZARD 3.5 w/ sense battery mod
JReeher said:
Yeah I have both of those on my computer still gets the same error... and when I try to install Samsung tools says my phone isn't connected but zune show sgh-i667... could I use chevron unlock seems a little easier?
Sent from my LG Thrill running acidHAZARD 3.5 w/ sense battery mod
Click to expand...
Click to collapse
Nope, Chevron worked for earlier version of WP7 OS...
Seems like a driver/software issue to me. Read carefully and try the steps again. GL...
EnderPsp said:
Nope, Chevron worked for earlier version of WP7 OS...
Seems like a driver/software issue to me. Read carefully and try the steps again. GL...
Click to expand...
Click to collapse
Hmm so should I delete everything that has to do with the phone... zune drivers everything ?
Sent from my LG Thrill running acidHAZARD 3.5 w/ sense battery mod
JReeher said:
Hmm so should I delete everything that has to do with the phone... zune drivers everything ?
Sent from my LG Thrill running acidHAZARD 3.5 w/ sense battery mod
Click to expand...
Click to collapse
Now I'm getting some error about some bootstrap. DLL not being found when I'm looking right at it in the damn folder.. I'm going back to my thrill... this is a waste of time...
Sent from my LG Thrill running acidHAZARD 3.5 w/ sense battery mod
Honestly if there wasn't a thriving dev community for these devices I wouldn't even be upset, as WP7 is so good out of the box, custom ROMs are just icing on the cake. Good luck to you.
Sent from my SGH-i917 using Board Express
jlink38 said:
Honestly if there wasn't a thriving dev community for these devices I wouldn't even be upset, as WP7 is so good out of the box, custom ROMs are just icing on the cake. Good luck to you.
Sent from my SGH-i917 using Board Express
Click to expand...
Click to collapse
I just get mad... I finally got Samsung tools on my phone I just can't get the diagprov.xap it's not extracting to xap... so when I use installer it's not picking it up to add it to my phone
Sent from my LG Thrill running acidHAZARD 3.5 w/ sense battery mod
JReeher said:
I just get mad... I finally got Samsung tools on my phone I just can't get the diagprov.xap it's not extracting to xap... so when I use installer it's not picking it up to add it to my phone
Sent from my LG Thrill running acidHAZARD 3.5 w/ sense battery mod
Click to expand...
Click to collapse
What Diagnosis version do you have? Some versions block provisioning, afaik.
Hmm I'm not sure how to tell my diagnosis .. And why would that be blocking it on my computer ?
Sent from my SGH-i677 using XDA Windows Phone 7 App
Look, use super one click, get rom manager, flash recivery for lg p500 old bb( baseband), and the go to recovery, install zip from sd, pick ur rom and thats it, but firs back up stock rom+kernel using rom manager. Its on my blog in details argue4android.blogspot.com
Sent from my LG-P500 using XDA
russian392 said:
Look, use super one click, get rom manager, flash recivery for lg p500 old bb( baseband), and the go to recovery, install zip from sd, pick ur rom and thats it, but firs back up stock rom+kernel using rom manager. Its on my blog in details argue4android.blogspot.com
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
You can do this with the Samsung focus flash?
Sent from my SGH-i677 using XDA Windows Phone 7 App

Categories

Resources