[Q] - 3G connection - HD2 General

Hi!
In this week i had a problem:
When i try to make a 3G data connection, i see a error message:
"Dialed:
Cannot connect for an unknow reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according yo your manufacturer's documentation and try again."
I'm using the last energy rom! The problem persist with Stock rom.
When i use my SIM on other phone, 3G works fine!

Related

Having problems to use JasJar as wireless modem via USB :?

Hi all,
Yesterday I was trying to set up the JasJar to serve as USB modem for my laptop. I have found a complete step by step manual on http://forum.xda-developers.com/viewtopic.php?t=37298 post. I have tried to do all steps twice to be sure that everything is OK. But after 10 attempts to establish the connection I have gave up.
My phone is in Orange network in Poland. User name and password to access the internet from PDA via GPRS is ‘idea’ and ‘idea’. The access point name is ‘internet’. Those setting works fine on my PDA and should work as parameters for the Dial-up connection on the computer as well.
While I connect to the internet on my laptop via JasJar the connection process stalls on “Registering your computer on the network”. After that after few more seconds the GPRS connection on PDA is being disconnected. Does anybody know what’s wrong?
I have installed the latest version of the firmware available on iMate site (JASJAR_WWE_13076_164_10900_wwe_ship.exe)
Best regards
Marek Suski
Hi,
had the same problem with it in the beginning.
If you followed the detailed description I can only assume this problem:
You missed to insert the APN in the Wireless Modem driver on the PDA (this piece of Software is on the PDA; I have the German version where it is called "Funkmodem").
Go to Extras | Options at the bottom left within the Wireless Modem and tick the option you see there.
Then again insert into the box "Access Point Name" the correct APN of your operator.
Then it should work.
I think you know that the modem on the PDA has first to be started and then the PDA connected with the PC, because otherwise ActiveSync would start.
Post here if it works now or if you need further help !
I actually have a different problem: I've set it up as per the guides. But when I want to start the connection it doesn't work. Here's what I do:
1. Disable USB connecctions in ActiveSync
2. start Wireless Modem on MDA Pro
3. Connect cable to MDA
4. Start the connection. It starts dialling, but after 10 seconds comes up with a 692 error code. Apparently, this means: "Error 692: There was a hardware failure in the modem (or other connecting device)."
Also, when I look in the Wireless Modem application, the little square indicating Connection activity always remains yellow. I presume that upon succesful connection it will turn green?
Any thoughts, anyone?

Unable to connect to GPRS - Ultimate 9502 ** RESOLVED**

I seek other 9502 ultimate owners and experts advice on the below:
Upon trying to connect to the internet using the GPRS functionality, I always receive the following error message:
“Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap settings. If the problem continues, reset your mobile device according to your manufacturer’s documentation and try again”
I have tried the following steps:
- Reviewed the connection settings picked up by the Imate configurator upon first boot, they were correct.
- Tried to remove the SIM card and use it on my JAMin, the device connected smoothly (with the above same connection settings).
- Hard reseted the device, still it didn’t connect.
- Checked the Operator settings of my provider on the internet, they are the same ones loaded by the Imate Configurator
- Tried another SIM card, same thing
- Went to the service provider and changed the SIM card and got a new one, same error
I shall appreciate any assistance.
UPDATE
Finally!!!!
After installing the new WM 6.1, the device connected smoothly
.
From a 9502 owner
Hi, I have read your post and looked at my Ultimate to find anything obvious and I cannot. I am on O2 in the UK and used the configurator settings which worked fine. If there are any settngs you would like me to verify for you, let me know.
Oh! did you check the phone settings as well as the network connection settings, it's possible that a default in there does not tally with your provider (Goto the Wireless Manager and Tap MENU|PHONE SETTINGS).
Cheers
Eden
GPRS - Ultimate 9502
Thx for your reply.
I have tried every possible combination of Network / Band selection from the phone settings but it didn't work.
Imate have responded that it may be a ROM issue and that they are working on an new updated ROM to be available soon that will probably solve the problem.
Meanwhile i am trying to figure out some registery tweak that could fix the problem (trial and error)
WM 6.1 Link please
Can you please post the link to the WM 6.1 ROM that resolved your problem.
Thanks
iMate 9502 WM 6.1 ROM
http://forum.xda-developers.com/showthread.php?t=407336&referrerid=676710

[Q] I can't access the internet via Data Connection

Hi All,
I have recently installed the DFT ROM om my HD2, I want to sync my contacts using my Windows Live account.
I got this message every time I tried to access the network data connection:
"can't connect
We're having a problem connecting to windows live. make sure you have good reception. if you do, the problem may be on the other end. wait a little while and try again"
and if I tried to access gmail:
"Not updated We're having a problem connecting to m.google.com. try again later.
Error Code: 80072FA8"
I tried both data connection and 3G connection.
does this ROM have such problems? what is the best ROM to install instead of my current ROM?
All the other roms are directly based off the original DFT rom. Only major difference would be the chevron is built in. Was fantastic for me since I had all sort of connect problems with chevron. I would use a rom that has that built in.
As far as data goes you would probably have to enter your apn. I had to. Or an easier way would be to load a rom that had chevron built in and download HTC Connection Setup from the market or sideload it and that should straighten that out.

[Q] unable to enable data connection.

Hi,
I am using samsung galaxy 3, [purchased in November 2010] it came up with android version 2.1. while i am using same version i used to enable/disable the data connection by dialing *#*#4636#*#* and phone information ->more ->disable/enable data connection filed . it working fine there.
Recently i upgraded my phone to android 2.2 after that using same method i disable the data connection, but after that if i want to enable data connection[using same method mentioned above] it is not enabling and it is not showing any error also.
please help me out how to overcome this problem.
Thanks,
sai
Just reboot phone after you enable data connection...it'll work for sure...we all had this bug when we were on froyo
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Hercolubus Rom v 2.0
powered by
G3mod by Arakmar 12/04/2012.zip
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Even after reboot i am unable to connect to data connection. :-(
mvsksai said:
Even after reboot i am unable to connect to data connection. :-(
Click to expand...
Click to collapse
Do you have the right apn settings setup? (thats in Settings/Wireless and network/Mobile networks/Acces Point Names) with my provider I needed to do it manually to acces mobile data. (actually I had to text a certain number wich would give me the proper settings). Maybe you can check that?
Actually when ever we click on "enable data connection" [irrespective of VPN settings] it should enable, after that only it will check for VPN settings for which SMSC have to connect. But here "enable data connection" it self not reflecting change of type to "Enable" .

Need help for ls980 data to work

I am using lg g2 ls980(unlocked for sim) . I could make calls,text etc but unable to connect to data (internet) and get error “unable to establish wireless data network”
It happened after
>> I write nv and rf using dfs (but now I have restored with the original backup)
before that it was working fine
my apn settings are correct
internet perfectly working with wifi
i don't know what other thing i could try and what is the cause of the problem?
i would be very thankful i someone solve this problem....... smartphone with no data really frustrated.

Categories

Resources