Hi,
I tried to connect my XDA to my works wireless network. I needed to get my MAC address added to the DHCP server so my IP address is assigned automatically in my department.
So, when I turn on my Wi-fi it finds the network and I select 'connects to Internet'. The connection now appears as 'available'. Next I tell it to connect and it displays 'connecting.....' then simply returns back to displaying 'available' again. No connection, no error message.
Does anyone have any idea what I may have done wrong? Surely if using DHCP I dont have to configure DNS etc?
Any advice would be great.
I had the same problem with my home wifi.
My wifi router was transmitting on wifi G only.
And when i changed it to B+G wifi transmission,and then it worked.
I then realised that the Exec has in fact a wifi B only...(i thought it had a G since windows mobile 5 is supporting G... but no...)
Hi, I replaced my zyxel wireless modem router with a new Belkin N1 wireless modem router.
I configured the belkin with same wep details as old router. My wireless music steaming devide, my laptop and my Wii all connected right away - no problems - so I know the wep key etc is entered ok. BUT my phone will no longer connect.
My phone does connect ot the wireless network in my work place.
I rebooted the phone, no joy! Reset it, no joy!
I switched off the belkin and put the zyxel back on, and it connects at home.
I tried switching the belkin to broadcast G, no joy!
When I try to get it to connect to the network it shows all gren bars - so the signal is strong.
I dont use mac filtering.
Out of ideas - anybody know a solution?
Qtek 9100, win mobile 5, aku2
I have my Tattoo rooted with 1.6 (can't recall the ROM name) with build number 1.67.405.6. Almost everything works fine except the connection with my home WiFi network. It's a PPPoE connection through ADSL modem. Next in line is the Netgear WG602 v3 WiFi router. At the beginning I couldn't connect at all so I changed the router's ROM to DD-WRT. Now I can connect with the router but no connection to the internet whatsoever. I can ping my router through my Tattoo, I can even open the 192.168.1.1 and mess around with its software but no connection to the internet. It is only limited to my Tattoo as I can connect through my laptop, through my other mobile (HTC S710) and also I can connect my Tattoo with any other WiFi (Secured or Open) with no problems at all.
I tried with no Security, with WEP, with WPA-PSK to no avail. Any other clues?
try running htc mail while you are using your wifi throuf your tattoo it worked for me
What is supposed to happen if I do that? I'm trying it as soon as I get home btw.
Nothing happened
Hi all...sorry for my interference but this problem is similar to mine.
I'm going mad from many weeks trying connect my Huawei Ideos (U8150) to my home wlan through a netgear VG602v3 AP. No way to do this.
Wifi works from my laptop and from my girlfriend's laptop, but from ideos it doesn't.
I turned off all wireless device in my house, I tried with/without WPA, I tried open network from channel #1 to channel #13, tried changing ssid and I also tried praying .
There is a weak wifi near here: it is on channel #1 and its power is between -89 and -82db. My wifi power (data from kismet) is between -50 and -18 db and is configured on channel #11.
In any cases, even if I put my Ideos near to AP antenna the story is ever the same:
- Ideos indentify the wifi network
- Ideos acquire the IP
- I open the browser or the android market and...
- Ideos lose connection...and so on.
I downloaded from work wifi (crypted with WPA) a wifi scanner from app store: it shows me the neighbour's weak wifi and my wifi network which appear and disappear recurrently.
Please, someone helps me (without suggest to buy another AP!!), any suggestions are welcome!!
Have you tried logging into the router and checking the privileges for devices. Some of them have a security element that restricts the use of the internet on newly connected devices until the setting is changed. I had a similar problem with a new laptop.
hope it helps.
I checked every setting to no avail. I still think somehow that my problem is with my router or adsl modem which doesn't connect automatically with PPPoE and Android doesn't have any command or software to initiate a PPPoE connection.
Other than that... Can't find any solution. Until then, I use connectify on my Win7 laptop. The thing is that I have to keep my laptop switched on as long as I'm in the house.
alpick36 said:
Have you tried logging into the router and checking the privileges for devices. Some of them have a security element that restricts the use of the internet on newly connected devices until the setting is changed. I had a similar problem with a new laptop.
hope it helps.
Click to expand...
Click to collapse
thank you for suggestion. I looked in depth but I did not found the option of which you were talking about. The unique solution still remains change the AP!!!
WiFi and Netgear Router
I think I finally found the answer. It appears Netgear routers support something called WiFi Multimedia. Its a QOS methodology. I disabled WiFi MM or WIMM as its sometimes called, as well as Internet QOS and all my problems connecting to web pages, the market, etc. through WiFi disappeared.
Strange that older versions of the ROM supported WIMM (or ignored it) and newer ones don't. But that solved the problem for me with no real degradation of performance on any of my other computers.
Good luck.
Hi, just got a MOTO XOOM and i have set up my wifi network. I currently have a extender connected to my router wirelessly and I am having problems connecting. I can connect directly to my router ( which is upstairs) but I cant get the XOOM to connect to the router ( which is downstairs) . I do currently have my laptop connected thru the extender, and it works great. ANyone else have any connection issues with a extender. This seems to extend out to more then the XOOM cause i have a Vizio tablet and same thing, it shows the extender when it searches for WIFI but it wont connect, just says obtaining IP then connects directly to the Router. Please any info would help. thanks
I have this virtual WIFI router built in Windows 7. I think it is called Microsost Mini WIFI adapter. My N4 sees the wifi signal very strong but can not connect.
It says "Obtaining IP address" but never connects.
This virtual WIFI router uses WAP2 system by the way.
Can someone help me?
misterno123 said:
I have this virtual WIFI router built in Windows 7. I think it is called Microsost Mini WIFI adapter. My N4 sees the wifi signal very strong but can not connect.
It says "Obtaining IP address" but never connects.
This virtual WIFI router uses WAP2 system by the way.
Can someone help me?
Click to expand...
Click to collapse
eventually your Router have no internet or you have the Mac filter onhttp://forum.xda-developers.com/images/smilies/confused.gif
Try WPS
If the current setting gives the error , try using WPS . For that see your Router settings . My Samsung Galaxy R gave me problems and i tried that option which worked