How to make wifi the default option to connect instead of gprs? - Touch Diamond2, Pure General

How do I disable the phone from auto connecting to gprs? I tried testing it by launching opera without switching on wifi. The phone still connects through gprs although I turn data connection off. It will turn data connection on by itself. Even when I switch wifi on and want it to connect through wifi instead, it is still connecting through gprs. How do i solve this?

When wifi is "connected" (not only "on"), it uses wifi, no dataconnection.
If you really don't want a dataconnection, use something like NoData...

i tried NoData but it's not working. i'm using official htc wm6.5 rom.

Sorry I cannot be more precise because I don't use it anymore, but I remember there was an option to block data connection in HDTweak. Is that you want? Block dataconnection permanently? If so, you could alternatively delete your mobile operator connection in Settings/Connections. If anyone knows the registry changes involved in this,please post them so that I can make a .cab, I need it when roaming.

try MWLongLife! It's magic
this program is developed for saving battrey life by controlling 3G/2G network and data usage
you can set each program which need data access by 3G, WiFi, USB, etc.
Also, force to use Wifi rather than gprs if it's available.

Thanks for all of the suggestions. I tried installing nodata again and it worked this time.

for those interested there's also a cab to disable push internet completely (think that was the origin of your problem).
Search the forum on NoPushInternet

336663 said:
try MWLongLife! It's magic
this program is developed for saving battrey life by controlling 3G/2G network and data usage
you can set each program which need data access by 3G, WiFi, USB, etc.
Also, force to use Wifi rather than gprs if it's available.
Click to expand...
Click to collapse
Any link to this? didn't find anything around

sualc said:
Any link to this? didn't find anything around
Click to expand...
Click to collapse
Yes please... I was about to post the same issue. I think the precedence in WM6.5 of using mobile wireless over WiFi is the wrong way around if the WiFi signal is strong. In my house, my WiFi is strong everywhere but 3G comes and goes. It's darn annoying to get the message about "No connectivity" when I know for sure there is a very good WiFi signal.
Cheers, Rob.
PS. Just had it whilst writing this email - "Messages cannot be downloaded to your mobile device..."

It's "WM" not "MW".
http://www.freewarepocketpc.net/ppc-download-wmlonglife.html

That's much better!! thanks fighter7139, gonna try right now!

Related

Cingular 8525 - Can we disable GPRS/EDGE and use only Wi-Fi ?

Is it possible to setup the 8525 so that it only connects to internet through Wi-Fi and not any of the other options? Based on some threads, it looked like Cingular has disabled this option, but I am not quite sure. Thanks.
The only way I was able to do it was to call Cingular Tech and have them disable the GPRS on their end, now if I go to PIE and the WiFi is off, the GPRS/EDGE Connection pop-up opens, then I get an error message saying the network could not be found and a dismiss icon....
The only way it will connect to IE is through WiFi now.
ringostar said:
Is it possible to setup the 8525 so that it only connects to internet through Wi-Fi and not any of the other options? Based on some threads, it looked like Cingular has disabled this option, but I am not quite sure. Thanks.
Click to expand...
Click to collapse
if you go to settings then connection and delete the connection settings for gprs it will not connect and you can use wifi only
however i seem to keep getting gprs not connected error if i do so?
I'm having the same problem. I'm totally green to the high tech world. Heck this is my first attempt at anything greater than using my calculator function in a phone So if someone could walk me through what I need to do to set my phone up so I can connet through wifi i would reaaaally appreciate it.
I had Cingular put me on the no data plan (not even pay per use). In case that makes a difference.
Thanks in advance for the help.
All I did was go in to the connection settings and change the User name and Password. I do not get any error messages stating the network cannot be found. I get a login screen with User/Pass and Domain. I just click cancel and it drops back to IE.
Now I do not have to worry about accidentally connecting to their service.
well,we can very much achieve it -- In the internet settings in connections,select both of them to My ISP,edit it to nowap.cingular.com
Make sure setting is set to Internet,not work!
I did it and I use only wifi all the time!!
The previous solutions are not really workable for me since I don't want to delete my cellular data connection, I just want to be able to turn it on and off as I choose. With Windows Live, I can have a Wifi connection and turn off cellular data in the comm manager screen and it will just open the cellular connection again.
A hack to turn off the "auto connect" for the cellular data would be great. Make it like the BT or WIFI, where I have to go to the comm screen and turn it on. That choice would be great.
Anyhow, I am thinking of making the Work connection as the default, then deleting all work connections. Then when I actually want a cellular data connection, I could manually select it and say connect. I'm not sure if the applications will close it and try the work connection again or not. I will try it and post again, probably tomorrow.
MM
This works wonders:
http://www.benrichards.co.uk/?p=180
ETA: This is what I have been using to deal with gprs autoconnect on my 8525 and it's perfect for my uses. You just start the program and toggle on or off the data connections.
Gprs Disable
It really works thanks for your research

HTC Weather using Wifi ???

Hi,
I did search the whole forum for answers but in vain. Whenever I access weather tab and update the info, it updates using 3G/HSDPA.
But, what I want is to update using wifi at home. Is there an option to make it use wifi instead of 3G/HSDPA?
Pls lemme know coz it wud help me save a few penny
TIA
SK
Well I did the following.
1) As I don't want any applications (in background or by request) to update via any Phone Network I deleted the internet setting.
Now I can connect via USB or Wifi and then download, both work.
If I do it when I am not connected then I get an error message (as I have no internet connection setup).
So this works for me but also means I have to remake a internet connection if and when I want to download of phone network.
I have no flat rate data plan so its my only choice, maybe others have a better idea.
really strange, mine uses wifi and if there is no wifi, it relies on gprs.
cx2k5 said:
really strange, mine uses wifi and if there is no wifi, it relies on gprs.
Click to expand...
Click to collapse
Which is correct as far as I can see.
The issue here seems to be he does not want to download via gprs and I have yet to find an option that allows you to turn it off.
The choices are Download automatically
Download weather when roaming
What is missing is that stops you downloading via GPRS but allows you to download via WIFI and when connected.
Problem
cx2k5 said:
really strange, mine uses wifi and if there is no wifi, it relies on gprs.
Click to expand...
Click to collapse
Thanks 2 all for ur reply
Actually the problem is:
I have router at home and my touch hd connects to wifi to update mails, etc.. But when I switch to weather and update, it somehow doesnt identify the wifi connection. Instead uses 3G for updating...is it happening only in my mobile?
And I guess nodata might just work...lemme chk that out ....Thanks a ton
Mine too used to use what it wanted, hspda as first choice. So i deleted the 3g configuration. From what i have read, it is a WM problem: no way to set 3G as secondary choice
bbonzz said:
Mine too used to use what it wanted, hspda as first choice. So i deleted the 3g configuration. From what i have read, it is a WM problem: no way to set 3G as secondary choice
Click to expand...
Click to collapse
oh i c...pls tell me how u deleted the 3g config and then did that take wifi for updating after doing so???
sriramkrishnan06 said:
oh i c...pls tell me how u deleted the 3g config and then did that take wifi for updating after doing so???
Click to expand...
Click to collapse
start->settings->connections->connections
here you see (don't know how exactely in english, since i have italian)
internet (???)
work
under internet, "modify"
enter there, and delete your 3G account.
Now back in connections, go advanced->select (net???) [the first button over composition rules]
Here select "work" for everything.
Now, without 3G, the phone connects to internet only if you have an active wifi, otherways doesn't connect.
Wouldnt it just be easier to use the HD tweak utility to disable internet access via 3G/GPRS/HSDPA? - just a thought guys, instead of deleting settings which may be required at a later time (i.e. when no WIFI is available)
My weather updates fine via WIFI,
My emails (using a hotmail account) keep trying to update via 3G though - I can't get it to do it via WIFI unless I use Windows Live to login then update emails
Would, but as you see there are problems (and i suspect hd tweak kills also mms's, since excludes all data connections). Instead, deleting the account, is easier. I can always reinstall it with the connection wizard.
try this: disable or delete your gprs connection, enable wifi and try to download weather data. if successful, then re-enable your gprs connection and see if it still prefers to use gprs or wifi at first place.
Use modaco NoData to make sure the 3g connection is never used.
Done
Thanx a ton for ur help...I used Nodata and my work was done...sweet and simple...
Thanx
I have a similar problem, just wanted to open a topic about it
Unfortunate, weather is not updating any more, no Wifi, no 3G.
I do not mind it using 3G, but it's not updatingf, nothing works.
I am not even sure how to delete the default 3g connections.
i will try .. i hope i will not have to hard reset the phone again
Ummm... u bought £500 phone and yet can't afford a 50kb 3G/GPRS bandwidth per month?!
Quite intriguing
@zoomee
To make email use WIFI and 3G as a fallback, in email account settings change connection to "The Internet" (it's probably set to your 3G Access point e.g. "T-mobile internet")
Maybe your settings are wrong. Does QuickGPS work? If it doesn't, then check your settings. With some access points of some operators, you can only browse internet pages but not use other apps requiring internet access.
@sriramkrishnan06: no problem
I am affording a 3g Connection and Bandwidth (if that was pointed at me).
I can not get any more weather data (
I deleted as explained here some of the previous set connections to my 3g provider and also rebuild one, and still nothind
throguth Wifi it seems not to work, but through 3g, not any more
it was working before, i had to hard reset it and now it does not work any more
I think it was pointed to sriramkrishnan06.
Anyway, have you checked whether QuickGPS works or not?
The Quick GPRS works form me, Weather still does not work
I am little upset since i know i am missing something small. I am not THE thech savvy guy, but i know my whay arroud computers, (i am a web developer) still, somehow i am not able to make the damn weather work, even tried one of the "hacks" witht e weather database editoer, to load the default server, it is still not working for me.
If anyone has an idea .. please ..
If Quick GPS works then I have no idea. Are you sure you didn't mess up anything using that tool?
In any case, hard resets almost always work. If you don't want to, you could do a full backup with Resco Backup or similar, hard reset, test the weather, then restore the backup.

Connection wi-fi still uses 3G--HELP!!

I think the subject says it all.
After I connect via Wi-Fi, the phone still connects via 3G...
What am I doing wrong?
HastaSSSS
Goto wifi settings and set the access point to connect to "Internet" instead of "Work".
Some app will force "Internet" connection and not just use the active one.
I had the same problem.
Try going to Start/settings/connections/wifi/advanced/power mode and slide to the far left (best performance)
None of the suggestions works...
I have to use Nodata to block the 3G connection, otherwise, even connected via Wi-Fi, it would still syncronize the 3G
No other suggestions, guys?
HastaSSSS
Yeah I have the same problem. I go into Comm Manager, switch off the data connection, make sure the WIFI connection is set as 'the internet' instead of 'work', and I even tried the suggestion above about setting the power level to best performance. Still, if I click send/receive, it opens the data connection and ignores the WIFI completely.
If anyone has a solution to this, PLEASE help!
Seriously, M'soft and HTC are useless...I love the design and features of this phone, but there are so many things like this which are very poorly thought out.
s1rl4ncel0t said:
None of the suggestions works...
I have to use Nodata to block the 3G connection, otherwise, even connected via Wi-Fi, it would still syncronize the 3G
No other suggestions, guys?
Click to expand...
Click to collapse
I have same problem and like yourself have to use no data to block 3G connection for wifi to work
Would appreciate any other suggestions
Solves it for me
trice1921 said:
I had the same problem.
Try going to Start/settings/connections/wifi/advanced/power mode and slide to the far left (best performance)
Click to expand...
Click to collapse
Wierd, but this solved the problem for me.
Previous, the connection was made, but no data to the wifi-lan.
Slider to "best-performance" and it worked.

How do you force WiFi connection ?

Reflashed my Jade from UK Orange to JADEMAN rom recently...
I don't think this is a ROm related problem (unless you know otherwise !) so I have posted in general part of forum.
Can anyone tell me how to force the phone to use Wifi to connect to the internet.
It connects via GPRS fine but i want to disable the GPRS DATA for travels abroad so I don't run up a huge data bill. I can stop the data with "NoData" app, but if I now try to connect to internet with Opera or Internet explorer if fails..
Is there something I am missing, to tell it either to connect via wifi before using GPRS data or to only connect via wifi. Do I need to create a connection ?
The create new connection page doesn't list using WiFi, bluetooth is the only "WIRELESS" type connection that appears to be offered.
Also when the wireless AP list is shown and I try to connect to an AP showing available that I have previously setup with WEP key etc, it fails to connect.
I am sure to be missing something but I can't spot what the problem is...
Any help appreciated.....
Phil
Normally Windows Mobile connects via WiFi first, if available, and only when not present it uses GPRS. That means that you do not need to disable GPRS if an WiFi-connection is established.
I have no personal experiences with "NoData". Perhaps someone else can help.
phil-w said:
Can anyone tell me how to force the phone to use Wifi to connect to the internet.
It connects via GPRS fine but i want to disable the GPRS DATA for travels abroad so I don't run up a huge data bill. I can stop the data with "NoData" app, but if I now try to connect to internet with Opera or Internet explorer if fails..
Is there something I am missing, to tell it either to connect via wifi before using GPRS data or to only connect via wifi. Do I need to create a connection ?
The create new connection page doesn't list using WiFi, bluetooth is the only "WIRELESS" type connection that appears to be offered.
Also when the wireless AP list is shown and I try to connect to an AP showing available that I have previously setup with WEP key etc, it fails to connect.
Any help appreciated.....
Phil
Click to expand...
Click to collapse
MvBoe said:
Normally Windows Mobile connects via WiFi first, if available, and only when not present it uses GPRS. That means that you do not need to disable GPRS if an WiFi-connection is established.
I have no personal experiences with "NoData". Perhaps someone else can help.
Click to expand...
Click to collapse
AFAIK the moment you invoke any app that requires internet connection (weather update, activesync, opera) Jade invokes data connection first (3G, GPRS, etc) That's how it works on my set. Unless you invoke Wi-Fi connection first, then data connection is ignored.
I have had a bad experience that even if all setups are ok Wi-Fi conn thru Ap fails.
Corrected such a way;
Under 'Wireless /Lan' settings
Power mode should be brought to 'best performance'
azahidi said:
AFAIK the moment you invoke any app that requires internet connection (weather update, activesync, opera) Jade invokes data connection first (3G, GPRS, etc) That's how it works on my set. Unless you invoke Wi-Fi connection first, then data connection is ignored.
Click to expand...
Click to collapse
That's what I meant: You have to activate WiFi by yourself to prevent jade using GPRS (etc.). Your description is more precise, I did not make it clear enough. Thanks for correction.
Hi and thanks for replies so far...
I have just done a hard reset to make sure I haven't loaded anything that may mess up the wifi connection... Even when wifi is on and I am connected to a wifi access point OK it still uses gprs/3g not wifi..
Back to the "drawing board" I think...
Any more ideas please...
Phil-w
with this app you can disable or enable data connections as you please.
there is another app here in the xda that will disable data when roming automatically, but i don't remember the name.
faria said:
with this app you can disable or enable data connections as you please.
there is another app here in the xda that will disable data when roming automatically, but i don't remember the name.
Click to expand...
Click to collapse
Hi faria
Unfortunately I find it better to go into connection manager, select airplane mode, then enable wifi. Then do any surfing, live messenger etc. Then once finished go back into connection manager, re-enable phone.
Like others, I'm on Orange, wifi no longer stays the internet source even if it is connected. I have it on all the time, but if I use the internet, I have to go through the above procedure or it costs me credit through Orange.
Janeway
janeway said:
Unfortunately I find it better to go into connection manager, select airplane mode, then enable wifi. Then do any surfing, live messenger etc. Then once finished go back into connection manager, re-enable phone.
Click to expand...
Click to collapse
The only disadvantage is here is that, you'll miss calls when there are incoming calls because your phone is inactive (while PDA is). You can just disable data connection (CommManager - Data Connection - off) and leave wi-fi connected.
Like others, I'm on Orange, wifi no longer stays the internet source even if it is connected. I have it on all the time, but if I use the internet, I have to go through the above procedure or it costs me credit through Orange.
Click to expand...
Click to collapse
Just wondering.. how you identify which connection is being used, wi-fi or 3G/GPRS when both are connected.
What if you disconnect data connection (3G/GPRS) without activating the airplane mode, can you surf using wi-fi connection.
One possible reason - set connected to the AP via wi-fi but AP is not connected to internet, thus set seeks 3G as another route to internet.
Hi azahidi, thanks for taking time to reply to me . Your points as follows:
Yes, missing calls is the disadvantage, but I use my pda more for data and hardly any calls, so not so important for me, but obviously we be much better if that were possible as I do sometimes forget to swich back. If I disable the data connection, it automatically re-initializes itself as soon as ANY data is being transmitted - even with just wifi active - except when it is in airplane mode. This is a new thing for me with the Jade, didn't have that problem before with my previous HTC phone.
There is an icon for the 3G - when its in use it shows it - it goes from being a large G in a square to a smaller one with signal bars.
Wifi is definitely connected, I surf online with it all the time.
Its like 3G has priority over wifi - there should be a way to change that.
Hope the above makes sense.
Janeway
I'ven been using 'Nodata' succesfull the last past months, it does it's job well, but i'm not on Orange as you are, that might be the difference.
Just to be sure i've also changed my settings:
start > settings > connections > connections > advanced > select network > My work network (twice).
and
start > settings > connections >advanced network > uncheck HSDPA and in SMS choose 'GSM'
(all is translated from Dutch, hope i used the right words)
Thanks Nirak.
One of my settings was wrong - I should have known that from last time, but my brain's elsewhere at the moment!
Must have upset it when I flashed
Cheers for now.
phil-w said:
Hi and thanks for replies so far...
I have just done a hard reset to make sure I haven't loaded anything that may mess up the wifi connection... Even when wifi is on and I am connected to a wifi access point OK it still uses gprs/3g not wifi..
Back to the "drawing board" I think...
Any more ideas please...
Phil-w
Click to expand...
Click to collapse
Phil, can't you simply switch the "Data Connection" on/off switch to 'off' ?
I have it in the Comm Manager right at the bottom. The Wi-Fi and Phone could be left 'on'. I can't try if it works because I only use the phone on 2G.
Joe
jfranek said:
Phil, can't you simply switch the "Data Connection" on/off switch to 'off' ? I have it in the Comm Manager right at the bottom. The Wi-Fi and Phone could be left 'on'. Joe
Click to expand...
Click to collapse
That's how it should work actually. Either one, Wi-Fi or 3g/GPRS. But what phil is saying is that it also activates data connection (3G/GPRS) even when wi-fi is connected.
On my set, and in my network (not Orange but standard GSM).. this is how it works :
The moment I invoke any application that requires internet connection (weather update, activesync, opera, etc) Jade invokes data connection first (3G, GPRS, etc). Unless if I invoke Wi-Fi connection on first, then data connection is ignored, it will stay off.
So what I normally do is, whenever I want to use internet, I connect using wi-fi then browse the internet. If there is no available AP, then I turn off wi-fi and continue browsing , which is then connected using 3G/GPRS/EDGE?HSDPA
azahidi said:
(...) The moment I invoke any application that requires internet connection (weather update, activesync, opera, etc) Jade invokes data connection first (3G, GPRS, etc). Unless if I invoke Wi-Fi connection on first, then data connection is ignored, it will stay off.
So what I normally do is, whenever I want to use internet, I connect using wi-fi then browse the internet. If there is no available AP, then I turn off wi-fi and continue browsing , which is then connected using 3G/GPRS/EDGE?HSDPA
Click to expand...
Click to collapse
This is the way it normally works and should work under WindowsMobile. The Orange-ROM seems to be "manipulated" by the provider (?) not to work in this desirable way. All (or some?) Orange-ROM-Handsets seem to activate the data connection (3G/GPRS) every time ignoring the established Wi-Fi-connection. This rises the providers business volume.
It would appear to be correct about orange having had the method of connection changed.
I have just found and installed a different RADIO.ROM to my Orange Touch 3G and now it appears to connect as required.
Still not 100pc happy but will post my observations later with the rom numbers if it helps anyone else out..
Phil-w
Look on the HTC JADE reflashing on this site
Hi All,
There is no way around the Orange apps to enable WiFi, but I successfully reflashed the Roms in my Orange touch 3g yesterday.
Have a look here for the details on what to do:
http://forum.xda-developers.com/showthread.php?t=514406
Follow the instructions carefully, and I chose to install the Stock HTC ROM 1.40.721.2 from the ROM post.
Wifi is then free....
)
Well I appear to have got around the Orange Unique problem.
I upgraded the Rom on my Orange UK Touch 3G to the Jademan SuperRom V3. That got rid of the Unique side of things but with no improvement with Wifi connectivity.
The connectivity problem with wifi still caused problems, the internet connection would NOT use wifi even if I disabled the GPRS / 3G data connection with "NoData" It just returned a message saying it had failed to connect.
I decided to find a new radio rom image which I managed to on this Jade forum. I flashed the new rom and tested the same connections again. This time the wifi connected via Wifi first and without any problem... It would appear that flashing the Jademan rom didn't update the radio as well, I needed to update the radio as well.
The clue may be in the radio rom version number,
Original orange 0.29.30.U23
New Radio rom 0.41.30.12
A assume that the U in the orange rom refers to "Unique", which now I have replaced it, it appears to have cured the wifi problem and it is working just as any other Non-Orange Jade / Touch 3G does....
I have not noticed any problems with any other radio related issues since the upgrade, GPS, 3G/GPRS etc all seem to be fine.
I do find that the phone does struggle to connect with some Dlink AP's though... It may be a problem with the Dlink more than the phone but I still need to do more tests on that.
May be that will help a few other people out there...
Phil-w
Hi Phil,
I had exactly the same problem!
Started with an unlocked HTC Touch 3G with Orange customised ROM and then replaced it with the SuperROM. WiFi was unusable so (having read your post) I re-flashed with the standard ROM released from HTC and then re-flashed the SuperROM. This gave me the same Radio ROM that you show above however the WiFi problems seemed to be no better.
While I liked the idea of having the SuperROM I have gone back to the latest standard HTC ROM and all seems to be well.
John
Hi John,
My wifi now seems fine except not liking Dlink AP's for some reason.
I don't even need to stop gprs data with NoData etc, if there is a wifi connection available that I have setup previously it will use that rather than GPRS..
I appear to have "de-Oranged" it !!!
What probs do you still have on your Touch 3G ??
Phil

setting connection preference ???

is there a way to make sure the phone only connects to my home wi fi hub when at home and does not connect via my 3g vodafone connection. I want it to automatically select the fastest link and not waste my 3g allowance ? I've searched but cannot find a solution, thanks
+1 good idea, anyone got anything on this?
Andi,
The solution I would use would be to go to Settings>Wireless Controls and simply switch Data Connections off, Wifi On when at home.
You would have to remember to to reverse this when done if you want to access 3G services.
WB
u could use G-Profile.. It allows you to set up different profiles and switch them automatically based on your current cell id. Wifi on/3G off when at home, other way around when not. Works like a charm for me
thanks for the tip but when I do that it then automatically turns it back on even when I'm connected to the wireless hub, all of a sudden they both are on . . . . . . .?? any ideas ??
i have the same problem... it keeps using my 3G/EDGE network even if WIFI is available... and i dont get it how can HTC afford not to give us an option to set that the phone asks you for permission when connecting to 3G/EDGE network... this **** costs and im not really happy about the fact that my phone can connect to a network whenever it feels like.
(and yes this **** keeps happening even tho i disabled automatic updates in weather/time applications.)
In BSB tweaks if you press options I think there is an option to disable all data connections. I have never tried it but maybe it will override all connection attempt? Give it a try. Also, I flashed to the 2.01 ROM and I think the data connections are a little less persistent, though I don't wan't to guarantee anything!
andi1977dog said:
is there a way to make sure the phone only connects to my home wi fi hub when at home and does not connect via my 3g vodafone connection. I want it to automatically select the fastest link and not waste my 3g allowance ? I've searched but cannot find a solution, thanks
Click to expand...
Click to collapse
does it not do that by default? i cant send emails through t-email when i'm at home - I just presumed this was because i was connected through my wireless router. turning off wifi allows me to send emails.
thus I presumed wifi takes preference?
I am wondering the same thing. The idealist situation would be to have both connections active at the same time, and let the HD2 make sure that wifi is used when the connection is there. Is there some kind of application to verify which connection is being used?
Great thread - I am not the only HD2 owner who is annoyed with the problem with the HD2 switching on its GRPS data connection without my approval!!!
Could it be that the HD2 turns off the wifi when it goes to sleep and then tries to connect to the web using the GPRS network? In that case how do I prevent turning off WIFI when in sleepmode?
I read somewhere else in this forum about a G-profile. Being a newbie with HTC I have no idea what this is. Any clue?
But overall: Yes, it would be great if HTC added an option to set network connection preferences.
WiFi does take preference if it's connected! Dont forget when you are at home and you turn your phone on from standby it will take 10sec or so to connect to your WiFi router, if you try and use IE, Opera, Twitter, Weather Update, Email, etc... before it's connected it will fire up your 3G data connection!
The phone does not how ever turn off your data conn when it's idle which is annoying! You need to use Bandswitch or CommManager from here http://www.commmgrpro.com/jsp/main_frame.jsf;jsessionid=103F335931311F019BD540B82E479383 or WMLonglife from this forum (do a search).
there must be someone out there with ghe know how and expertise to solve this ?? glad to see its an issue for othet folk, i like the idea for selecting wi fi over gprs if its there to be selected.......
I found out that my HD2 automatically closes the 3G connection when I have wifi active. I'm not sure why it does that, I know pretty sure that it had not always done that. But I'm quite happy with it
It turns 3G on again after disconnecting from WIFI, which is what I want.
so if you tap the notifications tab and the "contratc internet" is counting and the wi fii is connected it is using the wifi and not the "contract internet" even though the timer is counting ???
Can anyone confirm ???
p.s tried using the G-Profile software, it seems very inconsistant and didnt always turn off what it should when you select the profile so im going to unistall it.
for some reason the automatic internet settings from vodafone messes up/hides the "The Internet" or "MyISP" connection that is in the phone originally.. I even hard resetted but you just can't seem to stop the automatic settings..
disable the proxy of the "Vodafone live!" connection and it will work.. just like twitter etc..
the same with email only checking through 3G and not wifi.. but set the server settings of your account to "The Internet" after you disabled the proxy.. (advanced settings at the smpt server tab)
hope this helps.. but a thing worries me, as I don't know anything about proxies, why does vodafone specify a proxy if we don't realy need one.. to port us over their live portal or something? (on my old sony ericsson the track ID service didn't work because of that)
"disable the proxy of the "Vodafone live!" connection and it will work.. just like twitter etc.."
thanks but how do i do this ??
anyone know how i do this ? thanks
After including the Taskmanager as a quick link in HTC Sense I am now able to close all programs. Now I do no longer experience any unfortunate GPRS connections when connected to WIFI.
Only problem is that when running on batteries the WIFI connection is closed down when the unit enters sleepmode. However during sleepmode, if I have not closed down programs accessing the web these are now able to connect to the web by using the GPRS connection.
Why on Earth has HTS decided to decipher a click on the X as MINIMIZE and not CLOSE!!!
tnyborg said:
After including the Taskmanager as a quick link in HTC Sense I am now able to close all programs. Now I do no longer experience any unfortunate GPRS connections when connected to WIFI.
Only problem is that when running on batteries the WIFI connection is closed down when the unit enters sleepmode. However during sleepmode, if I have not closed down programs accessing the web these are now able to connect to the web by using the GPRS connection.
Why on Earth has HTS decided to decipher a click on the X as MINIMIZE and not CLOSE!!!
Click to expand...
Click to collapse
I believe my Wifi connection is kept alive, even in sleepmode.
Josan123 said:
I believe my Wifi connection is kept alive, even in sleepmode.
Click to expand...
Click to collapse
Sorry, forgot to mention this - but in order to save battery power I have asked the unit to close down the WIFI when in sleepmode (using BsB Tweaks). And indeed it gives me more battery life.

Categories

Resources