Reassign standby button, possible? - 8125, K-JAM, P4300, MDA Vario General

Hey all,
since today my Wizard is acting strange. The on/off/standby-button (the one on top of the device) is acting on it's own.
Whenever I'm just surfin' the web, I have a pretty big chance the device will turn the screen off. Also I sometimes get the "Warning, Device will be off, and may lose some data ....."-warning, which means the button has been "pressed" for ~four seconds.
I suspect this is a hardware problem (not too strange after 2.5 years) which I can't easily fix.
I do wonder however, if it's possible to reassign the on/off/standby button to something else and assign the on/off/standby functionality to another button (camera for example).
Anybody any ideas?

Related

Auto Power Off, Cingular 8125

Hi guys...
I am as techy as the rest of yew, maybe more so, but I am having a problem understanding one thing about this phone. I know it is something very simple that I am missing, but I can't find anything about it anywhere in the docs, either?
How does the "auto power off" feature work? What I mean by this is, I know we can turn the power off after two minutes or whatever, but I see that the green GSM radio light is still flashing. That's good, that's what we want because we want to be able to receive calls.
The problem I am having is that after a time (I am guessing it is the two minutes?) I can't get the screen to come back on? What am I missing here? Is it me, or is it a bad phone? Auto power off seems to make the phone unuseable until a soft reset.
I tried pushing the power button, nothing. I tried HOLDING the power button, nothing. I tried pushing the TALK button, nothing.
Is the auto power off different than pushing the power button once and putting the device to sleep? What I want is the device to go to sleep after two minutes. I want to be able to use the phone again without doing a soft reset every time.
I know this is something easy, but I can't quite figure it out?
Thomas <><
[email protected]
www.thomasamckean.com
Colonel, HOKC
Author, Soon Will Come The Light: A View From Inside The Autism Puzzle
Author, Light On The Horizon: A Deeper View From Inside The Autism Puzzle
I've been having a similar issue with my 8125. I seem to also have a problem when I turn the device off. I've been trying to pinpoint the circumstances, but haven't had any luck as of yet.
Have you made any progress with this?
hold the power bottom for 3-5 seconds , there will apper a Yes/No dia.tap yes will real shut off. Not good at eng.But is it easy to understand ?
i had a similiar issue recently on a phone i had forever, turns out that i installed GPRS connection monitor that turned the backlight off on my phone... after hitting the power button to wake it up it appeared my screen was still off, so if i turned it at the right angle i could see my today screen.. meaning the backlight was off, i had to keep it at that angle and navigate into the setting menu to turn the backlight on.. i couldnt find a fix for it so i uninstalled the GPRS monitor and havent had the problem since

Mystery input problem

My M700 (orange rom, new radio rom) is having problems with the buttons (or is it?)
Basically, I noticed things were happening without me pressing buttons, occasionally (like when Im in a phone call) it will flash up that I cannot put this call on hold (though I didnt try to)- or when I'm in GPS (TomTom) it occasionally goes back to the options screen without me pressing anything.
I also noticed that occasionally the scroll wheel wont work on the side, and if i press the memo button opposite, it goes to the "realign my screen" program (which happens when you press them both together) but then it works normally again
Finally the little directional pad at the bottom has stopped working sometimes (including the button in the middle, but not the buttons surrounding them ie ok, windows hang up, make a call etc) -
Anyway - it seems to me like either there is a software problem, or that one of the buttons is being activated continuously, possibly by dirt, which might explain the intermittent nature of the fault.
Does anybody have any similar experience?
And...
What should I do - look at potential software problems, or hardware - (Im thinking hardware) should I take it to bits and clean it?
Thanks for reading my lengthy post, and I really appreciate any help from anyone, especially from people who've had this problem and fixed it
Update (2 mins later)
Whilst examining my pda, I dropped it onto the floor, and everything started working again - I'm beginning to think that its the silver button in the middle of the direction pad that is causing the fault, as when I hold it on it has all the same effects -
So, if this is the case, does anyone have any ideas, how to clean it easily? (if it is a hardware problem that is- it lives in my pocket and get pretty dusty so it could be)

broke my screen on/off button

is there an exe taht turns the screen on and off? and couldn't i just bind that to my camera button?
i did search..
thanks
You may be able to turn the screen off programatically, but how exactly would you expect to turn it on?
Of course, binding that to a button that actually works could do the trick. I think there a few freeware programs out there that allow you to change the bindings of the buttons (sry, can't remember a name, but if you google it you should be able to find one in no time).
On the other hand, phone off disables all buttons except the on/off button, so that might not work either.
i'm downloading vito button mapper now.
getting the screen to come back on was also my main concern. the only way i get it to come on now is by plugging it into the computer or resetting it. I don't always have a usb cable and a computer on hand, nor do i want to wait 5 min for my touch to restart to make a simple phone call.
any help would be GREATLY appreciated.. leaving for a trip in like an hour so i'd like to get this done..

Lock power button on TD2

Is there any way to lock the power button on the TD2?
I would like to keep the device suspended, with the screen off, even when the power button is hit.
This is to avoid that the screen of the device gets accidentally switched on when I carry it in the pocket of my jeans. This happens all the time, leading to battery drain.
I have tried TouchLockPro, it locks everything except the power button.
Any way to set this up?
Any application providing this feature?
If you lock it, how do you want to wake up the device?
I wouldn't mind finding a way to do something similar. Maybe not lock the button entirely, but make it so that you have to press the power button for a long time (say 3 secs), or press the power button and the hang up button and the same time.
no offence but if you did this wouldnt it unlock when you pull out the stylus?
and also you can change that go to start => settings => system/personal => keylock (also not sure if keylock will be installed as i dont have one, but you should be able to find it on here)
Then you can change the wake up to be any of the buttons, current setup or none.
chris10230 said:
no offence but if you did this wouldnt it unlock when you pull out the stylus?
and also you can change that go to start => settings => system/personal => keylock (also not sure if keylock will be installed as i dont have one, but you should be able to find it on here)
Then you can change the wake up to be any of the buttons, current setup or none.
Click to expand...
Click to collapse
No, this wont do what is needed. The Keylock simply stops someone from using the phone. It won't stop the screen from coming on accidental in you pocket.
You can 'lock' the phone from accidental use by pressing and holding the 'hang up' button, but again this has nothing to do with screen activation.
It is true that pulling out the stylus will both switch on and unlock the phone though, so disabling the power button may not be all bad. I still think it would be better to activate the screen via a single long button press, or some such.
Totally agree with swinster's comment and proposal.
- Lock the phone by pressing + holding "hang up" button (already implemented)
- Keep phone locked and screen off until
either stylus is pulled out
or power button and hang-up button are pressed at the same time
But disable screen-on when power button alone is pressed (like it is now).
- Anybody able to implement this proposal?
Meanwhile, how are you guys carring around your Topaz without the battery being emptied within a day (because of the described issue)?
This would be a great solution.
Mine switches on in my pocket all the time, they should have recessed the button, I thought about trying to remove it.
anorak22 said:
Meanwhile, how are you guys carring around your Topaz without the battery being emptied within a day (because of the described issue)?
Click to expand...
Click to collapse
Its a bit of an overkil, but my laptop come with me most places.
Reminds me of the Morecambe and Wise sketch (??) where the battery was the size of a suitcase.
I think I need a car charger - which brings me to another grumble - why didn't they implement a standard mini USB interface?
Standard mini usb fits and charges.
ALExander
alx37 said:
Standard mini usb fits and charges.
ALExander
Click to expand...
Click to collapse
Ooh, Ok. I thought they were different shapes. Will look into this.
[Edit - I have just read that it IS backward compatible with USB - the different shape is becasue the HTC connection supplies audio]
I'm guessing that any old Car Charger with mini USB will work then?
anorak22 said:
Is there any way to lock the power button on the TD2?
I would like to keep the device suspended, with the screen off, even when the power button is hit.
This is to avoid that the screen of the device gets accidentally switched on when I carry it in the pocket of my jeans. This happens all the time, leading to battery drain.
I have tried TouchLockPro, it locks everything except the power button.
Any way to set this up?
Any application providing this feature?
Click to expand...
Click to collapse
When you set EnableInputAtSuspend = 0, it will not unlock the power button at suspend. . It will then only awake via the Stylus. But I do not know if this setting also works on the Diamond2.
I am having some odd problems with mine if i press the power button to put it into standby. Sometimes when i press it it turns itself straight back on others it will come back on if i shake it (like the G Sensor is somehow linked to bringing it out of standby). Can you guys check this so i can confirm if i have a faulty unit please?
I think I read somewhere that someone had a similar problem - might be the stylus sensor thinking you have remove the stylus.
swinster said:
I think I read somewhere that someone had a similar problem - might be the stylus sensor thinking you have remove the stylus.
Click to expand...
Click to collapse
Thanks, sounds plausible, I'll call the supplier tomorrow.
I am sure that on my D810 I could set the lock on at zero seconds with no pin code. Then the keylock would come on every time I came out of standby but with no change of accidentally starting applications and making calls.
On my D2 the password is compulsory for keylock.
Any solution here? I don't want a pin code.
I power button fix would be even better to also save battery. The accidental turning on is a very annoying feature.
swinster said:
I think I read somewhere that someone had a similar problem - might be the stylus sensor thinking you have remove the stylus.
Click to expand...
Click to collapse
ye man,ive got this prob...the phone randomly unlocks bcoz the stylus sensor...im lookin for some application that turns the sensor off....havent found anythin yet...
This is still, by far, the most anoying "feature" of the TD2 phone. I can't believe that HTC did not have the forethought to think that people might actually put the phone in their pockets.
It should be a simple fix so that when the phone is off or in standby, the power button has to be press for say a second before the phone will come on, rather than just a single tap. They can do this to turn the phone off, so why not on?

How to lock all buttons exept power button

how to lock all buttons exept the power button in wm6.5 ?
In wm6.1 it was possible to change that in settings/keys menu. But in wm6.5 this is gone for some stupid reason!
I dont want to use ext. app like pocketshield for such a basic and simple feature.
Reason: when phone is screenlocked - any hardwarekey wake up phone from standby. And of course the screen pops up and drain battery. HD2 keys are recessed and in the pocked can easyly accidentialy get pressed. When screen weaks up for some reasons (incoming call or other notification event) the buttons are not locked and i dont need to describe what funny things can happen then (just imagine on your own). Even accidentialy changes to my settings happened in my pocket without recognising.
HTC: this is ridiculous.
Pls help. Is there maybe a easy reghack to activate this basic feature again, like it was implemented in previous Rom versions?
the button lock in WM6.5 is the same as WM6.1 (got X1 before)
but in HD2 it's different.. and I don't think anyone solved this problem yet...
No known solution indeed, apart from using S2U2, and if you want to save more battery adding proximitylock.
what if you locked the keys while you are making a call with bluetooth and you want to look in your phone? You'd have to press the "end call/power" button..
Also since the power button turns the screen off, I automaticly press the same button to turn the screen on when I'm not making a call.. I can't count the times I've ended a call by accident like this.. another great design flaw of this phone
I still hope someone will find a solution for a working hardwarebuttonlock
no one found a solution yet?
i'm having the same problem and strangely i am irritating myself to death on this,
Not a good job HTC!

Categories

Resources