Database Users

Unlocking MDA

Hi all,
I have MDA (XDA) from Austrian T-Mobile with ROM version 3.13.12 GER. I would like to unlock my device but I am not sure if this ROM-upgrade will work with my device. Can somebody give me a help?

There is no reason why it shouldnt work. Make sure you back your existing rom by sd method before proceeding.

You need to get XDA2Unlock, just go into the right forum.
But it's quite easy. I did a unlock real fast. took me a few minutes (it was brand new, so I didn;t need to make backups.)
Go to eh unlocking it forum
Niels

salo said:
Hi all,
I have MDA (XDA) from Austrian T-Mobile with ROM version 3.13.12 GER. I would like to unlock my device but I am not sure if this ROM-upgrade will work with my device. Can somebody give me a help?
Click to expand...
Click to collapse
The best ROM for unlocking your MDA I is the english 3.17.03 SER (Special Edition ROM) which has the XDA-Unlock tool built-in.
Then i would recommend a cooked version of the German T-Mobile ROM 4.00.33 with some nice Tools already included...
If you can't find the ROMs, I can help you to find them ;-)
Fidl

Backup original ROM (SPL 2.09)

Hi,
sorry if this question was asked but I could not find previous posts.
I would like to try newer ROMs on my Qtek S200, but before I'd like to backup the current, original, ROM (SPL 2.09.0000, Italian OS), just in case.
However, wizBackup (mtty 1.42) refuses to dump the ROM since the phone is not CID unlocked (the error is "You didn't get the proper security level to download a specific image"). AFAIK the only way to CID-unlock the prophet with SPL 2.xx it is to use the downgrade procedure explained elsewhere. However, in this way I would loose the original ROM before I could backup it!
Is there some way to dump the original ROM before downgrading to unlock the device?

ok, I'll ask an easier question, then
anyone has dumped (or knows from where to download) localised Qtek s200 ROMs (especially Italian)? I can find no download area at www.qtekcorp.com

Two people lookin'... indeed :lol:

I'm still having - after 3 months - the same two problems.
Has someone sorted them out ?
Thanks and excuse my bump

looking for the same thing.
I'll end up unlocking and upgrading my S200 without a backup of the original ROM. I doubt Qtek will release any upgrades since the device is quite old now.
It's a shame they did not even release the original rom for download.
So too bad, I'll take the risk and unlock the phone. I'm confident that the imate Italian ROM, though not very new, will work better than the one I have now.

My S200 is 6 months "old", and for the very first three months, it hasn't any support data on pocketdevice site because "too new".
Now is it obsolete and nobody will release anything for such brick ???
What a kind of policy is it ?
Thank you, but I think this is a dead-end policy for QTEK
Bye

Qtek S200 Original .Cab files?
Does anyone have access to the original .cab configuration files that came under the 2.09 Rom Ver. ?????
Trying to remove the Batt. & Comm Manger icon from the base of the screen.
Under the 2.09 version both icons were removed when the unit 1st configures its self and places a batt. icon on the top tool bar.
Not looking to install any additional program that monitors all of these items just want the original config .cabs that perform all of these task.
Please post link or notify via private msg, Thanks

read the wiki
the official and original 2.09 files are on the ftp server....

Jesterz said:
read the wiki
the official and original 2.09 files are on the ftp server....
Click to expand...
Click to collapse
Also in Spanish language????
Annita

searching for Proximus ROM for Hermes

Hi All,
I wonder if somebody knows where I can find a rom of Proximus in Belgium.

Hi,
I'm from Belgium also ... why would you like to have that rom? Just install the latest ROM version here available ... I think that's the best ROM you can have ...

Well, I'm also looking for that rom and more specifically for the extrom.
Proximus added some special items in that extrom which I would like to have :
The mobile TV player (and I guess you also need the certificates), a custom version of MMS composer and a cab file which sets all connection settings, etc.
So if anybody has that rom (or ExtRom), please post it here.
Regards,
Bendalf

UP!!
Anybody can HELP with that?

Up I'm really interested in that too...
In fact I want to try upgrade to WM6 but I also want to be able to put the phone back to it's original state.
I don't know if it's really possible cause I have to update all software parts...
The reason is for warranty...

Guys,
Don't know exactly what part of the ext rom you're referring to? I bought a regular Dutch TyTn and have been flashing and reflashing and reflashing again From WM5 to 6 and back again, changing SPL in between and even started a little cooking of my own.
Most of the cooked roms work (very) well, but if you really want to make sure, you need to dump your original rom first before you flash a new one. (read the wiki and all the threads you can find first)
Anyway, I hope you have as much fun as me discovering how to customize your hermes and make it do what you want, how you want it and more important, make it do what you want it to do.
Grtz.

Hi aeroke,
Thank for your answer.
In fact, I'm just waiting to be sure that I can if needed (ie: hardware problem that need warranty) I can restore the phone to the exact original state to avoid any warranty problem.
So tell me if I'm wrong but full original state is:
- original IPL
- original SPL
- original radio rom
- original rom
- original extended rom
For now, I try to find each "original pieces" before upgrading
- for extended rom: I unhide it and simply copy/paste content of "Extended_rom" folder to my computer. Is it the right way ?
- for rom: I find a tutorial on the wiki and I'll follow it this evening, I hope I can do that
- for radio rom, IPL, SPL: for now, I don't know if it's possible to get (by dumping or downloading) the original ones and restore them after
I write all the informations I found in my phone for the original versions, here there are:
HERM200
IPL-1.00
HERM200
SPL-1.04
version ROM: 1.18.256.2
Date ROM: 07/2/06
version Radio: 1.03.03.10
version de Protocole: 32.34.7010.01H
version ROM Extended: 1.18.256.9643
So, as soon I'll be sure that I can roll back to the original state, I'll upgrade to the WM6 schaps version by following the vanx guide.
I found a guide for backing up and restore the TyTN by dumping the ROM just here. But I never found any guide to restore SPL, radio ROM, IPL...
I'll be happy to have any informations about that.
Thank you in advance

Don't worry about the warranty, i bricked my Hermes once (only after that i found out how to do it right ) and it was repaired with no extra costs. So i wouldn't worry to much about it.
Just go ahead and flash that thingy. Btw, the Black Satin (JJ) together with radio 1.47.00.10 works perfectly with Proximus.

Thanks for your response, I'll look about Black Satin.
Just another question, is there any incompatibility with any WM6 and Extended_Rom software provided by Proximus ?

I haven't used any software from Proximus untill now, bought my Hermes with standard WM5 and flipped in my Proximus SIM card. The software you find here on the forums do everything that you can imagine, so there is really no need for special proximus software i guess.

As far as I can tell, the IPLdoesn't change normally, but the SPL does change. Anyway no worries as you can restore your original SPL (I still have the 1.04 somewhere)
The radio rom can always be flashed back with the original duth rom you find here: http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
This rom also reflashes your IPL and SPL back.
As far as compatibility between the WM6 roms and Proximus soft goes, I don't know, but I can't imagne you need more/other soft than you find available right here.
EDIT: This is only my personal opinion, but I think I tried about al the WM6 roms and find the one from Schaps the most stable one, perhaps not the most graphicaly exciting one, but the most stable one.
Grtz

Settings Proximus
Hi, I'm also on Proximus here in Belgium. Has anyone found an Ext_rom yet from this provider? Or maybe any ideas when they will launch their wm6 version?
I haven't got the settings for proximus. Any help?
Tnx in advance

Hi,
I have one Hermes from their "Proximus Collection" so I have a Proximus Ext ROM on it. I can do a Backup of it and upload it to the xda wiki. (I'll do that this evening if I can).
I don't know if Proximus will provide an upgrade to WM6...

Thanks Genyam for your help.
Can you tell us the rom version you have ?

Genyam said:
Hi,
I have one Hermes from their "Proximus Collection" so I have a Proximus Ext ROM on it. I can do a Backup of it and upload it to the xda wiki. (I'll do that this evening if I can).
I don't know if Proximus will provide an upgrade to WM6...
Click to expand...
Click to collapse
Would that work with WM6?

I don't know if it works with WM6 but as this is only a set of CAB files, I suppose that they are compatible.
I've already created and uploaded to xda ftp a dump of my ROM.
My infos:
ROM: 1.18.256.2
Date ROM: 07/2/06
Radio: 1.03.03.10
Protocol: 32.34.7010.01H
Extended ROM: 1.18.256.9643
The CID for the Proximus Hermes: QTEK_203

OK thnx, grabbin it right now. Is it French only?

The dump that is already uploaded is for ROM, not Ext_ROM, I'll put my Ext_ROM this evening.
I suppose that it's not french only cause when I hard reset my Hermes it's in Dutch.

yeah thnx i noticed. Np, i'll grab it tonight then.

The Extended Rom is added to this wiki page: http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms
This is the first of the page

Rom newb questions about SPL / HardSPL for POLA200?

I have a brand new XDA orbit 2, which is offered with a warranty by the supplier.
I put the O2 official WM6.1 upgrade on it (RUU_Polaris_O2_UK_3.13.206.0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe) which flashed fine.
I intend to try one or more of the many great sounding WM 6.5 rom images, however, I have a few questions, mainly related to SPL/HardSPL, which although I have done a bit of searching for, have not found definitive answers for ...
Are there any differences between POLA100 and POLA200 devices (will HardSPL work fine on my XDA Orbit 2 / POLA200).
How can I restore the original SPL on the device?
Can I extract the original SPL from a) the device, b) the ROM image, c) source elsewhere?
With HardSPL installed can I reinstall the official upgrade rom with HardSPL still in place (in case of stability problems, with rom images).
Also - anything else I should be thinking about before flashing this device (note I am going deactivate copilot before flashing)?
Apologies if I missed the answers in other posts!
TIA

cix said:
Are there any differences between POLA100 and POLA200 devices (will HardSPL work fine on my XDA Orbit 2 / POLA200).
How can I restore the original SPL on the device?
Can I extract the original SPL from a) the device, b) the ROM image, c) source elsewhere?
With HardSPL installed can I reinstall the official upgrade rom with HardSPL still in place (in case of stability problems, with rom images).
TIA
Click to expand...
Click to collapse
1. yes...main difference is touch cruise...polaris 100...o2 oribit 2 polaris 200
2.yes you can...flash original spl
3. don´t think so
4. now problem...but after you flashed original rom
so try:
look on my rom thread under steps: there is all you need
http://forum.xda-developers.com/showthread.php?t=593750
but all the other rom´s here are also great: eg: pcarvalho´s...kosta´s...salvy.c.83´s and FW-eXXon´s rom´s
big thanks to all of them
edit: i saw this will HardSPL work fine on my XDA Orbit 2 / POLA200).
Are you german or...??? it´s not so important but if you are german look here for a german rom:
http://forum.xda-developers.com/showthread.php?t=605070
Have fun

Thanks for the reply... Sorry to be slow, but...
>1. yes...main difference is touch cruise...polaris 100...o2 oribit 2 polaris 200
Is that significant technically, which is what I did not say very well?
>2.yes you can...flash original spl
>3. don´t think so
How do you flash the original SPL then (I am v. newb!)? I don't have that (other than on the device itself).
>4. now problem...but after you flashed original rom
The original rom has been flashed (over) with the official update, I am not really getting the point here? Do you mean my orignal O2 uk WM 6.0 or the original referenced from your thread (RUU_Polaris_HKCSL_WWE_3.19.831.3_radio_sign_25.85.30.07_1.59.42.15_Ship)?
Thanks for the pointer to you rom thread which looks very useful (I am from UK BTW)
Thanks again

cix said:
Thanks for the reply... Sorry to be slow, but...
>1. yes...main difference is touch cruise...polaris 100...o2 oribit 2 polaris 200
Is that significant technically, which is what I did not say very well?
>2.yes you can...flash original spl
>3. don´t think so
How do you flash the original SPL then (I am v. newb!)? I don't have that (other than on the device itself).
>4. now problem...but after you flashed original rom
The original rom has been flashed (over) with the official update, I am not really getting the point here? Do you mean my orignal O2 uk WM 6.0 or the original referenced from your thread (RUU_Polaris_HKCSL_WWE_3.19.831.3_radio_sign_25.85.30.07_1.59.42.15_Ship)?
Thanks for the pointer to you rom thread which looks very useful (I am from UK BTW)
Thanks again
Click to expand...
Click to collapse
1.don´t know exactly but this is what the xda wiki says:
Polaris 100 HTC Touch Cruise P3650
Dopod P860
Polaris 200 HTC Touch Find
O2 XDA Orbit 2
link:
http://wiki.xda-developers.com/index.php?pagename=HTC_Polaris
3. after you flashed original rom->here the link of original spl
http://forum.xda-developers.com/showthread.php?t=381600
4. the 6.1 rom read my thread under steps there is also the original rom link
http://forum.xda-developers.com/showthread.php?t=593750

Many thanks for the info / links ...

Need original t-mobile german stock rom or dump. Please help!

Has anyone made a dump from the t-mobile german rom? Please share it or write me! I need it now to undo my hspl.
Maybe has anyone the original t-mobile german stock rom?

You are here since 2008?
Please look first in the xda-WIKI:
http://wiki.xda-developers.com/
Besides the stickies here, you find there every ROMs.

lynxxx said:
You are here since 2008?
Please look first in the xda-WIKI:
http://wiki.xda-developers.com/
Besides the stickies here, you find there every ROMs.
Click to expand...
Click to collapse
I didn't find a t-mobile german rom. Therefore I ask, maybe someone created a dump before flashing with hspl.

there isn´t any t-mobile germany rom.
for your warranty issues you can use original HTC roms without any problems
here you go
http://wiki.xda-developers.com/index.php?pagename=HTC_Leo/ROMs
http://rapidshare.com/files/3196364...dio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
http://www.htc.com/de/SupportDownload.aspx?p_id=297&cat=2&dl_id=863
SN:HT9B9NW00374
to disable Hardspl extract ruu**.nbh file and rename to LEOIMG.nbh
put this on your SD card then make hard reset
Before I had 3 HD2 TyTNII devices
2 had a hardware defect
on both devices was not partly filled with the original T-Mobile software
but the original HTC software with HardSPL
I still had full warranty

sorry shurup, you were right.

There is a difference in the HTC German ROM and the German T-Mobile shipped ROM. I bought my HD2 here in Germany and I flashed it with the 1.66 WWE ROM and the only difference I have found is the T-Mobile splash screen during start up. As far as I can tell, all the same programs are on the ROM.

tidefever said:
There is a difference in the HTC German ROM and the German T-Mobile shipped ROM. I bought my HD2 here in Germany and I flashed it with the 1.66 WWE ROM and the only difference I have found is the T-Mobile splash screen during start up. As far as I can tell, all the same programs are on the ROM.
Click to expand...
Click to collapse
Is it possible to change a splash screen after update htc rom to t-mobile? Has anyone this splash screen?

tidefever said:
There is a difference in the HTC German ROM and the German T-Mobile shipped ROM. I bought my HD2 here in Germany and I flashed it with the 1.66 WWE ROM and the only difference I have found is the T-Mobile splash screen during start up. As far as I can tell, all the same programs are on the ROM.
Click to expand...
Click to collapse
Is it possible to flash this 1.66 WWE ROM on t-mobile rom without hspl? This is important for the warranty. In this case I can claim that the phone has a legal update.

Gurgulio said:
to disable Hardspl extract ruu**.nbh file and rename to LEOIMG.nbh
Click to expand...
Click to collapse
How to extract the .nbh file?

you must have backed up your stock rom before putting installing HSPL....if you use some orig rom which is not compatible with your rom in your hd2...you will have an error....i have same problem before...good thing i found the right rom for my hd2.....

BladeKnight said:
you must have backed up your stock rom before putting installing HSPL....if you use some orig rom which is not compatible with your rom in your hd2...you will have an error....i have same problem before...good thing i found the right rom for my hd2.....
Click to expand...
Click to collapse
I have not found my original stock rom. Maybe someone help me?

"002802" not allow.....this will be the error msg that will appear in your hd2, when flashing thru sd card....i hope i can help you....

http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html
try here....

or here http://forum.xda-developers.com/showpost.php?p=6125267&postcount=1
[GER] T-Mob 1.43.111.2 Shipped Rom
http://rapidshare.com/files/3733966...dio_Signed_15.26.50.07U_2.04.50.22_2_Ship.exe