How to restore extended ROM backed up with aWizard? - 8125, K-JAM, P4300, MDA Vario General

I used aWizard to backup the ROM of my Wizard Model 100 (Vodafone VPA compact II). After playing around with another ROM, I now want to go back to the original Vodafone ROM. Using aWizard again, I was able to restore the main ROM into the device, but it seems like it did not restore the extended ROM. The main ROM is working normally, but the Vodafone customizations didn't start after hard reset. I unlocked the extended ROM and can now see that it contains no files. Unfortunately, it is also write protected, so I cannot copy the extended ROM files manually.
How can I get the extended ROM files back into the device? I know that I could simply copy the files somewhere else and run it manually, but I'd like to restore the original state.
From my research, it seems to be a specific problem about the VPA compact II that even if you can unlock (i.e. "make visible") the extended ROM, it will still remain write protected...

Just think.
Maybe you should firstly refresh your rom with an older version like 1.5.x.x or sth. that would make the ext-rom visable & rewritable. than after you copy all that .cab files as you need, use aWizard to just upload the newer rom (at this case should be 2.17.x.x).
Never try this, if succeed pls let me know... :wink:

yeah this works this is what i have done to change the splash screen several times...on several units as well.....

Related

Unlocking extended ROM

Really sorry - can someone point me in the direction of a tool that unlocks the extended ROM for a Wizard? I'ves searched but I can't find Am I being blind?
I need to free up some space and want to get rid of those imate .tsk files but need to unlock the ROM first.
Thanks
Mat
Try this one
Download this
http://www.ghisler.com/pocketpc.htm
Then type (after install)
“\Extended_Rom\”
and walla
Didi
...
Hi,
can somebody explain how i can delete the files in extended rom ? i tried with TC and the files seemed to be deleted, but after the hardreset they were still there.....I want to get rid of them and install some other programms too.
Thanks and regards
Joachim
...
Hi,
can somebody explain how i can delete the files in extended rom ? i tried with TC and the files seemed to be deleted, but after the hardreset they were still there.....I want to get rid of them and install some other programms too.
Thanks and regards
Joachim
Ok Total commander gives you access to the extended rom using the method just posted above.
But if you want to actually have the extended rom showing all time, then you need this...
http://forum.xda-developers.com/viewtopic.php?t=33680&highlight=extended+rom
The extended rom unlocker will give the actual extended rom as space deginated extended_rom2 and its about 9.85mb size or something with between about 350kb and 2.5mb of .cab files in it depending on whether its a Qtek (Which has the least amount of files), I-mate, o2 or T-Mobile, these last two probably (along with Orange) will have the most 'junk in them.
Once you have ran the exteneded rom unlocker and soft reset your device it will be accesible through file explorer you won't need TC.
You can then go in and delete (be careful to make sure what everything does first) its your own responsibility, and remove what you don't need.
For example on the I-mate Extended Rom you cane remove Backgammon, Skype and the anti virus prog. There wasn't much on the Qtek Rom I just put on mine just clearvue and soemthing else inconsequential, there was no skype or antivirus, but I believe some Qtek roms might have this.
T-Mobile is abother story, there is a shedload of crap in the extended rom, ranging from a today screen toolbar to small progs, there is list knocking about of what each file does. When I changed from T-Mob to I-mate and then Qtek I just transferred the T-Mobile GPRS settings and the GPRS disconnect button .cab and put them in the exteneded Rom myself and let it run.
Also on I-mate Rom there are carrier settings that you can delete which won't apply to you, basically lots fo countries phone settings, like o2 UK, T-Mobile Spain etc etc, depending on where you are in the world.
You can't delete the I-mate .tsk todayscreens as far as I know, they are not in the ExtRom. The Qtek ExtROm doesn't have the extra .tsk's just default and the Guava Bubbles one.
If anyone wants the T-Mobile GPRS .cab and GPRS disconnect button .cab I can send it through msn or email.
that doesn't work either. I treid with the unlocker and deleted the files with TC. If i check the content no files are there, but when i try to copy other files to the ext. Rom it says that the volume is write protected. I softreseted several times also.
Any hint on that ? How have all the others deleted the files in extended rom ?
Regards
Joachim
batman08 said:
that doesn't work either. I treid with the unlocker and deleted the files with TC. If i check the content no files are there, but when i try to copy other files to the ext. Rom it says that the volume is write protected. I softreseted several times also.
Any hint on that ? How have all the others deleted the files in extended rom ?
Regards
Joachim
Click to expand...
Click to collapse
Might not work for you but it worked for me and a load of others. Once the extended rom is visible you can delete files easily, you don't need TC like I said. Its easier to put additional cabs into my documents sync them across and just run them.
Yeah, that's a pitty.... I have the Vodafone VPA Compact II, which is the Wizard 100 afaik.
Someone around here has the same model and succeeded in removing the cabs from the extended rom ?

Unlock Extended ROM

I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank
fmcgirt said:
I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank
Click to expand...
Click to collapse
It can, just try again anad again, i did it on my 4th attemps
Cheers!
Thanks for the response but I haven't had any success after several tries. I tried installing the Wizard unlock cab file and afterwards with Total Commander, I can reset the Read Only bit on all the files and copy the files to my SD card. However, I am unable to delete any files. They appear to be deleted but come back after a soft reset. I would like to especially get rid of all the operator settings files. The rest of the stuff like Skype, Anti Virus and Backgammon I can get rid of using Settings>Remove Programs.
Frank
Isn't "ROM" short for "read only memory"?
hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?
Total commander does not work with the jamin in my case anyway.
Tried several time with no results.
shahzadkhan15nov said:
hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?
Click to expand...
Click to collapse
hi,
unlocker for wizard is not mine...
buzz
...well, if anyone can give me a dump of Prophet's bootloader + clean registry export, i can take a look at it..
buzz
Buzz,
Thanks for the great offer.
I can give you the clean reg but how can i get you the first part, bootloader thingie?
Regards
I have used the Wizard Extended ROM unlock program to unlock the ROM on my Prophet. I now have a copy of the Extended ROM on my SD Card. I'm not concerned about erasing the Extended ROM files, I just don't wan them installed, so I did a Hard Reset and just when it says that it will start installing the additional prorams in 3 seconds, I did a soft reset.
OK, now I have a Prophet without extended ROM. I can now install the stuff that I want.
Most of the cab files I've figured out, Does anyone know what the following extended ROM cabs do? This is from the latest Imate Jamin ROM.
Default_CAAVPPC_IMEI_2.6.77_range.CAB
Default_Imate_PPC_SA_V5.5.03.cab
Default_MP_Shortcut_MMS1_JAVA_VOICE_CV_051213.CAB
Default_PP_TSK.CAB
Default_PP_UAString.CAB
Default_PT_Signed_IconDll.sa.CAB
Default_PT_Signed_Patch_SD.sa.CAB
Thanks heaps,
Matterhorn
Default_CAAVPPC_IMEI_2.6.77_range.CAB is the anti-virus app which used to play havoc in slowing down the KJAM. Maybe this version is better but I uninstalled it using Remove Programs. About the rest I am not sure. At least you don't have Skype, backgammon and the Operator Settings files so I expect you will gain a fair amount.
Frank
you can use wince cab manager to see the content of the cab file.
Still nothing? Guess I will go the way of Matterhorn when I need to do a hard reset. Several others have not installed the Extended ROM at all and have reported significant speedup in the JAMin.
Frank
That would be me. I haven't installed one thing off the extended rom and my speed is really pretty good. You can see a video review at the link below to compare the m600 and the jamin (with no extended rom). Keep in mind I don't use mms, skype, antivirus anyway....so no big deal to leave off the ext rom. I also use adobe and don't need the clearview .pdf. Hope the video helps
http://www.howardforums.com/showthread.php?t=849592
Thanks, Mike. I don't use the stuff either except MMS once in a while but can just as easily use email for that. I presume Voice Dial is in the Extended Rom but rather have MS VC anyway and things like Connection Manager, Messaging, etc., that I want are not in the Extended ROM so I should be fine.
Now to find time to do a hard reset and re-install my apps.
Frank
Everyone has diffrent issues, I was able to delete the files from there (verified by refreshing the dir, and I recieved no read only error) but I was unable to write files to it, which I thought was very strange, I am using APA_ext_rom_unlock.exe and it does NOT give me the success msg it acts like it hasnt even ran. I updated my ROM to teh test one that was floating auround 2.8.7 whatever, and I realized too late that aWizard has no way to reflash teh extended ROM so I am without all my Cingular apps and I have all the 2.8.7 Extended rom stuff with the 1.8 Cingular OS ROM which I reverted back to. Any suggestions how I can replace my extended ROM ?
any luck so far?
Hi guys,
Are we getting any hope/luck to unlock Ext ROM for JAMin/Prophet?
I don't know how you guys are doing it. I have tried several times to delete items in my extended rom using total commander, at least 10 times and the result is the same. After the hard reset all that was deleted was re-installed after the reset.
I have contacted TC a while ago, and have not heard anything, maybe they are working on it.
Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:
mikewchandler said:
Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:
Click to expand...
Click to collapse
No, I think the end result would be pretty much the same. For me I would like an Extended ROM for the JAMin that includes exacty what I want installed - no Backgammon, AntiVirus, Smart Dialing, Skype and a single Operator Settings file for TMO USA. Then when I hard reset I don't have to mess with anything else, just let it go. I had my KJAM setup that way and I would like the JAMin to be the same. I would also be as close to an OEM install as I can get (without the junk) so I don't have to worry about proper default settings not being there because of some file I didn't install or installed in the wrong order. Having said all this and thinking about it more I am sure you would get to the same point doing your procedure and then installing the required .cab files in the proper order.
Now I have a question:
Wonder what would happen if I did a hard reset, then did the soft reset to stop the Ext ROM install, installed the required .cab files in order, soft reset and then restored from a Sprite BU file. Wonder would I be restoring any files that could cause problems due to an imcomplete ROM install? I guess I will have to try that first since I do hate to re-install a bunch of apps and especially have to re-enter all the reg codes.
Frank

Shipped ROM / Extended ROM differences

maybe this is a basic question.. sorry for my ignorance...
I am asking this because I have tried almost every extended ROM, but i.e. when I installed Jasjar extended rom, after hard reset, I didn't notice/found any difference, couldn't find an imate logo, for example.
So maybe I an not installing extended ROM correctly, and installing shipped ROM would be the solution. is this possible? , .. maybe it is the same thing..
The Shipping ROM updates 3 things:
1. OS ROM
2. Radio
3. Extended
The Extended ROM just updates , the extended rom
The Splash Screen (the logo on reset) is stored in the OS ROM
To detail, You could change you Splash Screen with any sevice Provider, Just install the .cab which you could find in this forum(Skin related sub-forums).
It is stored in the upper part of the BoodLoader.. Could not be loacted in you windows but with a special tool.
thanks
I've been asking this because until now I thought that in order to try a ROM -i.e Jasjar, O2, etc - I should just copy the extended rom files of the selected ROM in Univesal's extended ROM folder, then hard reset and you are done.
But I feel like doing this you are just installing a few mods -not sure -.
So a good conclusion would be.. if I want to try Jasjar ROM, I must install Jasjar Shipped ROM?? :?
jmcl said:
thanks
I've been asking this because until now I thought that in order to try a ROM -i.e Jasjar, O2, etc - I should just copy the extended rom files of the selected ROM in Univesal's extended ROM folder, then hard reset and you are done.
But I feel like doing this you are just installing a few mods -not sure -.
So a good conclusion would be.. if I want to try Jasjar ROM, I must install Jasjar Shipped ROM?? :?
Click to expand...
Click to collapse
Yes as I stated above, the Shipping ROM versions include RADIO, EXTROM, OS update.
So you can install JASJAR OS but have O2 extended ROM

[README] Wizard - Backup Restore and Upgrade Rom! 17/03/2006

Hi, I've just recently got my self a T-Mobile MDA Vario. This is also known as Qtek 9100, Imate K-JAM, O2 XDA Mini S. The first thing I did was to find out whether there is a newer rom to upgrade to and I landed on this forum. The wiki was informative but still lacking a lot of information which only resides on this forum. After digging the forum for the whole day, here is my summary.
The first thing you do when get your phone is to SIM unlock and CID unlock your phone. SIM unlock allows you to use different service provider on your phone. CID unlock allows you to upgrade your OS rom, radio rom and extended rom. The OS rom is where the Windows Mobile OS resides at, radio rom is where it controls your GSM or CDMA radio protocol. The extended rom is where your service provider does their own customization, like adding their own software, logos etc. You can customize your own extended rom too once its unlock, like adding and removing application.
To SIM unlock and CID unlock your phone, currently I only know of 2 free programs that can do that for you. You only need to do this once since the unlocking info is stored in a different part of the memory then the roms. I must stress that CID unlock will *VOID* your warranty with your service provider.
1) The first one is lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b. This utility can SIM unlock and CID unlock. It also allows you to lock it back. Thank you very much machinagod! You can get it here http://forum.xda-developers.com/viewtopic.php?t=33796
If you can follow intructions its a piece of cake.
2) The second util is aWizard ROM Utils. This ultility can *ONLY* CID unlock your phone and *NOT* SIM unlock. However this tool also allows you to change the splash logo easily. It also can backup and restore your OS rom, radio rom and extended rom independently of each other. Thanks ahlok_hk! Get this here
http://forum.xda-developers.com/viewtopic.php?t=37386
After you are done with the unlocking, it is advisable to backup your rom before you do anything upgrades. This is because most of the people here are on contract with their service provider. If your phone breaks and wants to send it for service, it is better to restore it to the original roms it came with otherwise they might say you have void your warranty by flashing third party roms and then you are stuffed.
I have found a few threads that deal with backing up the roms.
1) This thread explains how you can use romupdate.exe and ntrw.exe to dump raw data from the roms to your SD card. This will *WIPE* out all existing data on the SD card so becarefull. You can keep this SD card safe somewhere until you want to restore but then you won't be able to use it. You can use ntrw.exe to copy the raw binary from the SD into a file. You can then keep this file somewhere safe and then format your SD and carry on using the SD as before. To restore just use ntrw.exe to write from the restore file to the SD card and follow the instructions to restore. Thanks arnoldl!
http://forum.xda-developers.com/viewtopic.php?t=32866
2) This method is pretty much the same as above except that it uses different programs. This uses a terminal program (terraterm) to get into the phone and use "r2sd" to dump Rom to SD. It also uses psdread and psdwrite to read and write raw data to and from the SD. This also tells you how to be able to reformat your SD after you use it to backup. Thanks Genesis3! http://forum.xda-developers.com/viewtopic.php?t=43399
3) You can use the aWizard program to backup your roms. Follow the intructions.
4) Button is kind enough to write a program to backup all your IPL/SPL, OS rom, Radio rom and Extended rom. This program is easy to use. You will still need a SD card for this.
Read this thread for more info:
http://forum.xda-developers.com/viewtopic.php?t=40347
You can grab the tool from:
http://buttonwashere.narod.ru/
I think this method will backup your OS rom, Radio rom and Extended rom. I'm not sure whether it backs up your IPL and SPL. There is a bug in SPL 1.06(bootloader) *thanks Button for the hint* it will give you an error if you try to restore from the SD using the ntrw.exe/psdwrite method. The workaround is to install an older rom with SPL 1.01 such as the first Qtek Prodigy rom. Then you can restore your rom. Using the method where you backup your rom to SD and keep it there until restore is not affected. I recommend getting a 128MB SD since its relatively cheap. Its worth buying one just for rom backup.
Now that you have unlock and backup your roms. You can start flashing new roms to try out!
ftp://ftp.xda-developers.com/Wizard
You can find many different roms under the Roms directory. This roms usually are all in one packages from the OEM such as Qtek, I-mate, O2, T-Mobile etc. The ODM is obviously HTC. If you want localization for your language just choose a rom your language eg:- RUU_Prodigy_2080702_102_11310_QTEK_FRA_Test.exe for french.
These all in one packages comes as an executable which includes the flash program and the OS rom, Radio rom and Extended rom. Just click and install. To get your settings for your network GPRS settings, you might be able to find a *.cab file which has the settings in your original extended rom and copy over to the new extended rom. This only work for 1.x roms, read below for more info. You can get UK network operator settings here
http://www.htcclub.net/en/settings.php
It seems that the most popular roms are from Qtek and I-mate. This RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe seems to be recommended by most. This rom is the 1.x series. There is a newer 2.x series of roms just recently released which includes the AKU2. From what I understand AKU2 is like a service patch for windows. It includes DIRECT PUSH email functionality (similar to RIM's Blackberry) and AD2P which is stereo bluetooth support.
At the moment non of the final released AKU2 roms have AD2P. If you need it, the Qtek 2.x beta testing rom does include this functionality. You can find this on the ftp. Another downside to this newer roms is that the Extended rom seems to be locked and you won't be able to access it. No one has yet found a way to crack it. These newer AKU2 roms have fixed the wifi bug which showed when using WiFIFoFum wifi scanning program.
Linux
I just had a chat with the linux developers for HTC devices on irc. It seems the wizard running with the OMAP750 processor does not have enough documentation and is not well supported in the kernel yet. But the development on the HTC Universal seems to be going well. As for syncing with windows mobile 5 and linux, the synce project currently do not support WM5 yet, they just started a new mailing list for it. If you have any experience in reverse engineering please help. The only solution now for me is to install windows xp on vmware and sync from there. Then you can export your outlook as a file to be imported into your favourite Linux app. Linux cannot read the mini SD in your device, so you will need a card reader to read and write files to it.
This is what I've found out so far after spending the whole day digging the forum. I shall add them to the wiki so other ppl who don't have that much time to spare can benifit from it.
I have a few unanswered questions. What is IPL? What is SPL? I sort know its something to do with the bootloader. Does using "r2sd" backup my IPL and SPL? It not how do I backup my IPL and SPL? If I upgrade to the 2.x series roms, will I be able to restore back to the 1.x series? From what I've read, you can restore from 2.x back to 1.x but the IPL and SPL will still be 2.x, is that correct? Thanks!
Hope this helps someone. Those threads above should really be made sticky. The search never turn up what I need. I had to slow dig my way thru.
regards,
vaxen
I was considering starting a 8125 Standardization Project, much like the SX-66 Standardisation Project. I'm am just not sure I have the time.
Nice walk through BTW. You sum it up rather well :wink:
I wish you posted this 2 days ago, then I wouldn't have had to do all that digging to figure it out. It is easy once you see the BIG picture though eh?
Later; Lew
great overview. Thanks a lot !!
Really great overview! Posted the URL to my Expert Blog at http://www.pocketpcmag.com/blogs/index.php?blog=3&title=great_tips_for_htc_wizard_users&more=1 for even more exposure.
will a 512mb minisd be enough to back up everything before flashing to a new rom?
Thank you
Excellent timing just started the process myself.
oo3: Yes, 512MB is more than enough for backing up your rom. If you use a 512MB to backup your rom and write the raw data to a file. When you restore, you need a 512MB card to write the raw data back to the card. I personally bought a 128MB card just for backing up the rom. It only cost me £10 to buy it online. Its worth the investment.
good overview.
Might be worth to put it on the wiki
One flaw: ExtROm of all ROMs 1.6.x and above are locked with no real solution yet.
For the 1.6.x roms you could try to fiddle with versions in order to (one time right) make the ExtROm you want.
For the 2.x ROMs even this is not possble until now.
The aWizard tools are said NOT to be working on the 2.16.x (final aku2) ROMs they do work on the 2.8.x (beta aku2) ROM from QTek.
At this moment buzz_lightyear is fiddling with my spl to try to get the EXTRom unlocked.
The SD backup/restore process works really well btw.... I just tried a restore of the original Cingular Rom on another demo 8125 and it turned it back into a pristine stock device.... Cingular will never know we "had our way" with so many of their demos now :twisted:
Backup Restore and Upgrade Rom!
What a summary. Thank you for your effort.
Upgrade question
I've just backed up the existing ROM on my new O2 Mini S, thanks to this wonderful post. Before I proceed to an upgrade, could someone please tell me if I should leave the SIM card inside the wizard, remove it, or it just doesn't matter during the upgrade? I'm planning to go for the O2 AKU2 rom. Thanks.
Blokade
It just doesn't matter during the upgrade
Um. The OMAP can run linux. Linux is a supported OS for the OMAP. The problem is the rest of the hardware (lcd, etc).
i SO want linux on the wizard. 4x6 font and console :d
ftp a no go
can someone please help as i can't get into the ftp via the link provided
Re: ftp a no go
This overview should updated : the latest lockwiz 3a can also do the latest Tmobile-NL ROM with IPL/SPL 2.21 !!
http://forum.xda-developers.com/viewtopic.php?t=50768&postdays=0&postorder=asc&start=0
A more detailed instruction to unlock can also be found at http://www.mdahacks.com/item/2006/6/7/unlock-your-htc-wizard-mda-8125-phone-using-lokiwiz
Does this also work for the CIngular 8525 or Dopod 838 Pro?
Does this upgrade also work for the Cingular 8525 also known in South Asia as the Dopod 838pro?
No. Look inside of the Hermes section for that device.
--eluth.
Great overview, I would hope that future visitors or registered users read through it and save themselves and others a lot of headaches. On that note any reason this isn't getting stickied?
@The SOundshark
If your running peerguardian you might want to dissable it, or if your running any other type of firewall. For the life of me I can't configure peerguardian to allow FTP access, so try that and hope it helps.

Help Please - renamed registry folder & can't change it back!

What a numpty!
I was trying to get HTC Home Weather working thru T-Mobile UK using v1.5HTCHomeproxy0409.cab (without success), so went into the registry using Total Commander to check the Proxy settings.
Unfortunately I got as far as \\\Registry\HKLM and was trying to double click the "Software" folder but instead it went into edit folder name mode and whilst distracted by the wife managed to change the folder name to "n"
Whatever I try, I can't rename it "Software". I've tried creating a new "Software" folder and copying the files across, but a few won't copy:
/Apps/Shared/ "\Windows\mscoree.dll" and
/Apps/Shared/ "\Windows\Intellipad.dll" and
plus some .NET Compact Framework files in /Microsoft/ folder - but I'm guessing these are something the prev user had and wont affect the normal functions / programmes I will use
so... is there any way I can put the files I moved from
\\\Registry\HKLM\Software back, do I need to etc ????
Would appreciate a bit of advice from someone less accident prone!!!!
Its a (recently bought off eBay) , ex T Mob (UK I think) unbranded with HTC home etc. Can't work out how to see what version of HTCHome was on, but guess I've written over it with the proxy.cab now - the icons have changes and have lost today screen battery indicator, but that's a problem for another day!
Not sure what the ROM is, if its an original or cooked (OS ID looks normal to me, WM5?), but ExtROM looks like its been hacked by its name - dferriera WM5SE
G4 Wizard
ipl 2.21.0001
spl 2.21.0lip
gsm (radio?) 02.71.11
os 2.26.10.2 WWE
Well, if it wont change back, you can always hard reset or reflash to a new ROM...and if you do the later, all of the prerequisites have been done for you, you have HardSPL allplied already, and the correct radio ROM version for most of the ROMs, so you can flash away!
Thanks Ashasaur.
As you've probably noted from my profile and foolish behaviour, I'm new to this, does anyone mind just explaining the above comments on the ROM flash for me please?
-all of the prerequisites (?) have been done for you
-you have HardSPL (?) applied already: Is this related to the Server Proxy I've been trying to patch to HTC home for the weather fix?
-and the correct radio ROM version for most of the ROMs: does that mean I need to be careful I pick a ROM to match my radio version somehow?
If I can't find a way to rename the registry file, I'll have to go for a hard reboot, ROM flashing will be my next project once I feel I've done enough reading to understand what I'm doing and what not to do!
Thanks.
In order:
1-Prerequisites)-You have got HardSPL flashed succesfully to your device which leads to;
2-HardSPL)-Since you have a G4 device, in order to flash a non-carrier ROM you have to have HardSPL applied to your device, and you can tell that yours has been done by your IPL and SPL. Your IPL or 2.21.0001 indicates that you have a G4 Wizard, and your SPL or 2.21.Olip means that you have HardSPL applied already, otherwise you would have had to do it in order to be able to flash any ROMs...which leads to;
3-Radio)-What I mean by correct radio for most of the ROMs is that 2.71.11 is regarded as one of the more stable radio ROMs out there, and together with version 2.19.X, they are the preferred versions, though any version will work with any ROM, some work better than others.
Hope that helps!
Yes it does, thanks - especially now it has prompted me to read the wiki on hardSPL.
So maybe flashing a new ROM is not too far away...
Does the ROM contain the Windows operating system, in which case can I upgrade to WM6 / 6.1 (version currently says WM5) on my device, will I find a selection with info on what's in them on the downloads pages? (can't get access right now for some reason)
Cheers
I just did this today with my Touch Pro, it's alarmingly easy to break your device like this.
I think I have it fixed ... after I made the mistaken renaming, the device had locked up (or grown very slow) so I soft reset it. That rebuilt a large portion of the Software folder. After that, I copied the remaining keys in the renamed folder to clipboard and overwrote whatever was in the new Software folder.
Phone seems to be back to normal, but I'll be on the lookout for anything that didn't quite work. If that's the case I may have to hard reset.
@burnsy, yes, most of the download pages contain what the ROMs have in them, but I would look at my review thread in the Wizard Mobile 6 section...its called ROM Features......such such such, its got a list and ratings of the ROMs that you may find interesting.
Nice one ashasaur, sounds like just what I want. Should keep me off he streets...
Dr G, seems you're getting on a bit better than I am - my device won't let me copy all the files into the new folder. Noticed that I can receive but no longer send email, even after deleting and reinstalling my account, but that could equally have been caused by the htc home proxy files I was playing with!
I feel a hard reset coming on...

Categories

Resources