Database Users

PPC 2003 and mkrom

Any brave soul try using mkrom in conjucntion with the 2003 ROM? I think I might give it a shot here in a bit but wanted to know if anybody had tried it yet...

I've managed to build a 2003 ROM. It's extremely tricky though. I'm working on customizing a ROM similar to the XDA Developers SER - as soon as I get some free time
I'd like to acknowledge all the help given to me by Developer Itsme in this endeavor.
Let me know any suggestions you may have for the new ROM.

sheran_g,
i didn't know u could use mkrom with 2003 rom image. can u please post how u did it? i created a special version based on SE 1.1 rom but would like to put the same programs into the new rom. any help is appreciated.
thanks
alex

sheran_g said:
I've managed to build a 2003 ROM. It's extremely tricky though. I'm working on customizing a ROM similar to the XDA Developers SER - as soon as I get some free time
I'd like to acknowledge all the help given to me by Developer Itsme in this endeavor.
Let me know any suggestions you may have for the new ROM.
Click to expand...
Click to collapse
What's tricky about it...?

The modified registry file you make does not get picked up at the device startup. You need to manually inject the memory address of the modified registry file into the ROM in order for it to get picked up.

my latest romtools can be found at romtools
now it calls dumprom to find and fix the filedata offsets.
I think they should now build 2003 roms.

sheran_g,
can u post the steps that u take to buid it? i'm trying right now and its not working. i'm having little problems. can u post ur default.reg and initobj.txt? any other help is apreciated.
thanks
alex

Ok. Here they are in a nutshell:
Get the latest romtools.
Make the following dirs: romfiles, cfg, tmp, out, files, files1, files2
Split the ROM into Bootloader, bootimage, OS image, xipchain into the 'cfg' dir.
Dump the files in the OS image into a 'romfiles' dir.
Get the default registry file, initobj & initdb files into your 'cfg' dir.
Make changes to your default.reg and initobj.txt
Place any files you want loaded in the ROM into the 'files' dir.
Run 'mkrom.sh'
You should then have your new ROM. I'm sorry if it's extremely brief; you'll have to make do with this and the README file in the romtools archive file for now. You'll find my default.reg and initobj.txt files on my site: www.zensay.com/qtek/mkrom

sheran_g,
Have you created a decent working custom WM2003 ROM?
If so what Apps have you added?
How much ROM space does it use?

I've not added any apps to my ROM. I have only added a carrier logo file and made some changes to the registry. So I cannot comment on ROM space yet. The ROM works fine.

sheran_g,
what command did u use to extract rom files? did u do it under windows or unix?
I'm having problems trying to dump the rom image. I don't know if its too much to ask, but can u zip ur directory and post it somewhere so i can download it? or if u can post commands that u ran to dump the 2003 rom?
thanks
alex

Hi,
could you include "O2 home zune" to the 2003 image, like in the 2002 3.19 GER. Its for Germany interested only!
AR :?:

home zone depends on specific 3.19 rilgsm features. which are not in 4.*

okay, used dumprom -4 -d files -q nk.nbf and extracted all files. Got could not find pointer for ofs 00000000 ERROR but all the files seem to be there. Trying to figure this out. Saw the above abreviated directions but am fumbling around. Anyone have concise directions?
Val

Anyone? Just give me a good hint then please.

Hi all!
When i overwrite the rilgsm.dll file in the t-mobile 4.0.10 image with the rilgsm.dll from the O2 GER 3.19 image, i could use the "O2 home zone" option with the hz.exe in Starup directory? rilgsm.dll from german image hes 'at+creg=2' string in it. probably the RIL_GetCellTowerInfo call is now implemented. When it can work, how could i write the german rilgsm.dll to the image? I haven't linux, could somebody cook the image for me?
here is the germen rilgsm.dll and the hz.exe for the "home zone" funktion! http://www.nokiaprog.de/XDA/home_zone.zip
THX
PS: Sorry, my english! ;-)
AR

the homezone enabled rilgsm.dll depends on other dll's and exe's.
probably ril.dll, stk.exe, cell*.dll and maybe more, I have not tried
replacing all.
you don't need to build a new rom in order to experiment with this, you
can just copy the desired files to \windows, to override the rom versions.

And I don't think it works with the RIL_GetCellTowerInfo call,
but adds some notification events.
to change the CREG setting you need to call RIL_DevSpecific with parameter 25 ( to turn it on ) or 26 ( to turn it off )
even though that does not seem to be how hz.exe does it.

Hi,
I opened the image file in the Hex editor and renamed the file there rilgsm.dll. Then I flashed the image, which was phone probably deactivated, because rilgsm.dll was missing. Then I copied over ActiveSync the German rilgsm.dll into the Windows directory, XDA reset and he not accept the file. I assume because the file was not in the EPROM memory! Therefore I wanted to have rilgsm.dll first times in the image!
AR

XDA developer Itsme said:
my latest romtools can be found at romtools
now it calls dumprom to find and fix the filedata offsets.
I think they should now build 2003 roms.
Click to expand...
Click to collapse
Is there any other way i can access this site or I can download this files, the sites are block here in my country, Please Help
Ronnie

XDA-developers ROMkitchen: cook your own ROMs

Announcing: ROMkitchen
Special Edition ROMs are soooo yesterday.... We're proud to unveil our largest project yet: ROMkitchen. Now you too can modify your ROM to contain precisely what you need. Create your personal ROM, based on the ROM you like.
Wanna see: Have a look at our showroom kitchen to see what we mean. As you can see the showroom kitchen shows the PPC2002 based 3.17.03 ROM released by O2, as well as the 4.00.05 Microsoft WM2003 test ROM. Neither of these ROMs is really present though: you need to download the scripts, include your own ROM images, and run the scripts on your own unix machine. But once you do, you and your friends can create ROMs to your heart's content.
Why didn't we just include these files and make it all work? Because we're not licensed to distribute these ROMs, that's why.
So now what?
Play around to see if you like it.
download all the files visible when logging in using FTP to xda-developers.com username 'kitchen', password 'kitchen'.
Put them on your own unix machine, which should be capable of executing php scripts, and which should have a 'little' memory, disk and processing power left over. (We're afraid ROMkitchen wasn't built with resource-efficiency in mind.)
Add your own ROM files, see the readme files in the "data/00[...]/_/cfg" directories for details.
Notes:
If you set up your ROMkitchen, make sure you only use it for yourself, and with ROMs you legally own. We're not responsible for abuses.
If you use an ftp-client which can ignore files which are newer on your side, you can regularly check for updates and always have the newest kitchen.
ROMkitchen does not yet support outputting self-extracting binaries a-la Jeff's exe. We're working on that.
ROMkitchen currently supports English language ROMs only. We're working on this too.
The welcome exe is back in ROMs made with it: a little too much hassle to make our own. So you'll have to go through the silly tutorial every cold-boot.
XDAunlock is missing still. (It will be incorporated, but most people will be making 4.00.05 ROMs, and it doesn't work on that anyway...)
How does it work?
The ROMkitchen consists of a number of php scripts that present the form with all the options to choose from, and which copy files ready for our 'mkrom' utility to process. If you take a look you can see the raw structure of the data that is presented and inserted into the ROM. We'll find some time soon to explain, but you can already learn quite a bit if you look at the files and directories carefully.

xda-developers u are AWESOME
I'm going to try it as soon as i get home tonight. So all that is needed at first is a 2003 or 2002 image file?
thanks
alex

This looks awesome
Is it possible to run this program on Cygwin ? I have configuered the Cygwin download to include Bash and Perl but can't find a reference to dd. I confess that although I have a reasonable amount of programming experience I have never used Unix before so don't even know how to invoke the scripts so any help would be much appreciated.
Richard

just uploaded everything to my unix box and tried to run setup.sh from 4.00.05 directory. i also uploaded bootloader.nb0 and rom.nb1 files to the cfg directory. when i run ./setup.sh this is what i get:
[[email protected] _]# ./setup.sh
Usage: splitrom <romimage(s)> [options]
-wx xipchain where to write xipchain
-wo osrom where to write output image
-wb bitmap where to write bitmap
-wl bootloader where to write bootloader
-rl bootloader which bootloader to use for NBF
-n nbfinfotext what NBF header to use [ex: PW10A1-ENG-3.16-007]
-ri nbfinfofile or where to read NBF header info from
-wi nbfinfofile where to save NBF header info
-rx xipchain where to get xipchain from
-rb bitmap where to get bitmap from
-rm [email protected] insert new romsection.
-ob offset where to find the bootup image
-oe offset the end of the desired os image ( default: 0x81f00000 )
-t NBF | B000FF | NB? | IMG type of result image (default is NB1)
also when i tried to convert the default.fdf file to default.reg i get error saying "unknown fdf file signature" and it creates a 0 byte default.reg file.
any help is appreciated. i know i'm asking too many questions, but same happened with ur mkrom tools and once i got answers from u i was able to build roms without any problems.
thanks
alex

Hold on a tick, if you guys added one more feature it would go nova, however. Some features I would like to see is the ability to mix drinks, roll joints, cook dinner, and cure premature baldness/cancer.
It would also be nice if you could arrange for the program to be delivered to my house by the drunken, naked Chinese twins, Fok u and Fok me.
You guys are the bomb. Keep up the great work!
-

# Put them on your own unix machine, which should be capable of executing php scripts, ...
Click to expand...
Click to collapse
this implies that you should also have setup a webserver, for running the php scripts.
you will have to change the 'splitrom' commandline in setup.sh depending on what source file you have.
it is not a configure all automatically script, just a guide, to what sort of is supposed to happen for setup.

Holy Cow, you guys are amazing....
This is just a short message to say I'm fighting with it as we speak. My friend's box does have PHP, this is good. I've already found that it needs two subdirs under its root ('download' and 'workspace') to be world-writeable. Took me a while to figure that one out. Haven't got it running yet though, this ROM setup.sh thing is far less than intuitive. But I have the two ROMs which have all the other mumbo-jumbo done: 3.17.03 and 4.00.05, and I will get this to run, if it's the last thing I do.
Jeff (Just back from the U.S., up since 4 am, severe jetlag)

Jeff Summers said:
I've already found that it needs two subdirs under its root ('download' and 'workspace') to be world-writeable.
Click to expand...
Click to collapse
Whoops... I guess you're right, that should have been documented. The things you take for granted sometimes...
Thanks, and good luck...

Thanks
hey, you are doing a great job guys, keep it up.
welcome back Jeff Summers.
Othman

OK, here's the status:
I'm close, really close. It wouldn't detect my OS, the bash on the system I'm on is in /usr/local/bin instead of /bin and now it's complaining about a missing perl file. I'm working on it though...

probably you are missing http://search.cpan.org/author/GBARR/Scalar-List-Utils-1.11/
which is included with perl 5.8, but not with perl 5.6.*
if you don't have root access to you box, you can also install ( see the README for build instructions ) list-utils in your home directory, by editing the generated Makefile, and changing 'PREFIX=$(HOME)', and then adding
Code:
export PERL5LIB=$HOME/lib/perl5/site_perl/5.6.*
to your environment. ( with '*' your perl version )

It's working
It's working!!!
With a little help, I got it to work !!!
Have a look at http://cuba.calyx.nl/~jsummers/ROMkitchen
I just created my first ROM!

Hi, I tried create 4.00 based Rom on Jeff web and it works... thanks.
I discovered only small problem, that there are not installed links in Programs to extra included programs. But I can do it manually for now.
I tried to start my version of romkitchen on my notebook but I was stopped on integration PHP to IIS. I tried some last installer php-4.3.2-installer.exe for Windows but I got CGI error when I tried to access index.php. I'll work on it.
I hope that it will run too, like mkrom on Cygwin.

aleho said:
Hi, I tried create 4.00 based Rom on Jeff web and I works... thanks.
I discovered only small problem, that there are not installed links in Programs to extra included programs. But I can do it manually for now.
Click to expand...
Click to collapse
Ah, you haven't noticed that we put these in subfolders maybe. Go to Programs, and you should see subfolders. If you unchecked the option to put in these subfolders, then you have also unchecked everything 'below' that, meaning you haven't installed these programs.
I tried to start my version of romkitchen on my notebook but I was stopped on integration PHP to IIS. I tried some last installer php-4.3.2-installer.exe for Windows but I got CGI error when I tried to access index.php. I'll work on it.
I hope that I will run too, like mkrom on Cygwin.
Click to expand...
Click to collapse
Go for it...

Ah, you haven't noticed that we put these in subfolders maybe. Go to Programs, and you should see subfolders. If you unchecked the option to put in these subfolders, then you have also unchecked everything 'below' that, meaning you haven't installed these programs.
Click to expand...
Click to collapse
I had unchecked only few of programs to fit in ROM 4.00 free memory.
But folders in Programs like Phone, System tools,... were not in this case created, but they were checked.

jeff: great work...
one bug i found: when i disable the modify rom and add programs i get an error: Warning: Invalid argument supplied for foreach() in /home/jsummers/public_html/ROMkitchen/processor.php on line 480
i wanted to get the orig 4.00.05 rom without modifications
Jabba

REQUEST: zipped Kitchen
Hi !
Thanks all developers! Great work
One request though: please put a zipped version of your ROMKitchen at your ftp -> downloading hundreds of files is a mess *g*
Thanks... Jabba

This is so frustrating: I had it working perfectly, and now all of a sudden it stopped working. I'm working on it...

It's working now. Not really sure what was up, but it seems to have fixed itself.
Nice!!! These new ROMs are sooo cool. All the programs are stored in neat subfolders with icons....
I did find that D9 and PocketCHAT (The EVB apps) do not yet work on WM2003. It complains some EVB shared files are still missing.

Hi Jeff, just to say I've successfully used your ROM builder principally it has to be said to get hold of 4.00.05 so I only choose the Hot Fix item.
Checked in startup (which I've not looked in before) to see the hotfix and its there, there is also aFlashman, cFlashman Handsfree poutlook, SMSReciever, stk & Ussd. Are these part of the normal ROM? Just want to check that the thing is running as lean and clean as it can.
Many Thanks

mkrom (Extract of Rom Kitchen) Add files question

Hi All
I hope someone can help with the following problem.
I had wanted to use Mkrom on 2003 roms but after encountering problems with rom addresses and on KP2L's advice I switched to the "Rom Kitchen" as the code has been updated to handle 2002 and 2003.
I did not want to run the whole thing as I don't know much about Web servers on Unix so I just downloaded the 2003 directory and added back the missing folders and tools. After converting the files I am able to run ./mkrom.sh and make a "raw" .nb1 image that loads O.K to my XDA
The problem starts when I try to add files.
Trying a simple example of just placing ssnap.exe in the files folder and not bothering with links/ subfolders etc ./mkrom seems to work in as much that it picks up the files>transfers them to files 1/ 2 adds the files from cfg and > to the XDA1/2 .bin together with xip and loads to the rom under XDA_Developers 1/2. When this Rom is installed the XDA freezes at the bootsplash screen (Not completely, if you press the volume button it comes up to the start screen but the screen is miles out of calibration and most of the menus are missing) To test this further I downloaded a rom from Jeffs kitchen and stripped the files for the cfg/files folder and re-ran ./mkrom.sh but I get the same problem .
I have run lots of UltraEdit "Compare" reports,of all of the cfg/dumprom output files, between mine and Jeffs, and apart from some addressing differences all the data is getting to the rom. (I can post the reports if anyone wants them)
I suspect, although I'm useualy wrong, it's data "type"/ conversion conflict and wonder if under a full Rom Kitchen the files are converted in some way before being placed in the files folder prior to ./mkrom processing ?
As a last resort, I guess, I will have to set up the Web server (I have got one just never used it) and do the whole thing but hope to avoid it with a bit of help.
PLEASE :?: :?: :?:
Thanks
Richard

O.K I guess the question was too long/boring lets try this:
Do the scripts in Rom Kitchen make any changes to the files to be added to rom prior to processing by ./mkrom.sh
Richard

Richjn said:
Do the scripts in Rom Kitchen make any changes to the files to be added to rom prior to processing by ./mkrom.sh
Click to expand...
Click to collapse
No: the script basically just sticks the files into /files and then runs mkrom.sh
Not sure why your scenario isn't working, it sounds like it should...

Edit .mui file's....

I whant to change something in that mui file but when i open it with resourche editor i see something like (\0x00) or (000)
after some words..
When i edit this words i can't put buck those 000
Example :
22372, "1\0x00"
22373, "2abc\0x00"
22374, "3def\0x00"
22375, "4ghi\0x00"
Also i have Microsoft Visual Studio 2005 & Pocket PC SDK.
In Microsoft Visual Studio 2005 doesn't show those 000, but if i edit with Microsoft Visual Studio 2005 when i go to sign the file give's me error.
Error: Signing Failed. Result = 80070057, (-2147024809)
Click to expand...
Click to collapse
Please any one to know something about that tell me...
Thank's for your time.

Never ever ever use VS to edit resources! It screws up dialog templates and makes MUIs unusable.
The only good way to edit an MUI is Platform Builder. You can download a free evaluation version that will run for 180 days, but even with most options striped on installation it is still around 1GB.
Hope you have a good internet connection.

what version of Platform builder i need to edit mui files from WM 2003 ?
i see difrent version like: 5, 4.2 and other
but i dont know what chose

levenum said:
Never ever ever use VS to edit resources! It screws up dialog templates and makes MUIs unusable.
The only good way to edit an MUI is Platform Builder. You can download a free evaluation version that will run for 180 days, but even with most options striped on installation it is still around 1GB.
Hope you have a good internet connection.
Click to expand...
Click to collapse
Thank's Levenum ...
I sucesfull download the Windows Embedded CE 6.0 Evaluation Edition but it is say This download is a plug-in for Visual Studio 2005 ...
So what i 'm doing??
I nead the Windows Embedded CE 5.0 ??
I also download the 5 version but at the end give one error and say something like:
the download file have been interuptut before the installation finish...
So what can i do and what for those two version i have to download and if you know how can resolve the error problem on version 5??
Sorry for
&
Many many thank's Levenum

Ok i download and install the platform builder 5.0 but when i load the mui file after do my change's and go to save it he say me:
''Cannot save the file.
Cannot load a resource from the executable.''
So what i'm doing wrong??
Thank's adn sorry again....

I explained this in a PM, but just in case others are interested:
Possible causes are:
1) MUI was signed when you edited it.
2) MUI was extracted using WM5test tool by mamiac. (This tool is excellent for dumping ROMs for viewing but files can not be used on the device)
3) PB sometimes does that for no apparent reason (at least to me)
Get another DLL one that is not signed or dumped from device, delete any resources it has and put the resources from the MUI in it. Then save and rename.

levenum said:
I explained this in a PM, but just in case others are interested:
Possible causes are:
1) MUI was signed when you edited it.
2) MUI was extracted using WM5test tool by mamiac. (This tool is excellent for dumping ROMs for viewing but files can not be used on the device)
3) PB sometimes does that for no apparent reason (at least to me)
Get another DLL one that is not signed or dumped from device, delete any resources it has and put the resources from the MUI in it. Then save and rename.
Click to expand...
Click to collapse
Thank's for your help again Levenum but doesn't work.
I try tu build one new .dll but when i put one string (for test) after i try to save but give's me the same error.
''Cannot save the file.
Cannot load a resource from the executable.''
What else can i do ???
Please help me..
I try weeks now to edit five lines
Thank's and sorry...

Sorry, but now I am stomped. I never had PB fail to save a single string to a new 'clean' DLL.
Any chance there is some kind of access problem to the actual location where the file resides? Could it be 'read only' or under restricted permission?
This is really strange...

VipMSCRexe is a utility to run MortScript without Assigning .mscr to MortScript.exe

VipMSCRexe is a utility to run MortScript without Assigning .mscr extension to MortScriptexe.
How to Use it
Rename exe to your scriptname.exe e.g if your script name is sashimi.mscr then rename this VipMSCRexe.exe to sashimi.exe
This utility will first find MortScript.exe in Current directory and Sub directory under it
if not found then look in \Program Files and sub directory
if still not found then look in \Storage Card\Program Files
if still not found then look in root directory.
Once MortScript.exe found then find <exename>.mscr in same above fashion.
Once script found then execute command like MortScript.exe scriptname.mscr parameter1 parameter2 etc.
Advantages of this Utility
you can have only one installation of MortScript and may be all your script in one another folder.
Now if you want to call any of script copy this exe and rename to your scriptname.exe
Basically if you have script name sashimi.mscr then copy this exe and rename to sashimi.exe and put it in any folder
Root or storage card any where and run exe will execute your script you do not give any path or tell where it located etc.
To me MortScript.exe only support one parameter where as this Utility support multiple parameter
Version 1.0
Initial version
Version 2.0
Make changes so that Arguments are passed properly
Performance Improvement using config file
Version 3.0
Performance and Special Chars Handling in Mortscript's Path
Version 5.0
Performance improvement Using registry values
Version 6.0
Fixed Langeuge issue
Fixed Error Handling Routine

Very interesting. I have several uses for this right away so I'll download it and test. Many thanks for sharing!

Just want to note that although this is a fine tool (I'm using it for SASHIMI), if you DON'T need to pass parameters to your program you would be better off to use a renamed Autorun.exe file from the MortScript download.
The only reason I say this is becuase of the delay that VipMSCRexe has when locating/opening the script.
But, if you need to pass parameters to your script, this is the tool!

Don't work in my PC "System.ArgumentException: URI formats are not supported"
In smartphone with WM6.1 is the same error

hurtavy said:
Don't work in my PC "System.ArgumentException: URI formats are not supported"
In smartphone with WM6.1 is the same error
Click to expand...
Click to collapse
Don't work in my PC "System.ArgumentException: URI formats are not supported"
Only Supported for Pocket PC's not for desktops
In smartphone with WM6.1 is the same error
SmartPhone and WM6.1 I am not sure you have smartphone or Wm6.1
Can you please let me know which phone you have?

I have Motorola MPx200 with WM6.1 Standart Russian.
Error message is in russian language. Translate:
System.ArgumentException: It is not possible to show the error message, since it is impossible to find its containing additional assembling of resources in System.IOath:InternalCombine()...

Do you have .netCf 3.0 installed?
hurtavy said:
I have Motorola MPx200 with WM6.1 Standart Russian.
Error message is in russian language. Translate:
System.ArgumentException: It is not possible to show the error message, since it is impossible to find its containing additional assembling of resources in System.IOath:InternalCombine()...
Click to expand...
Click to collapse
Do you have .netCf 3.0 installed?

v3patel said:
Do you have .netCf 3.0 installed?
Click to expand...
Click to collapse
No. Only .NETcf 2.0

I do not have smartphone to test but can you try changing your languegue to english and then try. I just want to see is it languege problem or somthing else.

Posted Version 6.0
Posted Version 6.0

v3patel said:
Posted Version 6.0
Click to expand...
Click to collapse
You Can make it run in Win-CE ?

Great App.
But I have a same problem, it delayed 3-4 second before running a script.
Hope that you can fix it!
Thank u.

blue1311218 said:
Great App.
But I have a same problem, it delayed 3-4 second before running a script.
Hope that you can fix it!
Thank u.
Click to expand...
Click to collapse
Me too, I know that you may have heavy code inside to do like path checking & etc., may be another version with just execute the .mscr in same folder as MortScript.exe & <VipMSCRexe>.exe ?
Many thanks for this great app.,

Thanks, that the thing I need~~~

Hope you can me help
Hello,
i have program in the startup of my WinCE 5 Falk GPS. After the Hard Reset, has a Error. And the text:
Script \Temp\0084Script.mscr not found, waiting for existence (Storage Card not Initializied?)... After 3 sec. my falk stops.
Sry for bad english, im german.....