When I put in my SD Wifi card into it, it doesn't seem to work. I know that my SD WiFi card is working as it works when I use it on a XDA II.
I went to check the Network Card on the Mini, it does not have the SDIO WLAN adapter in it. Is this normal? Does it mean that I have to install the adapter myself? Where can I find the adapter for XDA II Mini????
Thanks for your help as I am really new to this.
Crus
crus said:
When I put in my SD Wifi card into it, it doesn't seem to work. I know that my SD WiFi card is working as it works when I use it on a XDA II.
I went to check the Network Card on the Mini, it does not have the SDIO WLAN adapter in it. Is this normal? Does it mean that I have to install the adapter myself? Where can I find the adapter for XDA II Mini????
Thanks for your help as I am really new to this.
Crus
Click to expand...
Click to collapse
Install this...
copy to device through ActiveSync explorer.
Goto device's File Explorer, look for the CAB file that you just copied.
Tap on the file to install.
Sandisk Driver
I have an XDA Mini, downloaded and installed the latest driver from www.sandisk.com, have tried both the Wifi, and the combo wifi card, the wifi works well. The combo also works okay, although does have some lock ups, but IT DOES WORK!!!
I have been tyring to export ROM without doing any harm to device as only have it on load for a few more days, as want to bring the SDIO driver accross to my XDA2.
Have noticed the BT is having problems also, and would envisage an update is coming for this to bring up to new version that is on XDA IIs.
henrylim:
Install this...
Click to expand...
Click to collapse
Thanks.
I shall try it when I get off work tonight.
Thanks again.
But one more question, does anyone know if the WLAN adapter should come with the XDA Mini?
You have to install the driver first .
After that no problemos
it work fine ( WifiFofum work very good !!!)
Re: Sandisk Driver
lampard said:
I have an XDA Mini, downloaded and installed the latest driver from www.sandisk.com
Click to expand...
Click to collapse
Hi,
the latest driver from sandisk that you have mentioned, is it this?
http://www.sandisk.com/download/Drivers/wifi/256mb-setup03.exe
or something better?
I'd tried this before in WM2003SE 2.06. No dice. If it works in Magician, I'm inclined to hope that the SDBus drivers has been updated, and (cross my fingers) that SDIO H/W slot is the same.
hmm....something more to be cheerful about during Christmas...
Yep, have a tried a few different versions, and all have worked okay. I had to give back the Mini before I could find the SDBus drivers, as had a similar idea for the XDA2.
Thanksfully still have a XDA2s to play with for a while.
Different version of SDIO drivers
lampard said:
Yep, have a tried a few different versions, and all have worked okay. I had to give back the Mini before I could find the SDBus drivers, as had a similar idea for the XDA2.
Thanksfully still have a XDA2s to play with for a while.
Click to expand...
Click to collapse
I wonder why I didn't look at this before.
The Mini and JAM has the same version of SD drivers:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\SDIO]
"SDMemory"="0.25.00"
"Common"="0.25.60"
"SDBusDriver"="BSQ 1.2 + 0.25.00"
Whereas the 2.02/2.06 has these version:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\SDIO]
"Common"="0.15.10 HIMA"
"SDBusDriver"="0.15.00 HIMA"
Anyone can confirm the 2.20tl version?
The drivers are in the ROM though, and it's not a simple search and replace operation.
I wonder, would it be worth to upgrade the Himalaya with Magician ROM???
I'd quite a few pple now that says that the 256MB SD drivers for PPC 2003 works with the Mini now. I've tweaked the registries for the Himalaya, but only get as far to allow the wlan tools to recognise the card..still no joy.
Guess what...sd wifi of (256 combo) working....
I've managed to get the Wifi portion of the Sandisk Wifi 256 working
on my 206 ROMed XDA2 device.
The steps are abit complicated, so try at you own risks!
The steps are:
(a) download the sandisk 256 drivers from www.sandisk.com (256mb-setup03.exe)
(b) remove your XDA2 device from the cradle, and execute the file.
(c) Goto to the Microsoft ActiveSync folder, and look for this folder "SanDisk Corp\Wi-Fi_WINCE400"
(d) Within this folder, there is a Pegas.2577.CAB
(e) Using WinCAB Manager, open this CAB file
(f) Within the Pegas.2577.CAB file, there is another "SDBusDriver12.CAB" at file index 5.
(g) Now, download the Magician ROM (the SD card version) from the forum's ftpsite.
(h) Using dumprom, dump the contents of the Magician ROM and locate 2 files "SDBusDriver.dll" and "SDMemory.dll"
(i) Replace these 2 new files with the ones in the "SDBusDriver12.CAB"
(j) Re-save the "SDBusDriver12.CAB" and replace the file in "Pegas.2577.CAB"
(k) save "Pegas.2577.CAB" and connect the XDA2 device back to the cradle.
(l) install the Sandisk drivers following the prompts.
(m) Soft reset the XDA2 device when done.
Insert the 256MB+Wifi SD card, and activate the Wifi !!!
You might find that I've gone the long way as I have yet to figure out the full implications of the setup. It doesn't replace the original DLL files in /Windows as the 2 files are installed as CUSTOM SD drivers.
Perhaps we can pool our brains together and crack the SDMemory portion.
I am surfing on my XDA2 device using the Wifi as I am writing this, so I believe we are close to the verge of cracking this.
hello,
I recieved my s100 with the sd wifi/storage card and trying to setup a wifi connection.
I installed the sd drivers and i scanned for an wifi accespoint i noticed that my neigboars are having a wifi acces point.
but i get this message:
unable to obtain a server assigned IP adress.
what i'm a doing wrong?
I can't get wifi to work!
hello,
I just can't get the thing working
I tryed the following:
I installed the driver from scandisk that was on my cd ( the same as mentioned here) everything goes well but i looks like he doens't install the pegas stuff.
I do get a wifi connection link ( settings ->connections -> sandisk wifi
I alsow tryed the tutorial of henrylim but i get stuck at point c becaus there are no files in my activesync folder.
I did try to find wifi networks and i did find a netwerk from my neighboars, i saw there connection if it was securred and mac address an everything.
I didn't get a IP address
@ the AP Browser part i saw it and the connection was 33% there.
But when i go to the status it doens't show anything but that the device is Associating and then the network name.
if i than try to use the internet it wants to use gprs and not the wifi card.
can anybody plz help me I would really like to use the wifi on my magican.
Do you have a DLINK AP ?
If so, ithey do not get along very well
brilca said:
Do you have a DLINK AP ?
If so, ithey do not get along very well
Click to expand...
Click to collapse
i don't really know what you mean.
i was talking about the standard sandisk software and there is a tab called "AP Browser"
what is the brand of the access point wi-fi that you have ?
brilca said:
what is the brand of the access point wi-fi that you have ?
Click to expand...
Click to collapse
bussy deciding whitch one to buy, I'm now trying to access the neigboars netwerk.
Unless your neighbour has specifically allowed you access to his network you will probably not be allowed to connect.
And as long as you're trying with your neighbours access point, brilcas question about the make of the access point would apply to the one they have.
OK I had a wifi connection.
my brother turned his laptop into an AP and i had a connection with it.
So I know the wifi on the imate works but there's still one problem.
When i was connected with wifi and i tryed IE explorer it wanted to connected by using wifi.
How can i change that into wifi?
eltinio,
I am still trying to get WiFi to work on the WM2003SE UK XDAII version...
In response to your question, you need to tap Start > Settings > Connections and then tap Connections (make sure your WiFi card is in and enabled).
Tap the Advanced Tab and then tap the Select Networks button, from the first drop down list select My Work Network and then tap Edit.. > Proxy Settings tab and then tap the 'This Network connects to the Internet' checkbox and then tap OK to save and OK again to exit the connection manager.
You will no be able to browse the internet...
henrylim,
Could you post a link to the WiFi drivers you cooked or provide the file in this thread please so we can all test it out as most people may not able to perform the tasks you have listed to enable the WiFi drivers.
Thanks in advance,
Godz
XDA Mini and SD Wi-Fi
Do you guys know if the SD Wi-Fi card Sandisk or Sockets supports WPA encryption when added to the Mini and also if the problems with Dlink 54G/B wireless access points have been fixed yet?
Related
Please help me make my Sandisk 256+wifi work on my XDA Mini.
All the time i want to enable the wifi i have to reset the deive then insert the card...after inserting the green light apperas but when i want to configure it byit's software by clicking on the antenna below the screen the device freezes so i have to eject the card then device backs to normal state.
Please help to have the latest driver or additional software and assist me to make it work..
Regards
ROM: 1.12 O2 Xda Mini
Hi:
I don't have one, but i went to www.sandisk.com and found this, before i bought the card:
http://www.sandisk.com/pdf/retail/wi-fi-sd-compatibility.pdf
Sorry mate, it is not compatible!
Only the version without memory..
Bye
Driver
It's compatible..cause in the list for MDA compact which is as same as XDAii Mini bith cards are compatible...
Still looking to find stable driver and solution
Regards
Mine Combination is working fine....
Using German 1.12 ROM and latest driver from sandisk.com
Stefan
Sorry you are right they are compatible! my mistake!
Good luck
Glad to hear at least one person can work with it..so how can i obtain your ROM?
Hi
I have the same problem a few weeks now.
Before it worked great no problems at all.
i have the latest drivers and using rom 1.11.00
Don't know what's happend why it doesn't work properly anymore.
grts leon
LumpiStefan said:
Mine Combination is working fine....
Using German 1.12 ROM and latest driver from sandisk.com
Stefan
Click to expand...
Click to collapse
You mean you don't have to reset your device for working with it?
will it be detected everytime you turn on your MDA?
Have it hanged ever?
So why mine doesn't work?
Hi
Remove the drivers from your PDA by going to start-> settings->system-> remove program. Select the entries for the Sandisk card and remove them. Soft reset your PDA and then try the drivers from the website for PPC 2003.
After the driver has been installed. Please do another soft reset of the PDA and then insert the card.
Here is the configuration that should be on your PDA. The bluetooth support should be disabled. Tap on the two arrows on the top of your PDA. go to settings-> click on connections and then the advanced tab. then Tap on the network card to connect to your access point (AP). AP browser will be grayed
out, This is normal as we didn't develop a utility for pocket pc 2003. Make sure you have the automatically connect to non-preferred network option checked. If there are no items listed in the wireless networks box you can add your AP by tapping on "Add new Setting" Type the network name for your wireless network. You can find this in the configuration of your router. After you enter the name make sure "connects to" is set to "The Internet" and then tap on the authentication Tab. If you are not using the wep key, you can uncheck the box for wep. If you are using it on your router make sure to set it exactly the way it appears on your AP. When you finished making all those changes please tap on OK that appears up at the top. IF your AP is on, and within the range, you should see connected next to it and the tower to the left of it will have a
blue ring around the top. If you see a red X on the tower and it shows unavailable you should check the following:
1-IS the AP on
2- Is it in range 3- are your settings correct.
Once you see the connected next to your AP you can tap ok twice and begin using your wireless access.
It works for me
Grts Leon
read more: http://www.softick.com/news.html#83
Re: Softick Card Export II version 2.11! Now working on Wiza
dddrko said:
read more: http://www.softick.com/news.html#83
Click to expand...
Click to collapse
It still makes my wizard to lock up...
Re: Softick Card Export II version 2.11! Now working on Wiza
bolasz said:
dddrko said:
read more: http://www.softick.com/news.html#83
Click to expand...
Click to collapse
It still makes my wizard to lock up...
Click to expand...
Click to collapse
It works for my 838.. I have lockup and unable to switch to SDcard mode only if I connected to my PC and activesync once and unplug. But that seems to be the activesync issue in my 838 which fail to free itself from unplug from PC. So it cannot switch to SDcard mode..and prompt me an error message.
I have already switch to AS4.1 but does not improve my situation.
What is Microsoft doing here?? :roll: A soft reset is the only way to get my device syncup again.. :x
I own this program since I had my XDA mini ...
finally I can use it again to copy some files to my pda and use it as a memory stick...
I also noticed some problems:
1. after I connect the USD cable and the PC recognized my pda as a memory stick, Windows XP asked me to make a reboot in order to be able to use the new 'harddrive'
2. after I copied a .jpg to my pda it looked like the storage card is no longer recognized by WM5. The icons of the shortcuts to programs I installed are missing and I cannot browse with TotalCommander to my storage card.
After disconnecting the USD cable, my storage card could be found again - is this a bug or a feature?!
After the first connect in mode 'Card Export' I switched to 'Active Sync' and the synching went on without any problems.
After agains swithing to mode 'Card Export' my Wizard gave an error message, as follows:
"Cannot switch between Card Export and Active Sanc modes. This may be because of missing dlls or corrupted registry entries."
This looks also to me like an incompatibility between card export and active sync.
Hmpf ... rebootet the phone and connected - voila - my Wizard was again properly verified as Memory Stick and I again could upload another .jpg to my device.
It looks definately unfinished ... but it is working quite acceptable to me, though there is a lot room for improvement, it will get the job done, if I need a memory stick 'on the go'.
My device is a HTC Wizard, O2 german.
i may be wrong on the second point, but activesync alters a file when you transfer it to the pda,
so if you transfer a file to the card (even using a card reader) then put the card back in the pda wm5 will not recognise it properly.
point 1 should only happen the first time of detection.
have no problem with my XDA II...
Chris09 said:
After agains swithing to mode 'Card Export' my Wizard gave an error message, as follows:
"Cannot switch between Card Export and Active Sanc modes. This may be because of missing dlls or corrupted registry entries."
Click to expand...
Click to collapse
I am experiencing the same... Please update this topic if you'll find a solution.
i'm having the missing dlls dialog problem too.
I noticed that once you activesync'ed, you can't switch to card mode and need to reboot the device.
However, mine can't seem to work anymore. It won't even switch. But I also tried disabling my today's screen (pocket plus and pocket breeze) and it works... but only the icon manage to change. My PC can't detect it as a mass storage device though.
Any luck?
Mine is working fine, I got that dll message once but a soft reset fixed it.
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
vmirage said:
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
Click to expand...
Click to collapse
I get exact problem, detects a HTC device, trys to load the USB Mass Storage Device, hang for a short period and then in Device Manager show up with a problem. Fails to install or display drive letter for SD Card in phone. Have tried everything, happens on XP and Windows 2000 PCs, tried various PC's, same problem.
Can anyone help
p.s - I have the T-Mobile MDA Vario phone, same as imate-kjam I believe.
eilz said:
vmirage said:
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
Click to expand...
Click to collapse
I get exact problem, detects a HTC device, trys to load the USB Mass Storage Device, hang for a short period and then in Device Manager show up with a problem. Fails to install or display drive letter for SD Card in phone. Have tried everything, happens on XP and Windows 2000 PCs, tried various PC's, same problem.
Can anyone help
p.s - I have the T-Mobile MDA Vario phone, same as imate-kjam I believe.
Click to expand...
Click to collapse
Same here too!! using ver 2.12
ver 2.11 worked fine with me, so most probably I will downgrade to it now.
I emailed the tech support and waiting for their reply. I will post it here in case I get anything new.
I just tried v2.12, and it didn't work. I found v2.11 on some download site, and installed it. v2.11 worked fine on Qtek's 2.8.7.1 ROM.
I cant get this to work either using 2.12. I get the device manager problem as mentioned previously. Does anyone know where can i get 2.11 from?
found it here:
http://www.softick.com/files/CardExportPPC211c-softick-en.zip
but i get the same problem
You can find previous versions in the "download" section on the left.
I'm having the same issues, used to work fine with 2.11, then it stopped being able to write but could still read (this is on my Mac), and now with 2.12 I can't even get the thing to mount. I'm talking with the developer to see if we can get a fix.
Any 2.12 and 2.11 not working for me... My computer and three others shows me message that they don't have drivers
I posted a query on their forum.
Heres their reply:
http://softick-forum.com/viewtopic.php?p=35#35
pewe said:
I posted a query on their forum.
Heres their reply:
http://softick-forum.com/viewtopic.php?p=35#35
Click to expand...
Click to collapse
I'm a bit confused regarding their reply.
You asked a question about the Wizard and they replied saying they are waiting on delivery of HTC Universal to examine it better. I'm not sure what the Universal has to do with compatibilty for the Wizard as they are completely different devices with different hardware. (Mybe i'm wrong and the hardware components that Card Export uses is actually the same on both devices)
Puckster -
I noticed this on second look, and asked for clarification.
just want to inform everyone that there is a free alternative. it's similar to softick card export that it turns your device into a plug-and-play card reader. it's called wm5torage (yes, the number '5' is the letter 'S')
http://forum.xda-developers.com/viewtopic.php?t=45411&highlight=wm5torage
it does not have the system tray icon that enables you to switch between activesync and export mode, but rather you open the app in your accessories folder and activate/deactivate it from there.
but hey, it's free and it works
Hi,
I've got an Orange M500, upgraded with the Imate ROM 1.12.00WWE - ever since I upgraded the ROM, I can connect to my Orange GPRS service fine, however, if I disconnect then try to reconnect again, the connection fails. I have to turn on flight mode, then turn on the radio again in order to get GPRS access.
I've tried upgrading to Radio 1.13.00, but still no joy.
Any ideas?
Mine does that and I have the original ROM. A bit of a pain isn't it.
Here's the fix
This was originally posted by Peter for the imate JAM.
I just installed it and it's working like a charm.
1. Download the older version of caller-id from:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
and transfer it over to your device. Any directory is Ok. I used ActiveSync to put it into the My Documents folder.
2. Remove the file IA_CD-Startup.exe from \Windows\Startup on your device.
3. Rename iacontacts.dll to something else (e.g. old-iacontacts.dll). This file is in the \Windows directory of your device but is hidden. However you can rename it using your PC. Open Windows explorer, and navigate to Mobile Device>My PocketPC>Windows.
4. Rename displayCID.dll to something else (e.g. old-displayCID.dll). Access it via your PC the same as for the previous step.
5. Soft reset
6. Run the CAB file on the device - just tap on it.
7. Soft reset.
That should do it.
I have the same GPRS problem too. However, the link you provided just asked for the password to access that ftp. Hey, acs540, do you know the password or do you have that CAB file? Thanks in advance.
usernameassword is xda:xda
The fix in this post seems to refer to caller id!?! I too get the gprs connection problem and have made it better with different roms but not found a sure-fire fix.
If anyone has a patch that fixes this, please post it!
GPRS now working
Hi,
Finally I tried, or at least halfway, After I removed the CallerID everyone is talking about my Qtek9090 now works flawless regarding GPRS.
This is very interesting that Caller ID software makes GPRS not working
Anyway, now I can start and stop GPRS several times, I have now toggled it 10 times without any problem.
Before I had to reset/toggle radio to make it reconnect after a disconnect.
Thank you all that has investigated this problem!
One last thing, Do you really need CallerID? :roll:
Br
Lars
I don't use Caller_ID, but Photo Contacts Pro.
Did you also try to change GPRS slot (Class 8 or Class 10) in GPRS settings?
XShell said:
I don't use Caller_ID, but Photo Contacts Pro.
Did you also try to change GPRS slot (Class 8 or Class 10) in GPRS settings?
Click to expand...
Click to collapse
Well, yes, I have changed to Class8 (4R1T), default was (I belive) Class10
Br
Lars
I'm got yesterday Wireles LAN Card SDIO 802.11b.Problem is that i can't connect my Qtek 2020 with this card.Can somebody help me about this problem?Thanx
Have you installed the drivers on your device? The card should have come with a CD, if not go to the manufacturers site.
Can you detect any networks?
Please describe the problem more precisely, and maybe someone can guide you better then this.
I'm totaly new in this.I tryed to folow instructions in manua.I instailed all drivers that i have recived,but still i can not find network and i have one wireless in my house.My main problem is that i don't know how i can make set up in my Qtek 2020.Thankx for any sugestion
Ok, I never actually used a separate SD card, but I just finished setting up my home network last week so I'll try to give you some pointers until someone more knowledgeable comes along.
1) If everything was installed correctly, you should get a new icon, in settings or programs (depends on the card I think) for the Wireless utility.
There should be an option to turn it on and off, so make sure its on.
2) If you are not sure how your network is configured, or just don't want the hassle of manually setting up the device, download Hitchhiker.
http://www.kasuei.com/hitchhiker/ its a free app that will automatically configure WiFi and connect you to the network. You will need .NET CF2 installed for it to work.
Also you can see any networks that were detected in Start->Settings->Connections->Network cards. You can choose there which one to connect to or manually configure the settings.
Thank you mr.Levenum!!!!
I will download tomorow this progam and i will try to connect SD card with Qtek again.I hope that will working well.Thank you too much for your help. Best regards
Hi!
I followed all instructions,and i instaled drivers and utiluty from instal cd.Problem is that my Qtek can't find any avalible wireles network and i have one in at home.I put all correct parameters for this network,but still nothing.I also tryed with program"Hitchhicker",but problem is the same,hi can't find any network.Have you any sugestion what more i can try.Thank you
Try checking the settings on you router.
Is it set to broadcast SSID?
What standard is the WLAN card B / G ? And what standards does the router support?
Also it is possible that your router is set to a channel the WLAN card does not support (my router supports up to channel 14, but my Jamin only up to 11)
Try using a different channel.
hi everyone...I have a Fujitsu Siemens Pocket LOOX N100 that runs on wm5.I wonder if somebody knows a way to get it into service mode because I want to replace the GPS software that comes with the unit, not only because the maps are way out of date, but because the don't have a map for my country. I would like to install iGo because I have it on another GPS and I love it...
Thanks in advance...
Loox N100 does not run WM 5.1 but WinCE 5.0
To access the device you need to enable ActiveSync und the device.
I join two CAB files in order to enable or disable ActiveSync.
Just rename the file you need to MN6-update.cab and put in root of miniSD card (save original one first) and reset device.
After that you can access the device via ActiveSync and install whichever software you like.
If you want to enable ActiveSync and start on a clean desktop you should use the CAB file attached.
In there you have
REGEDIT4
[HKEY_LOCAL_MACHINE\init]
"Launch50"="explorer.exe"
Click to expand...
Click to collapse
Sascha
first of all I want to thank you Sabo, I'm really looking forward to get back from my trip and test those cabs...
but first let me see if I got it wright:
1.the loox_n100_enable...zip are the files to enable/disable the activesync, but would I have access to the WM menus??I ask this because the N100 starts in a kiosk mode
2.the MN6_update.cab - is going to start the N100 in explorer mode not kiosk??
I have a Loox n110 running TT6 and I got all my hacking info from here . It's a very long thread going back 3 years but it has everything you need to know. I installed the iLooks desktop starting off with the Active Sync cab trick as mentioned to access WinCe.
Hope you find it useful.
hi..thank you very much guys for all the help...until now I wanted to sell the n100 but now I'm again very happyyyy, I can barelly wait to start experimenting...
Forgot to mention that with a Mini SD to Micro SD adapter I can run a 16gb memory card on it so you can really load it up - no wifi though.
d3nika said:
let me see if I got it wright:
1.the loox_n100_enable...zip are the files to enable/disable the activesync, but would I have access to the WM menus??I ask this because the N100 starts in a kiosk mode
2.the MN6_update.cab - is going to start the N100 in explorer mode not kiosk??
Click to expand...
Click to collapse
1. No, just access via ActiveSync
2. Yes
d3nika said:
hi..thank you very much guys for all the help...until now I wanted to sell the n100 but now I'm again very happyyyy, I can barelly wait to start experimenting...
Click to expand...
Click to collapse
Don't sell this fine piece of hardware.
Where els do you find a PND with removable battery which is this small and where you can disable static navigation in order to use it easily for geocaching or other things.
custardo01 said:
Forgot to mention that with a Mini SD to Micro SD adapter I can run a 16gb memory card on it so you can really load it up - no wifi though.
Click to expand...
Click to collapse
I can only see the first 4 GB of a microSDHC card.
Do you have a driver in order to see the rest of the card?
Sascha
SaBo said:
I can only see the first 4 GB of a microSDHC card.
Do you have a driver in order to see the rest of the card?
Sascha
Click to expand...
Click to collapse
My mistake sorry although the system recognises the capacity of the 16gb card when I actually browse the folders not all files are showing. I forgot this as I don't use this card usually in the Loox.
It does recognise all files on my 8gb microSDHC card, however. My built in driver is "SDHC_SC2410.dll". I haven't installed any other drivers myself.
Mine is the Loox n110 with the built in flash drive of 2gb using driver "FLASHDRV.dll". Not that it would affect the reading of the SDHC memory.
Hope that answers your question.
Hello all, I know it is a very very old topic !
But I found in my father's place this old Loox N100 piece of tech and I was trying to do some stuff with it.
I managed to access Windows CE 5 thanks to those CAB file provided about this topic.
But then I can't install or modify anything.
Can someone help me to update the maps of the GPS or install a more recent one please?
I have been searching for hours on internet but I can't find how to do. I don't understand the use of ActiveSync neither. My PC is running on Windows 11.
I tried to copy some exe or cab file to the Mini SD card, but when I want to install them from the device, I have an error "xxx is not a valid windows CE setup file"
Anybody could help me achieve something with this old tech?
Thanks a lot and sorry for the old post.
BTW: Since I used the CAB file above, I always boot on Windows CE first and also the USB connection to the PC doesn't open the SD Card anymore. I tried to use the "disable activesync" CAB file above, but it continues to boot on Windows CE and USB connection still not work.
Anyone with knowledge of this old tech can help me figure out a few things ?
At least how to revert it back to normal haha
Thanks